Enter a country for partner 4000053932 with type 'Delivery Point'
Hi Friend,
I had set up new company code in SAP (R/3) and MySupply
Also updated comapny code parener in BP t-code
But i am getting error while creating shopping cart
Saying that" Enter a country for partner 4000053932 with type 'Delivery Point' (Item Set up test )"
Can any one help on this
Thanks
Shrinivas
Edited by: Shrinivas Siddapur on Mar 6, 2008 3:32 PM
I am closing the message.
The issue has been resolved with the help of note:597475
Similar Messages
-
Message: Enter a country for partner xyz with type 'requester'
We are using SRM Server 500.
I am customizing a new installation. When I create a SC in classic scenario using "Describe Requirement" I get following messages:
"Enter a country for partner 0000000081 with type requester."
"Enter a country for partner 0000000081 with type goods recipient."
I didn't enter a source of supply, the partner number 0000000081 is a BP that belongs to the user in who creates the SC, as I can see in ppoma_bbp.
All org-units are matched up in TA BBP_BP_OM_INTEGRATE.
In TA BP I checked the address of 0000000081. Everything is ok, country is entered. What I cannot find is Partner type 'Requester' or 'Goods Recipient' in TA BP.
I never had this Problem befor and I customized a few SRM, EBP, BBP, B2B systems. Has anybody an idea?
Thank you for your response.Hi BERTRAND,
one of our users is also facing the same issue when she is trying to cancel one confirmation in srm 7. DO you have any idea how can i check the consistency of the user in SRM7 as BBP_CHECK_USERS are not working in my SRM7 system. -
Enter a country for partner 0000000497 with type 'Proveedor
Hi Masters.
I am working in settup scenario SRM/EBP to SRM/SUS. version 7.0
problem when send XI message into Srm/sus CLIENT The transaction SXMB_MONI in trace show the next message of error
Enter a country for partner 0000000497 with type 'Proveedor' = partner Proveedor
Enter a country for partner 0000001052 with type 'Parte venta' = Partner sales
Thanks.Hi S Neelima . thanks for you hellp, but I review the note 702786 and does not apply for my version srm server
my sp level is SAPKB70107 . I review the code in Include and yes is the correction mentioned into note.
another idea ?
Thank. -
Enter a country for partner 0000002185 with type 'Goods Recipient'
Hi everyone,
We are using SRM 4.0. For a certain user we are facing the error as: "Enter a country for partner 0000002185 with type 'Goods Recipient'".
Kindly help me to resolve this. This error is not occuring for any other user.
Regards,
BhaktiI am closing the message.
The issue has been resolved with the help of note:597475 -
Enter a country for partner with type 'Sold-to Party'
Hi
when we try to send Delivery Scheduld to SUS from R/3 thro
Idoc "DELINS" we are getting the following error on the SRM side
An error occured within an XI interface: Exception
occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to
Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party
I:R5:553 -'Different country' field contents deleted because identical
to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order
7500000062 ) Programm: CX_BBP_BD_ERROR===============CP; Include:
CX_BBP_BD_ERROR===============CM002; Line: 57
we also tried referring the note 987569, we are on SP as follows
SAP_BASIS SAPKB70010
SRM_PLUS 550 SAPKIBK007
SRM_SERVER 550 SAPKIBKT07
regards,
AnandHi
<u>We have faced a similar problem in our previous Implementation.
This is happening in some cases, where the configuartion settingas are not correctly done.</u>
<b>After several tentatives, I managed to solve it activing on the Customizing for Multicompany in one client.
I have accessed to table BBPC_MARKETSET (Status of selection in a market set system) through SM30 and I have just removed the flag "Configure Market Set Procurement".</b>
<u>Also, another option,
check your Enhancements (customer specific) because this is a clear logical error.
The same partner function is added twice, hence it must be deleted programmatically in the enhancement logic.
FYI.. I usually encountered same type of issues in almost every implementation.</u>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
Report for Purchasing Documents with Over Delivery or Under Delivery Tolera
Dear All !
please suggest me a report for Purchasing Documents with Over Delivery or Under Delivery Tolerance limit.
thanks n regards
Naagsekharhi,
Go to ME2N --> Use dynamic selection, choose for hte Puchase doc item --> here select for the over and under delivery and then execute the report..
Hope it helps..
Regards
Priyanka.P -
How can I enter "Flate rates for travel costs" with more than 2 decimals?
Hi expert,
I want to enter flat rates for travel costs in table T706F.
I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
I don't want to change the decimals for this currency.
I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
This seems pretty drastic.
Do you know if there is another way to handle this issue?
Thank you.
Kind regards,
Linda VerdingHello Christian,
I have checked it with consultants from SAP Brussels.
They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
I will create a new currency (EUR3) with the description "for travel expenses only".
