Designer makes items not navigable, when it shouldn't

A very simple question.
I'm creating a simple master-detail module like this:
CompA
|
|
^
CompB
I want to only use CompA for querying, so I put Query=Yes, Insert=No, Update=No to all it's items.
I want to use CompB to be a normal table, and put
Query=Yes, Insert=Yes, Update=Yes to all of it's items.
After generate to Forms all the Items in CompA are Enabled=No, Keyboard Navigable=No.
If i start the form this way, I cannot enter any of the items in CompA and because of that cannot even start Query-mode, because the cursor automaticaly goes to items in CompB and I'm greeted with a message "In order to query in CompB, you have to choose a record in CompA". Of course, that's correct!
So, although this is a very simple form, I have to check "Prevent generation", start Forms Builder, and set the Items in CompA to Enabled=Yes and KeyboardNavigable=Yes manually, compile it, and then it works fine.
Am I expecting too much out of Designer, is this a bug, or is it a feature which I'm not yet familiar of. If it's a feature than please explain why, and how to get rid of it :)

Hi
When you are setting properties insert=NO and update=No Oracle Designer Generator uses CGSO$<TYPE>MR<CT>DO item from OLB, Suffix DO means Display Only. When generating FMB it takes properties of item from OLB. So I think all that you need just correct OLB or set template property in Designer manually. For example if you need your item to be navigable set this property to CGSO$NUMBER_MR or CGSO$NUMBER_CT. MR - for items in Multi Record Block and CT for items in Control Block, but however it depends on OLB that you use.

Similar Messages

Error : GCC ( gnu c compiler)make command not available when I install gnuplot-4.4.3 on OS X10.6.8.

Dear all,
I hope this is clear
Goal: To install gnuplot for OS X.
Problem: gcc make command not found. When I try to install gnuplot 4.4.3 on os X 10.6.8
System hardware : Mac mini 2010.
OS : OS X 10.6.8 snow leopard
Application installed working : TeXshop 2.3.7, AquaTerm v1.0.1 (1.0.1)
Questions: Any help or advise on how and where to get the make command ?

BTW...This is my error message at terminal....shown below
Last login: Thu Feb 23 09:37:21 on console
/Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
lims-mac-mini:~ lim$ /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... no
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/Users/lim':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
logout
[Process completed]

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

When validate item not firing when exit with mouse

Hi
I have a when validate item tirgger on an item.
it fires fine when I use tab from keyboard after validating
but when i navigate to another field with the mouse, the trigger does not fire.
it only fires when i try to close the window..
how can i overcome this?
thanks

Normally, a WVI trigger ALWAYS runs when you leave a field no matter how you leave it (after you have entered something, of course). If it is not running, then you should check whether you have messed around with Set_Form_Property and Validation_Unit.
Or maybe you have some code in your key-next-item trigger that runs that makes you think it is the when-validate-item trigger.

Newly Created items not seen when creating a quote

Hi,
I created a new item and now I am trying to add this item in the my new quote. I cannot find the item. Is there any concurrent program or any setup I need to do so that it reflects in the quotes. Please help as I am new to this and not aware of the functional setups for this.
Thanks in advance.
Regards,
Bm

Hi,
Please review the following document:
Cannot find items to add to a Quote (Doc ID 340933.1)
Excerpt from this document:
1. Determine where the application is searching for the item by checking the value for the profile 'ASO: Enable Intermedia Search'
     If set to Yes - both the interMedia Search and Inventory tables are searched
     If set to No - only the Inventory table is searched
     Note: In R12, the HTML UI will always use the interMedia search.
2. Verify the inventory item meets the following criteria:
A) The current date must be within the start and end date range set for the product
B) The product must be valid for the inventory organization of the operating unit in which the quote is created.
C) The product must be in the default category set defined for/in the functional area "Order Management."
Inventory Organization is determined as follows:
- Quoting UI first reads the value of profile ASO: Category Set.
- If this profile is not set, it reads from OM functional area.
    (Navigation -> OM > Setup > Items > Categories > Default Category Sets)
using the OM responsibility which points to the same OU as the Quoting responsibility.
D) The product must have the "Customer Orders Enabled" flag enabled..
E) The BOM Item Type must be Model or Standard.
F) The Primary UOM is not ENR.
3. If the interMedia search is enabled, make sure the iStore Search Insert concurrent program was run to populate the interMedia search table.
See Note 261454.1 - 'How to reduce the number of records inserted by iStore Search Insert?' for information on the profiles that determine which items are inserted into this table by the program.
See Note 1263758.1 - How To Locate which Responsibility the iStore Search Insert Concurrent Program can be run from?
Note: Only interMedia Search is supported in R12 HTML Quoting. Hence, it is enabled by default.
Additional troubleshooting queries are in this document.
Regards,
Debbie

Cleared items not appearing When we click cleared items in T.code FBL3N

Hi all,
        We have prepared one ABAP program, to clear all open items for a particular GL account, company code, period, fiscalyear,
         When we run this program, the open items are clearing but not appearing in cleared items,
         Can any one help me out on this........
Appreciated with points...
Regards,
sai........

