Deploying an Application with assets

HELP!
I have an application that I just completed. It has some
images in a folder called assets. They show fine when I am using
the application locally however, when I deploy the app it leaves
out the images. How can I get those images to show after being
deployed on a web server?
Thanks
EV

Hi,
Thanks for the reply. I discovered that the path had to be
within the site folder. Even when I referenced it, the images
wouldn't show. However, when I placed that folder inside the site
folder itself, everything showed up fine. For some reason, any
assets must be inside the site folder itself and cannot be
referenced if it lay outside. Oh well, it all shows now.
Thanks.

Similar Messages

  • Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

    Hi,
    I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
    installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
    I tried the following uninstall commands in my deployment:
    setup.exe /uninstall
    setup.exe /uninstall
    VisPro
    /config .\vispro.ww\uninstallvisio.xml
    “\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
    \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
    I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
    <Configuration Product="VisPro">
    <Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
    <Setting Id="SETUP_REBOOT" Value="Never" />
    </Configuration>
    Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
    Yavuz Selim Atmaca

    After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
    After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
    node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
    Yavuz Selim Atmaca
    2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and  uninstalled it succesfully.
    So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
    Yavuz Selim Atmaca

  • How to Deploy J2ME applications with data in RMS?

    Hello everyone,
    I am designing a J2ME application, a simple "Who wants to be a millionaire game". It stores questions and answers from a rms datastore. I want to to how can I deploy this application with questions and answers in the recordstore. Each time I run the emulator, the data stored previously gets deleted. Is it possible to attach the rms recordstore along with the .jar or .jad files? If so how can I do it. Please help.
    Thank you all in advance.

    Thank you Sypress.. When I install it the code works fine. But I wanted to include data with the application. I think I found a way way. I added the data in a text file and while starting the application I inserted data from the file into the recordstore.

  • The error when I deploy ess application with SDM

    SOS!!!when I deploy ess application with SDM(ESS05P_1-10002965.sca), It failed.please help me.
    The trace file:
    #1.5#00145ED221BE00F7000000B90011A07C0004421B32EEBBA8#1198584492898#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.services.webdynpro.WebDynproContainer#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/UserInterface#Java###Failed to deploy application '''' for deployment state listener ''''.
    [EXCEPTION]
    #3#sap.com/essauaddr#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to deploy the file '/usr/sap/EP1/DVEBMGS02/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/essauaddr/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Address_AU.xml' into the database. Reason: Development Object 'sap.com/ess~au' contains already same repository content. Hint: fully qualified name of the repository VMO must be globally unique.
         at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
         at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
         at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
         at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
         at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:215)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    #1.5#00145ED221BE00F7000000BB0011A07C0004421B32EF7CEE#1198584492948#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation deploy with application sap.com/essauaddr.#2#deploy#sap.com/essauaddr#
    #1.5#00145ED221BE00F7000000BC0011A07C0004421B32EF7F24#1198584492949#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation deploy with application sap.com/essauaddr.
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:215)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Cannot deploy application sap.com/essauaddr.
         at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:330)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         ... 13 more
    Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
         at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1016)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
         at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
         ... 15 more

    Check these below links
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4611860
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4562067
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4258751
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4474525
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4543091
    https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4368694
    reward points if helpful

  • How to deploy cairngorm application with FTP support?

    Hi,
    I have a cairngorm application, it works fine in my local
    computer.
    But I need to upload it to a website in my web hosting
    company with FTP,
    but it doesn't work in the hosting server because I can not
    add the cairngorm.swc file to the application.
    Please give me a idea how to deploy the application with ftp
    software.
    Thanks a lot
    Mark

    Any opinions are welcome

  • Deploying APEX application with web host

    Hi guys,
    Whats the process of deploying APEX application with a webHost?
    We got a good deal from a web host with dedicated database, it still being processed.
    Currently we have a domain name hosted elsewhere (non APEX host) . What I am planning to do is, create a subdomain with our existing web host and point it to the IP address of the DB machine the apex host will give us.
    So I am guessing the process will involve:
    1) getting the IP address of the database machine
    2) configure the my existing web hosting setup to create a sub-domain and make it point to the IP address (for example 174.184.223.441)
    Would I need Port number of the machine running Oracle DB with APEX and the local IP address (the one starts with 10.0.0.xxx) etc?
    Would be grateful if someone can share what you did given you already have a domain hosted and need to create a subdomain to make it point to another APEX host.

