Desktop Software Installation causes errors from sleep mode

After I install the desktop software, when my laptop wakes from sleep mode, I get an error message saying "Idle Task Manager" is not working. When I uninstall the software the message goes away.
I'm running Windows 7 64-bit on a lenovo thinkpad. Anyone know how to fix this?

Some suggestions: go to the list of downloads for the T500/W500 series and look at the list of problem fixes for the most recent and prior BIOS updates for your machine (look for the "Summary of Changes" section 2/3rds into the document). If you are still using an older BIOS version and a fix is listed for something like your problem--the descriptions are really minimalistic, so it's not easy to judge--then you might want to consider a BIOS upgrade.
Since a BIOS update affects a truly critical part of your notebook, and a mistake can lead to a totally disabled machine, reading the NOTES section of that document is essential before updating the BIOS: there may be prerequisites to doing it correctly.
Usually just using the ThinkVantage System Update application is the most simple way of doing the update. BIOS updates, if they are available for your particular machine, are listed on the "Optional" tab in the application. It is wise to temporarily disable any active anti-virus or malware scanning software before doing any Lenovo Updates, and especially so before a critical update like the BIOS.
If you use the Intel AMT features, then probably you should also update the firmware/software for that as well, since it ties into the rest of the BIOS. (Again, thoroughly examining the updates' Notes document is essential before proceeding.)
I hope this helps.

Similar Messages

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode, but it has happened while I'm working.

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode (because it spends more time like that), but it has happened while I'm working. It just suddenly quits.

This is a suspicious sign of power supply failure. I would have that checked into. Others who have had similar problems have had the power supplies replaced which fixed the issue.

Can't install Desktop Software properly with out Error 1406

Hello All,
I am running Win 7. Just can't seem to get the desktop software installed witout the Error 1406 coming up. I have tried doing a clean uninstall a few times but still can't get done.
I have no trouble with getting it done in XP on my other compters!
Here's the full Error messege;
Could not write value discription to key \Software\MozillaPlugins\@Rim.com/webSLLauncher,
version =1.0. Verify that you have sufficient access to that key or contact your support personnel.
Solved!
Go to Solution.

Hi there!
I agree...a full start over is in order. And, for your easier reference, here is the procedure that I give out.
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My desktop background disappears after waking from sleep mode

My desktop backgroung disappears after waking from sleep mode. Just converted to Lion.

I spoke with Tech Support this morning. Apparently this is a known issue with Lion. I found it interesting that the rep insisted on saying that "it is the way Lion functions" instead of admitting that it is a GLITCH in the programming. He even said that it happens randomly and not on all computers and not all users experience this. That ought to tell you that it's a glitch. Anyway, there is a "workaround" which is what you do to put a bandage on a persistent wound that should really get surgically stitched:
You either have to log out every time you leave the laptop, or you have to change Energy saver preference to set the display to go to sleep AFTER the computer is set to log out (in Security preferences).
Here is the article that instructs us on applying the bandage::
http://support.apple.com/kb/TS4135?viewlocale=en_US
Suffice it to say that Apple does not plan on stitching this one up any time soon..

T410: BlueScreen error upon waking up from sleep mode

Hi guys,
Bought a T410 earlier this month with an i5 processor, 4GB RAM, 500GB 7200rpm HD, 9-cell, etc etc.
The laptop has been running generally great. I have noticed, however, that sometimes, upon trying to wake up from sleep mode/hibernation (after leaving the laptop dormant for 20 or so minutes), the computer will be turned off completely.
When I hit the power button, I see a screen that says Windows failed to shut down properly. Then, when I reboot, I get the following BlueScreen message:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.256.48
Locale ID:   1033
Additional information about the problem:
BCCode:   9f
BCP1:   0000000000000003
BCP2:   FFFFFA800492AA20
BCP3:   FFFFF80000B9C518
BCP4:   FFFFFA8009DF1010
OS Version:   6_1_7600
Service Pack:   0_0
Product:   256_1
Files that help describe the problem:
C:\Windows\Minidump\062610-28392-01.dmp
C:\Users\Justin\AppData\Local\Temp\WER-47689-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Also, when I reboot, I usually have to reconfigure my wireless configuration to access the internet. Any ideas on what might be causing this problem? Is this a question for Microsoft?
Thanks in advance for your replies.
Best,
Justin

You can forcibly power off by holding down the Power Button for a few seconds.
Try uninstalling most of the ThinkVantage tools and drivers, then use TVSU or manually redriver everything. It is possible some driver was corrupted somehow.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Error in AJAX call when resume from Sleep mode?

