Depreciation on assets with asset shutdown

To stop depreciation on assets with the 'asset shutdown' our test asset still shows planned posting of .01 one month and -.01 the next. Is this due to configuration of the depreciation key? Or, is there a program to make 'planned' equals 'posted' to zero out these pennies. Deprecation should no longer post once the asset is shutdown.
Thanks,
Mark Ashabraner

Dear Mark,
We have this same problem, after configured 'shutdown' indicator in depr key and asset master (we are using multiple depr area, with different depr key in the depr area), we found that the asset still depreciate for +1/-1 for some of the period (after the shutdown period), and it only happens to certain depr key in the same asset. It looks like the +1/-1 posting is caused by some rounding difference in the depreciation calculation (maybe straight line with remaining value), but the concept for shutdown should be no depreciation at all during shutdown period. Just wondering if you already found solution and would like to share, as we are really desperate. Thanks.

Similar Messages

  • India Tax Depreciation (group asset)

    Hi FICO experts,
        I'm having some problem with depreciation calculation for group assets to adhere to India IT Tax Depreciation  regulation. As per IT law,
      1. asset acquired <180days shall be depreciated at 1/2 of the depreciation rate for the fiscal year
      2. asset acquired >180days shall be depreciated at full rate for the fiscal year
        I've created depreciation key with period control NL and IT, and configure 2 depreciaiton area i.e 01 for book and 02 for tax depreciation in India COD. 02-Tax depreciation is configured as managed at Group asset.
        I created 2 Assets i.e Asset A and Asset B and both linked to Group Asset C. Say the depreciation rate is 15%
    1. Asset A - Acquired on P1 of 2008 --> INR10000
    2. Asset B - Acquired on P9 of 2008 --> INR10000
       A & B are linked to Group Asset C in 02-Tax depreciation area.
         When I view Group Asset depreciation, I noticed that the deprecition for 2008 computed as (1000015%)+(1000015%). Thus, although Asset B is still being depreciated at full rate of 15% instead of half of the rate.
        Besides, is that normal that I'm not able to see depreciation at Asset A and Asset B in tax depreciation area 02 when they are managed at Group. I can only view the deprecation at Group asset C?
        Appreciate help if anyone have similar experience. Thank you in advance.
    rgds
    WJ

    Hi,
    If you want to adhere Indian IT laws then follow the below mentioned steps:
    1. Maintain a relationship of 1:1 of AS01 & AS21, means when you create a new normal asset it should be tagged with a new group asset.
    2. Try to use SAP standard delivered dep. keys.
    3. Change asset value date determination in SPRO.
    4. Tagged group asset into the normal asset master.
    5. Check tax dep.figures under group asset.
    Regards
    Anuj Agarwal

  • Error in depreciation run - assets under construction

    Hi!
    Could someone please help me with the following:
    My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
    1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
    2) Executed depreciation in background.
    3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
    4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
    5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
    6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
    Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
    Please help!
    I am very thankful for any help!
    Many many thanks in advance!

    Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
    with regards,
    Prabhakar

  • Depreciation on Asset for current period..?

    Hi Experts,
      i have a question regarding depreciation on asset. My fiscal year is apr-mar. Suppose i purchased asset(Ex:machinery) this month(december). So from When can i run depreciation on that particular asset.?
    Thanks in Advance,
    Regards,
    Rajesh.

    You have really asked two questions, and I don't know that the answer for both is the same throughout this world.
    1  When must statutory depreciation start for taxation purposes, such as for the IRS regulations if in the US?  This is probably NOT depreciation area 01 in SAP, but a derived area maybe.
    2  When must financial accounting depreciation start, such as for US GAAP or for IFRS rules.  This usually involves depreciation area 01 in SAP, plus other DA's for revaluations and/or for subsidiary company financial reporting in other currencies.
         Probably both are when the assets are placed into service, or some other consistent project milestone that approximates in-service dates.  But check with your accountants/auditors for DA01, and check with your statutory tax personnel for non-financial areas.
    Regards

  • AA - Asset shutdown

    Hi everyone,
    I have an asset shutdown on september but after this time some months there were depreciation posted ( 0,01 ).
    Does anybody know how to solve this issue?!
    Thanks
    Dan

    For asset shutdown to work you need two things:
       The depreciation key needs to allow for asset shutdown -- check the configuration of the depreciation key.
       On the asset master record of the particular record, asset shutdown has to be flagged.
    If both of these things are not done, SAP will continue to post depreciation to the asset.

