KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

Similar Messages

Certain scheduled tasks do not run anymore after DST change

Hi everyone,
I noticed a problem on Server 2012 after daylight savings time was set effective last weekend in March. All scheduled tasks that are configured to run weekly on Monday through Friday don't run anymore! Tasks that are configured to run daily are OK. Shall
I really put a wrapper script around the executable to check the weekday myself??? Another solution to work around this bug seems to be to set the start day after DST change day, then the weekly Jobs also run OK again.
Many Greetings
Michael

We have experienced the same issues. Just to put some more information out there (and confirm some points from above):
We run 12 scheduled tasks on 2 servers.
Machines are "Microsoft Windows Server 2012 Standard", ver. 6.2.9200 build 9200, HP ProLiant BL460c Gen8
4 scheduled tasks did fine over the DST switch in March
8 scheduled tasks failed to run
All scheduled tasks that ran were set up with
“Configure For” = “Windows Server 2012”
All scheduled tasks that failed were set up with
“Configure For” = “Windows Vista™, Windows Server™
2008”.
All scheduled tasks, both affected and unaffected, were scheduled as Weekly, Mon-Fri.
Changing the "Configure For" field after the tasks failed to run did NOT fix the problem.
Changing the time of a task after the task failed to run did NOT fix the problem
Changing the "Start" date of a task after it failed to run DID fix the problem.
Given that there are not a whole ton more complaints out on the web about this bug, it must be that the bug does not affect every instance of the scheduler on Windows Server 2012. In other words, it must be only some particular configuration
of Windows Server 2012 that causes this bug, otherwise surely there would be many many more complaints. Can people who are experiencing this bug check and post configuration info so perhaps we can determine a common factor? Thanks.

Office 2013 C2R Update Scheduled Task does not work

Hi all.
I am having difficulty getting network deployed updates to work correctly. I installed and older version of Office 2013 with the ODT from a network share and set the update path. I then downloaded an update via ODT.
The issue is the scheduled task does not update office. If I trigger or manually run from a command prompt "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection modeargs reschedulemode tasktrigger
scheduledtask updateuitype background” from Task Scheduler nothing seems to happen. Monitoring Task Manager it looks like integratedoffice is called albeit very briefly.
But, if I run "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection background” from a command prompt Office updates, but if I edit the Scheduled Task to above Office does not update if the
task is triggered.
As Office can update if the right command is given it would appear that my config.xml etc is correct. Any ideas on why the Scheduled Task does not work?
Cheers
Jakes

What permissions are set on the location of the updates ? C2R currently needs permissions granted for machine accounts as it runs under that context. This will change at some point that C2R gets updated.

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4

FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.

Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

Task does not run with transaction currency

Dear All,
When i am executing IU AR/AP elimination, I am getting error " Task does not run with transaction currency ("per TC" option reset) "
Message no. UCF5104
Diagnosis
The present task is configured so that no values are analyzed in transaction currency. However, the option "per transaction currency" is selected in the method definition. This only makes sense if you also want to analyze the values in transaction currency.
System response
The task is being executed without the option "per transaction currency".
Please advise me how to resolve the issue.
Regards,
Malani

Dear Dan,
I would like to know what will be the effect if we remove o-Per Currency option in Method.
I would like to know, in the document also in properties tab - in Key figures - Check box - Transaction Currency. If i select the warning message not coming. So kindly let me know what exactly check box -Transaction currency is used in Document type and whether it is interlinked with Method.
Thanks
Malani

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

Hi All,
I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
There are no errors in the log regarding the deployment of the DC, or the scheduler task.
There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
But I still dont see the task listed in Global Services -> Scheduler Tasks.
Does anyone know what might be causing this or how to diagnose the problem further?
Cheers,
Steve

Hi Srini,
No it doesn't it just has the run method which is generated automatically.
I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
Has anyone out there got a working Scheduler Task in a Portal Application DC?
Cheers,
Steve

Scheduled task won't run .bat file

Hi. On Windows Server 2008 I have a scheduled task that calls a .bat file. The fist step in the .bat file is write to a log file to the same directory in which the .bat file exists. This allows me to find out if it is ever run. When the .bat file is run from a command prompt it runs as expected writing to the log file and completing its actions. My problem is that when I run the scheduled task manually or allow it to run when scheduled it appears to run but the .bat file is never run. No log file is ever created. The History tab in the properties of the scheduled tasks shows the task being started and running then completing with an operation code of 2. I've disabled the UAC for the user account. I've set the task to run as the Administrator user and verified the permissions for that user. I know the password is correct for the task because I can make changes to the properties and save those changes with the username/password. I'm at a loss for further troubleshooting steps. Can anyone point me in the right direction to figure out why these .bat files are not being run?

