[ZM] Problem with idle shutdown.(or idle tim

My zen micro's current firmware is ..0
I found this problem months ago, but didn't try to figure it out.
There is centainly problem with idle shutdown timer.
I guess the IDLE SHUTDOWN TIMER SHOULD NOT RUN IF THE PLAYER IS PLAYING.
Idle = player is on, but not playing or not performing any task.
My current setting is
Idle timer = 5 min
Sleep timer = 45 min
This problem occurs,
When the player is turning on from deep sleep mode (after 4 hrs of stand-by mode)
I left my player playing mp3 after turning on.
And eventually the player shuts down itself after about 5 min (which is setted as idle timer)
So I checked the screen when the player shut down itself, and the screen was displaying 'Idle Shutdown'
Once the player shut down, it will not shut down again after turing on.
Summary,
. Turn on player after deep sleep mode(4hr)
2. leave player as playing music
3. after time amount of idle timer, it shuts down itself.
4. the screen displays 'idle shutdown' when it shuts down itself.
anyone noticing this problem?

Jason-CL wrote:mcramen,I tested by taking the battery out(this will simulate as a deep sleep), and also turning on and off the player a few times without taking the batttery out with the same setting. The player are still playing now.Jason
Jason, there is a critical difference your test missed: He turned his player off, let it go into "deep sleep" after 4 hours, then turned it back on and left it playing; it then went into "idle shutdown" after 5 minutes. This can only happen with 4-hour-standby firmwares (..02, 2.20.05, and the deprecated .0.02) turned off while playing, which then go into "deep sleep" after 4 hours; if you "simulate" it by resetting, it won't start playing when you turn it back on. And if you press any button, "idle shutdown" will work normally and the bug won't occur. (Older firmwares will lose your place when entering "deep sleep" after 24 hours, so they won't exhibit the problem.)
Sounds like a firmware bug where it fails to recognize that a player turned on from "deep sleep" doesn't need a button punched to be playing. Get ready for .2 and possibly 2.2 firmwares, maybe?
In the meantime, the workaround would be to press any button (menu, pause/unpause, anything) if it's playing when turning on from "deep sleep". (Much like the previous post, but I suspect any button other than the power switch will work, not just pause. But I could be wrong.)Message Edited by RBBrittain on 0-9-2005 02:4 PM

Similar Messages

  • Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
    iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

    I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

    Hi Guys
    Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
    Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
    I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
    So its cough up to carry on using Quark or learn Indesign.
    I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
    Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
    If anyone hears of a solution please post ASAP

  • I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

    I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

    The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
    Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
    Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

  • Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

    Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

    Gary,
    discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
    Try OnyX freeware to do some cleanup and see if that helps.
    http://www.titanium.free.fr/index.html

  • Problems with random shutdown after replacing a swollen battery

    Hello all,
    Perhaps one of you can help with this issue.
    I'm using a Macbook Pro 17" mid-2007 model. A few months ago, the power disconnected from the machine when the battery had already run down and the machine did a hard shutdown. When I booted it back up there were serious problems with the display. Eventually it stopped working altogether. I took it for service and it was determined to by the NVIDIA graphics processor problem, so Apple replaced my motherboard.
    When I got the machine back from servicing, there was a rattle in the right fan that gradually got worse. After a while the touchpad button stopped depressing in the center. I also experienced several random shutdowns while operating on battery power. I learned about the swelling battery issue with macbooks and ordered a replacement. By the time the replacement battery arrived my original battery was quite swollen. I'm concerned that the swelling battery may have warped the case a bit, leading to the fan noise.
    I have now replaced the battery, but I'm still experiencing random shutdowns after 20+ minutes of use on battery power. I have done the RSS tests that were recommended in other forums and there doesn't seem to be any random shutdown problems when I'm plugged in -- only under battery power. My understanding is that a swelling battery can sometimes cause the battery to disengage from the electrical contacts on the MB, causing a sudden shutdown. I'm wondering why the problem is persisting now with a new battery? After one random shutdown, I tried to power up again using the battery, while pushing the battery into place at various angles, but I couldn't find any angle that would give power to the machine. The fan noise is also still present.
    Can anyone offer an explanation or advise on any methods to overcome these random shutdowns? I have checked the console and the machine isn't registering any error when it shuts down, although when it restarts it says "DirectoryService[35] Improper shutdown detected"

    Yep, it is video (or: or audio for video) so unless you're sure you need it (because you work or will work with the DVC Pro HD video/audio codec), you can remove the plug from its' folder and put it in your documents folder (don't trash it, I have no idea if it is necessary for non-DVC Pro HD users to have it installed too).
    The WWW is littered with posts from people encountering bugs and crashreports with DVCPROHDAudio.plugin as the main suspect. Most of those posts seem to be from video people rather than audio folks.
    http://www.google.nl/search?q=DVCPROHDAudio.plugin&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-US:official&client=firefox-a
    But, if you get crashes and you see this one mentioned in the report, disable it, restart, and see if the problem's gone.

