Deregistering PE9 from a dead system

I installed PE9 last year on my PC. the PC system disk died and crashed and I used that as a reason to update my system to a new one. Installed PE9 on the new system - no problem as I can install on two systems. I now want to install PE9 on a laptop but can't deregister it from my old system as it no longer is in existence an the system disk that it was installed on crashed and was unusable. How can I deregister pe9??

This should help:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ma in_Deactivate_your_software

Similar Messages

  • How to disassicoate iPhone from old/dead system?

    I am setting up home sharing, but it states I have activated my phone on five computers, but two of which are no longer working/living…how can I disactivate them?
    Thanks,
    rich

    Authorization has nothing to do with iphone or ipods.
    You can authorize up to five COMPUTERS to one itunes account.
    You can de-authorize all and then re-authorize active computers:
    http://support.apple.com/kb/HT1420

  • Delete Photos Sync'd from a dead MBP?

    I have a collection of photos that were added from my previous Mac Book Pro (it died a horrible death).  I would like to remove them from my iPad, but they will not display the Delete icon when they are selected in Photos.
    How can I get rid of these pictures since the originating system is no longer available?
    Tim

    Thanks, Allan.  That cleared all of the photos sync'd from the dead MBP and it left my current images imported directly from my EOS.
    That's about as non-obvious as anything I've ever run into.

  • Lost all Subclips from project after system crash

    Hi,
    I'm new to the forum and tried to find an answer but I'm not seeing it so I apologize if this is covered somewhere else.
    I've been using Premiere Pro (CS4) for a couple of years.  I've made extensive use of SUBCLIPS for projects and I found they helped organize the building a complex sequence in several documentaries and they have worked well for me - until my system crashed. While the project opens and I find all media, I find that all SUBCLIPS are gone.  Have I lost them forever?  Can they be recovered?
    I have built a new system and installed my old data hard drives, but I have a newly loaded C-drive.  I am running Windows 7 on both the new and the dead system.  I can still extract data from the old C-drive if needed.  
    I am wondering just how Subclips are stored.  They do not appear to be files – where do they live?  Can they be transferred? 
    I would really like to avoid the number of hours it will take to rebuild those subclips.
    Thanks!

    REBDude,
    The right place to ask is over there:
    http://forums.adobe.com/community/premiere
    This forum is about (all) the forums themselves.

  • Can I add a CPU from a dead G5 Xserve to another G5 XServe?

    Can I add a CPU from a dead G5 Xserve to another G5 XServe? One XServe is alive and I can get the info from System Profiler, but the second will not start up. They are both labeled as 2.0 GHZ G5's. Do I just need to remove the one from the dead server and put it in the live one? Will the live one automatically detect the second processor and use it upon boot up? The dead one is S/N QP62217CSLX.

    Hi
    You should be able to do this. I've done something similar in the past. Provided the part numbers are the same (check the EEE codes) you should be OK. The only one real way to find out is to try it?
    As ever make sure you have a fallback position just in case. If this is a production server and if everything rests on it I would make doubly certain of your ground first.
    Tony

  • How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

    The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
    I need to use my Adobe programs, rescue my email, i-tunes and iphoto data.  The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash.  There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
    I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine.  Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

    No, the disk was backed up with time machine a few hours prior to the crash.  I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up)  was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
    I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available.  And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
    Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive.  I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed.  But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive. 
    I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder).  And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash.  That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up.  Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
    I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive.  So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the  Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
    Thanks for any help. Peggy
    Message was edited by: peggy toole

  • My time capsule all of a sudden disconnected from the wireless system and can no longer be fund by my MacBook Pro. The little lamp on the the capsules has turned off, but it still makes a noice inside,

    My Time capsule did a backup yesterday in the morning without any problem. All of a sudden, it disconnected from the wireles system last night and the little indicator lamp turned off. It still makes a noice, as if a disc was turning inside. The Time Capsule was bought last year in June. Any suggestiom what to do? What happens if I press the little buttom (reset?), will I loose af my backup?