Kind regards,
Linda Verding -
Specifying byte stream type for Read File with Type Descriptor
Hi.
I'm trying to write a VI that reads an image file format that can have
different datatypes. What I have so far is that I open the file, read
the header, and get the width, height, number of frames, and datatype.
I calculate number of pixels by nrows*ncols*nframes with no problem,
but I'm not sure how to tell Read File the correct datatype to read
the data into.
I tried using a Case structure where I have a Read File in each case
with the correct type constant as input for that case. The problem is
that the tunnel graduates the datatype to the highest representation.
I found in Application Note 154 the discussion about Type Descriptors.
Is there a way to generate a Type Descriptor and output it from a C
ase
structure? I tried just returning the value (e.g. 0x0402 for a Word),
but Read File will just see that the byte stream type is a uint32.
Is there any other way to do this?
Thanks for any help.I converted the code to LabVIEW 6.1 for you and attached it below.
Don't worry about being a newbie. We all start there. Keep asking this type of question and you won't stay there long.
As you are discovering, being strictly typed means that you must rewrite code even for a simple data type change, or convert everything to the same data type first. For image data, conversion can result in a lot of extra space being wasted. Use a modified version of the GLV_WaveformBuffer.vi to hold your data. Use the array functions, which operate inline, to add to and delete the data wires in the buffer. This allows you to save several different data types. You will need several different inputs and outputs to handle these data types. I ha
ve also attached a similar file created for exactly the problem you have - storing arrays of different data types (data from NI-SCOPE devices, in this case - can be float, I8, I16, or I32).
Routines that take any type work in one of two ways. LabVIEW primitives, such as plus and minus operators, work by figuring out the type and doing the right thing in the C code layer of the LabVIEW environment. Users of LabVIEW can't do this. Users can make polymorphic VIs. Polymorphic VIs are actually a single VI for every data type that are referenced by a "wrapper", the polymorphic VI. Users still need to write a different VI for every data type they need.
Take home message - if you need to work with different data types, you will need to rewrite your code for every data type or convert your data to a common data type. Polymorphic VIs and case statements are your friend.
Let me know if you need more help.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
GigaLabVIEW61.zip 362 KB
sfpScpChan_Waveform_Buffer.zip 74 KB -
Emulation for partner link with async operation and no callback client
In our Composite, we are calling a partner link with operation 'XYZAsync'. It is called in async mode and there is no callback client attached to this call. Hence, it is not possible to create emulation for it ( Create new emulate option is unavailable for the particular operation).
We are facing the following issues:
1. Jdev is unable to generate the sample XML.
2. When we tried to add emulation, the "+ icon" is not high lighted.Hi again,
i managed to solve the problem:) Totally stupid.. the process variable name was not specified correctly..., but more stupid sounds the error message:))))
Best Regards,
Evanela -
Problem with an enter inventory count for a material with serial number
Hi all,
I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
Are there any alternatives to post the inventory document?
Thanks.
Best regards,
Gaetanoyou can't but uplaod using LSMW rather entering manually otherwise you need coremod
-
Where to enter the base for skf and act type
Dear Forum,
1 where can i define the total number of employee for each cost center? i cannot enter in KK01 as in KK01 i only can define the measurement which is number of employee.
2 where can i define the number of hour spent? cannot be in KL01 as in KL01 only define the measurement which is hour only.
thankshi,
1. for SKF its KP46
2. for activity types it can be eitheir in the KP26 or in the cost object incase if its related to product costing.
hope this helps.
regards
sayeed -
GR for a STO with SD delivery and Batches with split valuation X
Hello,
We have a problem with the Goods Receipts for Stock Transfer Orders between plants for materials subject to batch split and split valuation with valuation type X.
The scenario is very similar to the one explained on this thread: STO:problem with batch valuated material
When creating the the STO, it automatically sets a valuation type that is not be the appropriate one, we cannot use only one valuation type per position because we can use more than one batch (and valuation type). The outbound delivery has the correct valuation types for each batch and material but when doing the GR at the receiving plant, it only takes into account the valuation type indicated in the STO with no chance to change it.
I have seen the Note 212532 but we are not working with active ingredients.
Does anybody know a useful EP to use?
Thanks in advance for your help.
Regards,
Javier.Well, we can change the valuation type before Posting the goods issue of the delivery, but in most cases we need more than one batch (each batch has a different valuation type) for each item (material) in the purchase order.
We can do this at delivery level but the GR only takes into account the valuation type of the purchase order.
Thanks. -
Shipment document creation for normal purchases(With out delivery)
Dear Friednds,
I Have one scanario in my project, which is belongs to transportation module:
The client will raise the PO to vendor. The vendor will delivery the goods to my client.
But client will do the MIGO. thst is goods receipt.
Thats all, no inbound delivery. Now i want to capture that shipment costs in SAP.
