[Deployer:149164] The domain edit lock is owned by another session

Hi,
I am a tertiary student currently doing a Jsp Application using Jdeveloper 11.1.1.3.0 . I am trying to run my application on the integrated weblogic server to test out my application but i keep getting deployment failure. The Error is:[Deployer:149164] The domain edit lock is owned by another session in exclusive mode - hence this deployment operation cannot proceed. May i know how do i solve this problem? Thanks alot.

Hi, I tried the way you told me but i am running my application on a integrated weblogic server provided by Jdeveloper and stated below are my error being shown to me when i deploy my application.
<May 21, 2010 3:18:59 PM SGT> <Warning> <Deployer> <BEA-149124> <Failures were detected while initiating deploy task for application 'Ipp_Project'. Error is: '[Deployer:149164]The domain edit lock is owned by another session in exclusive mode - hence this deployment operation cannot proceed.'>
[03:18:59 PM] #### Deployment incomplete. ####
[03:18:59 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application Ipp_Project due to error deploying to IntegratedWebLogicServer.
[Application Ipp_Project stopped and undeployed from Server Instance IntegratedWebLogicServer]
I cannot find my admin console for the integrated weblogic server. Thanks.

Similar Messages

Unable to Start the Weblogic Console, "The domain edit lock error persists"

Hi, I have read a post regarding "The domain edit lock is owned by another session in exclusive mode" error in Weblogic server Using JDeveloper, I am also getting the same error when I ran the JDeveloper, But to change the settings I am Unable to open the Console for WebLogic Server Administration in My System(PC).
"http://127.0.0.1:7001/console" or "http://localhost:7001/console" both are not opening. I have not Installed Weblogic Server separately but I configured My application using JDeveloper. I am getting the above error in JDev Console. I am using the JDeveloper 11g version.
Your Help will be greatly helpful to me.
Thanks,
Srinivas Reddy.

Problem is solved in opening the WebLogic Admin Console... But When I try to deploy the application Some errors Like Validation Failed for Schemas..
this type of messages are coming in red color in admin console.
can any one help on this..?

How do I change the Apple ID to my own on another account on my att plan?

I have 2. iPhone 5c'a on my mobile account. I
Need to find out how I go about changing the apple Id to my own so we can sync
the devices & locate them if they are stollen

Go to Settings>General>Reset>Erase All Content and Settings. Then setup the iPod with your Apple ID and media.
If it has iOS 7 and is asking for the Apple ID password of the previous owner you wll have to get that password.
iCloud: Find My iPhone Activation Lock in iOS 7

How can i prevent the error "mailbox locked by a pop 3 session"

how do i prevent the repeated error " mailbox locked by a pop 3 session!"

lol i think he was talking about formating your messages on the forum.
look at an example that i just created hope it helps. If not then read up on the GUI chapter of your java book.
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JTextField;
import java.awt.BorderLayout;
public class ButtonTest{
    public static void main(String args []){
        JFrame frame = new JFrame();
        JPanel panel = new JPanel();
        final JTextField textA = new JTextField(10);
        final JTextField textB = new JTextField(10);
        JButton button = new JButton("Perform Action");
        class Listener implements ActionListener{
            public void actionPerformed(ActionEvent e){
                if(!textA.getText().equals("") && !textB.getText().equals("")){
                    System.out.println(textA.getText()+" "+textB.getText());
       ActionListener listener = new Listener();
        button.addActionListener(listener);
        panel.add(textA);
        panel.add(textB);
        panel.add(button);
        frame.getContentPane().add(panel,BorderLayout.SOUTH);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.show();
}

DTR owned by another CMS domain

Hi All,
I'm doing practice of JDI administration "scenario 2+" on my local J2EE engine. The JDI is newly installed.
When I created a track and tried to save it, system indicates that "DTR server is owned by another CMS domain". From the "Domain Data" tab, we can see that CMS name and domain name are "Tst". But the Domain ID is "J2E", which is different from what is required by the tutorial. I must have made some mistake during the initial configuration of domain data.
But the "Domain ID" field is currently uneditable. I cannot change it to "Tst". What should I do?
Thanks
Jerome

Hey, I have the same problem above with jdeveloper, I can't run my session bean beacuse domain edit lock is owned by another session in exclusive mode - hence this deployment operation cannot proceed.
[12:26:09 PM] See server logs or server console for more details.
and I have no idea about how to access the weblogic server since I don't know the user name or the password, I'v tried several things but nothing helped please somebody helpe my
thanks in advance,
Nada

Oracle Service Bus 10gR3 - Failed to obtain WLS Edit lock

My question is, how do I release this lock?
The gory details follow ...
Oracle Service Bus 10gR3 on Windows 2003 Enterprise.
I am following Tutorial 1. (Sheesh, I can't even get that right!)
Around page 3-28 - "To test the Routing of the Loan Application ManagerLoanReviewService".
Point 1 says to start the server. Without thinking, I did just that.
The problem is, it was already running, otherwise, I would not have been using the sbconsole to do the editing.
Of course, it detected it was already running and didn't start again.
Problem is, after the server shuts down, the command files shutdown PointBase.
So, after a mistaken startup, I ended up with a server with no database underneath it.
Fine, I restarted it.
Now, using the activate session ("sbconsole/sbconsole.portal?_nfpb=true&_windowLabel=ViewChangesPortlet&ViewChangesPortlet_actionOverride=%2Fchangemgmt%2FSessionActivate&_pageLabel=ChangeManagement&ViewChangesPortletactivate=activate")
I cannot activate my session, as it says the following :-
Failed to obtain WLS Edit lock; it is currently held by user weblogic. This indicates that you have either started a WLS change and forgotten to activate it, or another user is performing WLS changes which have yet to be activated. The WLS Edit lock can be released by logging into WLS console and either releasing the lock or activating the pending WLS changes.
I show outstanding sesssions, there is only one.
I switch to that session.
I still cannot activate this session.
I have tried re-starting the AdminServer.
It talks about releasing the lock in the WLS Admin console. Where? How?
Thanks in advance.
...Lyall
PS. I gave up on this and simply blew the whole lot away and started again (returned to post installation and re-started the entire tutorial). However, it would be useful to know how to fix this properly, if ever I end up in the same scenario again.

