Deploying with the admin_client.jar Utility

Does anybody have an issue with deploying app to a specific OC4J instance/Instances Within a Cluster using admin_client.jar? I'm always getting same error: "Failed at: 'Could not get Deployment Manager'". When I deploy it to a local standalone OC4J it works.
Thanks in advance

Hi all.
I am using oc4j 10.1.3 standalone and am using Ant to build and deploy my project. When we were using oc4j 9, the script that I have worked fine and the project was deployed successfully. However, after we upgraded to 10.1.3, the script broke.
I tracked down the issue to oc4j 9 using "http-web-site" as the web-site name versus 10.1.3 using "default-web-site". So, I changed that and everything built and deployed ok. However, after the application deployed, I could not login. It was like some thing was not getting binded properly. Here is the deployment command I was using:
java -jar C:\oracle_10_1_3/j2ee/home/admin.jar ormi://localhost:23791 oc4jadmin admin -deploy -file ../../deploy/iemp.ear -deploymentName iemp
So, having that fail, I tried to switch over to using admin-client.jar. However, everytime I try to use it, I get an error that says "[java] Failed at "Could not get DeploymentManager". Here is the deployment command I was using:
java -jar C:\oracle_10_1_3/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost/home oc4jadmin admin -redeploy -file ../../deploy/iemp.ear -deploymentName iemp -keepSettings
I ran through the posts in this thread to try to check out the port and other issues, but I cannot seem to access opmnctl.jar. In fact, I cannot find it anywhere within the Oracle dirs. When I try to run this on the command line "$ORACLE_HOME/opmn/bin/opmnctl status -port"
I get "Unable to access jarfile C:\oracle_10_1_3/opmn/bin/opmnctl".
I am out of ideas... can anybody shed some light for me?
Thanks,
--Nate

Similar Messages

  • Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?

    purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions  to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?
    My machine was patched to date 10.x.x.  I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded.  What if that doesn't work?
    Any thougths would be appreciated.
    Joe

    And you have a workstation? not a notebook. 
    Usually a driver or hardware, nothing that Disk utility will fix.
    You know of course what a Prohititory Sign is?
    prohibitory sign, kernel panic
    Forum devoted to Lion:
    Mac OS X v10.7 Lion Communities
    Tips and FAQs
    FAQ kernelpanic
    Resolving Kernel Panics
    Avoiding eliminating Kernel panics
    Lion App Compatibility Table - RoaringApps
    RoaringApps Mac OS X Lion Application Compatibility
    did you make sure your apps, drivers, and hardware support Lion?

  • Is the Macbook Pro with retina display compatible with the share disk utility?

    Hi,
    I was wondering whether, since the macbook pro with retina display has no cd rom drive, whether the MBP is compatible with the share disk utility like the mackbook air
    VKB

    there should be no reason why it wouldn't be, as that's a feature of the OS, not the hardware.

  • About to deploy with the navy, can i use my ipad2 overseas?

    i intend on getting my husband an ipad2 while he is on deployment with the navy. my question is, if he is in another country will he be able to use it for face talk so he can see his baby daughter? more than likely he will only go to england and dubai which are both big places...so i just want to know if it would even work before i paid 500$ for it.

    UNLIKE MANY OF THESE REPLIES, I can GUARANTEE you that FaceTime will work in every country, as ong as your husband has wifi (wireless internet connection)!
    The reason it didn't work before in Dubai and some other countries, is because FaceTime would need to be activated by communicating to the Carrier, and some carriers like in China or Dubai would not let you... Although since the iPod touch 4, FaceTime has been activated through an apple id account...
    Hope this helps you all understand... God bless the troops!

  • How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?

    How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?
    It was possible in the AirPort utility V5, but in the new V6 I can't find this option.