    Hi Jim,
    Try to replace,
    <jnlp spec="1.0+" codebase="http://localhost:8080/fileviewer" href="index.jnlp">
    with
    <jnlp spec="1.0+" codebase="$$codebase" href="index.jnlp">
    But i was using JNlpdownload servlet to do the task
    Regards
    Leo

  • Deploying an Application with Managed Libraries

    Hi,
    I am trying to deploy an Applicaition on Oracle App Server 10.1.3.
    I develop the application in Jdev 1013
    in my JDeveloper descriptor, i edit the Properties - File Groups/Web-INF/lib - Filters, i deselect the Merged contents.
    Create a war file.
    All libraries that are required [ie. present in the list JDeveloper descriptor, i edit the Properties - File Groups/Web-INF/lib - Filters,], i jar them to create Portal.jar.
    i place the jar at D:\Temp\Portal.jar.
    This location is on the same machine where the Oracle App Server Runs.
    I log into the Oracle Application Server - Enterprise Manager, and Create an entry in oc4J:home - Shared Libraries
    Specify the Path where the Portal.jar exists.
    I then deploy the Application specifing the location where the .war file is present. - procedure is Deploy-Select Archive - Application Attributes.
    In Deploy settings, i click on Deployment Tasks - Configure Class Loading, i go to Import Shared Libraries and check Portal, and then I click on Deploy.
    I then get Deploying Application Failed with the following Errors
    Aug 19, 2006 2:54:02 PM] Exception: NoClassDefFoundError: javax/faces/FacesException
    [Aug 19, 2006 2:54:02 PM] Operation failed with error: javax/faces/FacesException
    I don't understand why?
    My need is that all Libraries that are required by the Application, I Jar it and place it as a Shared Library on the Server. So whenever i deploy an application it should include the shared libraries present on the server.
    This would ensure my war file is small.
    Instead of all my applications inculding the jar files in thier respietice war files, i would like to place the requiste war in a single place on the Server and link the application to use that shared library war.
    Thanks in advance
    Vishnu

    Hi,
    Thanks for the reply. I discovered that the path had to be
    within the site folder. Even when I referenced it, the images
    wouldn't show. However, when I placed that folder inside the site
    folder itself, everything showed up fine. For some reason, any
    assets must be inside the site folder itself and cannot be
    referenced if it lay outside. Oh well, it all shows now.
    Thanks.

  • Error deploying the application with Crystal Report

    Hello,
    I'm using Visual Studio 2010 and I installed the required version of crystal report for it. I'm developing a windows Application with C# and Crystal Reports. The program runs correctly in the visual studio but when I tried to deploy it by adding the setup it gives me the following warnings:
    - Unable to find dependency 'MICROSOFT.VISUALSTUDIO' (Signature='B03F5F7F11D50A3A' Version='1.0.5000.0') of assembly 'crdb_adoplus.dll'
    +- The 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' item selected requires 'Microsoft.Net.Framework.2.0'. Select the missing prerequisite in the Prerequisites Dialog Box or create a bootstrapper package for the missing prerequisite.     +
    - No 'HomeSite' attribute has been provided for '.NET Framework 2.0 SP2', so the package will be published to the same location as the bootstrapper.
    I tried to ignore the warnings and deploy it but when I try to open the crystal report and in the program it gives me an error message then an empty report.
    I also tried in the Prerequisites to choose the option : Download prerequisites from the same location as my application. but when I do that I receive the following errors:
    - The install location for prerequisites has not been set to 'component vendor's web site' and the file 'MDAC28\mdac_typ.exe' in item 'Microsoft Data Access Components 2.8' can not be located on disk. See Help for more information.
    - General failure building bootstrapper.
    - Unrecoverable building error.
    of course In addition to the previous error.
    I'm not using the click-once deployment.
    Can you please help and advice me with that? I tried to search through the net for these warnings but with no luck of the solution.
    Thank you,

