Detail data in relational, summary in OLAP?

Hi, I've had a lot of practice now with the new AW wizards (version 10.1.0.3) and loading from a relational star schema. However, what I really want to do is build an AW that only has the "summary" levels, and have queries against the AW drill down into the RDBMS for the detailed level transactions.
This used to be possible using RAA / RAM - is it still possible now? If so, how would I do this?
Thanks,
Scott

Scott,
Two ways in which I would approach this.
If you've got Oracle 10g, you could use the new query equivalence feature (http://www.dbazine.com/rittman2.shtml) to map a relational select statement that uses a GROUP BY clause to a summary within an analytic workspace. See the article for an illustrative example at the end.
The other approach would be for your query to go directly against the analytic workspace, which would retrieve data directly from data in variables for summary level data, but would use a formula to retrieve relational, detail level data from Oracle tables when lower-level data is required. In other words, you'd "reach through" to the relational tables as required to get hold of detail level data.
Just a couple of thoughts. Option 1 is more (from a personal point of view) purely theoretical at the moment, though it should be possible. Option 2 (storing detail level in an AW or Express variable, and retrieving detail level data via SQL "on the fly") is well used in several projects we've worked on.
hope this helps
Mark
p.s. of course at some point in the future, no doubt the Oracle RDBMS will handle this automatically, as this is I suppose one of the key drivers for having ROLAP and MOLAP storage available as options with the OLAP Option.

Similar Messages

Regarding detail data coming in a grid in a PO Report

Hi
I have a requirement where in the detail data need to be printed in a grid. I have placed this in the jfmain page and all the subforms in the next page.
when i run the report for multiple purchase order numbers the grid is not coming from the second Purchase order number but the data is coming correctly.
I am using ^eject for page break after each PO related data.
Can any one help me in this regard.
TIA
vijay
[email protected]

Hi abilash n
as in dictionary, all quantity fields should have a reference to the unit field which then defines the number of decimals.
The rest is done automatically as long as you do it standard way. In field catalog you have to set the fcat-qfieldname to the name of the field that has the unit.
If you do so, also totals will be grouped by unit.
SAP has really done a great thing by inventing units for quantities (and currency keys for currency amounts). Only developers do not understand and thus refuse to use it.
Regards,
Clemens

GRC 10 - Legacy connector as user detail data source

Hello,
I'm trying to use a legacy connector (with a text file as input) as a user data-source.
Repository user sync for this legacy connector works : checked GRACUSER table, it is populated with all the user details from the input file (id,firstname,lastname,mail,department,phone
I got it working for user search data source : when creating an access request for "other" user, searching for a user ID/name works : data are displayed in search result, however when I select the user from the serach result the user details are not populated in an access-request form.
Any clue about this ? Any one already got this working ?
GRC 10.0 SP13.
Checked SP14 and SP15 release notes, and found no relevant notes yet.
repository-related notes applied :
-1864423
-1950231
Regards,
Emmanuel.

Hi Pedro,
You only have confirmed that 2 accounts are maintained in HCM and in SU01 as well, so you would be able to see these accounts' details both ways.
Yes, you are right about user account maintenance first in HCM at the time of new hire, then you can manually raise the access request to grant them access to various SAP systems. Or in order to automate this process as Prasahant suggested, you can take help from HR Triggers.
You can refer: GRC 10.0 - HR Trigger configuration - Governance, Risk and Compliance - SCN Wiki
But responding to your original discussion, whatever user accounts are maintained in HCM you would see those details provided you define HR for the "user search data source" AND from SU01 for "user detail data source"
In your case you have 2 accounts which have been maintained in HCM as well as SU01, so that is what creating confusion for you.
Let us know if you need any more clarifications.
Regards,
Ameet

User Details Data Source

Hello all,
I´m working to configure the user search data source and also user details data source from our GRC AC environment. Bellow my doubt:
Can I configure GRC AC to automatically fill the Manager field in the access request screen? Obviously the User Details Data Source must be configured. Is it possible using SU01? HR? LDAP? All of them? Some examples would be really appreciated.
In other words:
When an Access Request is made, I want all User Details filled automatically, including the Manager.
Regards,
SAP Legend