    Do a reset.. power off the TC..
    Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
    If you bought it in June.. take it back today.. it is broken.. at a guess.
    Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

  • Data connection from SAP-R3 System to Xcelsius using Web Services

    Hello Everybody,
    Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
    SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
    Data -> Add Web service connections
    by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
    Any idea would be great help
    Note: I tried by following the thread & its not working:
    http://forums.sdn.sap.com/thread.jspa?threadID=1520321
    Thank you,
    Anand
    Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
    Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AM

    Hi,
    With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP"   <- can you tell me more please? references/links/attachment?
    As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
    There are limitations about the complexity of the WSDL - see Notes:
    1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
    1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
    also , changes between SAP versions requires reworking the WSDL
    Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
    regards,
    H

  • Uploading data from non sap system to sap system

    hi to all experts,
    my requirement is to upload data into the sap system from non sap system . the data is in  a flat file ,but the problem is that  in the flat file all the field lengths and fields are not in order or same as sap system. How to upload the data into sap system ....

    hi,
    the data is in a flat file,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system.
    If the data is in excel sheet use this FM.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          FILENAME                      = P_FILE
          I_BEGIN_COL                   = 1
          I_BEGIN_ROW                   = 1
          I_END_COL                     = 17
          I_END_ROW                     = 3000
        TABLES
          INTERN                        = itab
    EXCEPTIONS
      INCONSISTENT_PARAMETERS       = 1
      UPLOAD_OLE                    = 2
      OTHERS                        = 3
    It will read the data from excel sheet column wise and then store it in ITAB. you can change the order after reading the file.
    In case of Text file use FM  GUI_UPLOAD.
    You can change the order of the fileds after reading it from file, but the length and all you have to make compatible to SAP standard fields.
    Regards,
    Sachin

  • Modelling the fields in the cube from different source system.......

    Hi,
    I need to create one query on the cube.
    User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
    These are master data fields ( 7 fields in total) from other source system.
    Cube gets data from one ODS.
    some steps I need to do are :
    1) create new source system
    2) Create corresponding objects in BW.
    3) Model the things in ODS and cube
    Can somebody let me know what is the best way/steps to model such scenario.
    Thanks, Jeetu

    Hi,
    Replicate both the data sources to BW.
    Create 2 infosources/transformations, map them to respective fields and infoobjects.
    Now assign them to cube and load the data
    hope this helps.
    Rgs,
    I.R.K

  • Cannot delete Flash32_11_6_602_180.ocx from an old system disk

    Hi, I am running a Windows 8 64 bit system with the most current version of Flash installed, whatever that is, since I blindly accept whatever update Adobe sends to me.  My problem is that I cannot delete the Flash32_11_6_602_180.ocx file from an old system disk where I have deleted everything else in the Windows folder except the Flash32_11_6_602_180.ocx file.
    I have seen very similar posts by Krischu on November 27, 2013 "Cannot delete/remove Flash32_11_9_900_117.ocx" and by Gdstuart on January 22, 2014 "How to delete Flash32_11_9_900_170,ocx," and I have tried the "takeown" method and the FileASSASSIN method suggested by MikeM to both of those posts, but my Flash.ocx file just won't go away.
    I am the only user of this PC, and my user account describes me as an administrator, but I keep getting the "You need to provide admistrator permission to delete this file" when I try to delete it.
    Does anyone know how to delete this file without doing what Krischu did by loading a Ubuntu system?
    Thanks for any thoughts!

    Well Pat, I definitely do filter what Microsoft tries to load on my system, for example, their insistence in trying to sneak in Bing. Either way, I keep my system up to date constantly.
    Do you understand that the file I am dealing with is on a separate disk from my system disk? I don't see any way that the OS would automatically delete files that are not part of the current OS.
    I took the disks from my old PC and installed them inside of my new PC. The old system was Windows 7 32 bit, and my new system is Windows 8 64 bit.  As I said, there is only one user on my new system, me, and I am the administrator, so there is no "original Windows Administrator password" other than the one that I use every day. The only thing that I can think of is that the file is linked to my old admin user name from the W7 system, but even if that is the case, then why wouldn't  the "takeown" method give me ownership?