We have developed a HTML5 web app and added it to home screen the app is working fine. But the AJAX call is not working when we resume the app from SLEEP MODE. If the app keep opened.
THIS ISSUE COMES ONLY IN iOS8.
Please give the solution for the above issue.
Thanks
Harish S

Sounds like maybe the eject mecinisim is stuck..? Try inserting a CD or DVD and then Eject it to see if that makes a difference.
If not, try reseting both the SMC and PRAM
as per > Resetting the System Management Controller
and > Resetting your Mac's PRAM
Then if it is still acting up, contact Apple or your local AASP
at > Apple - Support - iMac - Service FAQ

Mac Pro will not wake up from sleep mode

Hi,
In my Energy Saver I have my system set to go to sleep after 15 minutes of not being used. Unfortuantely, when I try to wake the system up from sleep mode, it freezes on the screen saver and I have to hard restart the computer to get it to turn on again. I see that this is an issue with MacBook Pros, but I'm not seeing much in the Mac Pro Towers. I did see a thread about Parallels VM causing causing OSX to not wake up from hibernation mode, but I am not always running my VM Ware when the system decides to not wake up. Any help/advice is appreciated.
Thank you,
Julia
OS X Version 10.6.7
2x 2.93 GHz 6-Core Intel Xeon

.... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
most people also move most of their user folder to another hard drive.
sounds like a more normal Mail + OS issue if just that.
hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

Ibook won't wake up or crashes after waking from sleep mode

I have now had this problem for the last year with my new ibook g4 and I can confirm that the problem is present at OS X version 10.3.0 - 10.3.9 and 10.4.0-10.4.5 . I'd manage to solve it but once in a while it shows up again and i have to solve it all over again. Apple doesn't seem to care although it makes your iBook totally unusable if you can't put it to sleep mode, because of the fact that you can't leave your iBook ON while the lid is closed. Ok as I said I have this problem once in a while but I allways manages to solve it, here are my observations:
Leting the computer go into sleep mode by itself (not by closing the lid) will not result in a crash.
Before a crash the following allways occour:
1) The system gets highly unstable. Programs (mostly safari, mail and itunes) will crash without warning. The mouse reacts very slowly and lags behind. The mouse lag is a shure indication that the system will crash during the next seconds or minuts.
2) While set to automaticly connect to favorite network, the airport won't connect imidiatly, but it will take a few seconds more than usual before it connects.
3) The system sometimes crashes before it can activate the backlight resulting in the situation where people think that the system can't wake up from sleep mode and won't react.
Only forcing the computer to sleep mode can cause this failure (by pressing "sleep mode" or by closing the lid).
What i did to rule out some sources resulting in this error:
1) Something like this problem can happen when having a bad memory socket or bad memory, so I'd ran Apples Hardware test and memtest OSX, but no failure was indicated.
2) Ran the usual repair of disk permissions (like 10^6 times ), without any changes.
3) Tried to reset the PMU (Power managing unit), without any changes.
4) Also tried to make a clean installation with panther 10.3 and tiger 10.4, without changes. Before installing anything (no prgrams or updates) the system still crashes. Even after updating to. 10.3.9 and 10.4.5 the problem is still present
The solution:
Well I found out that the problem has to do with to power options. That would normally mean that reseting the PMU would help, but as I already said this didn't change anything. Apparently the system is not able to wake up the Harddisk from sleep mode, and that's basicly the problem. I don't understand why it doesn't crash when going to sleep mode all by itself, but aparently there's something diffrent by forcing the system to sleep mode. Fourthermore it's not so "happy" to change those settings for the harddisk (I will explain later).
Solution:
1) Basicly just UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment. And set "let the computer go to sleep after" to "Never" , do this for Battery and AC Power settings.
2) And put CPU usage to "Automatic", do this for Battery and AC Power settings
3) Restart the ibook. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
Now as I said this problems comes once in a while and that has to do with the fact that repairing my disk permissions can change/reset the above changes. Even if it isn't beeing displayed graphicly repairing the disk permission have reseted those changes, resulting in the fact that the system is crashing again.
So to solve this do the following for Battery and AC power settings:
1) CHECK/MARK the "Set harddisk to sleep mode whenever it's possible" inside powermanagment and put CPU usage option the low or high. And set "let the computer go to sleep after" to "Never"
2) Restart the ibook.
3) UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment". Put CPU usage option back to "Automatic". And set "let the computer go to sleep after" to "Never"
4) Restart the ibook again. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
So now it doesn't crash again.
I've read all the threads of people having this problem and apparently it has been present since OSX 10.0.0 and when calling apple support they tell you to reset PMU and repair the usual disk permissions, which of cause doesn' work. And there are aparently a lot of really angree costumers, because this problem makes the computer COMPLETLY unusable, but apple has done nothing to help those people because of the the fact there there has been released ZERO patches or changes in OSX to resolve this issue. I can't say that there is something wrong with the iBooks as the several hardware test's indicate no malfunctioning but there is some bug in Mac OSX wich specificly makes the system incable to tell some ibook's how to wake the harddisk from sleep mode.
To the fine folks working on this forum: No I will not send this to apple, they already know about this, and have done nothing (just think of the millions of crash reports they recieve from those hundreds of crashes everybody is geting from this problem). That is why I put this on the forum so that people can actually solve this problem by themselves. If you think it's worth sending to apple, so that this problem can finally be fixed after 4-5 years you are more than welcome to send it directly to somebody who will actually do something about this. And i really hope that giving people the opportunity to make ther computer work, doesn't violated the usual rule "that we are not allowed to write anything that is agains apples interests", wich often results in a removal of threads and ANY chance in SOLVING critical errors.
ibook g4 12", 512, 32 VRAM, 1.2 GHz Mac OS X (10.4.5)

