Designe for migration....

Hi all!
My head say that i do use oracle designer for migration by SQL SERVER2000 to Oracle9!
I have study that it's much possible with migration workbench but he want it!
Can you say me the different?And if is a good why designer?
Thank a lot, in advance!
Marie

Hi,
Did you get any answers for this? We are also facing problems while using the FM  BAPI_BUS2177_STAFFING_ADD
When we call  BAPI_CPROJECTS_COMMIT_WORK it returns with an error. When tried to debug, found that system raises an event save_requested and then error occurs.
Please let us know, if you resolved the issue and could upload staffing data.
Thanks in advance.

Similar Messages

  • Utility for migrating Domain Definitions from Oracle Designer to JHeadstart

    Hi,
    I am currently involved in the migration of a pretty substantial application, developed with Oracle Designer’s Web Server Generator, to the Oracle ADF technology stack, using JHeadstart. You know I am a big fan of JHeadstart for a number of reasons, but this particular application is ideally suited for JHeadstart (or I should say the other way round of course). JHeadstart and ADF can do everything Web PL/SQL Toolkit and the Web Server Generator can do - and much, much more. So both end users and developers of this application stand to gain from the migration.
    However , due to special technical limitations in the Web Server Generators and the inventive hand-crafted work-arounds, I can use the JHeadstart Designer Generator migration tool only for th 60% really simple maintenance modules. The other 40% is better off with building from scratch.
    There is one piece of information in Oracle Designer that is quite useful to me - that is the Domain Definitions. The sets of allowable values that power the dropdownlists and radio groups is needed in JHeadstart’s Application Definition file, and the current edition of the JHeadstart Designer Generator does not allow the migration of Domains (only complete modules are supported).
    In this article: http://technology.amis.nl/blog/?p=1352 is describe a way to migrate a selected set of domain definitions from Oracle Designer to JHeadstart. This approach works for all releases of JHeadstart - from the early beginnings back in 2002 to the latest 10.1.3 release.
    best regards,
    Lucas

    Probably better to ask / confirm this on the Warehouse Builder forum, but ....
    I believe that OWB will always indicate a default value for NotNull columns. It might also do this for value-constrained columns (one where you have set Allowable Values directly for the column or for a domain associated to the column). In a normal situation, most column definitions are NullAllowed, but if you're doing some simple test runs and have nothing but key columns and some rudimentary data columns then you might have inadvertantly caused this situation.
    hope this helps

  • How do I know what are custome code deployed on my site for Migration from 2010 to 2013

    We have around 500 sites and several Webapplication. Now we want to migrate site from SharePoint 2010 to 2013
    We will use Metalogix tool for Migration. However we want to know which custom changes site Have , SO those WSP we can deployed on 2013, So that Site will work fine After Migration.
    SO question is there is any way where I can find what customization site have ?
    I want poweshell which will tell me these WSP have deployed on this Sitecollection , SO that only those I will deploy on 2013 ? ALso
    Suppose I have created Workflows through designer , is there any powershell which will tell me these workflow have deployed on particular site, so that I can check is those Migrated successfully or not.
    Please mark answer , if you think answer is helpful or correct.

    Hi,
    Please see the link below that will give you detailed steps to identify customizations
    Checklist for upgrade
    Cheers
    FrenchSpeaker - MCTS

  • XI as a tool for migration

    Hi Friends,
    Can we use XI as a migration tool? If i want to move all data of my non-sap system to sap system, can i go for xi?
    If we can use XI, what are all the challengs i'll have and the areas i need to focus more while designing the implementaion?
    Your views on this greatly appreciated.
    Thanks & Regards,
    Senthil.

    Hi,
    >>Is it going to deal with high volume of data or something else?
    yes +
    many programs for data import are already developed in ABAP
    (reports) so it would require to change them to FM (pretty time consuming)
    with LSMW you can see the errors directly and with XI you'd have to log on to SAP
    lookups with LSMW you can use ABAP to lookup every table with XI - API lookup for migration ? too high volume I'd say
    LSMW offers almost the same mapping functions as XI
    (and if you use excel for migrations it's even better)
    so I'd not use XI for sure for migrations
    Regards,
    Michal Krawczyk

  • Headstart Designer 10g Migration Guide?

    Is there a Headstart Designer 10g Migration Guide?
    We are migrating our forms application generated from Designer2K 2.1, Forms 5, Headstart 212 with repository in database Oracle 8 to the latest releases Designer 10g (10.1.2.0.2), Forms 10g (10.1.2.0.2) with repository in Database 10g R2 (10.2.0.2).
    If we follow the migration path for designer and the repository database to 6i then to 10g, recompile the object library and form templates, regenrerate our modules, then will it still work? Do we need to do anything to the Headstart Designer Template Package? Hope you can help with a road map.