  • Move a big file from a mac system to a windows 8 laptop usb usb flash drive

    Hello i am using a 32 gb flash drive to copy a 10gb file from mac os x to my flash drive. Then i want to insert that flash drive to my windows 8 pc and store it there.
    I cant use a network connection to transfer files because i dont have a ethernet cable or an network connection yet. So i must use a smart procedure for making my mac communicate with my pc at home. I cant use any other types of sharing methods except for a usb flash drive. So i know that the mac cannot detect NTFS filesystems and i cant use FAT32 even though mac recognizes it because FAT 32 is unable to store large files abotu 10GB of size. Now i have to use i think ext3 or ext4 or also HFS but when i successfully copy the file from mac to flash drive then insert it into my pc, the windows 8 OS will not detect the windows pc because i dont think windows is made to detect these filesystems by default.
    So i have tried using, HFS explorer and ext2/ext3/ext4 volume manager and ext2exploer or GPARTED live cd's latest version's copy and paste functions but they seem to not work propely and there is a problem, i cannot  see any flash drive in HFS explorer even though my drive is formatted as hfs.
    So i need a program that can detect HFS or ext3/4 formatted flash drives and is able to copy a file from there straight to my windows 8 NTFS hard drive or a folder in it.
    I have checked my firewall settings and defense settings. I am the administrator of my pc and i have even removed the windows password and the mac one but still i get lots of issus JUST to copy a file between a pc and a mac. Remmember that i have to copy files FROM a mac system running snow leopard to my windows 8 pc not the OTHER WAY were i have to copy from the windows to a mac.
    Please tell me as much as possable about software out there and tell me software that costs money. I am able to buy any good software for doing this.
    Thanks in advance.
    raghav

    Take the flash drive to the PC and format it as exFAT.
    (95473)

  • External requirement from non SAP system created in SRM 7.0 Extended Classi

    Hello SRM Gurus:
    Has anyone created an external requirement using XI ExternalRequirement_Create_In (http://sap.com/xi/EBP).  We are getting a E001 "No company code could be determined for backend  for product##".  I traced the error to FM 'BAPI_SCEC_CREATE' in class "CL_BBPX_EXTERNAL_REQUIREMENT".  What I found is that it check the attributes for BUK and updates a table with the backend EEC system.  Then it checks if any of the entries match our external non SAP system in our external requirement and since it is a non SAP system none do.  Then it sets a return error code.
    I configured our non SAP system in the SLD and in SPRO under "Define System Landscape" as a non SAP system.
    We are running external classic scenario.  We just want to created a shopping cart from an external non SAP system.  Source the shopping cart in SRM and create the PO in SRM/ECC.  We are not using a product master but creating "describe requirement" in our external system.  Our product categories are replicated from ECC and the same codes used in our external non SAP planning system.
    If I change the external planning system to the ECC backend system, the external requirement is created in SRM but when I source it and convert it to a PO, it returns a backend error that the external requirement number does not exist in ECC.  Therefore it appears all of our data from our external system is correct with the exception of how to deternine the backend company code
    According to SAP this should be possible using XI.
    Has anyone been successful doing this or can you please advise any OSS notes or documentation explaining how to do this.  Please advise if you need additikonal info.
    Thanks in advance.
    Bert

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Changing from Periodic inventory system to SAP

    Hi All,
    I have an accounting questions regarding company that switching from Periodic Inventory system to SAP's perpetual inventory system.
    For company that practices Periodic Inventory System, the method to calculate cost of goods sold = opening stock balances + purchases - closing stock balances. All these is reflected in the P&L statement.
    When they switch to SAP, do they need to enter all these figures into SAP for the opening balances?
    As SAP will not have opening balance stock, closing stock and purchases accounts, do they have to create these accounts in P&L just to take in the balances?
    Does anyone have implemented for company that changing from periodic to perpetual inventory system? How do you take in the opening balances? if possible please give example, thanks in advance.
    Regards,
    MH

    Hi All,
    Thanks for the reply. But what is the variance that you guys are talking about? Take example:
    Old system:
    Opening Stock balance = $ 5,000
    +Purchases                  = $20,000
    -Closing Stock balance  = $ 9,000
    Balance                        = $16,000
    The amount that goes into Asset is Closing Balance $9,000 and the amount goes to P&L as COGS is $ 16,000? The rest for $20,000 and $ 5,000 can be ignore?
    Thanks in advance if anyone can answer my question here.
    Regards,
    MH

  • Migrate Closed Sales Data from one SAP system to Other

    Hi,
    We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
    Please share your thoughts on the considerations / DOs and Donts for such cases.
    Appreciate your response.
    Kind Regards,
    Tanuji

    Hi,
    If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
    Following are the considerations:
    1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
    2) You might want to have a reference no somewhere in the new transactions from the previous system.
    3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
    Regards,
    Raghu.

Maybe you are looking for