Deskjet100​0J110, windows7Ul​timate Printing extra page with useless info

For each page printed, a page is printed that has lots of information about the # of words, date, template, directory, etc. etc. How do I stop this page from printing? Thanks

Hi,
Teh specific page more likely being printed due to your MS Office configuration.
Follow Microsoft's artice below and check if that helps:
http://support.microsoft.com/kb/890897
Note: the Office 2007 information should also apply for Office 2010 or 2013
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Importing MS Word into PDF adds extra page with document info

    I am still evaluating Acrobat Pro, including Life Cycle Designer to create Forms, currently testing converting existing forms made in MS Word to PDF. There is someting that I do not know how to resolve is when I import files from MS Word, an extra page with details info about the document is copied as well. It contains info such as number of pages, author, date of creation etc....20 lines of info.
    This becomes akward when inserting the document into an existing pdf...or just create a new form from the Word document....adds the extra page ..
    Is there a setup somewhere that I could modify to not have the extra info? or how do I delete it? I try to select the text but cannot (within life cycle)
    Thank you

    If you are importing into Designer, you should ask in that forum. If in Acrobat, then you might try printing the WORD document to a PDF first and importing the PDF. However, with Acrobat you will not get the form fields that you are preserving with Designer.

  • Invoice print extra page w/o any data in repetitive area or end of report

    I did not use Page Footer and reduced those "hidden fielded" height to 26 with checkmark for Adjust Area Height, but the invoice will print extra page with blank repetitive area and page footer, Report Header and Repetitive Header showed.
    How to remove the extra page?  
    I have another one that do not print the extra page but each page has same Invoice Total, Frt, Tax with Remittance Address that should only show in the last page.  I know this is because I put Invoice Total in Page Footer. When I remove Page Footer to End of Report area then I got extra page with no data in repetitive area or end of report.

    Hi Lily,
    i think problem be create in Repetetive Area.
    Do this in your PLD,
    ->> Open your PLD and save as a duplicate PLD (Just testing PLD).
    ->> Right Click in PLD and Choose the Display Hidden Fields in PLD.
    ->> Reduce the Height of all fields in Repetetive Area, Page Header and End of Reports.
    for example,
    ->> Select all fields including Hidden fields in Repetetive Area & Repetetive Area Footer and
    Reduce the Height in General tab on Properties Widnow.
    put the Height -> 15 and Font Size -> 10
    ->> Reduce the Repetetive Area Height and put the Tick mark in Area Height Adjustment in Format Tab.
    Try to remove all fieds(including Hidden fields) in Page Footer and Reduce the Height.
    ex. Page Footer Height -> 0
    Regards,
    Madhan.

  • Pld printing extra pages

    hi
    i seem to have a problem with print layout designer. it seems to be printing extra pages for my clients AR invoice. it does not happen every time though. the client works with data brought into sap through a add on. we also feel that the problem could be due to the invoice not having to print all the child items and just the parent items alone.
    the extra pages are basically blank with all the header and footer information. any idea what this could be? or what i should be looking at to rectify this issue?
    thanks

    Prem,
    It all depends on how your template is setup.  Is you template set up as a Multi Page Invoice template.
    As you have said it could be because of how the data is for the Invoices imported through the Add On.
    What do you exactly mean by "invoice not having to print all the child items and just the parent items alone."
    Please let me know
    Suda

  • Printing extra pages in smartform

    Hi All,
    i'm new to smartforms.i got an issue on invoice(smartforms).i'm getting 3 extra blank pages in smartform.how and where should i rectify that.can any one help me please.
    thanks in advance

    Hi Mr Rao & Mr Reddy,
    thanks for your prompt responses...added to the question, in the extra page i'm getting spool information.actually the program is set in background.once the invoice is issued the form is sent to printer.and in the spool it is displaying the actual pages only.its not showing the extra pages.but once it is out from the printer,i'm getting the extra pages with the spool information
    the information on the extra page is....
    user:
    host:
    class:
    job:
    these are the four lines i'mm getting on the extra page.could u please help me.
    thanks in advance.

  • Okidata printer timeout prints extra page after each job

    After updating to Yosemite, I get the following problem.  When printing to my Okidata C331dn, everything seems fine, but about 25-30 seconds later, I get an extra page printed with the following:
    ERROR:  timeout
    OFFENDING COMMAND:  timeout
    STACK:
    This happens every time I print.  I am using the Mavericks drivers via USB (Oki has not updated their drivers, yet).
    Any ideas on how to stop this?  I am wasting a lot of paper!

    Hi,
    I have had the same problem with an Oki MC560 color NETWORK printer, after upgrading my Macbook to Yosemite.
    Now it seem solved after changing the printer network setting "IEEE802.1X" from "NO" to "YES"
    (I don't know why !).
    Now, after each printing, the printer remain "active" for some minutes, with "Data" led blinking as it should print something else,
    and then it goes in standby (without printing the extra page with timeout error).
    I hope this help you

  • Extra page with: GET /DevMgt/DiscoveryTree.xml

    HP Color Laser Jet CP 2025
    Prints an extra page with the following message:
    "GET /DiscoveryTree.xml HTTP/1.1
    Host: 127.0.0.1.:8080"

    Pamment, to resolve this issue you need to disable the "Printer Status Notifications" in the printer driver settings.
    To do so, assuming you are using Windows 7, the first thing you need to do is go into your control panel.
    Once there, select "view devices and printers" under "hardware and sound".
    Right click your printer and select "properties" or "printer properties". 
    Select the "device settings" tab and there you should see the option to disable "printer status notifications".
    If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos.  I really appreciate it!
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I print web pages with HP psc 2175 printer?