    Hi Nathan,
    there are several possibilities for a migration path. It depends on the expected life-span of the application(s), wether or not you want to use new Headstart functionality, etc.
    A description of these possibilities can be found in the migration guide which is included in the Headstart 9i/10g documentation. Do you have the latest version of Headstart available?
    Because you currently use an older version of Headstart, a migration will take a bit more work than described in this documentation because Headstart code has changed. So you will have to replace Headstart function calls or create a wrapper library.
    Further, regeneration of (the more complex) Forms is not that simple as you will probably have to modify the lay-out. If you use client-side functionality (open MS Word/Excel, write to the local file system, etc), you will have to use Oracle's Webutil-package.
    So it can be done. But it will take some planning and programming. Succes.
    p.s. if you (temporarily) publish your e-mail address, i can provide you with some additional info.

  • How will an external Hard drive designed for the macbook Pro work with my White Macbook?  My  white macbook has a Firewire 400 and the G-Tech HD has a 800 to 400 compatible cable for the firewire.

    I am asking this because I want the G-Tech Hard drive  says that it is designed for the macbook pro.  Yet, I want to back up faster with by using my firewire 400 which is not an option on the one designed for the white macbook that does not have a firewire (only a USB port.)  The G-Tech Hard drive comes with the 800 to 400 compatible cable and has 5400 RPM with 750 GB.  Also, I've heard that laptops with low battery (mine all the time)  won't have the power for a bus powered Hard drive (as in no ac plug in adaptor.)  Can I just plug in my laptop?  Any one know the answers from experience with this hard drive?

    As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
    If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

  • Is this the best design for asynchronous notifications (such as email)? Current design uses Web Site, Azure Service Bus Queue, Table Storage and Cloud Service Worker Role.

    I am asking for feedback on this design. Here is an example user story:
    As a group admin on the website I want to be notified when a user in my group uploads a file to the group.
    Easiest solution would be that in the code handling the upload, we just directly create an email message in there and send it. However, this seems like it isn't really the appropriate level of separation of concerns, so instead we are thinking to have a separate
    worker process which does nothing but send notifications. So, the website in the upload code handles receiving the file, extracting some metadata from it (like filename) and writing this to the database. As soon as it is done handling the file upload it then
    does two things: Writes the details of the notification to be sent (such as subject, filename, etc...) to a dedicated "notification" table and also creates a message in a queue which the notification sending worker process monitors. The entire sequence
    is shown in the diagram below.
    My questions are: Do you see any drawbacks in this design? Is there a better design? The team wants to use Azure Worker Roles, Queues and Table storage. Is it the right call to use these components or is this design unnecessarily complex? Quality attribute
    requirements are that it is easy to code, easy to maintain, easy to debug at runtime, auditable (history is available of when notifications were sent, etc...), monitor-able. Any other quality attributes you think we should be designing for?
    More info:
    We are creating a cloud application (in Azure) in which there are at least 2 components. The first is the "source" component (for example a UI / website) in which some action happens or some condition is met that triggers a second component or "worker"
    to perform some job. These jobs have details or metadata associated with them which we plan to store in Azure Table Storage. Here is the pattern we are considering:
    Steps:
    Condition for job met.
    Source writes job details to table.
    Source puts job in queue.
    Asynchronously:
    Worker accepts job from queue.
    Worker Records DateTimeStarted in table.
    Queue marks job marked as "in progress".
    Worker performs job.
    Worker updates table with details (including DateTimeCompleted).
    Worker reports completion to queue.
    Job deleted from queue.
    Please comment and let me know if I have this right, or if there is some better pattern. For example sake, consider the work to be "sending a notification" such as an email whose template fields are filled from the "details" mentioned in
    the pattern.

    Hi,
    Thanks for your posting.
    This development mode can exclude some errors, such as the file upload complete at the same time... from my experience, this is a good choice to achieve the goal.
    Best Regards,
    Jambor  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Print Layout Designer for UDO

    Hi,
    Can we design report with print layout designer for UDO forms?
    If yes, how do we accomplish this?
    If not, is there any other alternative?
    I am using 2004B. Thanks.

    I use the iTextSharp project to create PDF's (http://itextsharp.sourceforge.net/)... its free and it works (A little hard to use, but it works). A more simple PDF-project are SharpPDF (http://sharppdf.sourceforge.net/). This is also free and very easy to use, but not that many features.

