Depreciation area deactivated and reactivated

Hello dear all,
Depreciations Areas 03 & 08 have been reactivated for posting to GL yesterday.
Depreciation area 03 = depr. area 01 - depr area 02
Then users run AFAB and system is calculating depr 03 = depr 02
Now the depreciation 03 is activated, but the posting is wrong.
I need to know if there is a solution to correct those posting made in depr 03 due to that bad customizing ?
Thanks
Edited by: Tarek AYACHI on Jun 3, 2010 4:42 PM

Hi,
plaes make a  AFAB repead run with the rigth customizing and the depr. will be corrected.
regards Bernhard

Similar Messages

  • Windows 8 and 8.1 keep deactivating and reactivating themselves.

    I have two windows 8 systems. One is windows 8 and the other is windows 8.1. Both are in older computers that had brand new drives installed and a fresh copy of windows installed on each. They have not been upgraded from windows 7 but they had windows
    8 installed directly on them.
    Both are experiencing the same issue which is that Windows continuously deactivates itself and then will reactivate itself. 
    Neither have had any registry editors on them. They are both domain computers connected to a 2008SBS domain controller with 20 other systems (all windows 7) that are all working fine.
    They have AVG business edition with nothing but the antivirus and remote connection components installed (same thing with all other systems). The systems are behind a cisco firewall and the windows firewalls. They are fully up to date.
    They were both installed using OEM licenses.
    Neither of them have ever had android devices connected to them (I have seen similar posts about these causing issues). I have run sfc and dism on both. On one it claims it finds nothing wrong and on the other it found stuff wrong and says it fixed
    it but both are still deactivating themselves.
    Please help me get this resolved!

    Hi Sklartech,
    Please share us more information for better analyzation:
    1. Do you receive any special error messages when you experience this issue? Please check the event viewer to see if any related logs exist.
    2. How do you use the OME license to activate these old computers?
    3. What is the activation method in the domain? Does this issue occur when we are out of the domain?
    We could run slmgr.vbs to check the license type and status and share us the result.
    http://technet.microsoft.com/zh-cn/library/dn502540.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • My computer died so I'm needing to know how I go about deactivating and reactivating my Adobe Acrobat 9 Pro?

    So I have the original disc's but I'm thinking I need something more because I was not able to deactivate the program when my computer crashed.  I reloaded Windows from scratch and lost my files.

    Hi thewmejr,
    Please see Activation & deactivation help-- If you need to deactivate Acrobat, but no longer have access to the computer that it was activated on, you'll need to Contact Customer Care for assistance.
    Best,
    Sara

  • Deactivating and reactivating? Adobe photoshop elements 12 for new computer

    I am considering buying a new computer, therefore upgrading from windows 7 to window 8.1 and thense to windows 10 when it is released.
    I have read that I need to deactivate and reactivate? my Adobe Photoshop Elements 12 once I get my new computer because I can only have one on a computer at one time.
    I am however, unsure how to do this.I am also unsure how I would go about getting my Adobe Photoshop Elements 12 onto my new computer, daft as that might sound, especially as I will be using windows 8, which I don't have as much knowledge of using as 7.
    I would be greatful for any help. Thanks.

    it doesn't matter when you deactivate and then uninstall because it's only on one computer now.
    to install on your new computer, download the installation files (if you don't have them) and activate using your serial number.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  DC | XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Deactivation and reactivation of Photoshop?

    Hello, I own Photoshop and Dreamweaver but my MacBook got a virus and I had to take it into my campus tech support where they wiped and reinstalled my OS operating system. I have my Adobe products backed up and the serial numbers with me, but I did not deactivate the programs before my computer was wiped. I need to deactivate them so that I can reactive them on my computer.

    This is not an activation error. Licensing of the application has broken. Suggest you to follow the suggestions mentioned here, Configuration error 16 | CC, CS
    In case of same issue, uninstall and re-install both the Adobe apps. You can download the apps from here, if you do not have the installer. Other downloads
    Cheers!
    ~ Arpit

  • Deactivating and reactivating photoshop

    am trying to  deactivate and then activate photoshop from a windows 7 computer to a new  windows computer but my serial number is missing four characters that are needed to do a full installation.