Hi,
Yes you can configure the manager look up functionality by configuring the detail data source in the IMG and make sure you do all the configurations respective to what data source you are using.
If you are using LDAP then make sure you have done the mapping for your AC field name and target system field name and all the LDAP related configurations.
If you are using HR system as the data source please check the below link.
Configure Manager Look-Up in ARM for GRC 10
Regards,
Neeraj

Unable to view the details data in "Employee Self-Service 4.0" of HRMS

Unable to view the detail data in "Summary of Absences" when click the "Leave of Absence " button in "Employee Self-Service 4.0",
the whole login path is : "Employee Self-Service 4.0" ===> "Leave of Absence "
It shoud be seen the "Summary of Absences " ,bacause there are data in the datebase ,but when I click in it shows "No data exists."

Dear user11977612 :
Thank you for your answer, I have been check the profile :HR: Self Service HR Licensed, It had set YES. Thank you! But it still no records
Dear Naveen:
The page can open with IE7 and it just can not be shown the detail records (llike in "Absence Type" the detail ===>Advance Leave ) in the IE page.
Regards,
Edited by: user11975899 on 2009/10/13 下午 7:17

Start schema in relational database vs OLAP

I understand what OLAP and MOLAP are and their purpose in theory. Under what scenarios would one consider switching from start schemas in relational database to OLAP technology and building cubes? I understand this is more frequent in financial departments. Can one expand more about the usage? I understand it improves performance, but you can get pretty good performance by having star schemas in relational databses right?
And to move to OLAP technology, can you elaborate how it would be? Would I still populate the star schemas in relational databases and create cubes from there? Do you use an ETL tool for this?
If I have OLAP technology in our financial department, would I build a data warehouse in the same server?

Yes the tables are automatically created and populated at the point of configuration.
Cheers
John
http://john-goodwin.blogspot.com/

Regrouping detail information to get summary result

Hi gurus, I'd like to know if and how the following can be achieve. I have a data template that generates details information for a project. I use this information on the detail template but now I wan't to create a summary section that would use the same data template but would regroup data differently. I would like to summarize some amount based on another hierarchy that it is used in the xml data template.
Actually, the following structure is used to display organization/project/tasks/category/resource info
<LIST_G_ORGANIZATION>
<G_ORGANIZATION>
<ORG_NAME>AAAA</ORG_NAME>
<LIST_G_PROJECT_INFOS>
<G_PROJECT_INFOS>
<PROJ_NUMBER>1234</PROJ_NUMBER>
<PROJ_NAME>CTAB</PROJ_NAME>
<LIST_G_TASKS>
<G_TASKS>
<TASK_NUMBER>1</TASK_NUMBER>
<TASK_NAME>A</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L1</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT1</RESOURCE_NAME>
<ACTUAL_COST_AMT>10</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>20</ACCRUAL_COST_AMT>
</G_RES>
<G_TASKS>
<TASK_NUMBER>2</TASK_NUMBER>
<TASK_NAME>B</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L2</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT2</RESOURCE_NAME>
<ACTUAL_COST_AMT>30</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>40</ACCRUAL_COST_AMT>
</G_RES>
<PROJ_NUMBER>456</PROJ_NUMBER>
<PROJ_NAME>CTQC</PROJ_NAME>
<LIST_G_TASKS>
<G_TASKS>
<TASK_NUMBER>1</TASK_NUMBER>
<TASK_NAME>A</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L1</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT1</RESOURCE_NAME>
<ACTUAL_COST_AMT>15</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>25</ACCRUAL_COST_AMT>
</G_RES>
<G_TASKS>
<TASK_NUMBER>2</TASK_NUMBER>
<TASK_NAME>B</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L2</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT2</RESOURCE_NAME>
<ACTUAL_COST_AMT>35</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>45</ACCRUAL_COST_AMT>
</G_RES>
So in detail section, it is shown based on the hierarchy organization (AAA) - Project (1234, 456) - Tasks - Category - Resources.
In the summary section, I'd like to remove the "Project" level and summarize all the amount under resources for the organization, meaning that I'd like to know the sum(actual_cost_amt), sum(accurual_cost_amt) for the entire organization and not for a specific project.
1 - Is it possible to accomplish that with the detail data template ? Is so, I can I sum these amounts and regroup information and skip project notion ?
or
I've to create another query in the data template to get what I want.
Thanks a lot.