  • Problems with Bluetooth Status and Startup Times.

    For the past little while my MacBook Pro has had slow startup times and the Bluetooth status icon in the Finder does not appear when I first start up the machine.
    The Bluetooth status problem has only started in the last week or so. In order for me to get it to display again I have to open up System Preferences, go to Bluetooth, uncheck "Show Bluetooth status in the menu bar" and then recheck it again and it will appear. Occasionally, it will show up on startup but to the right side of the clock when it normally appears far off on the left side.
    As for startup times, this has been only recent as well. I upgraded to 2 Gb of RAM a few months back and everything was fine, now within the past few weeks it has been starting up much slower than it would.
    These may not be issues that can be solved. I am debating whether or not I want to re-install Mac OS X or tough it out until Leopard comes along.
    Any help would be greatly appreciated.
    Thank you,
    Aaron

    Initially I thouhgt this problem with playback of music had something to do with bluetooth but I'm not so sure anymore.
    The problems with music apps stop working correctly after connecting or disconnecting a bluetooth headset led me to beleive that it was a purely blutooth related problem. Now I think that this might have something to do with an incorrectly configured audio device.
    The various symptoms so far that can be replicated
    Frequent drop outs (short breaks of silence) in playback of music when using a blutooth headset, at least once per musical track
    Frequent short moments of stuttering in music playback when not using a bluetooth headset
    Drop outs/stuttering is more frequent when display is turned off
    Music player freeze if bluetooth is turned on during playback, tapping play/pause doesn't work
    Music player freeze if playback is turned off during playback, tapping play/pause doesn't work
    If you use the playback buttons on the bluetooth headset immediately after connecting the bluetooth headset during playback with the standard music player you will get a message on the x10 display giving you the option to "force a shutdown" of the player
    Ringsignals are stuttering and double speed when using a bluetooth headset
    Sounds recorded at a sample rate of 11 kHz on the x10 (for instance using an app like fourtracks) will playback at double speed

  • Problem with itunes and iphoto after time machine restoration

    After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different albums I have, but all the photos come up as grey squares. They are definitely on the computer as you can see them in the iphoto originals folder in the finder window.
    A similar problem with itunes. My itunes library is totally blank, with no songs whatsoever. However the songs are there in itunes music folder.
    How can I restore everything back to normal?
    Matt

    Look at Q15 here. http://pondini.org/TM/FAQ.html
    There are separate sections for iphoto and itunes.
    It has to be so complicated because Apple made TM to do too much and be too many things to too many people.. a horse designed by a committee. It has become flakey in later editions.
    If you still have the iMac you can move the files directly from the source.. you don't need to use TM backups at all.

  • CopyRights problem with "expires at the fixed time" uat mode

    Dear all
    I found a problem with rights parameter
    When I use rights parameter in uat mode or umt mode
    it can't be work with this two modes($uat and $umt)
    and I found a document in adobe jp
    the document says "only uat mode works well with expire function"
    so I change the rgihts to uat
    but it still has problem and does not work
    this is part of my ASP VBS code
    startTime=DateDiff ("s","1-Jan-1970",Date())
    endTime=DateDiff ("s","1-Jan-1970",DateAdd("n" , 1 , Now()))
    strQueryParams = oGBLink.AppendToQuery("bookid", pSku, strQueryParams)
    strQueryParams = oGBLink.AppendToQuery("rights", "$uat#"&endTime&"#"&startTime&"$", strQueryParams)
    strQueryParams = oGBLink.AppendToQuery("price", CStr(pPrice), strQueryParams)
    ....and more
    is there any problem with my code??