    Hi,
    I'm having difficulty printing web pages with my HP psc 2175 printer. The printer spits out many pages before the actual page I want printed and then at times it doesn't print all of the section desired.
    In fact, when I copied one page the other day, saved it as a pdf file to my computer, opened the file and the document still would not print.
    Anyone have any idea what could be happening?
    Lee

    I have a strange issue - I am also using HP Envy 100 410A and its prints fine from iPad2. But when I try to print from my Gen 1 iPad, it goes thru the motions (shows the printer, allows to select which pages to print, double sided print etc.) but the printing actually doesn't hapen.
    Any suggestions?
    Thanks

  • Printing web page with select tags in IE9 and a .cfm file-only the original selected option prints

    My web page has a select tag and cfselect tags and when I print the page with a different option other than the originally selected option the print for both types of select tags reverts back to the original selection and ignores the new selection.  This happens in IE9 and .cfm files but not when the page is printed in IE8 or IE7 modes (tried in the F12 Developer Tools.)  It also needs to be a .cfm file.  FireFox printed the pages correctly for any combination.
    This was done on a Dell and ThinkCentre computers under Windows 7.  Also, I was able to reproduce the same problem on an different university web site where a selection box would revert back to the original selection for printing on a .cfm page and would print properly on a .PHP page at the same site.
    For my site, I used a print button which calls print() and right clicked and chose print and got the same results no matter which method was used.  I only had the right click method on the third party web site.
    I know this is probably a bit narrow an issue but, any help would be appreciated.

    It appears that it is probably an IE9 bug.
    I simplified the problem by turning the page source taken from the brouser of the original .cfm into an html file and found that it would still print improperly.
    When I eliminated the various parts of the file I found that it would print correctly only when I removed the first line, the "DOC type" line.
    The page will print the newly selected option but then I lose the style sheet.
    If it does not work in an HTML file it must be IE.  It is not the .cfm.  The reason that it did not work for .cfm files, is that they always have a "DOC type" statement.
    I have put the issue into an MSDN forum in addition to the one mentioned previously.

  • I can not print web pages with my HP Deskjet 5440

    I can not print web pages with my HP Deskjet 5440.  I use Vista, no error page, just prints a blank page with headers and footers.  Recently reinstalled printer driver from HP.

    Hello , Welcome to the HP Support Forums!
    I understand that since upgrading your Mac OS X 10.10 computer to Mac OS X 10.10.4 you have been unable to print colour photos wirelessly from your HP Officejet 5740 e-All-in-One Printer. I would like to assist you today with resolving this colour printing issue. To be honest, it does sound like Mac may have loaded the generic Apple Airprint driver on your printer rather then the HP Full Feature Software and Driver package. Should this be the case then you will only have basic print capabilities. Please follow the steps below to confirm that your HP Officejet is utilising the correct driver on your Mac.   
    1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint driver.
      6. Click Add to add the printer to the list.  Once your printer has been installed with the correct HP driver, please test printing a colour photo to confirm that the issue has been resolved. Please respond to this post with the result of your troubleshooting. Should the issue persist there are additional software and driver troubleshooting steps I will have you perform. I look forward to hearing from you!

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • Prints an extra page with message

    Every time I print I get an extra page. I'm only prinitng one doucment and I get a second page with the following message:
    userdict/ESPW1{}bind put
    Can someone help make this stop?

    No the printer does not. I was finally able to solve the problem:
    1. The X driver will not download at all from Minolta's site on the Mac Pro using firefox or safari as its a .gz file.
    http://printer.konicaminolta.com/support/current_printers/pp1250e_sup.htm
    2. Found another link to download from Minolta. Installer would not work - it quit with an error - Minolta site says 10.2 or later - using 10.7.4 so maybe not.
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=987&fil etypeid=5
    3. Found this link instead:
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=macin tosh%201250e
    Needed to download Unstuffit for Mac to open this file as Mac Pro would not uncompress this file.
    4. Needed to manually install the uncompressed text file "PagePro 1250E" (from #3 above) at the following location to make the error go away:
    Library/Printers/PPDs/Contents/Resources/PagePro%201250E

  • Lion address book prints extra page

    For years I had no trouble printing envelopes straight from Address book. But since I upgraded to Lion, when I print an envelope, it prints (1) the envelope just fine, but then also (2) a blank 8.5"x11" page. How do I get it to stop printing the extra page?

    HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
    Solution: Select a #9  envelop.  This prints about the same size and does not have an extra envelope.
    How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
    Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
    On System 7.4 I cannot find a way to change the orientation to verticle as described above.
    I have told Apple.

  • Color Laserjet prints extra pages on startup

    I just bought a CP1518ni color laserjet printer and installed it.  It works fine except that whenever I restart my computer, the printer prints 3 extra pages.  Each has a single B&W line with gibberish printed at the top.  I've tried uninstalling and then reinstalling the printer but the symptoms remain the same.
    I am running Windows XP. 
    Any suggestions would be greatly appreciated.
    Wally

    Hello Galane,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printing extra Pages

    Hi All,
       I have made a PLD for A/R Invoice. The print preview is comming all right but when I am giving for print an extra page is printed.
      Like the preview is showing one page and it is completely ok. Now when I give to print then the first page is printed and the second page is printed with the header part only.
    How to correct this. What can be the cause?
    Regards,
    Raj

    Hi
    Check also in the Layout you are working with: Print Layout Designer -> Display Properties -> Format -> "Preview Printing Layout" box if you have it checked and the value for the box 'Change Size in" is '-1'.
    Paulo Calado
    SAP Business One Forums Team

Maybe you are looking for