Deployment of DCs using  JDI

Hi all,
Actually we had a product error in Personal Information of ESS,
( SAP note: 1027039) where, SAP suggested that modification can be made manually. So the told modification were done in Message Pool, i.e adding of the BizcardFields Messages.
Just following the SAP Notes, I did the so told modifications, build the project and when i try to deploy it ..
i am unable to track the status of deployment , and the changes are not getting reflected in the Portal also.
Am I missing any step here.Please let me know if I am doing something wrong.
Appreciate your valuable inputs..
Regards,
NR

Hi NR,
I'm assuming you have NWDI fully configured for track developments and changes? If so, you should use CMS to deploy this to the relevent server. Also, when doing NWDI developments, a safer practice is to deploy on a local engine before checking out your code to make sure everything is working fine.
Regards,
Raj

Similar Messages

  • Unable to import DCs using JDI.Developer (SP13)

    I am running SP13.  Per the documentation I assigned the appropriate objects to JDI.Developer.  When I rey to import DCs I gat an HTTP 403 error message.  To get areound it I have had to assign the JDI.Administrator.  Anyone what is absolutely need for the JDI.Developer role to work.
    Thanks Steve Lambermont

    Hi Steve,
    For the JDI.Developer role we just require CMS.Display, CBS.Developer CMS.Export as well as the SLD roles LcrInstanceWriterNR.
    I see that you have already assigned all these roles.
    You can also do one thing that one you assign the role you can try logging in to SLD using this ID. You should be able to successfully login.
    Also you can check whether proper SLD role has been assigned to the role/group in Visual Admin. The way do it is given in NWDI Installation guide under section 2.2.
    Hope this helps.
    Regards
    Sidharth

  • Problem about deploying Enterprise DCs using CMS

    hi everyone.
    we currently are using NWDS04s sp10.
    Using CMS, we transport development DCs to Product System.
    However, Enterprise Portal DCs are not being tranmitted.
    Other WDJ DC, Dic DC, ExtLib DC, etc. are well transferred.
    Is it also possible to send Enterprise Portal DC over CMS?
    If possible, pls let us know in which case the Enterprise Portal DC can't be transmitted.

    Kindly check this link:
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm">Transport of Portal objects</a>

  • How to deploy custom development with JDI

    We use JDI to deploy webdynpro for ESS application. for that we create a track, check in ESS components in the track and set up run time systems. now we are going to do custom development, for example: create interactive forms, etc.. we would like to use the same procedure to deploy modifications, but we could not found any software components to check in for the track. we are wondering, what should we do for our customer development? how do we create track without any software components?
    Thanks
    Jane Zhou

    Hi
    U can create the prduct and component by logging to SLD
    http://hostname:port/sld
    and then clicking on software catlog...
    regards
    Krishna

  • Unknown site error while deploying web services using OC4J

    Hi,
    I have been testing the deploying webservices examples using demo.zip on OTN site.
    I have trouble in binding the web application name to stand alone OC4J.
    I am running stand alone OC4J server fine. I verified the website http://localhost:8888, which is running fine.
    If I issue the command
    java -jar admin.jar ormi://localhost:23791 admin password1 -bindwebapp demo_ejb_web_service HelloService_web http://localhost:8888/ sejb_webservices
    I get error
    oracle.oc4j.admin.internal.DeployerException: Unknown site: http://localhost:8888/
    What is the http-web-site address that needs to be given for binding web app, if I am running local standalone OC4J with no default port changes?
    Thanks,
    Mohan

    Eric,
    Thanks for the response. But, still I am not able to bind web-application to OC4J.
    Here is how my server.xml has defined the web-site tag:
    <web-site default="true" path="./http-web-site.xml" />
    My http-web-site.xml has following web-site tag:
    <web-site port="8888" display-name="OC4J 10g (10.0.2) HTTP Web Site">
    <default-web-app application="default" name="defaultWebApp"/>
    <web-app application="default" name="dms0" root="/dms0" access-log="false" />
    <web-app application="default" name="dms0" root="/dmsoc4j" access-log="false" />
    <web-app application="default" name="admin_web" root="/adminoc4j"/>
    <access-log path="../log/http-web-access.log"/>
    </web-site>
    I used the following command to bind the example web service:
    java -jar c:\XtendTools\oc4j\j2ee\home\admin.jar ormi://localhost admin password1 -bindWebApp demo_ejb_service HelloService_web default-web-site /sejb_services
    I get "oracle.oc4j.admin.internal.DeployerException: Unknown site: default-web-site" error.
    I tried to use following names as http-web-site, but nothing works.
    "http://localhost:8888"
    "dms0"
    "adminoc4j"
    I downloaded stand alone OC4J 10.1.2 from OTN and tried these samples.
    Your help will be appreciated.
    Thanks,
    Mohan

  • HT3529 I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    Read here:
    http://support.apple.com/kb/TS2755

