Derivation of Profit centers

Hi gurus,
I am having a hard time trying to inherit the profit centers from the original documents for follow on documents such as Interest.
Do you know if there is any event or standard configuration where I should indicate that the profit center should be inherited, and not taken from the customizing point "Define CO Account Assignment Keys" and "Automatic G/L Account Determination"->"IS-U: Define Acct Assignment Data Relevant to Transactions".
Thanks
Edited by: BPX PARTNERS on May 15, 2008 12:53 AM

Hello,
I did not get you. Profit centers are attached in the Config EK02. Based on your MT/ST- Profit Center combination, your document would be posted.
If this is not what you are looking for, pls let me know the requirement in detail
Hope this helps
Rgds
Rajendra

Similar Messages

  • Automatic derivation of Profit centers

    hi all
    is there a possiblity that profit center can be derived based on the customer?
    rquirement is .. profit centers are divided geographically, they have only one revenue account . and based on the customer we can tell to which profit center that revenue line item is to be posted. how can we achive this in the SAP.
    in 3kei i am seeing GL account but not customer. is there any other way
    pls help
    thanks in advance
    kalyan

    Hello you can go for a substitution, create a set of customers for a region and then you can give the pre req as if the customer is from set 1 then substitute with the appropriate profit center. use ggb1 for substitution
    points will be appreciated
    Regards,
    Zaid Azam

  • Derivation of Profit Centers in case of bank and Cash line items

    We are in the process of configuring the Profit Center Accounting functionality. We are in ECC 6.0 but have not migrated to New G/L.
    We understand that Profit center needs to be derived for each of the items for which it does not flow online in realtime. As regards Bank and Cash Line Items, we are not able to understand how Profit Center Derivation will happen.
    We have posted an FI payment document using Tcode F110 and further to which we executed F.5D and 1KEK. Further to this, we have checked the Profit Center Total records report (2KEE). It updates the vendor line items. But it does not reflect the Bank line item. Unless this happens, we understand that our Profit Center wise Trial Balance will not tally.
    Kindly let us know how bank and Cash line items will update in PCA. In our view, it should derive the Profit center from the offsetting entry in the vendor invoice. Pl. correct me if I am wrong.
    Pl. help.
    Venkat Iyer

    Hi Venkat,
    You may define a derivation rule in 3KEH
    Regarda
    Sachin

  • Deriving the profit center / segment during Bank Reconciliation

    Hi SDN,
    One of our requirements is to generate a Financial Statement by Segments.
    For this reason, we also need to derive / tag our Bank Reconciliation documents (Manual and Electronic) to the corresponding profit centers or segments. The problem though is that during FF67 or FF_5, there's no way we can enter these data.
    At the same time, we can't set a default profit center via FAGL3KEH since these bank accounts may be used for multiple profit centers and not defaulted to one only.
    My question now is, can we use the document splitting functionality so that we can "inherit" the profit center / segment from the payment document during bank recon?
    To give you an idea here's a sample flow of what we wanted.
    Customer Invoice (GL view)      - OK in the system
    Dr  Accounts Receivable  (profit center 1) *inherited
    Cr  Revenue Account (profit center 1)
    Incoming Payment (GL view)     - OK in the system
    Dr Incoming Clearing (profit center 1)
    Cr Accounts Receivable (profit center 1)
    Bank Reconciliation        
    Dr Main Bank             (profit center 1)
    Cr Incoming Clearing (profit center 1)
    Currently, system does not inherit the bank reconciliation document to the right profit center. Is there any way we can do this in the system?
    Thanks

    Dear,
    During bank Reco system inherit the Profit Center from the document which it is clearing. There is no need to maintain Default the same in FAGL3KEH.
    Please activate splitting at Profit Center level.
    Hope this helps!!
    Br,Vivek

  • Profit centers with COPA

    Hi,
    I have a few doubts about the need of EC-PCA in a project where COPA is being implemented.
    The client would like to get info about the profitabilyty of organisation units as well as products, groups of products, clients and so on.
    However he is unable to assign materials to only one profit center (which would be production departaments in this case). Different Finished goods, semi finished goods, wares and services can be assigned to more than one production departament. (a material index cannot be assigned to only one PC in this case).
    What would u advise me? Should I use EC-PCA but change the PC hierarchy or COPA is enough for these purposes?
    Best wishes,
    Karol
    Message was edited by:
            Karol W