  • Post depreciation by asset

    Hi Guys.
    Is there a way of posting depreciation by asset in a specific depreciation area?
    I mean, we wanna have acc. deprec account x expense deprec account for each asset in AFAB process.
    Even having many, many, many, bseg lines.
    Here in Brazil we have an area to control CIAP and my customer wants clear monthly postings with that one posted on acquisition.
    Best regards.

    Hi,
    SAP standard does not allow you to do so, you are not allowed to
    select assets for individual dep postings  when you are
    doing "planned posting
    run" in AFAB. Individual assets can only be selected for posting in repeat run. Here
    system will allow
    you to post a repeat run only
    for the periods for which
    planned posting run has
    already been done.
    Regards

  • Any Table/Tcode to know which user did asset shutdown & on which date

    Hi All
    Is there any Table/Tcode to know which user did asset shutdown & on which date?
    Regards
    Pankaj

    Hi Preeti
    I guess ANLZ is not sufficient. The best method is AR15 or S_ALR_87012037 or RAAEND01.
    Regards
    Pankaj

  • Reverse depreciation for asset wise

    Dear SAP gurus,
    Is it possiablity to do reverse depreciation for assets wise.Please suggest me.
    Thanks in advance,
    Sai

    Hi,
    In standard it is not possible.
    You have workaround for this.
    1.Change the depreciation key assigned in asset master
    2.Copy transaction type 640 and choose debit transaction radio button. Next go to ABAA and give the new transaction type and amount(depreciation amount) to reverse.
    You can choose any one option from the above.
    Regards,
    Sankar

  • [ZM] Problem with idle shutdown.(or idle tim

    My zen micro's current firmware is ..0
    I found this problem months ago, but didn't try to figure it out.
    There is centainly problem with idle shutdown timer.
    I guess the IDLE SHUTDOWN TIMER SHOULD NOT RUN IF THE PLAYER IS PLAYING.
    Idle = player is on, but not playing or not performing any task.
    My current setting is
    Idle timer = 5 min
    Sleep timer = 45 min
    This problem occurs,
    When the player is turning on from deep sleep mode (after 4 hrs of stand-by mode)
    I left my player playing mp3 after turning on.
    And eventually the player shuts down itself after about 5 min (which is setted as idle timer)
    So I checked the screen when the player shut down itself, and the screen was displaying 'Idle Shutdown'
    Once the player shut down, it will not shut down again after turing on.
    Summary,
    . Turn on player after deep sleep mode(4hr)
    2. leave player as playing music
    3. after time amount of idle timer, it shuts down itself.
    4. the screen displays 'idle shutdown' when it shuts down itself.
    anyone noticing this problem?

    Jason-CL wrote:mcramen,I tested by taking the battery out(this will simulate as a deep sleep), and also turning on and off the player a few times without taking the batttery out with the same setting. The player are still playing now.Jason
    Jason, there is a critical difference your test missed: He turned his player off, let it go into "deep sleep" after 4 hours, then turned it back on and left it playing; it then went into "idle shutdown" after 5 minutes. This can only happen with 4-hour-standby firmwares (..02, 2.20.05, and the deprecated .0.02) turned off while playing, which then go into "deep sleep" after 4 hours; if you "simulate" it by resetting, it won't start playing when you turn it back on. And if you press any button, "idle shutdown" will work normally and the bug won't occur. (Older firmwares will lose your place when entering "deep sleep" after 24 hours, so they won't exhibit the problem.)
    Sounds like a firmware bug where it fails to recognize that a player turned on from "deep sleep" doesn't need a button punched to be playing. Get ready for .2 and possibly 2.2 firmwares, maybe?
    In the meantime, the workaround would be to press any button (menu, pause/unpause, anything) if it's playing when turning on from "deep sleep". (Much like the previous post, but I suspect any button other than the power switch will work, not just pause. But I could be wrong.)Message Edited by RBBrittain on 0-9-2005 02:4 PM

  • My ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz

    my ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz

    Did you already try to connect in recovery mode iPhone and iPod touch: Unable to restore or DFU mode Apple - Support - Discussions - DFU/Recovery mode

  • Idle assets (asset shutdown) different treatment in dep areas.

    Hi
    We have a situation where if the asset remains idle (shutdown flag in asset master contains a from and to date), then
    a) in area 01 depreciation should be stopped
    b) BUT in area 20 depreciation should continue.
    What is the best way to do this? I am aware that there is a shutdown flag in depreciation key too.
    Please advise.
    Best wishes
    Raj.