    I don't see a problem with your code. You might put in a print statement and make sure that strQueryParams contains what you're expecting.
    When you're testing, are you using the same book more than once? If so, ACS can get confused about which voucher to use and use an old one.
    - either use a different book each time
    - or after each test, reset Acrobat or Reader on your test download machine. Adobe has a KB article:
    http://support.adobe.com/devsup/devsup.nsf/docs/53857.htm

  • Problem with currency translation and variable time ref. with 0FISCPER

    Hello,
    We have a problem with a currency conversion with a variable time reference (as iobject we use 0fiscper)
    We created a currency conversion for several key fig:
    Our settings:
    Exchange rate Type: EURX
    dynamic ex rate determination
    Source cur from datarecord
    Fixed Target Curr (EUR)
    Variable time ref.: End of Period
    Special Infoobject: 0fiscper
    When we run the DTP we get the following error:
    <i>Enter rate GBP / EUR rate type EURX for 00.00.0000 in the system settings.</i>
    ending the DTP in a message type X.
    In table TCURR and T009/T009B all necessary information is available.
    After debugging the function module, it looks like the created date (created from the FISCPER) is set to 00.00.0000. This results in the error above.
    Does anybody have experience with this error and more important know how to solve it?
    We also have a 0FISCYEAR available but in the TCURR table al rates are defined per end of the month. When trying to use 0FISCYEAR as InfoObject in the variable time reference, a diffrent error occurs:  Enter rate GBP / EUR rate type EURX for 01.01.1001 in the system settings. While  the 0FISCPER is 2001001.
    Is there a bug in the function module? (couldn't find a SAP note)
    We are working with BI 7.0 and SP12
    Best regards
    Steven

    Please can you give more detail on how you were able to resolve this issue?  How did you add 0fiscper to the transformation?  I am on BW 3.5, how do I fix this same issue on it?  Please help, this is urgent.

  • Problem with 'Filling Space' described in Tim's Blog

    Dear Experts,
    I am using the Invoice Template described in the excellent Blog by Tim Dexter (Anatomy of a Template) to produce my own version. However, I am having problems with the 'Filling Space' described here: http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
    My template is almost identical to the example, when I import XML data where there is only one record, the Filling Space does not pad out with enough empty rows so that the Total table is not at the bottom of the page, aligned with the watermark that I have. The code in the 'Filling Space' field is as in the Blog:
    <?if:not(count($invLines) mod $lpp=0) and ($start+$lpp>count($invLines))?><?for-each:$invLines?><?if:position()<$lpp - (count($invLines) mod $lpp)?>
    If the number of records is greater than half a page or more, then the padding is correct. This is even if, say on the third page there is just one record. Therefore, it seems the padding does not work if the number of records are less than half a page in total.
    Is this correct and does anyone have a solution - would be greatly appreciated.
    Many thanks,
    Mark

    "If the number of records is greater than half a page or more, then the padding is correct. This is even if, say on the third page there is just one record. Therefore, it seems the padding does not work if the number of records are less than half a page in total."
    This statement is wrong.
    Leave the if conditions logic,
    This is how it works,..
    xml contains 43 rows...
    each page you need 10 rows..
    after every 10th rows [using position mod 10 ,] , you put a page break...
    if the mod returns greater than 0, that means row filler has to come into effect now.
    what is the logic now to have row fillers is , 10 - 3 [position mod 10] , comes to 7... so seven blank rows should be inserted..
    this is how , it works...
    so the statement, saying, less than half of page, or something, wont come into this :).
    http://winrichman.blogspot.com/2008/09/limit-row-per-page.html

  • Problem with License MAC after change Time Zone in UCCX 8.02

    Hi all,
    Please I need Help.
    The last weekend, we changed the Time Zone in we Cluster of UCCX 8.02.
    Now when entry to administration page, show a warning that says.
    “The Unified CCX Systems is currently using a license that has a grace period of 30 days”
    How i can solve this problem. I must go back with the change , and return time zone previous ?
    Thanks
    Guillermo

    Welcome to the wonderful world of Cisco Licensing with 8.5 (perhaps 8.0 as well). Changes to the IP address, hostname, DNS, Time Zone, and a few other fields will change your License MAC and invalidate all licenses.
    Send an email to [email protected] asking them to rehost your license for the new license mac.
    Tanner

  • Mayor Problems with new installation / restoring from time machine

    I encountered several problems while setting up my mac mini, 1,66 Ghz, 60 GB from the start. The following problems occured:
    1.) Installing 10.6 upon existing 10.6.4 caused scanner driver to fail. I was unable to reinstall it, so i decided to reinstall 10.6. from the start
    2.) clean install of 10.6., after finishing i could not install iWorks. There was an error like "com.apple.installer.pagecontroller" ant installation terminated. With MS Office 2004 I had a problem, too: An error with _ds.store occured, I could not even copy the files to my harddisk. I thought, it might be the optical drive, so i took an external one which caused the same problems. I proceeded to 10.6.4 by update, but that did not make it better.
    3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
    4.) tried to repair rights hat no effect. The harddisk is reportet to be functional.
    5.) Back to the roots, i thought, installing 10.4. which came on the grey disks with the mini. I encountered the same problems after installing, furthermore, on trying to install flash 10.1 it could not open the .dmg-file.
    6.) Installed Win XP. All seems funktional.
    So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.