    Dear Karol,
    Here the some infirmation is about Profit center related and cost center.hope this infirmation will helps you
    You would need check the design of PCA and what the business wants to use PCA for. For example do you want to produce P&L Statements and or Balance Sheets by Profit centers etc.
    In terms of the cost center assignment to profit centers, the main use of this is to ensure that all costs posted to a cost center will be simultaneously posted to the assigned Profit center. Now in PCA configuration you have to create a "Dummy Profit Center", the consequence of this is that if a profit center cannot be derived (for example if you do not maintain a profit center in the material master) or from the cost center or a profit center is not entered in a posting, the entry will be automatically posted to the "Dummy" profit center.
    In terms of design, we are faced, in certain circumstances when we design PCA along the product lines for example, what to do with certain postings such as bank charges or admin costs, which are not directly attributable to the product line.
    One way to treat these, is to Create a "Corporate" or "ADMIN" Profit center and assign all the service cost centers to this Profit center and at month end re-allocate to the Product Line Profit center via Distribution or Assessment for example based on sales volume or fixed amounts or percetntages or SKF's to make the reporting more meaningful
    create additional profit centers and assign all admn, IT other than production cost centers to either Common, Admin or Corporate profit centers. Suggest you create following non product cost centers
    1) Corporate
    2) Admin
    3) Product Common
    Assign profit centers to cost centers logically
    In MM master records assign product related profit centers to RM and FG / SFG material types. This takes care from material accounting point of view in PCA
    For transfer of costs collected in Non Product related profit centers proceed as follows
    1) Create PCA assessment Cycles
    2) At month end allocate these expenses and check cost in non product profit centers is zero.
    3) Decide on the allocation basis
    4) This ensures that you have PCA wise all P&L items accounted.
    5) You can then design PCA wise report painter reports for PCA wise P&L
    Hope the above will help you
    Prem.

  • Default profit centers Plant wise for Balance Sheet tax relevant Items.

    Dear All,
    We have an issue in profit center acccounting.
    In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
    Why it is so?
    Basically we are doing the following steps.
    1. Purchase order creation ME21N.
    2.Goods received via migo
    3. invoice receipt via miro.
    At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
    We need to extract the Balance Sheet profit center wise at plant level.
    Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
    I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
    Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
    It is urgent.
    Thanks,
    Shailendra Gupta.

    Hi!
    You can use following report :
    S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
    Hope this will help.
    Thanks & Regards,
    Taral Patel

  • We need to transfer amount from one profit center to another profit centers

    Dear Gurus,
    We need to transfer amount from one profit center to another profit centers, wrongly posted how to do it?
    GL 600000 Sales a/c Domestic,
    around 5000 FI documents has post in worn profit center
    In the billing with material line items showing the correct profit center.
    we want reverse the GL 600000 a/c in our system what will be the impact in COPA Reporting. and how to do it?
    Pls advice me for the above said issues as we are nearing the year end pls help me.
    Thanks..Srirama

    Hai,
    You can do profit center posting 9ke0
    Profit center will derive from Material in your case it seems some subtitution changing the correct profit center in material master and putting this wrong profit center
    Profit center is not the deciding factor for COPA reports so there wouldn't be any impact in COPA report
    BR
    VSN

  • OKB9 does not work to derive a Profit Center from Document splitting

    Hi GL Gurus,
    I am trying receive customer payment with payment difference. Original invoice has two Profit centers so Customer line items have these 2 PCs derived by Doc splitting. I have defined Document splitting characteristic as Profit Center in General Ledger and In Controlling as Cost center. While posting Customer payment with payment difference , It gives me error that CO object does not exist. I have done OKB9 assignement to the above 2 profit centers but it still does not derive a Cost center.
    Do you know how to resolve this error?
    Thanks in Advance!

    I have done OBXL and then OKB9. In OKB9 you have feature as "Mandatory fields for detailed account assignments.Field for specifying detailed account assignments." Here you can define for a Cost element/by Profit center assignment and then to a Cost Center. This works when you have a Cost element/Profit Center combination. But the situation above it does not read the PC derived in Customer line item.
    The issue is OKB9 does not Read the Profit Center when it is derived by Document splitting/Inheritance.
    Is there a solution to do this?

  • Pulling Profit Centers from AR

    Hi,
    We are currently using 0FI_AR_4 extractor to pull AR related information. One of our requirements requires us to analyze by Profit Centers. From what I understand profit centers are derived at material level hence the current extractors is not able to pick up this information if there are more than 1 material. How do I go about pulling this information ? I believe data needs to be pulled from table BSAS / BSIS ? Should i use 0FI_GL_4 instead ?

    You are right, 0FI_AR_4 and 0FI_AP_4 pulls from BSID/BSAD and BSIK/BSAK but I am also not able to find any standard extractor for BSIS and BSAS.
    One way around for this is to create your own extractor.
    For profit center accounting you have standard extractor, chk EC-PCA in RSA5.

  • COPA derivation - dummy profit center

    Hey All
    While creating a sales order the system is deriving the dummy profit center for materials assigned to only couple of Profit centers. The material master has right profit center with active status and correct validity dates. I checked the derivation rule in ke4st where a function call line is yellow. this line is realted to checking if profit center accounting is active.  Can anyone suggest me why is this happening with only for two of these profit centers

    SAP provided multiple derivation rules for profit center, the first one is to 'Check whether Profit Center Accounting is active' and if so DUMMY profit center is filled. You should also see follwoing derivation rules to check profit center.
    Table lookup            Profit center from product/plant
    Table lookup            Profit center from CO order number
    Table lookup            Profit center from WBS element
    Please check the derivation rule 'Profit center from product/plant' and check the Target fields section and see if derivation failed.
    Regards,
    Ganesh

  • How can I get all prctr ( profit centers ) ?