So I had this problem, I double clicked on the .bat and notepad opened the .bat. I ran through this whole long and very absorbing thread of this forum.   I wanted to save the entries that were most helpful, so I copied and pasted into
a notepad document (.txt) I could not find a way to attach it here, so I copied and pasted that below. I called it a synopsis.... Did I spell that right?
As you can see, I added my experience at the top (A and B). The stuff I copied is noted with the original author. This is the first time I posted anything to these here microsoft forums, although I have been telling computers what to do for 40+ years.
So hope I did not break any social protocols here.
==================================== Begin ====================================
     Running A Dot Bat File in Windows Server 2008 Vista 7 etc and beyond V01
============================================================================
This was created as a synopsis of the entries at the following forum location:
http://social.technet.microsoft.com/Forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe
A) manually
     This is an opinion added by Thomas Rock
    1) Open a command window (that would be cmd.exe)
    2) In the command window navigate to the directory containing the .bat file and it's dependents
           ex... C:\Program Files (x86)\Bobs\Your\Uncle
    3) Run the .bat file by typing the name including the .bat extension (in the command window of course)
             TheBatFile.bat
       Note: Using this method, the .bat file will run in the current command window directory (the directory where the .bat file is located)
                         (this is the key for getting it to run in the task scheduler... Start in folder option)
B) The double click
            This is an opinion added by Thomas Rock
     1) Using Windows exlporer, find the .bat file
     2) use the mouse or other device to double click on the .bat file
     3) if it does not run (in my case the wordpad application opened the .bat file)
          a) make sure that the .bat file extension is associated with the program c:\windows\system32\cmd.exe
          b) make sure the profile you are using has rights to run the cmd.exe
          c) make sure the profile has the rights to the directories, the .bat and any other objects used or affected by the .bat file processing.
C) As a task using task scheduler
     Proposed As Answer by Brian Vandemark Wednesday, September 02, 2009 9:36 PM
1) Make sure that the task is set to "configure for Windows Vista or Windows 2008" on the first page of the task properties (under the "general" tab)
2) Make sure that the task is set to "start in" the folder that contains the batch file:
      a) open the task properties
      b) click on the "actions" tab
      c) click on the action and then the "edit" button at the bottom.
      d) In the "Edit Action" Window there is a field for "start in (optional)" that you set to the path to the batch file.
      e) be sure to include an end backslash for the start in path "C:\dir1\dir2\"    (the last backslash is not optional)
3) Make sure that the task is running as an account that has explicit "Full access" permissions to all these things:
      a) the .bat file itself
      b) the folder containing the .bat file
      c) the target files/folders that are affected by the .bat script.
           Note: Inherited permissions did not seem to work.
4) Make sure that the account running the task is a member of the local "administrators" group for this machine
5) Make sure that the task is set to "run whether logged on or not"
6) Tick the box "Run with highest privileges".
       Note: Point 6 here was from Edson F. Lima Wednesday June 30 2010 1:35 PM
                  The original point 6 was moved to point 7.
7) The Task should run successfully with expected output when you right-click on the task and select "run"
        If it does that then it will run successfully when you are logged off.
D) Still another way as a task using task scheduler
      Proposed As Answer byDarren Wallace Thursday, July 15, 2010 1:41 AM
This has been bugging me for 6 or 7 months.
I don't have admin rights to the box and the guy who does is very busy...
so I've felt the range of emotions mentioned above.
I tried most everything above as well. But what seemed to get my processes processing, was ...
   • on the General tab, I clicked the Change User or Group button
   • in Select User or Group (first smaller dialog box) I clicked the Advanced... button
   • in the next Select User or Group (second bigger dialog box) I clicked the Find Now button
   • in the Search results I selected the Administrators (a group) and it returned SERVERname\Administrators into the "Enter the object name to select" entry in the previous dialog box
   • then I clicked OK and returned to the General tab above
   • the options to Run only when user is logged on and Run whether user is logged on or not are no longer available
   • then I made sure that the Run with highest privileges was checked
   • then I clicked OK and during the next scheduled time to run ... it ran
   Note: See note in A) Manually above.
E) Task scheduler recommendation
     Proposed As Answer byTamusJRoyceThursday, December 01, 2011 3:42 PM
I have found .bat and .cmd files do not run correctly either.
    My solution: Don't run the batch file directly.
       Have TaskScheduler run: cmd.exe
          with parameter: /C YourBatchFile.bat
         and start in: C:\SomePath\ (without quotes!) where C:\SomePath\YourBatchFile.bat exists.
        And then select the radio button for it to run regardless if you are logged in or not.
Exit errors may not be logged to the Event Log (they weren't when the .bat ran directly from Task Scheduler when I was logged in), so I find it best to manually log your own Event in case a error occurs and you want to send an email.
REM Logs an event which causes eventlog to send an email when it fails. Also, "/l application" needs to be lowercase.
eventcreate /t error /id 203 /l application /d "your logged description."
And then make a completely separate task with a trigger: On an event. Basic Selected. Log: Application. Source: EventCreate. Event ID: 203. And have the action on this task send an email (attaching any generated log files, if needed).
Hopefully helpful (took me 3 days to figure all this out...gar)
===================================== End ===================================
     Running A Dot Bat File in Windows Server 2008 Vista 7 etc and beyond V01
============================================================================