    Hi Markus
    Thanks a lot for your response and it makes a lot of sense. I was very apprehensive about using 0000 as you rightly said it would wipe out depreciation.
    Another question is if I create a new depreciation key with shutdown unticked in it and assign it to a depreciation area I see that it recalculates depreciation for the time the asset remained idle in the "Current" year which is good.
    Would you know if on the application of the new depreciation key (where shutdown is unticked)  will it also recalculate depreciation for the periods it remained idle in "closed" fiscal years?
    Best wishes
    Raj.

  • Posting Unplanned Depreciation when asset net book value is zero

    We recently transferred some assets from one company code to another.  However, when they transferred, the depreciation all reversed out YTD.
    We are now trying to post the YTD depreciation back in under the original company code, but when we try posting unplanned depreciation, the following error message appears -
    "In area 01, you can only post manual dep. up to the amount 0.00"
    I believe this is because the asset does not have any net book value now.
    Any suggestions on how to resolve this?
    Many thanks,

    Hi Susan,
    do you have the option to reverse the transfer postings? If so, you could specify another period control for transfer postings (such as fiscal year start, etc.) in your depreciation key, with which you can influence how much depreciation is left back respectively transferred.
    It is correct that you can´t post an unplanned depreciation on the sending asset now, because the net book value would go below zero. As unplanned depreciation does not influence the ordinary depreciation in the year of posting, this value below zero can not be adjusted with a reduction of planned ordinary depreciation.
    I am wondering which effect you´d like to have on the sending asset. Did you post a complete retirement? If so, there should be no APC left which you can depreciate on the sending asset. And as the net book value is zero already, which effect do you want to get? You have to keep in mind that the non-depreciated APC will be continued to depreciate (normally) on the receiving asset. But maybe I misunderstood the problem here ...
    Regards,
    Markus

  • Depreciation reposting, Asset master deletion Reg

    Hi
    I have come across a problem.Duplicate asset masters are uploaded in to the system and later on depreciation posting run is carried out for these assets.
    Now we want to delete these assets masters.
    As of my knowledge we need to change the Depreciation key and rerun the depreciation posting for the same periods.
    But i am not able to change the depreciation key .System message is the perticular dep.key can not be changed.
    Can any one help me with the detail process to be followed?
    thanking you
    Ramesh Babu

    Hi I have successfully deleted the Duplicate Assets with the procedure stated in my earlier mail.
    Now the users question is to corrrect the depreciation posted to duplicate assets.
    I say that i have repeated the depn run with Depn key 0 for all the Duplicate assets and hence the depreciation earlier posted is rectified. No furthur adjusting entry is required.
    Please correct me if i am wrong.
    Regds
    Ramesh

  • Depreciation run: Assets posted, FI not posted

    Dear All,
      User created an AUC with reference to an existing asset, thereby deriving depn key of that asset.
    Depr run gave error for acc. depn account determination for that AUC.
    Values of that AUC trf to other AUC with depn key 0000.
    Depn deactivated and thereafter original AUC deleted.
    First depn run has posted values in AA module without any reference document.
    We have analysed and found that Table ANLP has data of this original AUC.
    How can one by-pass this data which is being picked in the depn run?

    Dear Dattatray,
    Basically AUC should not be charged with depreciation. For that matter you should not even maintain depreciation accounts against AUC asset class.
    Also, asset gets picked up in depreciation run as it is getting capured thru any of the tables viz. ANLB, ANLC< ANLZ, ANLP, ANLQ etc.
    Still as I understand you should not charge depreciation to AUC.
    Regards,
    Ajay Gupte

  • Running depreciation for assets uploaded by ADI

    Hi All,
    I uploaded some assets into applications using ADI (Application Desktop Integrator). I did not enter any YTD or Accumulated Depreciation values while doing that with the hope that the applications will calculate it when I first run the depreciation for the current open period.
    For some of the assets, Date in Service field has a date from 2-3 years ago. Does anybody know if applications calculate depreciation for those old assets when running it for say January 2007 or I have to manually calculate and enter it into the system.
    Thanks,

    Hi Bernhard
    The understanding of getting -1100 as NBV is correct
    But when we check the AR001/AR002 as an enhancement spot, our requirement cannot be done
    We tried the other option of taking an customer exit during AFAB and tried to append the value of depreciation. At that point we cannot append the current period depreication from postive to negative
    From our analysis we found that it may not be the right place, since we have the value of depreciation in postive in AA table (which can be checked in AW01N)
    The other option of this is while posting transaction for example F-90, the system will post FI transaction and it will update the AA tables as well
    But AA updation happens at backgroud. Do you have any idea or hint which program will update the AA when F-90 is done
    If you check the value in AW01N, this will be calculated the planned depreciation movement the F-90 transaction is posted
    Thanks
    Bala

Maybe you are looking for