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • Getting error while publishing workflow using SP designer for SharePoint 2013

    Hi,
    I am try to setup Workflow manager for our sharepoint applications.
    WF manager set ran without any issue.
    I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
    I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
    The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
    "Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
       at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
       at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
    Any help would be highly appreciated
    Thanks,

    Hi,
    According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
    Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
    Please check whether the “Configure service application associations”,  ”App Management Service” is already associated.
    Then please check whether the “Manage Services on server” and the “App Management Service” is started.
    In addition, please try to re-register Workflow Service.
    If the issues still exists, please follow the steps in the
    Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
    Steps to Troubleshoot Workflow Management Service and
    Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
    More information:
    http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • This workflow cannot be imported because it was created in SharePoint Designer for a different Site

    Hello everyone.  I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
    "This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted.  To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
    drawing."
    So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production.  I've put quite a bit of time into one
    particularly and would like to export/import rather than re-created from scratch.
    I've successfully created the form template and imported.  This created the necessary list items nicely and the form appears to work as expected.  However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
    error.  If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
    is lost.  I need to be able to overwrite/merge the existing workflow with the import.  Any suggestions?
    One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
    light on the subject. Thank you.
    Adam Tyler

    Hi Adam,
    Here is a blog talk about the same issue would be helpful:
    http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
    Best Regards
    Dennis Guo
    TechNet Community Support

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • EMIGALL performance for migration object OBJCLASS

    Hi all,
    my previous question, was Classification of IFLOT & EQUI via CLB2 / CLB1  & was focused on improving performance of classification of IFLOT & EQUI objects.
    Testing EMIGALL for migration object OBJCLASS I am seeing no performance gains between a single thread update & parallel update threads.  IE the single thread throughput is reported as ~the same as the parallel threads throughput combined.
    I note in the job logs of my various tests;
    for a single thread, that no messages are logged between the start & end of the migration.
    for parallel threads, that message C4 200 'Class "CLASSNAMEHERE" is locked' appearing many times.
    I don't see any unexpected migration errors in ether case.
    Are there any insights on how I might improve over all throughput using this method? I cant see any control parameters for this object, nor does the Guideline have much information on OBJCLASS.
    First world problems :-/

    Hello Daniel,
    Without having much insight into your system and infrastructure details or the volume that you are working with, I suggest for you to try below for performance improvement.
    1. Run DB Statistics on functional location and Equipment related tables such as EQUI, IFLOT, ILOA, etc. (these are HLO objects that you are updating by way of classification). Also update classification table such as AUSP. These tables mentioned here as a starting point.
    2. Also strongly suggest that a performance trace be done on this job to analyze and identify another table or steps that may be a performance bottleneck and maybe a candidate for DB statistics refresh Or some other corrective action.
    3. The locks maybe occurring due to a mass update which is as expected. Perhaps to get by that you may want to use "commit buffering allowed" option for this migration object and set to say a number "10" or "20" to start with and see if it helps better the performance. As you would have noticed, locks will also impact performance.
    4. Please also refer to Cookbook for ISUMIG Performance and refer to sections for DEVICE, CONNOBJ and DEVLOC. These are HLO objects for classification and there may be some useful insight in that document too.
    Hope this helps.
    Ash

  • Best practice for migrating IDOCs?

    Subject: Best practice for migrating IDOC's? 
    Hi,
    I need to migrate some IDOC's to another system for 'historical reference'.
    However, I don't want to move them using the regular setup as I don't want the inbound processing to be triggered.
    The data that was created in the original system by the processed IDOC's will be migrated to the new system using migration workbench. I only need to migrate the IDOC's as-is due to legal requirements.
    What is the best way to do this? I can see three solutions:
    A) Download IDOC table contents to a local file and upload them in the new system. Quick and dirty approach, but it might also be a bit risky.
    B) Use LSMW. However, I'm not sure whether this is feasible for IDOC's.
    C) Using ALE and setting up a custom partner profile where inbound processing only writes the IDOC's to the database. Send the IDOC's from legacy to the new system. Using standard functionality in this way seems to me to be the best solution, but I need to make sure that the IDOC's once migration will get the same status as they had in the old system.
    Any help/input will be appreciated
    Regards
    Karl Johan
    PS. For anyone interested in the business case: Within EU the utility market was deregulated a few years ago, so that any customer can buy electricity from any supplier. When a customer switches supplier this is handled via EDI, in SAP using ALE and IDOC's. I'm working on a merger between two utility companies and for legal reasons we need to move the IDOC's. Any other data is migrated using migration workbench for IS-U.

    Hi Daniele
    I am not entirely sure, what you are asking, Please could you provide additional information.
    Are you looking for best practice recommendations for Governance, for example: Change transports between DEV, QA and PRD in BPC 7.0?
    What is the best method? Server Manager backup and restore, etc  ?
    And
    Best Practice recommendations on how to upgrade to a different version of BPC, for example: Upgrading from BPC 7.0 to 7.5 or 10.0 ?
    Kind Regards
    Daniel

  • Best Practice for Migration of BO  from one server to another

    Hi All,
               I would like to know what is the Best pratice for Migration of BO from One server to another.
    i have Installed BO Xi R2 on my server.
    Thanks,
    Anendu Bothra
    Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

    You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
    Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
    Choose Copy, then click OK.
    Choose the version information for the source CMS database.
    Select the database type for the source CMS database, and then specify
    its database information (including host name, user name, and password).
    Select the database type for the destination CMS database, and then
    specify its database information (including host name, user name, and
    password).
    When the CMS database has finished copying, click OK.
    Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
    I'd advise taking full backups beforehand.

Maybe you are looking for