    While creating function module,
    I have created import parameter as 'ZIMPORT_PRCTR' for Profit Center
    ( cepc-prctr ) in my zfunction module .
    It takes( imports ) input of multiple values Profit Center.
    Next what I need to do is, if end user enters multiple values of profit center
    ( IF ZIMPORT_PRCTR[] IS NOT INITIAL. )
    Then…  I have to use user entered values for picking up some other data from other tables.
    Ques). IF user don’t enter any profit center value, then
    I need to take all profit centers into consideration and pick up other data from other tables  .
    How can I get all profit centers ( if user does’t enters any value )
    And I don't have any values to use in my where condition ?
    Could you please help me ?

    create one structure in Se11 like
    profit center low
    profit center high
    option
    sign ( Like select-option ,see the rsparams structure),use this strucire in Function module ..
    when compare the data in select query ,in where condition use as in operator,if user does not enter any value ,it gets the all the value from table.

  • G/L Account Line Items/ Profit Centers/ FBL3N/ F.5D/1KEK/KE5Z/BalanceSheet?

    Hi Experts,
    Am running FBL3N-G/L Line Item Display, and am trying to get PROFIT CENTERS for Balanace sheet type of accounts, but Its not showing up.
    But, am getting for Profit Loss accounts.
    1) Why its so?
    2) Then How to get the PROFIT CENTERS for them? (I know they r available, in BSEG)
    3) Functional owner said(tele talk, no voice clear!!!) that, the Profit Centers are NOT get updated UNTIL month end, unless run the F.5D, 1KEK, KE5Z tx.s., which inturn system copies the profit centers(I dont know that, From where it copies) and posts/updates(I dont know, Wht get updated?), so, he said, relying on ??(is it BSEG??????) is not works out!!
    So, let me know that,
    Wht does its mean? Wht NOt get updated until month end?unless run the F.5D, 1KEK, KE5Z tx.s? Is it DataBase? BSEG?
    4) Is BSEG table get updated, as soon as any FICO document ceated by user? I mean, Can I relay on BSEG always, for pulling the profit centers data for Balance sheet accounts, all the time?
    5) If NOT, them Where Can I find them?
    thanq

    Hi Srinivas,
    You have to declare balance sheet accounts as relevant for PCA inside 3KEH transaction in config. So you mark the balance sheet accounts that should appear in PCA in 3KEH with a default profit center which can be overwritten with the use entry.
    Fixed Assets, AR/AP and WIP can be transferred into PCA at the monthend. PCA is a separate ledger, has its own set of tables and reports. Inventory and other balance sheet accounts are posted into PCA online.
    Hope this helps.
    Sharabh Ivaturi

  • G/L Account Line Items/ Profit Centers/ FBL3N/ F.5D/1KEK/KE5Z/Balance Sheet

    Hi Experts,
    Am running FBL3N-G/L Line Item Display, and am trying to get PROFIT CENTERS for Balanace sheet type of accounts, but Its not showing up.
    But, am getting for Profit Loss accounts.
    1) Why its so?
    2) Then How to get the PROFIT CENTERS for them? (I know they r available, in BSEG)
    3) Functional owner said(tele talk, no voice clear!!!) that, the Profit Centers are NOT get updated UNTIL month end, unless run the F.5D, 1KEK, KE5Z tx.s., which inturn system copies the profit centers(I dont know that, From where it copies) and posts/updates(I dont know, Wht get updated?), so, he said, relying on ??(is it BSEG??????) is not works out!!
    So, let me know that,
    Wht does its mean? Wht NOt get updated until month end?unless run the F.5D, 1KEK, KE5Z tx.s? Is it DataBase? BSEG?
    4) Is BSEG table get updated, as soon as any FICO document ceated by user? I mean, Can I relay on BSEG always, for pulling the profit centers data for Balance sheet accounts, all the time?
    5) If NOT, them Where Can I find them?
    thanq
    Edited by: Srinivas on Apr 7, 2008 3:42 PM

    no repy

  • Having Multiple Material Codes with Different Profit Centers in one Plant

    Hi,
    Can someone explain me what impact it will have, if there are different Material Codes with multiple profit centers in a single plant? For example, say Material 1 has Profit Center as PC1 and Material 2 has Profit Center as PC2 and they are in a single plant. Will this have impact on Financial Transactions?
    Thanks and Regards,
    Sameer Joshi

    Hi Sameer
    No negative impact.. It is very much possible and logical
    All the purchases made - > Stocks and vendor liability will be tagged to the PC of the Material
    All the sales made -> COGS, Revenue and Customer Liability will be tagged to the PC of the material, unless you overwrite using a Substitution
    Br, Ajay M

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

Maybe you are looking for