Although the Undo all changes might work in some cases, it could be the case that some files still remain and are even the AdminServer could not be started.
The lock files are usually located in the domain directories.
For example
Domain demo:
$BEA_HOME/user_projects/domains/demo/edit.lok or $BEA_HOME/user_projects/domains/demo/weblogic_eval.lck
--olaf

Master Gateway node for the domain is not available

Any hints in the catalina.out, exceptions.log, node.log or domain log files?

Hi All, We are using Informatica 9.5.1 and Oracle 11g as by metadata DB. Initially our INFA_DOMAIN_REPO password was expired, so we couldn't connect to repository. Then we reset the same password and we restarted infa services also. But when we tried to connect repository we faced "Failed to connect repository" error. When i try to connect to Admin Consol, page was not displayed. When we check the node.log file it had a error message saying "2014-07-20 04:45:37,553 ERROR [Monitor Guaranteed Message Logger Thread] [CCM_10322] While logging messages to the Log Service, the following error occurred: [[DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running.]. Fix the errors written to the node.log file. com.informatica.isp.domainservice.exceptions.ISPMasterNotAvailableException: [DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running" We checked all the env variables and all looking fine.Node is also running. Please help to uderstand this issue ans the fix. Thanks in advance Regards,JP

The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!

Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Grant privileges to the user to edit only his own information

Hi all,
my Portal version is 9.0.4.0.99
I would like to grant to all users the privilege to change/edit only his own information.
When I go to the Administer Tab, enter the username in the portlet User, and then I check the checkbox: "Allow User editing", then this User can edit all users.
How can I grant the privilege to edit only his own information?
Regards
Leonid Pavlov

The Portal does not expose the DAS Edit My Profile link until version 10.1.4. Prior to this version, if the associated DAS actually supports this, you can just add the link on your portal page as a URL item:
http://host.domain.com:7777/oiddas/ui/oracle/ldap/das/mypage/AppEditMyPage?homeURL=http%3A%2F%2Fhost.domain.com%3A7778%2Fpls%2Fportal &doneURL=http%3A%2F%2Fhost.domain.com%3A7778%2Fpls%2Fportal&cancelURL=http%3A%2F%2Fhost.domain.com%3A7778%2Fpls%2Fportal
I.e., it takes the url:
<infra-host>/oiddas/ui/oracle/ldap/das/mypage/AppEditMyPage
with 3 url-encoded parameters:
homeURL - link rendered with Home icon in DAS
doneURL - target for [ OK ] in DAS
cancelURL - target for [ Cancel ] in DAS

How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

I have already tried this and it doesn't work. It only says no devices. Suppose this means that whoever stole it have already wiped the memory so they can use or sell it. Although I would think the serial number should be connected to the hardware permanently somehow. Don't know how you do that on an iPad that requires a pass code to login to.

How can i edit the domain name ?

Hello,
I tried to register my first website through business catalyst.The domain name i took was www.wildixel.com . But, when i am trying to open the website it open other website with the same name. I guess it was already taken. Now i want to edit the domain name. Please let me know how can i.
Thanks

Hi there,
Could you please explain more what you are trying to do and have done?
You can not purchase a domain name through Business Catalyst so you would have not obtained a domain you listed there. You have to by it from a domain registra.
If you have just entered a domain into the domain manager of your website but have not purchased the domain, this will not work. You have to obtain the domain first.
If you have got your domain, have you gone into the domain settings of BC and added the domain in? Have you gone to the domain registra and changed either the A-record or the NS records to point to your BC site?

How can I edit my iweb published site when the domain file is empty?

How can I edit my iweb site when the domain file opens up empty? I have the site backed up in mobile me, on my computer, and on an external hard drive.
How can I transfer these files into iweb?

Hi there,
To edit your site from one of your backed up versions, place the Domain file in User>Library>Application Support>iWeb & then launch iWeb. Update & publish.
Ben

How do I skip the tutorials and move on to editing on my own?

How do I skip the tutorials and move on to editing on my own? I accidentally indicated that I am a beginner, I'm not. But I can't find a place to fix the information and I just really need to start editing for a school project.

Hi Stephanie,
Can you indicate which software are you referring to?

Enter the forest and it locks me out of entering the domain controller or any child domains

Using Windows Server 2008 R2 SP1, no matter if I use the Graphical User Interface (GUI) or the Answer Method to enter the forest and it locks me out of entering the domain controller or any child domains.
Is there a remedy to this?

Hi Philo,
Would you please tell us that how did you try to enter the forest?
Are you able to run dcpromo to add domain controllers or create child domain?
Best Regards,
Amy

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

[Deployer:149164] The domain edit lock is owned by another session

Similar Messages

Maybe you are looking for