Scheduled task going to running state in OIM

hi all,
After running the Target reconciliation it is going to running state ....how to fix this?
Thank you.

For how much time it shows Running status ?
Check the status of schedule task using http://localhost:7001/xlScheduler if OIM is deployed on weblogic on 7001 port.
I have seen couple of clients who are using OID connector and never heard such issues in OOTB connector.
Try with restarting the server.

DB13 - Scheduled Update Statistics not run - Error

Hello gurus,
I´m faccing with an error in DB13, I scheduled Update statistics every day but it did not run due an error.
I think this may resulted because an authorization problem.
In /usr/sap is with this permissions:
drwxr-xr-x 15 orad01 dba   4096 Oct 18 16:34 sap
The /oracle/D01/sapcheck is with the following permissions:
drwxr-xr-x 2 orad01 dba     4096 Nov 14 20:28 sapcheck
Inside of sapcheck directory I can see the following files with permissions:
-rw-r--r-- 1 orad01 dba       32262 Oct 14 13:16 ceeimamu.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:42 ceeisafo.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:50 ceeisazq.sta
-rw-r--r-- 1 orad01 dba        1932 Oct 15 17:58 ceeisbie.sta
-rw-r--r-- 1 orad01 dba        1791 Oct 15 22:16 ceeisyhm.sta
-rw-r--r-- 1 orad01 dba        1931 Oct 15 22:24 ceeisyta.sta
-rw-r--r-- 1 orad01 dba    19394261 Oct 15 23:45 ceeiszph.sta
-rw-r--r-- 1 orad01 dba        1930 Nov 9 11:27 ceenjunx.sta
-rw-r--r-- 1 orad01 dba        1790 Nov 9 11:38 ceenjvuv.sta
-rw-r--r-- 1 orad01 dba      143103 Nov 9 11:40 ceenjwnr.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:46 ceeosxxw.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:49 ceeosydo.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:54 ceeosyqi.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 15:57 ceeotefd.sta
-rw-r--r-- 1 orad01 dba       18530 Nov 16 16:27 ceeotgun.sta
-rw-r--r-- 1 orad01 dba         996 Nov 16 16:27 connD01.log
In DB13 at details error, it show the following statements:
Job executado
Etapa 001 executada (program.RSDBAJOB, variante &0000000000016, nome usuário XNSJAD)
Execução do comando lógico BRCONNECT No host segoviad04
Parâmetros: -u / -jid STATS20101123153214 -c -f stats -t ALL
BR0801I BRCONNECT 7.20 (7)
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: ceeqbmqh.sta2010-11-23 15.32.15
BR0280I BRCONNECT time stamp: 2010-11-23 15.32.15
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job encerrado
Can you help me please!? I do not know how to solve this situation...
Best regards,
João Dimas - Portugal

This wasn´t a new installation... this was a migration from windows/sql server to linux/oracle... and after that migration process I made an oracle upgrade to 11.2g and during this oracle upgrade we upgrade the BRtools to 7.20 version.
I set up other job from DB13 (Verify database) and also it not ran well, it show an error too, but a diferent one:
Parameters:-u / -jid VERIF20101110030000 -c force -w only_dbv -p initD01.sap -m ALL
BR0051I BRBACKUP 7.20 (7)
BR0055I Start of database backup: beeqitms.dbv 2010-11-25 03.00.06
BR0484I BRBACKUP log file: /oracle/D01/sapbackup/beeqitms.dbv
BR0477I Oracle pfile /oracle/D01/112_64/dbs/initD01.ora created from spfile /oracle/D01/112_64/dbs/spfileD01.ora
BR0068E SAP system is running or SAP user is connected to database D01 - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: beeqitms.dbv 2010-11-25 03.00.09
BR0280I BRBACKUP time stamp: 2010-11-25 03.00.09
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
I also checked the permissions in /usr/sap folder and sub folders as per the link you put here... and everything is well... but tell me one thing which owner/group must have set in /usr/sap/ directory? In that help sap link it doesn´t show any suggestion in this column, so I don´t know in this case which owner and group must have set... In my case the /usr/sap/ and dba as group:
drwxr-xr-x 28 orad01 dba      4096 Nov 23 15:20 D01
Kind regards,
João Dimas - Portugal

DAC tasks are not running in Sync.Parent - Child ROW_WID not proper.