    Download and use 5.6.. the other non-toy version of Apple's Airport Utilities.
    http://support.apple.com/kb/DL1482

  • I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

    We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
    The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox.  When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date.  The
    version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
    So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
    I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
    Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

    Note that I have not tested either of these and they will not be supported by Microsoft. 
    1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
    (you'll have to re-distribute the client package after this).
    OR
    2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
    </Item>
     <Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
      <Applicability Platform="ALL" OS="ALL">
       <Skip>Embedded</Skip>
      </Applicability>
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Problem with the Export/Import Utility when importing a .portal file

    Hi there !
    I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
    <13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
    The error is shown several times, starting from the number [2203] until [2285].
    It causes that i can't see some pages of my portal... it's like they dont exist.
    I Hope you can help me fix it, because i have not found any information about it.
    Best regards
    P.D.: I am using the BEA Weblogic 10.0.1 version.
    Edited by: user12231353 on 16-nov-2009 12:38

    I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
    Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
    Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
    The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from  scratch to the best of my ability. Here is a complete rundown of my settings:
    I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

  • External Jar files packaged with the Application Jar.

    Hello Friends,
    I have a Java class 'Config.java' with a package a.b.c
    This class requires a third party Jar 'new.jar'. I place this Jar file in the parent directory of the package.
    So I can compile the Config.java with classpath as '.'
    This works fine.
    Now while packaging them, I create a mymanifest.mf file with following contents
    Main-Class: a.b.c.Config
    Class-Path: . new.jar
    and issue the command
    jar -cvmf mymanifest.mf myjar.jar *
    This creates a jar file with appropriate manifest information and heirarchy (since the included third party jar is in the same directory)
    When I run the Jar by issuing the command
    java -jar myjar.jar
    It gives me an error, NoClassDefFound for a class inside the included third party jar.
    I have gone through some of the other queries posted in this forum and through Sun's articles for creating Jar files.
    I have taken care of all the minute things involved in writing the manifest file, etc.
    I dont understand why such a simple application gives me a problem.
    Am I still missing something ?
    Regards,
    Ravi

    I had the same problem. But I solve it.. The thing that you have to do is:
    create another directory in your project application directory let's say your project directory is Project. such as Project / lib.
    then put external jars in lib directory.
    The last thing you have to do :
    change your manifest file like that
    Main-Class : mainclass
    Class-Path : lib/externaljar1.jar lib/externaljar2.jar
    I don't know you ever deal with manifest files before but there can be very stupid errors while you create .
    i.e there should be a space between ":" and mainclass name you shoul use "/" not "\" etc.
    I think it will work for you.

  • Getting problem with the new java.util.concurrent package

    i m using the new concurrency package of jdk 1.5 in my code. see the line:
    Executor threadPool = Executors.newCachedThreadPool();
    about this, api doc says Creates a thread pool that creates new threads as needed, but will reuse previously constructed threads when they are available
    but i dont find this method to create new threads whenever required. please tell me about this.
    in my code, in some rare cases many threads r created, and very difficult to detect the number of active threads.
    as the previous one failed i tried with another one newFixedThreadPool(int). but here i got another problem. it works successfully but i dont understand what should be the size of the pool. i tried with 1000, it works well, but in a very rare case, it failed also. then i tried with 10000. but i m still confused, i dont know whether it would work always or not. with traditional threads my code never fails.
    please tell me, what should be the size of the pool and also let me know what is the problem with the first one (newCachedThreadPool)

    The thread pool should not be more than 100 threads. Ideally you should only have a small number of threads per CPU. If your threads are not long running it is possible that you could add 10,000 runnables but on start a small number of threads. Note, adding a thread take a non trivial amount of time so while the thread is added, all the others could finish. This could mean the number of threads could be 140 or smaller.
    Have you looked at the code to see what it does?

  • Facing a stubborn problem with the security note utility.