    No, .Net Framework 2 is not installed. I'm using windows 7 so I installed .Net framework 4. I tried to Install .Net 2 but it doesn't install because of windows 7. I also tried to add it in the prerequisites but again with no luck in solving the issue.
    If I try to deploy the App and install it. When I try to open the crystal report the app crushes and gives me the following error:
    Report load failed.
    exceptions:
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
       at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at DataViewer2.Form5.crystalReportViewer1_Load(Object sender, EventArgs e)
       at System.Windows.Forms.UserControl.OnLoad(EventArgs e)
       at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Edited by: starrysky88 on Sep 13, 2011 11:35 AM

  • Failed to deploy web application with same name twice

    Hello-
    On Oracle 10g Application server I deployed an WAR file called "anbadmin", then undeployed it. The undepoloyment failed from the OEM so I undeployed it manually via removing its entries from server.xml.
    When I tried to deploy it again with the same name I got this:
    Failed to deploy web application "anbadmin". Failed to deploy web application "anbadmin". . The evaluate phase failed. The Adapter used in the evaluate may have thrown an exception.
    Resolution:
    Please call Oracle support.
    Base Exception:
    java.lang.NoSuchMethodError
    null. java.lang.NoSuchMethodError
    Is there a solution for this?
    Regards

    I think I know the solution. We encountered exactly same message and no further deployment could be made. It appeared message in "dcmctl" utility was much more helpfull than the one in EM (though you still have to use "getError" command...)
    If you are using file-based repository, you have to issue command in dcmctl utility "resetFileTransaction". This closes repository and opens it again.
    Myrra

  • Deploying portal application with jdeveloper

    Hi all
    I am new to portal applications. I have followed the documentaion (http://download-west.oracle.com/docs/cd/B10464_03/portal.904/b13922/pdg_java.htm#CHDFDDBG). I am getting the following exception when I deploy the example in the doc with jdeveloer. I am using jdeveloper 10.1.2 with portal extention and ias 10.1.3.2.0 on windows.
    C:\product\Jdeveloper\jdk\jre\bin\javaw.exe -jar C:\product\Jdeveloper\j2ee\home\admin.jar ormi://machine.us.oracle.com:12401/ oc4jadmin **** -deploy -file C:\product\Jdeveloper\jdev\mywork\Scratch\portal1\deploy\portalprofile.ear -deploymentName portalprofile
    Error: Unexpected error during lookup : Lookup error: javax.naming.NoPermissionException: This operation was denied. The admin.jar utility can not be used to perform operations against OPMN managed OC4J instnaces. Please use Enterprise Manager instead. Refer to the Oracle10iAS Admin Guide or the OC4J User's Guide for more details.; nested exception is:
         javax.naming.NoPermissionException: This operation was denied. The admin.jar utility can not be used to perform operations against OPMN managed OC4J instnaces. Please use Enterprise Manager instead. Refer to the Oracle10iAS Admin Guide or the OC4J User's Guide for more details.
    Exit status of OC4J admin tool (-deploy): 1
    java.lang.NullPointerException
         at oracle.jdevimpl.deploy.Oc4jRemoteAdmin.getServerVersion(Oc4jRemoteAdmin.java:57)
         at oracle.jdevimpl.deploy.Oc4jCommandLine.deployEar(Oc4jCommandLine.java:231)
         at oracle.jdevimpl.deploy.Oc4jRemoteDeployer.deploy(Oc4jRemoteDeployer.java:64)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:53)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:53)
         at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:125)
         at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:63)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:49)
    Elapsed time for deployment: 4 seconds
    Even I tried directly deploying the ear file but I am getting 403 error when I access the application.
    Thanks