    Presumably you copied the serial number from the Help > About screen inside the software. That number is intentionally truncated by 4 characters.
    If you are the owner of the serial number, you can retrieve the number from your Adobe account,
    Failing that, try using Belarc on the old Windows 7 computer to retrieve the serial number.
    Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

  • Deactivation and Reactivation on new computer

    Hello,
    I want to deactivate the CS5.5 and CS6 suites on a computer, then reactivate it on a new computer I just purchased.
    I have the Creative Suites.
    Do I need to deactivate each and every program in the suite or is there an easier way?
    Thanks

    UPDATE: 
    By deactivating Premiere Pro, you deactivate the whole Suite.
    Installing and activating onto a new computer was seamless.
    Yahoo!

  • Deactivating and reactivating system font protection

    Mavericks was at it again:
    The update outdated my (very aged) version of Extensis Suitcase. I'm trying out Font Explorer X pro and can't get all my fonts to work. The support from Monotype said I should try to:
    delete your application font caches as well as your system font caches (FontExplorer X Pro menu/Tools), then deactivate the system font protection, then activate it once again, then use the options to optimize the database and to update the spotlight database. Please restart your Mac and check whether or not this has solved the problem.
    I've read online that I had to go to application/Utilitlies/Terminal (which to me looks like an almost empty window with a line of type in it.
    To turn off the system font protection I'm supposed to type
    sudo atusutil fontprotection -off
    press return and enter my password when prompted.
    I think I could get that far, if only I knew how to turn the thing back on. Should I type:
    sudo atusutil fontprotection -on
    And what could he mean by this?:
    then use the options to optimize the database and to update the spotlight database.
    Unfortunately, he hasn't gotten back to me and I really need the information tonight. My fonts aren't working properly and I need to get a project out by tomorrow.
    I'd appreciate any help you can give me. Thanks.

    Actually, I did. It mentionned cleaning font cache, emptying your font collection and starting over, and also that the problem seemed to involve system fonts. I tried cleaning my font cache with no results, same with emptying my whole font collection and re-importing it over. Also, the font I'm experiencing problem with is not a system font.
    Guess I'll just wait for a fix from Apple, and use Firefox for web developement in the meantime.

  • BO servers deactivated and cannot be reactivated

    Hello Everybody,
    I have some BO servers which are deactivated, and I cannot reactivate them.
    the list of deactivated servers :
    AdaptiveJobServer
    AdaptiveProcessingServer
    DestinationJobServer
    EventServer
    InputFileRepository
    I suspect a priority in activating the servers, but i do not know them.
    Could someone please advise?
    Thanks in advance
    Vince

    Hello
    I have found the solution : the licence key has expired
    I entered the new one and everything can be reactivated
    Vince

  • Stop depreciation and interest on one depreciation area

    We have area 01 depreciation and area 70 - which for us is a managerial (statistical) depreciation posting with interest.  When this depreciation and interest is posted the offset is to a contra account so when looking at the FI side it nets to zero.  The asset is owned by the leasing company and we indicate on the time dependant tab which operating company is getting the statistical depreciation and interest.
    Our issue is the they 'transfer' these assets to another operating company with a fair market value.  The asset itself does not leave the leasing company and true FI depreciation is not touched.  Since we need to show a new value for the asset for the statistical depreciation and it gets a new depreciation schedule we found creating a sub asset and doing ABSO to 'write up' area 70 with the FMV of the transfer amount allows us to start the statistical depreciation to the transfered operating company with no issues.  The issue is stopping the area 70 depreciation and interest on the main asset - to the first operating company. 
    I tried putting a scrap value equal to the remaining book value on the main asset in depreciation area 70 and that did stop the depreciation - but it's still trying to post interest for the next period and beyond. 
    Ideas?  Options you guys can think of?
    Thanks
    Karla

    Hi,
    a) Copy the retirement transaction to a new one and restrict it to post only in area 70. You can then completly dispose the asset in that area.
    b) Use/create a depreciation key in that area that has Shutdown = Yes. In the time dependant tab you can then set the asset to shutdown and it will stop depreciating.
    Kind regards