How to do that.
I have few more scenarios like this:
1. Goods movements from transportation location to plants; How to captire the ship.cots with out shipment document.
2. Goods movements from one Storage lo9cation to another storage location.
At present,the client just raising the service PO to Forwarding agent. Now we need to capture those shipment and ship.cost docuemnts in SAP.
Please any body let it solve.
With regards
LakkiHi Lakki,
These are the User Exits available in the shipment cost calculation please try with these,
V54B0001 Shipment costing: Configure pricing
V54B0003 Shipment Costs Calculation: Determine Rate Type and Cur
V54B0004 Shipment Cost Calculation: Determine Status
V54C0001 Shipment costing: Description(s) shipement cost item(s)
V54C0002 Shipment costing: Create shipment cost sub-items
V54C0003 Shipment Costs Processing: Determine Invoicing Party
V54C0004 Shipment Costs Processing: Determine Loc. for Tax Invoi
V54D0001 Shipment Costing: Determining the Tax Countries
V54KSFRC Determining the factors for apportionment of shipment c
V54P0001 Extended Function Codes for Shipment Cost Information
V54U0001 Shipment cost processing: Check whether changes made
V54U0002 Check shipment costs for completion
V54U0003 Specification of shipment cost number
V54U0004 Formatting for update of new objects (shipment costs)
V54U0005 Updating new objects in shipment cost processing
V54U0006 Shipment Purchase Order - Header Data Supply
V54U0007 Shipment Purchase Order - Item Data Supply
I hope it will help you
Regards,
Murali. -
ERS for Return Items with Planned Delivery Costs also as credit
Hi
I have the requirement to process ERS-Returns (MRRL) where I need to have a credit memo for the product cost and the planned delivery costs incurred with the original order. ($15,000 for product and $1200 for delivery costs = Credit Memo for $16,200) I have tested this extensively but in all situations the planned delivery costs creates an 'invoice' not a credit memo.
Has anybody encountered this requirement? If so, were you able to resolve without implementing an enhancement?
Thanks.For delivery costs you need to maintain the following customizing:
> OLMR
> Evaluated Receipt Settlement (ERS)
> Specify Automatic Settlement of Planned Delivery Costs
The flag controls whether to include or exclude planned delivery costs
from automatic settlement.
Regarding the planned delivery cost, it will not listed in
transaction MRRL. This is the standard SAP design. Instead, please
use transaction MRDC. -
For what is the field SVER with type RSRSVER in structure RSDRI_S_SELNODE ?
Does anyone know what does the field SVER with type RSRSVER in structure RSDRI_S_SELNODE mean ??
Thx....If this indicator is set, the material is costed using costing with a quantity structure (BOM and routing).
The system searches for any existing cost estimates with quantity structure for the individual materials; it ignores existing cost estimates without quantity structure. If the system does not find any valid costing data for the materials, it costs the material or accesses the price in the material master.
If this indicator is not set, the planned costs for the material are calculated using the cost estimate without quantity structure. In this case, you use unit costing to create the quantity structure manually by entering costing items for materials and activity types, for example.
The system now searches for any existing cost estimates without quantity structure. If a cost estimate without quantity structure exists for a material, the results of this cost estimate are included in a cost estimate with quantity structure. If there is no cost estimate without quantity structure, the cost estimate with quantity structure accesses the price in the material master record. The planned costs for this material then go into the cost estimate with quantity structure as raw material costs.
This does not apply if the indicator Ignore prod cost est w/o qty structure is set in the costing variant.
Maybe you are looking for
-
Such a farse. I used to have a high opinion of BT'...
We moved house on the 28th. The day of the move, as to be expected the phone and internet was cancelled at the old house and we moved to the new house that same day. Same homehub and everything, even the same type of phone socket that has a dedicated
-
Windows Vista - issues with a large sync
I'm having an issue getting my iPod 80GB classic to sync with my PC. I have been trying to figure this out for a few weeks with no luck. Any input or ideas for a resolution would be great! Issue: I am unable to do a large sync (5000+ songs) to my iPo
-
IPhoto crashes when opening partially completed book
Using iPhoto 5.0.4 with Tiger 10.4.3 OS on a 1 GHz PowerPC G4 laptop with 768 MB of memory. I created a book in iPhoto using the Yearbook Theme. I have 266 pictures either in the book or waiting to be placed. At least 230 pictures are on pages. There
-
I have a USB drive that doesn't want to eject. It get the error that it is in use and can't be ejected. Yet, nothing is using it. I'm trying to eject through Finder. Any ideas how to resolve this?
-
Avoid duplicates in detail-block
I have a master-detail form, the detail block have item, qty & rate. only 1 item_code is allowed to b entered per invoice, purchased at different rates. what i want to acheive is; 1) prevent user from entering duplicate item-code, if the detail recor