sdad sdsdds:
Your observations and solution are right on the money!!
I just was working on an iBook that my father is giving to my sister. I must have started the problem by changing the sleep setting for battery to let HD sleep. After that the fun began! Instability, restart after restart, running Disk Warrior, fixing permissions over and over, etc. I finally zeroed out the HD and installed 10.4. Nothing worked until I read your post.
Thanks a lot. I understand how you feel about posting here, but please be aware that you are helping many people who would be completely without a clue otherwise. Thanks again for your efforts.
Now I can ship my sister her iBook!

T60 Type 2623 Blue Screen on Resume from Sleep Mode problem solved - XP Pro

I hope that this post ends some frustrations for some people.
I hope that IBM deals with this issue by getting ATI to fix the video driver issue.
After three months of tracking down blue screens when resuming from Sleep Mode and some lockups while working, I have identified the problem on my T60 Type 2623 running Windows XP-Pro and all service packs and updates. The Sleep Mode resume issues were intermittant and it would be fine for a day or two and then reboot on Resume or reboot every time I used Resume for a while. For months the Blue Screen would reboot and attempt to send the message to Microsoft using the logs, but the logs were always corrupted. I disabled every driver that I could and the problem continued for months.
The problem solution came about when I decided to try my Rhapsody Music account after many months of not using it. I kept getting a message about DRM (Digital Right Management) being disabled and Rhapsody software could not self-fix this. So I finally called Rhapsody and they spent over an hour with me trying to get Rhapsody to work. The support person asked me about my computer and I noted that it was an IBM T60. He then asked about my Video Card and I responded that it was an ATI Mobility Radeon X1300. After a few minutes on hold he asked about my driver version which was 8.442.3-080103a1-057754C the set from January 31, 2008. He noted that there is a known problem wit the 8.4 driver and it interferes with DRM. He had me go to control panel Settings and Hardware and then roll-back the driver to the prior version.
After a reboot, the DRM issue was solved and I soon discovered that my resume from Sleep mode no longer crashed. In fact it has been fine and crash free for over a month now. I have noted that the older driver can sometimes resize my screen to something like 600 X 800 if I close the lid under certain circumstances, but that is just a function key reset to get my normal desktop resolution back. At least it is not a blue screen reboot with a corrupted log file.
Message Edited by retro74 on 07-05-2008 08:50 AM
Solved!
Go to Solution.

Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
John

Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.

Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
      Kernel Extensions in backtrace:
         com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver          1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.kext.ATIFramebuffer          7.1.2
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.ATIRadeonX2000          7.1.2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.CoreStorageFsck          182.10
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.iokit.AppleYukon2          3.2.2b1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          4.5.0
com.apple.driver.AirPortBrcm43224          500.36.11
com.apple.driver.AppleUSBUHCI          4.4.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.ATI2600Controller          7.1.2
com.apple.kext.ATISupport          7.1.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.CoreStorage          182.10
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOATAPIProtocolTransport          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IO80211Family          411.1
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBFamily          4.5.3
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
Dave

Hi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave

T61 - WWAN does not connect when resuming from sleep mode

Hi.
I have a T61 with integrated WWAN, which works perfectly - except I use sleep mode a lot, and when i resume from sleep mode, WWAN doesn't connect, I always get the same error - IP configuration failed. If I restart my OS, WWAN works normally again.
So far i have tried on Windows XP, Vista 32, Vista 64 and Windows 7 32 bit - always the same!
I connect via Access Connections, maybe there is a known issue?
Thank you, B

This bugs me as well. With the new Verizon software I just installed, it says "Adapter Disabled" when I resume from sleep.
I suspect a driver bug that needs to be adressed.
I use Vista Business 32bit, but had the same problem with XP.
Don Mannino

Can't use mouse/keyboard/trackpad when waking iMac from sleep mode

Basically as the title says. When I wake my iMac from sleep mode I am unable to use my keyboard/trackpad/mouse during the login window. Once the screen goes black by itself, after a minute or so I can then log in properly.
Yes the keyboard/mouse/trackpad are all connected when it wakes from sleep as I can use any of them to wake it from sleep, I just can't move them or type with them in the login window.
Processor 3.4 GHz Intel Core i7
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.8.5 (12F37)

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Don´t wake up from sleep mode

Since few day, my Mac Mini didn´t wake up from sleep mode.
When i click on Mouse or Keyboard, the Mini stay´s at Sleep.
I must shut down the Mini by using the power on/off button.
Also after a few time, the Bluetooth Settings in the Bar Menu getting slower,
it needs a time to pop up the settings windows.
i use 10.8.4.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my computer tell me the "Disk was not properly ejected" when waking from sleep mode?

I am a real "Newbie" to Mac OS. I have a new iMac 21.5" running OS X Lion. When I awake the computer from sleep mode with the spacebar on the keyboard, I get the message "The disk was not ejected proper, etc.". Iss there something I am doing wrong?
Thanks,
Mike G.

I am one of those who had experienced this kind of problem. My former Time Machine disk used to automatically eject itself when my iMac sleeps, hence upon waking up my iMac. i always get the error message that the disk was not properly ejected.
From what I was able to gather from my experience, until the time that I found a workable solution, I think I can say that the problem is most probably caused by the incompatibility of certain external drives with how the iMac operates when on sleep and upon waking up. Some external drives are just not able to cope with how the iMac tries to remount a connected disk after it wakes up from sleep. There are just some external drives that cannot continue to be mounted after the iMac wakes from sleep. There are just some external drives that are not responsive enough. In other words, the existence of the problem lies with the type of external drive you are using.
My former Time Machine disk, the problematic one, was an Imation M300 Apollo 1 TB external disk. It unmounts everytime my iMac went to sleep, but does not remount after waking up the iMac. The disk will continue to be unmounted until I physically remove its USB connector and replug it in the iMac.
I replaced my former Time Machine disk with my current one, a Transcend Storejet 1 TB. And the problem went away. The Transcend disk continue to be mounted after the iMac is woken up even from the longest of sleep. I have even the energy saving option "put the hard disk to sleep..." checked. The Transcend disk comes with a Y cable, i.e. it has two USB connectors, but I only connect the one for both data and power--and it still remains mounted even after waking the iMac from sleep.
The sad realization, however, is that since there are only some external drives that are not able to work with the iMac, no matter how many those some may seem to be, it will be highly unlikely for Apple to itself fix this kind of a problem.
I, therefore, make the following recommendations:
1. Check first if your problematic disk has a firmware upgrade available. In some cases, the firmware upgrade may be enough to make the disk more responsive to the iMac waking up.
2. If there is no firmware upgrade available, check if your power/data USB cable is properly working.
3. If your power/data USB cable is in order, and the problem still persists, I think it is inevitable that you have to replace the problematic disk with a newer one that could respond well with the iMac's wake/sleep operation. With what disk will you replace your problematic one? I can only recommend from my personal experience the Transcend disk I mentioned earlier. You may also search this forum on other brands of disks that may also work.
Regards.

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Desktop Software Installati​on causes errors from sleep mode

Similar Messages

Maybe you are looking for

Desktop Software Installation causes errors from sleep mode