  • Avoiding creation of DBlink during deployment of mappings using OMBPlus

    Hi
    we are facing an issue in our OWB 11g R2 (upgraded to patchset 10185523)
    We are deploying the mappings using OMBPlus like so
    OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN' ADD ACTION '$object_type_DEPLOY' SET PROPERTIES (OPERATION)VALUES ('CREATE') SET REFERENCE $object_type '$objname'
    OMBDEPLOY DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN'
    set OMBCONTINUE_ON_ERROR true
    OMBDROP DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN'
    OMBCOMMIT
    The $objname is any object(in this case a mapping) that we are deploying
    OMBPlus generates a script on OWB level to create the associated DBlink each time it deploys a mapping and we get an error
    INFORMATIONAL
    multiple rows found for select into statement
    DBlink_a Create Error ORA-02011: duplicate database link name
    But the mapping deploys fine.
    Any tips how we can avoid creation of dblinks from OMBPlus whilst deploying our mappings only?
    Any help will be appreciated
    Birdy
    Edited by: birdy on 22-Nov-2011 05:22

    I dont think that you can:
    "Deploying a mapping or a process flow includes these steps:
    •Generate the PL/SQL, SQL*Loader, or ABAP script, if necessary.
    •Register the required locations and deploy any required connectors. This ensures that the details of the physical locations and their connectors are available at runtime."
    http://www.comp.dit.ie/btierney/Oracle11gDoc/owb.111/b31278/concept_deploy.htm
    But error that you get is only informational so you dont have to worry about it.

  • I want to deploy an application using firefox but I don't want it set as default browser. I am using mozilla.cfg to lockdown firefox.

    I am deploying an application using firefox. I am using the mozilla.cfg file to lockdown firefox and I don't want firefox to be the default browser.

    Try the option to "Force Firefox to make itself the default" as shown in this article - http://kb.mozillazine.org/Default_browser
    Another possibility is your email application may be hard-coded to use IE.

  • Deploying WAR file using IAS Test Drive edition...

    Hi:
    Is it okay to deploy a build using a WAR file instead of an EAR file? Is
    there any documentation for deploying WAR files? All the available docs and
    examples start with EAR files.
    Thanks,
    George

    Hi,
    A war file is okay if you are using servlets & JSP, WAR means Web Archive.
    So you can very well go ahead with a war file, incase you are thinking of EJB's
    then a .ear file will help you.
    Regards
    Raj
    George Sang wrote:
    Hi:
    Is it okay to deploy a build using a WAR file instead of an EAR file? Is
    there any documentation for deploying WAR files? All the available docs and
    examples start with EAR files.
    Thanks,
    George

  • Deployed Android project using Flash Builder Burrito not working on mobiles

    Hi,
    I have created a simple "Hello World" Application using Flash Builder Burrito SDK. I have tested the result in the emulator it is working great.
    After that i deployed the application using "Export Release Build Option" and entered valid certificate details and created the .apk file. I copied the .apk file into the device and i run the application. Iam unable to run the app. I have tried these in 3 android supported devices and in each of these i am getting different error messages. I have mentioned the device in which i have tested and the error message i got while i tried to install the app (.apk file)
    HTC Desire - "Error while parsing the package of the application"
    Samsung Galaxy Tab - "Error while parsing the package of the application"
    LG Optimus one (LG P500) - "Application not installed"
    I have created a New Mobile Project in the flash SDK and added simple label "HELLO WORLD" in the view section.
    Before deploying i have installed Adobe AIR 2.5 in the device.
    Whether iam missing any of the steps to deploy correctly in the device. If so, please let me know. Also i need to know whether any restrictions are there for applications developed using Flash Burrito Preview Release. (whether by default all android mobile version more than 2.1 will support it?)
    Also when i try to install "Tour De Mobile Flex" apk in LG Optimus, it is saying "Device not supported" message.
    How do i overcome these problems to run the apk file without any problems.
    If you need any other detail please let me know, i will explain it in detail.
    Thanks in Advance,
    Srinivasan.C

    Ok, this is an old post but i still needed a couple of hours to find a solution, so here we go:
    - Most likely you have TWO executable build targets in your project (two mxml that you can launch). If so, go to the Project settings > Flex Applications and remove the one you don't need so you only have one.
    - My case was a bit complex though - i was using an ANE and Coldfucion server. In this case change the Output folder in the Project Properties > Flex Server > Output folder to something like "temp" instead of "C:..." generated by Flex Builder. The Android device gets confused by a "C:" reference but still can understand a local "temp" folder
    I hope i have saved your day

  • How to use JDI handle event, need you help!~

    Hi,
    In our recent project, I need listen some event such as ClassPrepareEvent, MethodEntryEvent using JDI and handle it. I am trying to mend the TTY and let it
    do something simple when MethodEntryEvent occur.
    I just add a print line in the method methodEntryEvent in TTY.java. But I noticed that this method is not invocated after I input "run" commond. I don't konw why? And how can I listen this event? And when the methodEntryEvent method in TTY will be invocated?
    Anyone can help me ???
    Thank you!!!
    PS: methodEntryEvent method is post as follow:
    public void methodEntryEvent(MethodEntryEvent me) {
    Thread.yield(); // fetch output
    //notice:
    //i want print this sentens when every method entry.
    System.out.println("Method Entry:");
    StringBuffer buffer = new StringBuffer("\nMethod Entered: ");
    buffer.append(me.method().declaringType().name());
    buffer.append(".");
    buffer.append(me.method().name());
    buffer.append(" ");
    out.print(buffer.toString());
    otherEvent(me);
    Duan
    SJTU