I managed to have the solution. Using a for-each-group like below. It regroup all the resource name under any projects.
<?for-each-group://G_PROJECT_INFOS//G_TASKS//G_CAT//G_RES;./RESOURCE_NAME?>

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

(ID 30101 Details: Data error (cyclic redundancy check) (0x80070017)) _More information

Hi,
Can anyone please help with this? Our Tape Drive died and we got a new one from our Maintenance Company. Since then large backups to tape are failing. When the jobs are small they seem to go through OK but when the job is greater than around
200GB then it fails with the error below.
I tried updating the tape drive driver but Windows said that the drive wasn't functioning properly any more.
The only difference between the old faulty drive and the new drive is the firmware. We used to have A422 in the old drive. The new drive has D8D5. Can someone please help as it's driving me crazy.
"Affected area:
IBM TotalStorage 3573 Tape Library
Occurred since: 03/03/2015 10:19:37
Description: Library drive IBM ULTRIUM 5 HH 3580 TAPE DRIVE (1068006186) in IBM TotalStorage 3573 Tape Library is not functioning and library jobs may fail until the drive is repaired.
The drive is not functioning for the following reason:
(ID 3303)
DPM encountered a critical error while performing an I/O operation on the tape Physical Servers-LT-MonthlyBackup-00000235 (000086L4) (Barcode - 000086L4) in Drive IBM ULTRIUM 5 HH 3580 TAPE DRIVE (1068006186).
(ID 30101 Details: Data error (cyclic redundancy check) (0x80070017))
More information
Recommended action:
Retry the operation. If the problem persists, contact your hardware vendor.
No action required
Resolution: To dismiss the alert, click below
Inactivate"
Regards
Willie