    Hi
    I just tried it again. It's not asking me to activatie the chages in ADMIN Consle I don'tknow why?
    All the internal applications of WC_CustomPortal are up and active!
    Applications - DMS Application , wsil-wls and wsm-pm
    But Jdeveloperdeploy to Server fails with error
    [11:24:15 AM] Entering Oracle Deployment Plan Editor
    [11:24:19 AM] Deploying Application...
    [11:24:20 AM] [Deployer:149191]Operation 'deploy' on application 'University_application1 [Version=V2.0]' is initializing on 'WC_CustomPortal'
    [11:24:21 AM] [Deployer:149193]Operation 'deploy' on application 'University_application1 [Version=V2.0]' has failed on 'WC_CustomPortal'
    [11:24:21 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application University_application1 [Version=V2.0] on WC_CustomPortal.: .
    [11:24:21 AM] Weblogic Server Exception: weblogic.management.DeploymentException:
    [11:24:21 AM] Caused by: java.lang.ClassNotFoundException: oracle.webcenter.lifecycle.listener.FeatureMetricApplicationListener
    [11:24:21 AM] See server logs or server console for more details.
    [11:24:21 AM] weblogic.management.DeploymentException:
    [11:24:21 AM] #### Deployment incomplete. ####
    [11:24:21 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    Regards

  • Can i deploy web application with WEB-INF as war and leave others as it is

    i'm asked to deploy my web application with WEB-INF in a war and leave all the others as it is, but i'm getting error that "resource not found"
    what shld i do?
    this is the command i used to create war
    jar cvf WEB-INF.war *.*
    i entered this command from command prompt from the directory
    c:/tomcat/webapps/myapplication/WEB-INF/>jar cvf WEB-INF.war *.*
    please help!!!!!

    can u please elaborate...because i need to speak about that to the manager who is asking me to do so. he will not listen to me until i explain with true reasons.

  • Deploy web application with exploded directory format

    I am quite new with Oracle9iAS Containers for J2EE. Currently, my project is not using EJB, only JSP and Servlets. I want to deploy the war file with exploded directory format. I don't want to use the default web application directory j2ee/home/default-web-app. The "Using Oracle9iAS Containers for J2EE" get start documentation only explained how to deploy J2ee application. What about the web application without EJB jar file? Anybody knows how to do that. Please let me know.
    Thanks in advance.

    Though you don't have ejbs, you can still use the ear file format. This would be most convenient way of deploying.
    Use of a tool like Ant is recommended if you are not using JDeveloper.
    Also, you can findinfo on deploying using a exploded directory
    http://otn.oracle.com/docs/tech/java/oc4j/htdocs/getstart.htm#1027810
    But recommed having ear file as it is convenient. If you want to see an example of use of Ant and deploying using ear file
    check out one of the recently posted how-tos E.g. http://otn.oracle.com/tech/java/oc4j/htdocs/how-to-servlet-events.html

  • Serious problems deploying web application with enterprise manager

    Hi all,
    First I have to say that this thing that has happened to me today is freaking bizarre... I was trying to make a new deployment of a web application on OAS 10.1.2, using the Enterprise Manager. The application is using Spring and DWR, therefore it has some XML files included. The application worked perfect in JDeveloper 9.0.4, our development tool, and I've previously developed very similar applications in the past, and deployed them on the same server without any problem.
    Today, when I was trying to deploy my .ear file, I got this error message:
    The file specified, "FindAnExpert.ear" is not a valid ear file.
    I tried with the .war file, and this happened:
    Base Exception:
    java.util.zip.ZipException
    invalid END header (bad central directory offset). invalid END header (bad central directory offset)
    I checked that all the included .jar files were fine, I even replaced them with new ones. I started to remove files from the .war file and discovered that without the XML files I was able to deploy the application. Then I copied over those XML files through FTP and the application is working correctly, but I was not able to use the Enterprise Manager to deploy it!!! The XML files are well formed, on of them contains the details of a data source that I also reviewed to be sure that it was correctly configured... This is nuts... any ideas over there???
    Thanks in advance,
    Luis