    My system will not allow some users due to authorization issue.
    I have looked at the access over and over again without avail.
    Any additional tips would be appreciated from admins who have had issues with rsecnote utility.
    Points will be awarded for helpful suggestions.
    Cheers
    Roger

    Jared,
    The solution was simple really. Object security-check was set incorrectly as "security_check"
    The appropriate authorization is duly noted in 888889.
    Cheers
    Roger

  • Can I update my airport express station so I can connect to it with the newest airport utility?

    the airport express worked with my old computer which had snow leopard. I just recently upgraded and got a new MacBook with mavericks and it won't let me connect to the airport. Any solutions to this problem without buying a new airport?

    Unfortunately, updating the older Express that you have would require that you literally change all of the hardware on the device. Even if the parts were available....Apple does not offer them......it would likely cost more to "update" your old Express than buy a new Express.
    You can use....or borrow for a few minutes....another Mac running Leopard or Snow Leopard, or a PC with AirPort Utility installed on the device to administer the older AirPort.

  • Error on Synchronizing Users With the Provision Users Utility

    Im using ProvisionUsers.sh to realize the provision users from linux console....
    The process is retreiving an error.... the error says Error retreiving user by identity Embedded HBR initialized , I dont know what does this error means....
    Anybody??

    That is not an error it is just a warning message, it occurs most of the time.
    You probably need to check the other logs that are generated after running the utility.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Deployment with the same apple ID.

    If we have 100 iPads can we put apps to them with one apple ID? For example, using the apple ID "[email protected]" can we purchase 100 licenses of angry birds through VPP and use those codes on every iPad with that same apple ID? Thank you!

    Yes, you can.  And you can use Apple Configurator to manage the licenses if you'd like to make it a little easier.
    Are you currently using Configurator to supervise your iPads?

  • I cannot get anything to work with the iPhone Configuration Utility

    I have to set up 30 ipad 2's with restrictions set on them for the students...i created the configuration profile and click install and nothing happens...i have been to the extensive (two article) help tutorial...i have done everything it says to do...i cannot email the config to them because we don't want them using email...so not wanting to set up 30 ipads with an email addy...was wondering if there was another program with better tech support articles and is easy to set up and use...this is kinda useless...

    Jaheedi, it sounds like you've tried a lot to make this work....my experience has been that in mlost cases if a profile fails to install it is usually due to a required payload not having been configured.  It can happen if a payload category gets opened(General for example) inadvertently and then payloads within that category are not completed.(Identifier for example), then the profile will fail to install.  Also, I've only got it to reliably work over a USB connection ( we use encrypted profiles with a "with authentication" removal option).....you might try installing a very basic profile with just the General Payload category expanded ( and required payloads completed) and see if that works..if that works, it  probably is one of the other categories is incomplete.  If you haven't tried the above, I hope this helps a bit. 

  • Web Service deployed with admin_client is not working

    Hi,
    I'm usung SOA Suite 10.1.3.1 and Eclipse WTP 3.2.2.
    The thing is that I developed a Web Service with Eclipse using the plugin for generating web services. Then I exported my project to a .war file from eclipse as well.
    For deploy my web service in oc4j, I tried from the oc4j console in Applications --> Deploy and Next-Next wizard and using the .war file generated by Eclipse. I got the application deployed and I can check that the wsdl is working in http://localhost:8888/Hello_Web2/services/Hello?wsdl
    But the main problem is when I try to deploy using the admin_client command tool running the command: java -jar admin_client.jar deployer:oc4j:opmn://localhost/home oc4jadmin welcome1 -deploy -file d:\TEMP\Hello_Web.war -deploymentName Web5 -contextRoot "/". Everything seems right, I can see the application created in the console, but when I try to access to the web service using "http://localhost:8888/Hello_Web2/services/Hello?wsdl" I get and Http 404.
    What is wrong with the command method?
    Many thanks in Advance,
    Alberto

    Hi,
    As the custom web part works well in other browsers, the issue may be related to the IE itself.
    Have you tried the methods below?
    Use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    Add the site into Trusted sites to check whether it works.
    Open the IE->Internet Options->Security->Trusted Sites->add the site into the zone
    What’s more, you can also switch the Document mode to IE 10 or lower to check whether it works.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for