Hi,
Check the cleared items in table BSIS, if the items are clearing then those items should appear in this table. Otherwise i doubt your program is not working?
Debug the program and check from which tables its selecting the data ie it should select the GL open items from table BSIS.
Raj

PO-Freight cost (header, diff currency with items) not distributed when GR

Dear Gurus,
I've one PO with freight cost at header level (1000 VND). In the PO, this freight amount shown to be distributed successfully to line item (value base, line item 1 is 300 VND, line item 2 is 700 VND). But when doing GR, the freight cost of each line item is NOT distributed but equals the total freight amount (line item 1 is 1000 VND, line item 2 is 1000 VND).
In this PO, vendor is international vendor, goods in USD. Freight cost is in local currency (VND)
The configuration for this freight cost condition is at Header level, Group Condition ticked; Calculation type: Fixed Amount; Scale Basis: Value. When the currency of freight cost and goods are the same (all in USD), I have no error as above.
Please help to solve this issue.
Thanks.

Hi
I am facing the same problem in my client. It would be great if you can share how you resolved the issue of Freight Cost
Regards
Athar

Why are my sent items not stored when sending from Apple Mail?

Hello Apple Support Communities,
I am Using an iMac at my place of employment. It is running OSX Yosemite v10.10.2 . I am also using Apple Mail to connect to our Exchange 2010 Server. I do the same with my iPhone, iPad, and Windows Laptop using Outlook 2013. For a while now, several months in fact, It turns out that any emails sent from my iMac using Apple mail will not store a copy of it in my sent items on the server. They are not stored in the iMac account, the iPhone, the iPad, or Outlook on my Windows Laptop. However, any email sent from the other devices will have a copy stored in the sent items folder and it will propagate to all of my devices.
Upon investigating, I found myself looking through the tracking logs of my Exchange Server and found that Apple Mail and the iPhone send messages completely differently. I think this might be the source of my problem, but I have no clue whether I can fix it, or even where to start. Here is an image depicting the logs. Any input would be appreciated. Thank you for your time!

Sometimes this issue is caused by a misconfiguration or incompatibility of the Exchange server, or perhaps by a bug in Mail. If so, you won't be able to resolve it yourself. The fact that your iOS devices may be working well with the same account isn't relevant, because iOS uses a completely different protocol (ActiveSync) to communicate with Exchange servers. By default, OS X Mail uses the EWS protocol.
Each of the following steps has been reported to help with Exchange issues, at least temporarily, in some cases:
1. Back up all data. Open the Internet Accounts pane in System Preferences and check to make sure you don't have duplicate Exchange accounts. If you do, delete all but one of the duplicates. If there are no duplicates, delete the account and recreate it with the same settings. The messages will still be on the server.
2. Rebuild the affected mailbox.
3. Reindex messages.
4. In the Keychain Access application, delete the password item for the account. The next time Mail tries to access the account, you'll be prompted for the password. Check the box to save it in the Keychain.
5. If you've created subfolders of any Exchange mailbox, log in to the server through its web interface, move the messages out, and remove the subfolders. For best results, a mailbox should have no subfolders.
6. Synchronize with the server using IMAP rather than EWS. This is only possible if IMAP is enabled on the server.
7. Consider using Outlook instead of Mail to access your Exchange mail.
See also this discussion.

HANA XS - How to fix Inactive Testing issue of items not loading (when using the cookie)

Is anyone else having issues with the inactive testing using the cookie (sapXsDevWorkspace)? My team has abandoned using it because it is causing us a lot of trouble. It initially worked well for a few hours, but eventually it stopped loading resources. We got errors loading the SAP js libs or even the newly commited ( but not activated) code changes.
I have seen the feedback on SCN post http://scn.sap.com/thread/3517042 but we cannot seem to fix the issue of the system not loading things. I am on version SPS7 (1.00.70.00.386119) on AWS and I have seen it work for a short period then it seems to get flaky and stop working. I don't understand what is causing the error to occur as I cannot make it do the same thing twice.
Here are some screenshots:
Cookie defined in Chrome
Repository Name with my user:
This is the result:
Sometimes it loads more of the files and fails later:
I verified that I logged in under the same user and the cookie name. The system has developer_mode set to true. Is there something we're missing?
Jim Giffin.