    Luis,
    If all of the files uploaded piecemeal worked fine, then I believe your problem to be with your deployment descriptor(s). Also, note that the .war file lives in a different directory:
    C:\oc4j\j2ee\home\applications\Application-Name
    Perhaps if you have time you could post all of the associated deployment descriptor files. Log files from the C:\oc4j\j2ee\home\log\oc4j directory would also help to troubleshoot your deployment issues. You can turn up the logging level to "FINEST" for maximum output to your log file.
    -Michael

  • Deploying J2EE application with MDB

    Hi,
    I am looking for a solution to deploy a J2EE application with MDB and the resource provider as well. For now, I only see the solution to manually create a resource provider by the EM enterprise console or to add the resource provider into the application.xml in the oc4j instance.
    Any help appreciated
    Peter

    Hi,
    This looks like an incorrect AQ JMS Jar file. Please contact the AQ team if this is a known issue and if required log a tar against AQ.
    Thanks
    Raja

  • Problem deploying an application with more task flow

    Hi all,
    I am using Jdeveloper 11.1.1.0 and weblogic 10.3.1
    I am trying to deploy an application that has more task flows.
    I am in the home page and I click on a button and I go to a new task flow.
    If I run the application from Jdeveloper it works, but if I deploy the application and try to do it I have this error on the page .jspx:
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    and this error on the server log:
    servlet failed with Exception oracle.adf.controller.security.AuthorizationException:ADFC-0619: Can't check authorization at:
    '/myFolder/calledTaskFlow.xml#myViewActivityoracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure<AuthorizationEnforcer.java:147>
    oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission
    oracle.adf.controller.internal.security.AuthorizationEnforcer.checkRead
    oracle.adf.controller.internal.security.AuthorizationEnforcer.getTaskFlowDefinition
    oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition
    What's the problem?
    Thanks
    Edited by: user10799119 on 2-set-2009 6.27

    I have not understood well what you mean: "Its better you create an EAR profile, have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev."
    I have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev. After that I have deployed my application to EAR file. I am using the EAR file create by default by Jdeveloper. Is this correct? Or have I to create another profile?
    "If you still wanna deploy the EAR, check the Users and Roles section under security in the Weblogic console. Users and Roles need to be configured in Weblogic as well. In 11g they get deployed automatically but with any previous version of Jdev you might have to check this in the WLS console."
    In the weblogic console, clicking on Security realms --> myRealm --> providers, I have defined myAuthenticator
    I am using Jdeveloper 11.1.1.0 and web logic server 10.3.1, so it seems to me that users and roles get deployed automatically
    what have I to do?
    thanks

Maybe you are looking for

  • Itunes will not launch

    Itunes will not open at all, I did uninstall and re install also did create new user account and fixed hosts file according t apple instructions, reinstalled quicktime, restored system to a week earlier when it worked, disabled firewall almost did ev

  • Two portals (same SID), one R/3 System - changing portal client number?

    We have one R/3 system but two portals.  One is EP6, the other is EP7 and is due to replace EP6.  On installation of version 7.0 we had to keep the SID the same on both portals. Now we are having trouble with SSO into R/3 as the ACL in STRUSTSSO2 wil

  • How come I can't make a in app purchase

    It keeps sayin to contact I tunes support to confirm this purchase?

  • Subtítulos en Árabe

    Hola, a ver si me podéis echar una mano con ésto: Me han encargado hacer la autoría de un DVD, con subtítulos en francés, inglés, portugués....y árabe. Todo bien menos con el árabe. En los demás idiomas no ha habido problemas, les inserto el .txt y t

  • Friends don't hear my conveprsation when talking on facetime

    Friends cannot hear my voice when I contact them with Facetime