Destination and departure country for 'Delivery in shipment'

Hi,
I have a reporting that requires field from this structure VTRLP (Delivery in Shipment: item)
Therefore, I need to know the source of that this structure is getting from.
Below are the fields that I need:
1) LAND1 - destination country
2) ORT01 - destination city
3) ALAND - departure country
4) VSTEL - shipping point
5) VGBEL - reference order number
6) BRGEW - gross weight
I found that LIPS table contains has VBGEL and BRGEW fields, LIKP has VSTEL. I m not so sure whether I can used it or not.
I have no idea where are the sources for these 3 fields:
1) LAND1 - destination country
2) ORT01 - destination city
3) ALAND - departure country
Appreciate some advice. Thanks.

Hi Ravi,
I found this table VTTS contains most the data that I need but it only has shipping number.
I need for each delivery in the shipment, display shipping point, destination country, destination city, order number, etc.
here is the sample report layout:
Shipment no. 1     Delivery shipping pont 1/ destination 1     order no. 1
                   Delivery shipping pont 2/ destination 2     order no. 2
Shipment no. 2     Delivery shipping pont 3/ destination 3     order no. 3
                   Delivery shipping pont 4/ destination 4     order no. 4
Thanks.

Similar Messages

  • Packing slip and address label for delivery

    Hello all,
    I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
    My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
    and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
    Thanks,
    Maxx

    Hi Max,
    You have to carry out your settings in:
    SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
    1) Maintain Access Sequence
    - you should have a valid access sequence with proper the condition tables
    2) Maintain Outout Types
    - you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
    - you output should be assigned to the proper access sequence
    3) Maintain Output Determination Procedure
    - you should have a valid procedure --> you have to assign your output type to the procedure
    - in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
    4) Assign Ouput Determination Procedure
    - You have to assign the procedure to the delivery type you use
    Master Data
    If your configuration is OK, you can create the output determination condition record in VV21:
    - you have to choose the proper key table
    - you have to define the proper conditions
    - you have to define the printer
    - you have to define number of outputs
    - etc
    SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
    - Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
    - You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
    All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
    Regards,
    Csaba

  • Origin of departure country in delivery document (EIKP-ALAND)

    Hi,
    Like to know the origin of departure country at the header of delivery document (EIKP-ALAND) . Number of foreign trade data (EIKP-EXNUM) gets generated for export deliveries . Is the country of shipping point influences the field EIKP-ALAND.
    Thanks in advance.
    With regards,
    Mrinal

    Hi,
    During the processing of delivery it refers the table TVST- ALAND.
    TVST - table of Organizational Unit: Shipping Points.
    ALAND- Departure country (country from which the goods are sent)
    The major tables for Export Data are:Departure country (country from which the goods are sent)
    Hope this clarifies teh doubt.
    Regards,

  • In Stock Online but not in stock in any stores and not available for Delivery?

    I am having an issue and I can't understand it. Recentally I have been searching everywhere for an affordable copy of "Fire Emblem Radiant Dawn." I come across Bestbuy's online store and there it is pre owned for 29.99$!! I was so excited to finally have found it. The website says that the game is available and in stock so I go to order it. But to my dismay not a single store in South Carolina has the game in stock, and the game is not available for shipping. So I came to the forums first since I am at work, so I want to know is there anyway I can get my hands on this game from Bestbuy? Can I have one branch send it to another or have it delivered to me or am I stuck brooding over the fact that I can't get a hold of this game? I would appreciate the help but this issue has really disapointed me and killed my rush and excitement tonight.

    I took a look at that item on BestBuy.com and it seems that is a Pre-Owned game. Clearly from the name, this game must be previously owned before Best Buy can re-sell the item, so not every single store will have a copy. Unfortunately, if the Store Pickup option isn't showing any inventory in nearby stores, it means that no Pre-Owned copy is available to ship. Online orders pull from the district/territory warehouse(s), so it will be much harder to get a copy of this game than a normal item which is regularly stocked. Perhaps a Forum Moderator can shed more light onto this situation or offer a solution I haven't mentioned. Hope you can get your hands on a copy of this game!!

  • I would like to record and edit content for delivery of ip security cameras

    I have a  client that has implemented ip security cameras that would like the content edited and distributed on demand. Any design and/or technical advice?

    smgchandler,
    Any camcorder that can connect via USB or that can save to an SD card can interface with an iPad if you have the iPad Camera Connection Kit so that you can watch your videos on the new iPad's beautiful retina display.  You can find this on the Apple website or in most big box retail stores.
    http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE

  • Distinguishing between IDocs for Delivery, Shipment and Invoice

    Hi Experts,
    I have a requirement where I am triggering IDocs from SAP for Delivery Document, Shipment and Invoice and sending them to a third-party middleware everytime they are created in SAP, by configuring output types for these documents.
    I want to know if we have any field in these IDocs's Structures that can be used to distinguish between the different documents such that we can identify which document has been received based on this field (or combination of fields)?
    I tried to use Document Category for this purpose, but this field is not available in Invoice and moreover, the IDoc Segment names are different for every IDoc's message type.
    The key point here is that I am not allowed to do any sort of Customization in SAP to achieve this and I can only go about using the Standard Functions inherently available in SAP.
    Please suggest a possible solution for this predicament of mine.
    Thanks in advance.
    Regards,
    Keerthi

    Hello Keerthi
    I do not see where the problem lies.
    We exchange via FTP share  similar documents with one of our logistics partner:
    Inbound delivery (VL33N) => sent as DESADV.DELVRY03 => converted on SAP-XI to TRADACOMS ORDHDR => file suffix .LTI
    Shipping Order (VL03N) => sent as SHPORD.DELVRY03   => converted on SAP-XI to TRADACOMS ORDHDR => file suffix .LTO
    I am not a fan of functional file names yet if the third-party tools is not capable to distinguish between the documents based on their contents at runtime then we need old-fashioned unique file suffixes.
    Of course the two ORDHDR messages can be distinguished based on their contents. The message contains a TYP segment with the following qualifiers:
    TYP/TYP2 = '0430' = (shipping) order (= outbound delivery)
    TYP/TYP2 = '0660' = inbound delivery
    From this logistics partner we receive two different kinds of DLCHDR (delivery confirmation) messages:
    TYP/TYP2 = '0670' = Proof of Delivery for (shipping) order => mapped to STPPOD.DELVRY03
    TYP/TYP2 = '0695' = Goods receipt for inbound delivery    => mapped to WHSCON.DELVRY03
    The files have different suffixes yet they are not evaluated. SAP-XI just picks both messages and evaluates at runtime whether it has to transform the DLCHDR into a STPPOD or WHSCON IDoc.
    Regards
      Uwe

  • How to reverse goods issue for delivery note by using IDoc

    Hi all,
    I would like to reverse goods issue and picking request for delivery note by using inbound IDoc.
    I used message type SHPCON and IDoc type DEVLRY03 for posting goods issue in inbound processing and it's work but I couldn't find solution for posting reverse goods issue.
    Pls let me know which IDoc type or any ways for posting goods issue reversal and cancelling picking request.
    Thanks for your time.
    Su R.

    Hello,
              For this requirements we can actually follow two Approaches that I can think of. Here they are.
    Approach 1
             Little Complex Approach. What we can do is to make use of the Same Function Module (Posting Program) IDOC_INPUT_DELVRY to do the Delivery Updates (Except reversing the Goods Issue). During this,  we can make use of one of the Customer Functions available in the Enhancement V55K0001 and satisfy our Requirement.
    Approach 2
            We can actually code a Custom Posting Program (Function Module) in which the first part will take care of updating the Delivery & if the PGI is done, then we can make use of the Function Module BAPI_GOODSMVT_CANCEL to reverse the PGI.
            I think the later Approach is much easier rather than going for the Standard Function Module (Posting Program), Exits and find a place where we have to find another Enhancement Spot / Enhancement where we can call the above FM to Cancel the Goods Movement.
    Hope these inputs were helpful.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • Material showing in schedule for delivery when complete stock is been issue

    Hi Gurus,
    A Material in stock overview report (MMBE) under
    unrestricted stock showing as 480 qty in one batch and under schedule for
    delivery showing 480 qty in different batch. I checked in stock
    requirement list (MD04) it is showing the open delivery for 480 qty.
    On checking the particular delivery document found
    that the delivery quantity is issued completely for the same batch, which
    is showing in stock overview report (MMBE).
    I am unable to understand, when the delivery qty is
    issued completely, why it is showing under schedule for delivery.
    Because of this it’s not allowing to issue the
    unrestricted stock.
    Thanks in advance.
    With regards
    deepti

    Hi Deepti,
    if i have understand your question correctly then its something like you have unrestricted qty and some open delivery order(no PGI) created.....in this case deepti system is working fine becoz the blocked qty by open delivery order will reflect in unrestriced and thats correct as well....and its not lying...let me explain u by e.g
    say u have unrestricted qty 500kg and open Delivery order created of say 200 KG(no PGI ) done...in this case if u see MMBE then ur unsrestriced qty will be 500 kg only and when u double click on plant u will see 200 kg for scheduled...remember in this case when u try to create new sales order system will allow for max 300kg as 200 is blocked by old order....thats the way system works and it should work..
    Let me know whether this help..and and reward pts and reply back if u get the solution thr this
    Regards
    Jagdish

  • IPhone has to come from Memphis to ny. On time for delivery?

    My receipt says it will be delivered today June 23 by 10:30 AM. It only left Memphis this morning at 2:30. What do you guys think? Will it be here or no?
    Message was edited by: macstr

    I would say no. It would most likely already say it was in NY and soon "out for delivery" to make it to you today let alone this morning.