Hi Jim, Hi Matthias
we are facing the exact same problem with our project.
Jim, we had the same phenomenon that it worked for 1-2 reloads and then stopped at all.
After looking into it, I figured out, that the browser was using cached files from all resources except from the "inactive" new files, which we could access with the cookie. This made it work, however, when we refreshed again, the browser eventually removed its cache and tried to load inactive versions from files that didn't had any.
We ended up in empty responses (no content, no headers)
We are really looking forward to find some answers here, as it constantly causes trouble to work with multiple developers on the same activated code base.
Any input or suggestions are appreciated.
Best Regards,
Axel

Sometimes notes sustain when they shouldn't. How can I fix this?

When inputting notes either with my midi keyboard or directly with the pencil tool, sometimes the notes sustain even though the note is played or input as a short note. First it happened with the steel guitar exs internal synth sound input with pencil tool, now also it does it sometimes when using the midi keyboard as well. I use an M Audio keyboard, but as a dummy keyboard midied to the Mac, so all sounds are Logic Express sounds. This has only just started happening recently. I thought that it might be a memory problem, but there still appears to be plenty of RAM left.

Look in the headphone hole for lint or other debris. If there is
obstruction, clear it out.
Plug your headphones in and remove them repeatedly.
Reset the iPhone: hold down home button and sleep button
until Apple logo appears - no data will be lost.

How to make pictures not resize when opened in their own window.

I just upgraded to Safari v3 and despite all the good changes I've found one frustrating thing. In the old version when I opened a picture in its own window and it was bigger than what could fit in the window it wouldn't resize. It just came up as a full-resolution image. But with the new version, it does the thing that I hated with internet explorer and resizes it to fit the screen. It's not a big deal but it's enough to bug me.
I've searched the preferences menus and this discussion board, but I still can't find a way to change it back to the old way of not adjusting.
Is it even possible or will I have to get used to it?
Thanks!

http://discussions.apple.com/thread.jspa?messageID=5846081

Renamed menu item not changed when site published.

I changed the name of my site welcome page back to Welcome (it was "Readings"). But when I publish, "Readings" is still the menu name even though I have used ftp to completely deleted all the published files. So somehow iWeb is keeping the old name. How do I get iWeb to smarten up???

I'm not using MobileMe. I'm publishing the site to http://members.shaw.ca/tealeafreading/MandasTea_LeafReading/Welcome.html
I've run through your suggestions, results as follows....!
Erasing the Safari cache generally does not work: changes are not displayed on the published site.
Publishing the entire site to a folder produces the correct content.
Even if I empty the cache and use FTP to delete the server copy of the site ... the changes do not propagate to the server!!!
What seems to work most often is powering down my Mac.

How do I make Firefox not open when I turn on the computer

I need to open firefox manually

You can have whatever page you want to open when opening a new tab, including a blank page, if that is what you choose.
#In the Location bar, type '''''about:config''''' and press Enter.
#*The about:config "This might void your warranty!" warning page may appear. Click I'll be careful, I promise!, to continue to the about:config page.
#Type '''''browser.newtab.url''''' in the search box.
#Double-click the browser.newtab.url preference and change the url from about:newtab to '''''about:blank'''''. Alternately, you can change it to '''''about:home''''' for the Firefox Google home page, or type in your preferred home page, for example google.com.
#Click OK and close the about:config tab.
#See - https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites
Setting the homepage that opens on starting Firefox - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

How do I make Aperture NOT launch when I insert my photo microdrive?

Aperture automatically launches when there is a camera disk mounted, which is annoying. How do I turn this off?

I found the same thing when using a firewire card reader, but it doesn't recognize the card when you use the PC slot on a laptop.

Notes not triggering, notes sustaining when they shouldn't

I'm getting weird MIDI behaviour in Logic (8). It's hooked up via USB. Some notes hold, as if the sustain pedal is on, and other notes don't trigger at all. It's a different region or set of notes every time and I have checked the polarity of the sustain pedal and looked down to see if my foot is stuck to the thing, but no...
Anyone any ideas?

Hi
Could it be the "ghost notes" issue? That being duplicate notes "hiding" underneath the visible notes that sometimes screw up (cancel out) the note ons and/or note offs. A Select All command selects the ghost notes too, so it become difficult to find them.
Track down the notes that are troublesome and then, with the piano roll, select the troublesome notes with a single click, not by rubber banding them to select nor by selecting via clicking the kybd on the left side of the piano roll (both methods will select the ghost notes too), and them delete or transpose them to see if there are these ghost notes (duplicates) in those positions.
I've had this happen to me and so have a few others.
Cheers.
on edit:
Table of MIDI Controller Numbers
http://www.indiana.edu/~emusic/cntrlnumb.html
Message was edited by: Bee Bee

Designer makes items not navigable, when it shouldn't

Similar Messages

Maybe you are looking for