After the completion of DAC, When I tested the reports, one of the report is not populated. The root cause which I analyzed is the child table W_product_DX is not having same ROW_WID ids as parent W_Product_D and hence the join fails to pull the child records.
When I see the log file , the custom task that populated the child table has run ahead of the parent dimension table therefore the child has not populated with new/updated roe_wid values.
Do we have do some setting in each task so that it runs in a particular order of execution....
Any ideas how to resolve this problem. Help appreciated. __.____

Did you create an entirely new custom task or modify an existing one?
If you did one from scratch you wil need to analyze the location of the other tasks and modify the order in your execution plan.
This section of the documentation covers execution order:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10759/dacdesignetl.htm#i1041265

Some Schedule jobs are not running in Oracle 10g

i have total of 8 Schedules jobs in Oracle 10g test database which were not in sync with prod database . So i re-created all of them again and then enbled them . but some 4 of them didnt ran on their NEXT_RUN_DATE . Showing NULL on LAST_START_DATE and LAST_RUN_DURATION . How to make them Run
select OWNER,JOB_NAME,START_DATE,STATE,SCHEDULE_NAME,LAST_START_DATE,LAST_RUN_DURATION,NEXT_RUN_DATE from ALL_SCHEDULER_JOBS
where OWNER='MESH_FOR' and last_start_date is NULL;
OWNER     JOB_NAME     START_DATE     STATE     SCHEDULE_NAME     LAST_START_DATE     LAST_RUN_DURATION     NEXT_RUN_DATE
MESH_FOR     REFRESH_TERMINALS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_MN_SERVERS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_EVENT_INFO_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     UPDATE_MV_CHANGES_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00

Hi,
Could you please explain, what is OS authentication?
I created a new user for creating and runing jobs.
I have given following priveleges to the new User.'
1)Connect
2)SELECT_CATALOG_ROLE
3)Create Job
Then, I created the job as follows.
BEGIN
sys.dbms_scheduler.create_job(
job_name => 'SMPL_TST_JB',
job_type => 'PLSQL_BLOCK',
job_action => 'Declare
Result Integer;
begin
Result:=1;
/* Other statments */
Exception
when others then
Result:=3;
end;',
repeat_interval => 'freq=daily;byhour=10;byminute=00;bysecond=00',
start_date => systimestamp,
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'logging_level', value => DBMS_SCHEDULER.LOGGING_FULL);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'restartable', value => TRUE);
END;
Then, I run the job as following.
SQL> begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
2 /
begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
ORA-03113: end-of-file on communication channel
Thank you,
Regards
Gowtham Sen.

Scheduled reports do not run/get delivered?

Im new to business objects. We are running XI R2 currently. I have imported some objects/reports. I can run them successfully. I have now set them to be scheduled to run once a day and email myself and a coworker. When I go to history tab and say Run Now, the reports get emailed to both of us, and look great.
However, these same reports are not being generated or emailed once a day like Ive requested. Im not getting an error anywhere (or I dont know where to look). What is causing the schedule not to run?
All my services are running (jobserver, etc.).
M

Hi Maria
Is this your clustered environment? Are you able you to schedule the same Report for short duration,
like 5 minutes or 10 minutes?
What is the type of Report your scheduling? (Crystal Report, Web Intelligence or Desktop Intelligence)
Is this problem coming with any specific report or every report?
Regards,
Hrishikesh

Server 2012 Scheduled tasks not running after DST

Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running. The schedule show the correct next run time, but the task never runs. The server correctly adjusted for the DST changes (We are in CST in
the US) and if you look in the date time it notified us that the clock was set forward.
Any ideas?

Hi Mark,
Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
did some daily scheduled tasks run smoothly?
Based on current situation, please create a new weekly
scheduled task and check if encounters the same issue.
If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
By the way, there is a similar thread. Please refer to.
Certain scheduled tasks do not run anymore after DST change
http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
Hope this helps.
Best regards,
Justin Gu

KM Scheduler Task is not running...

Similar Messages

Maybe you are looking for