Master Gateway node for the domain is not available

Any hints in the catalina.out, exceptions.log, node.log or domain log files?

Hi All, We are using Informatica 9.5.1 and Oracle 11g as by metadata DB. Initially our INFA_DOMAIN_REPO password was expired, so we couldn't connect to repository. Then we reset the same password and we restarted infa services also. But when we tried to connect repository we faced "Failed to connect repository" error. When i try to connect to Admin Consol, page was not displayed. When we check the node.log file it had a error message saying "2014-07-20 04:45:37,553 ERROR [Monitor Guaranteed Message Logger Thread] [CCM_10322] While logging messages to the Log Service, the following error occurred: [[DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running.]. Fix the errors written to the node.log file. com.informatica.isp.domainservice.exceptions.ISPMasterNotAvailableException: [DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running" We checked all the env variables and all looking fine.Node is also running. Please help to uderstand this issue ans the fix. Thanks in advance Regards,JP

Similar Messages

Error: Preceding document required for the invoice is not available

Dear SRM Experts,
We are on SRM7.0 with SAP 4.6 C as backend SAP R/3 system (Classic Deployment).
When we try to create an invoice in SRM wrt a PO ( with item category B ... created from a limit SC with invoice only option), we get an error :
Line 1: Preceding document required for the invoice is not available
We are not sure ..why this error is coming and what preceding document system is checking ?
As the PO is with item category B.. the GR is not required
Any inputs will be highly appreciated..
Thanks and Regards,
Ram

Hi!
This error usually comes up when the PO has the flag GR_BASEDIV set. Please check your PO and verify if it is flagged.
Best regards,
Christian Zeuch

Invoice message Preseding document for the invoice is not available.

Hi .
when I want make the Invoice process to PO the system show the header Message
Invoice message Preseding document for the invoice is not available.
even the Po recepcion is made into SRM.
any suggestions
thanks .

Hi Oscar
It seems the PO has GR Based Invoice Verification indicator active. IN that case system will look for the confirmations/GRs for this PO in order for you to post an invoice for this PO.
Regards
Virender Singh

ICF SERVICE NODE FOR THE APPLICATION DOES NOT EXIST.

Hi All:
i am getting the following error when trying to execute my applications in abap webdynpro.
The following error text was processed in the system BIS : WebDynpro Exception: ICF service node for application does not exist
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
can anybody help me out.
relevant answers will be awarded...
Regards:
Arun

Hi,
see the information on ICF service nodes <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">here</a> and also take a look at SAP notes 517484 and 1009930 and 1008689
Regards, Heidi
For information on creating services (if they are not created automatically), see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm">here</a>
Message was edited by:
Heidi von Geisau

Windows cannot log on because the domain is not available?

I usually log into my computer with my username and password and today when i attempted to log on i was denied and recieved this message. Is there anyway to bypass this log in or anyway to get it back to normal....please help

Some viruses cause this behaviour.
usually they change registry path to userinit.exe, winlogon.exe and logonui.exe and change these filies.
Seems like you'll have to clean this by antivirus tools.
For now try booting in safe mode and entering Administrator account with blank password.
Also try pressing twice Ctrl+Alt+Del on logon screen and use logon name Administrator and blank password.
//help will save the world

Queries based on Master data for the particular periods not working

Hi,
My Queries are based on master data and for 2007 we did not have customer groups define hence for the historical also we would like to display the customer groups hence we are reproting based on master data. But when iam executing my reprots for each and every month for the 2007 , i can able to execute the reprot properly but same when iam giving the values in ranges with the help of input filed ( calender month -interval) its taking hours but unable to retrieve the data for the 6 months at a time even if iam restricting the values in the queries still the problem is same...
Can anyone has an idea what would be the problem .. its only for 6 months
Thanks

Hi
Master data report consumes much time. try to see the Query Statistics and make the performance tuning.
Recheck your data flow for routines at TRules/upRules level.
Recheck on the Query designer for formula/ Cmod Variables.
The report fetching time even depends on the NO.of records too.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dcd70-41a8-2b10-9f8f-dc5c68769753
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6009e125-e9a3-2a10-c6a9-e1483dfa2e1b
Hope ithelps

SharePoint 2013 web service: Error while sending claim based authentication request (The corresponding SID in the domain is not part of the intended account type)

We are using .asmx services for SharePoint features such as comments, and rating.
Service
Feature used
http://<<hostname>>/_vti_bin/socialdataservice.asmx
Commenting, Rating
http://<<hostname>>/_vti_bin/UserProfileService.asmx
For out of box workflows
In SharePoint 2013,
SharePoint – 80 web application is on claims based mode and user is logging in with windows authentication. With logged-in client context used to call SharePoint's default web service, we are getting below error message from
web service (Social data and user profile services).
Server was unable to process request. ---> The corresponding SID in the domain is not part of the intended account type.
When the service is accessed using console application with Visual Studio credentials (logged in user), we are able to access the service. Below is the code snippet
using (SocialDataService
service = new
SocialDataService())
service.Credentials =
CredentialCache.DefaultCredentials;
SocialCommentDetail detail = service.AddComment("<<url>>",
"Test Comment",
null,
null);
Are SharePoint 2013 web services not supporting request coming with claim based authentication web application?
Thanks, Pratik Agrawal (MAQ Software)

While this applies to 2010, I believe the same is true with 2013:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/925e5f46-317f-46d3-bc55-c67f07eb2372/call-sharepoint-web-services-using-claimbased-authentication?forum=sharepointgeneralprevious
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!

Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

After joining computer to the windows doamin i cannot change password for Mac for the domain user

After joining computer to the windows doamin i cannot change password for Mac for the domain user

Hi,
Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
progress, please let us know.
http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
Roger Lu
TechNet Community Support

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

HELP! I tunes wouldn't update so I tried to delete and reinstall. I keep getting a message stating the installation source for this product is not available. Verify that the source exists and that you can access it. please help!!

Help! Itunes wouldn't update so I tried to delet and reinstall. I keep getting a message: The instillation source for this product is not available. Verify that the source exists and that you can access it. I also get this message: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below. Help I have no idea what that means or how to fix it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The valuation area defined for the plant is not defined in table T001K.

when i creating the PO for plant ,s/m is giving the following meassage
The valuation area defined for the plant is not defined in table T001K.

Hi,
You have two options to check:
Option---1: You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign in t.code OX18 and also check the table T001K after this configuration.
Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
Now try creating PO.
Regards,
Biju K

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

Line items for the PO are not automatically displayed

Hi all,
When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
need your help
Thanks
Fayaz

Hi,
Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
In MIRO transaction, select the tab Purchase order/scheduling agreement, enter PO number and press enter.
Right hand side select the layout all information .
Regards,
Chandra

Master Gateway node for the domain is not available

Similar Messages

Maybe you are looking for