    You must enable a MethodEntryRequest before any MethodEntryEvent will
    be reported.
    In the jdb/TTY reference debugger, use the 'trace methods [thread]'
    and 'untrace methods [thread]' commands to turn tracing on or off
    for method entry and exit.
    Once you request MethodEntry/Exit notification, then the methodEntryEvent
    handler in TTY.java will be called and you will see the println() you
    added to the code.

  • [svn:bz-trunk] 17920: Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream .

    Revision: 17920
    Revision: 17920
    Author:   [email protected]
    Date:     2010-09-29 05:56:06 -0700 (Wed, 29 Sep 2010)
    Log Message:
    Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream.
    Modified Paths:
        blazeds/trunk/apps/samples/WEB-INF/src/flex/samples/marketdata/Portfolio.java

    check the server log;
    /app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
    you can launch the console and see if it is running; http://<server>:<port>/console

  • Deploying BPEL project using ant script in 11g

    Hi,
    i am just trying to deploy a single BPEL project using ant script.
    please specify what are all the needed jar's to be needed for deploying the project using ant
    and where exactly they have to placed, i mean into which directory i need to place those jar's...
    if u have any specific blog which describes step by step procedurs for single project deployment via ant, please tell me...
    its very urgent..
    thanks in advance...

    Hi',
    The .jar file required will be of the project/composite you want to deploy to server, this jar is inside deploy folder (11G).
    This .jar file gets created when you try to deploy your composite using right click on the project in JDev.
    This .jar can be picked from any location.
    Try this its little more descriptive.
    http://shrikworld.blogspot.com/2011/03/deploying-soa-11g-application-using-ant.html
    -Yatan

  • How to remotely deploy adf application using ant script

    Please suggest some pointer on how to remotely deploy adf application using ant script.
    I have created automatic inbuild ant script using jdevloper and ojdeploy that create a war file into my adf application deploy folder.
    Now i want my war to be deploy remotely on weblogic server.
    Is there any inbuld functionality provided by jdeveloper for same.
    Can any one please share build.xml for adf application for deploying application remotely.
    I try to use wlserver but not much success.
    Thanks in advance.
    Sumit Bhasin

    [url http://download.oracle.com/docs/cd/E12839_01/web.1111/e13706/wldeploy.htm]the docs are pretty good.
    John

  • Deploy Office 2013 using Group Policy

    Below are a list of questions I have regarding setting up Office 2013 deployment automation. We are looking to deploy Office 2013 Business Click-to-Run using a group policy. We have already setup the deployment using the Office Deployment Tool and have
    the configuration file all setup. The more automation we can provide the better to give the end users to best/fastest experience with this upgrade.
    How do we automate the deployment process using a group policy?
    Is there a way to have the Office 2013 deployment auto activate using the users credentials? We will be using the same password for all the user accounts for the deployment then having them change it later once everything is up and running. Would like to
    avoid having to go around and help each user activate the software as well.
    We would like to uninstall all previous versions of Office from the workstations that we're deploying Office 2013 to?
    Thank you!

    Below are a list of questions I have regarding setting up Office 2013 deployment automation. We are looking to deploy Office 2013 Business Click-to-Run using a group policy. We have already setup the deployment using the Office Deployment Tool and
    have the configuration file all setup. The more automation we can provide the better to give the end users to best/fastest experience with this upgrade.
    How do we automate the deployment process using a group policy?
    Is there a way to have the Office 2013 deployment auto activate using the users credentials? We will be using the same password for all the user accounts for the deployment then having them change it later once everything is up and running. Would like to
    avoid having to go around and help each user activate the software as well.
    We would like to uninstall all previous versions of Office from the workstations that we're deploying Office 2013 to?
    1. Because Office (in all forms) requires setup.exe to orchestrate the installations, classic Group Policy Software Installation (which requires an MSI file) is not suitable. This has been the case since Office2007. If you are constrained to use GP, you
    will need to use GP Startup Scripts. There is guidance for this, in the Office resource kit library on TechNet.
    http://technet.microsoft.com/en-us/library/ff602181(v=office.15).aspx
    2. Retail editions of Office, typically require you to login to the Microsoft Account where the license is associated, to validate the Office license. If you are using a product key method instead, you can use the PIDKEY element in your configuration.xml
    http://technet.microsoft.com/en-US/library/jj219426(v=office.15).aspx
    3. You'll need to tackle this yourself (there is no way to do this via C2R configuration). You could include the relevant uninstall-previous-version logic within your GP Startup Script (as a step prior to installing Office C2R). You'll need to cater for
    whatever previous-versions might exist in your environment, and whatever the relevant uninstallation methods are for each previous-version.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for