    MathiasLeopold wrote:
    3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
    Did you use a Leopard Install disc to restore a Snow Leopard backup? If so, that's the problem. You must use a Snow Leopard Install disc to restore a Snow Leopard backup.
    If you did use the right disc, were you restoring backups from the same Mac?
    If so, were you having problems before all this started? If you were, it's possible those problems corrupted your installation of OSX, and that was copied to the backups.
    So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.
    Try running this: Intel-based Macs: Using Apple Hardware Test

  • HT201209 i have problem with my billing information, every time when i want buy app from app store, he told me go to purchase history , i don't know how i fix this problem, so please help me

    Dear
       I Have a problem with purchases , where , when i wanna buy a game from app store (Using VISA), he told me : your billing information was decline,
    So Please i need your support to solve the problem quickly
    Thanks
    Ali Altalabany

    Try rebooting the iPad one more time. Try using recovery mode again and if that still doesn't work, make an appointment at an Apple Store and ask for their help.
    iOS: Unable to update or restore - Apple - Support

  • Is there a problem with the itunes and quick time download pages or is it my internet.

    Is there a problem with the itunes and quicktime download pages or is it just my internet.

    Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
    So it might be worth installing Firefox and seeing if you can get the downloads via that:
    http://www.mozilla.com/en-US/firefox/new/

  • Problems with the System.Windows.Forms.Timer

    Hi All,
    Could some one help me please? I'm having a problem using the System.Windows.Forms.Timer inside an ItemEvent, the timer event just doesn't works...give a look in my code:
    private System.Windows.Forms.Timer myTimer = new System.Windows.Forms.Timer();
    if (pVal.FormUID.Equals("FrmTimer") && pVal.ItemUID.Equals("btnStartTimer") && (pVal.Before_Action.Equals(true)) && (pVal.EventType.Equals(SAPbouiCOM.BoEventTypes.et_CLICK)))
                myTimer .Interval = 1000;
                myTimer .Enabled = true;
                myTimer .Tick += new EventHandler(myTimer _Tick);
    void myTimer _Tick(object sender, EventArgs e)
                SBO_Application.MessageBox("Timer: " + DateTime.Now, 1, "OK", "", "");
    does someone have already tried to use the timer inside an itemevent, or could suggest another solution?
    thanks a lot...

    Hi Bruno,
    Unfortunately you cannot use a Forms.Timer without using a windows form (ie not a SBO form). Have you looked at the other 2 timer objects in .Net, the System.Timer.Timer and System.Threading.Timer? Here's a link to a web page that goes through the differences between each one:
    http://msdn.microsoft.com/msdnmag/issues/04/02/TimersinNET/
    Kind Regards,
    Owen

Maybe you are looking for

  • Dunning Status Report

    Report should be pulling information from dispute management.  Report should pull all active dispute cases by company code (Company Code and Name should be at the top of the report).  Report should show dispute case ID, case status, customer ID, cust

  • Standard Reports in M M

    Dear All, I need these are all the standard Reports... 1. Purchase Requisition link with Purchase Order Report. 2. Purchase Order, Order Qty, Received Qty(GR), Open Qty Wise Report 3. Purchase Order, Order Qty, Received Qty(GR), Open Qty, Invoice Ver

  • Does X-Fi have built in Flash Memory or internal Hard Driv

    I can't find any specs on whether the X-Fi's internal storage is flash memory or if it uses a hard dri've. I know about the SD card slot and I am not referring to that which of course is flash memory. I mean the 8/6/32 gig storage depending on the mo

  • Actionscript ignored when FLV is skipped

    Hello, I hope someone can shed some light on this issue. I have built a short presentation using Flash CS3. The presentation was to be small enough to be emailed and delivered as a single file. There are some short video clips contained within the pr

  • Major Ozone problem

    I am running Logic Pro 9 on OSX 10.8.2 with Ozone 5. Everything has been working great for a few months. Today I had Ozone open and by mistake I hit the "close window" key shortcut (command +W). My Logic project - the mixer etc. closed, but ozone did