  • Ordering Calendars for delivery in different countries?  Live in the UK and want to order a calendar for printing/delivery in Canada.  However - can't change the default country -even changed the address in my Apple Account, no result.  Any suggestions?

    Ordering Calendars for delivery in different countries?  Live in the UK and want to order a calendar for printing/delivery in Canada.  However - can't change the default country -even changed the address in my Apple Account, no result.  Any suggestions?

    The general rule is that the shipping address must be in the same country as the billing address of the credit card used to order. However, you can try changing the Print Products store in iPhoto's Advanced preference pane to Canada and try ordering again.
    Happy Holidays

  • Migo and Delivery for Third Party Shipment

    I have configured third party shipment with statistical goods receipt.
    Due to government regulation (Mexico) we need to keep track on our inventory of this movement so I want to configure MIGO so the receipts are done with 101 E - Special Stock and after that a Delivery and Invoice
    If I try to do this I get error MIGO057 - Movement Type 101 E is not planned, I have take a look into OMJJ
    Should I change item line from TAS to TAB? And schedule line from CS to CB? Somebody has done this any tips?
    Thanks in advance,
    Carlos

    Hi,
    Please check in the PO, the account assignment category should be 1, i think it is E and hence creates the error
    Please check the third party account assignment category and change the PO account assignment category and try to do MIGO
    Please do that and revert if you need more details

  • Departure country determination for 3rd party sales order

    Hello,
    We are creating a 3rd party sales order and using dummy plants and dummy shillping point. we do not have plants abroad activated.
    While creating the intercompany billing doc the departure country is not picked up correctly since we have dummy plant and shipping point.
    We want the departure country to be same as suppliers country. and we do not know the supplier details at the point of sales order creation.
    what can we do to get the correct departure country during intercompany billing?
    Regards,
    Shilpa

    You can go through OSS  Note 308989 - Consulting note for cross-company transactions, which provides details on cross-company with 3rd party sales process. Make sure that the delivery plant added in the sales order is assigned to the cross company code.
    Regards,

  • Mwst (Departure country / Destination country or Export Taxes)

    Hi,
    At the moment we have all mwst conditions maintained at Export Taxes.
    Also for EU countries. What can go wrong? Or doesn't it matter where to maintain the tax codes?
    Second question if you do make use of Departure country / Destination country you do not take into account the material and customer tax classifications. What is the idea behind not taken this into account?
    Best regards,
    Eric.
    Anybody?
    Edited by: Eric Van Zundert on Jan 7, 2009 10:11 PM

    Hi,
    For me it is still a little bit unclear.
    I use MWST. The only thing what I do not understand is
    when creating a record with VK11 (MWST) you can insert
    a record on
    1) departurre country and receiving country
    2) export taxes.
    In which business scenario do you choice 1) and when 2)?
    Thank you,
    Eric.

  • Enter a country for partner 4000053932 with type 'Delivery Point'

    Hi Friend,
    I had set up new company code in SAP (R/3) and MySupply
    Also updated comapny code parener in BP t-code
    But i am getting error while creating shopping cart
    Saying that" Enter a country for partner 4000053932 with type 'Delivery Point'  (Item  Set up test )"
    Can any one help on this
    Thanks
    Shrinivas
    Edited by: Shrinivas Siddapur on Mar 6, 2008 3:32 PM

    I am closing the message.
    The issue has been resolved with the help of note:597475

  • Invoice Split due to Tax Departure country and Number of Foreign Trade Data

    Hello Friends,
    With all the search I have done, this question was asked and answered a lot previously, but at the same time most of the previous solutions confuse me or didn't help me to solve the issue.
    My issue is there is a invoice split for a sales order, yes its Order based Billing.
    We had order combinations with two different plants before in the past and had no issues, but this plant is in abroad foreign country.
    So I checked VTFA. ( order - billing copy control )  
    Header:                                                                                                          Item:
    Copy requirment          001   Header/order-related                                 Copying Requiremnets    002   Item / Order related
    Determ.esport data      B                                                                         Data VBRK/VBRP              (Blank)
    Assignment Number     E
    Reference Number       A
    The Billing split analysis shows as:
    Split due to different header Data:
    Fld Name                                          $000000001                                $000000002
    Export indicator                                                                                   Z
    Tax classification 1 for custo              1                                                0
    Number of foreign trade data                                                              0000000667
    Tax Departure Country                       US                                             NL
    Please do offer advice and solutions. Thank you.

    Hi
    First, use SAP Note 11162 - Invoice split criteria in billing document as a checklist. Check it carefully.
    After, subroutine VOFM in Data VBRP/VBRK. Check routine 007 as a template. The idea is populate the field ZURKI (CHAR 40) with a concatenation of strings. Each value is a different invoice. So, if the concatenation is over 40 characters, the do an offsetting of some values. As SAQ MD says, take the help of an ABAPer.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for