  • Hide Depreciation Area

    Hello,
    The user requests that one of the depreciation area (Area 02: Tax depreciation on balance sheet values) will be masked.
    There are changes that were made on that depreciation area 02 and he doesn't want them to be displayed.
    When he open Transaction AW01N - Asset Explorer, he don't want that informations about Dep. Area 02 appears.
    Thanks
    Tarek

    don't agree with Deactivation suggestion. I think you want users not to see the value in Dep Area 02 and not deactivate it. If you deactivate then system would not calculate any value.
    My suggestion is ask your Basis Person to check in AW01N TCode if he has option for Data Element AFABE (Depreciation Area). If so then you can add Dep Area which you want users to see in this field and Basis then can create a role using this Data Element and assign to respective users.
    Thanks,
    Sanjay

  • No depreciation areas have been defined for asset 10001-2

    Hi,
    While creating Goods Receipt(MIGO) the following error is showing
    "No depreciation areas have been defined for asset 10001-2"
    Could u plz, suggest me what i have to do.
    Thanks in Advance,
    Sudheer.

    Hi
    Goto Asset Master TCode AS02 / Depreciation area tab and check depreciation areas have been defined for asset 10001-2" or not.
    Cheers
    Srinvias

  • Creation of depreciation area for posting of parallel currencies postings

    while i am posting f-90 asset e. auqsiation its giving error massage
    "Customizing inconsistency (contact your system administrator)
    Message no. AC496
    Diagnosis
    Company code BP01 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 60 and currency INR. There is no depreciation area of this type defined for depreciation area 01.
    Procedure
    Check your Customizing settings."

    Hi Venkat,
    Create a New Depreciation area with APC Values and Depn values identical to Value 01.
    Then goto valuation> currencies
    Specify the Use of Parallel Currencies> and assign the currency type and valuation view to the new depn area. tick the identical values
    then goto
    Define Depreciation Areas for Foreign Currencies> give the parallel currency against the depn area
    Now try doing the transaction.
    Please revert back if you still have any issues.
    Thanks,
    Vamsi

  • FI-AA new depreciation area - treatment depreciation previous years

    Hi,
    In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
    Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
    The depreciation calculation and resulting postings for the current year are correct.
    However I wonder what will happen with the data for the previous years;
    when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
    Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
    Many thanks in advance for your much appreciated help.
    Kind Regards,
    Arjan

    Can you please tell me how you added the new depreciaton area to the existing asset masters in those classes ?  To get the new depreciation area to show up?  We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes.  If you figured out how to do that it would sure help us out.  I look forward to your response.  We're in 4.7.
    Thanks
    Karla
    Never mind found it from reading other posts.  I used AFBN and it worked.  Thanks
    Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM

  • Parallel Currency Depreciation Areas.

    Hi,
    I have activated parallel currencies (Hard Currency - EUR & Indexed Based - USD) concept to my company code.  I am trying to settle WBS, that time I am getting error message "Company code XXXX manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 40 and currency EUR. There is no depreciation area of this type defined for depreciation area 01"
    For the above error how to create dependent depreciation area and attaching to currency type EUR". 
    Help is needed very urgent.
    Thanks in advance for the same.
    Regards.

    Hi,
    Normally when you activated parallel currencies, then you should have minimum 2 depreciation area. First is Book Depreciation , and the second is "Group Currency"  Depreciation.
    You can define depreciation Area for "Group Currency" in :
    SPRO -> Asset Accounting -> Valuation -> Define Depreciation Area
    Then you should Specify Area Type in t-code : OADC. Set "Typ"= 6 (group Valuation) for the "Group Currency" depreciation area.
    Then Specify Transfer of APC Values in t-code : OABC , fill "ValAd"= 01 and tick column "Identical" for "Group Currency" Area.
    Do the same thing in t-code : OABD.
    Then You should define currency for those depreciation area in t-code : OAYH.
    Last, you should Specify the  use of parallel currencies in :
    SPRO=> Asset Accounting -> Valuation -> Currency ->Specify the  use of parallel currencies .
    For "Group Currency" Depreciation area , Fill following :
    "Currency Type" = 30 Group Currency
    Tick "IdAPC"
    "Ttr" = 1 book depreciation
    Tick "Indnt Trn"
    Hope It can help.

Maybe you are looking for