Hi,
It sounds like another faulty drive - You can try to reproduce the problem outside of DPM using some external utilities.   If you get an error before the tape fills you can use net helpmsg errorcode to see what the error was.
Download the DPMerasetape.zip file from the following link and extract to c:\temp folder.
https://onedrive.live.com/?cid=b03306b628ab886f&id=B03306B628AB886F%21524&sc=documents
The utilities are not that user friendly, but here are the basics.
Always Stop DPMLA Service prior to running MCT.EXE Commands.
NET STOP DPMLA
C:\> mct-x64.exe -p
Opening changer \\.\Changer0
     ********** Changer Parameters **********
         Number of Transport Elements : 1
         Number of Storage Elements : 50
         Number of Cleaner Slots : 0
         Number of of IE Elements : 0
         Number of NumberDataTransferElements : 6
         Number of Doors : 0
         First Slot Number : 0
         First Drive Number : 0
         First Transport Number : 0
         First IEPort number : 0
         First Cleaner Slot Address : 0
         Magazine Size : 0
         Drive Clean Timeout : 600
Flags set for the changer :
         CHANGER_BAR_CODE_SCANNER_INSTALLED
         CHANGER_POSITION_TO_ELEMENT
         CHANGER_STORAGE_DRIVE
         CHANGER_STORAGE_SLOT
         CHANGER_DRIVE_CLEANING_REQUIRED
         CHANGER_VOLUME_IDENTIFICATION
         CHANGER_VOLUME_SEARCH
         CHANGER_SERIAL_NUMBER_VALID
Changer can move from Slot to :
                 Slot
                 Drive
Changer can move from Drive to :
                 Slot
                 Drive
Changer is Capable of positioning transport to Slot.
Changer is Capable of positioning transport to Drive.
C:\> mct-x64.exe -d
Opening changer \\.\Changer0
Product Data for Medium Changer device :
Vendor Id    : STK
Product Id   : L180
Revision     : 030
SerialNumber : 3077520000
For MCT utility we have the -m [MOVE] command to move media around inside the library.
-m [ElemType-T] Transport# [ElemType-Source] S_lot#/D_rive# [ElemType-Destination] S_lot#/D_rive#
Get / view command syntax for –m (move) command for changer 0
C:\>mct-x64 0 -m
Opening changer \\.\Changer0
MoveMedium : mct -m t N s\d N s\d N   [Where s/d means Slot or Drive and N is ZERO based].
Some Examples:
mct-x64 -m t 0 s 0 d 0    (Using transport-0, move media from slot-0 to drive-0)
mct-x64 -m t 0 d 0 s 0    (Using transport-0, move media from drive-0 to slot-0)
mct-x64 -m t 0 s 0 s 100 (Using transport-0, move media from slot-0 to slot-100)
mct-x64 -m t 0 d 0 d 1    (Using transport-0, move media from drive-0 to drive-1)
mct-x64 -m t 0 s 0 ie 0   (Using transport-0, move media from slot-0 to IEPort 0)
Once you move a tape into a drive, use mytape commands Loadtape, taperewind, locktape, Disable hardware compression, Set block size to 65536 (64K), writeforspanning.
You need the symbolic name for the tape drive you loaded media into - look in the DPM console by clicking the tape drive and look at the details for
\\.\tape########. use that in the following command.
Mytape.exe \\.\Tape2147483638
Status: Getting the handle for \\.\Tape2147483638...Success
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
TapeConsole_1.0>setdriveinfo">\\.\Tape2147483638>TapeConsole_1.0>setdriveinfo
Hardware error correction [y]-Enable / [n] Disable : y
Hardware data compression [y]-Enable / [n] Disable : N   (BE SURE TO DISABLE)
Data padding [y]-Enable / [n] Disable : n
Setmark reporting   [y]-Enable / [n] Disable : n
Number of bytes between the end-of-tape warning and the physical end of the tape: 0
Status: Setting Drive Information...Success
TapeConsole_1.0>writeforspanning">\\.\Tape2147483638>TapeConsole_1.0>writeforspanning
Status: Writing onto tape...Failed !!!
Error_ID reported: 1100                 (net helpmsg 1100
= The physical end of the tape has been reached.
Number of bytes written: 983040     (Ignore bytes written, we'll get physical tape position later)
Giving up
Time taken: 15788ms
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
REPEAT
TapeConsole_1.0>erasetape">\\.\Tape2147483638>TapeConsole_1.0>erasetape s
Short erase / Long Erase [s/l]:Status: Erasing the tape...Success
\\.\Tape2147483646...Success
c:\>mct-x64.exe -m t 0 d 0 s 0
Opening changer \\.\Changer0
Source is a Drive
Destination is a Slot
Move : Transport - 0, Src - 0, Dest - 0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Encrypt/decrypt bank details data in vendor master record

Hello all,
I need to be able to encrypt bank details data (i.e. bank key and account) in vendor master record before saving it to the database and subsequently decrypt this data when the payment program RFFOUS_T generates a file in ACH format to be sent to the bank for processing.
If anyone could point me in the right direction (i.e. link to SAP documentation or other resource), I'd really appreciate it.
Thank you,
Gene.

Hi Pablo,
Sorry it took me so long to reply, but I was out of town for a few weeks.
I considered using an AUTHORITY_CHECK, but it'd only work if someone used a transaction code to view vendor master data (i.e. FK03, XK03, etc). A custom report can easily be written, which will bypass an AUTH check and display all bank data.
Thank you,
Gene.

Adf master -detail data table

Hi,
I have adf master detail data table , I put af:selectbooelancheckbox and autosubmit is true in detail data table .When I click the detail table , valuechangelistener of the af:selectbooelancheckbox is runnig I don't want this situation. Is it possible to prevent this ?
regards,

Hi
I can't remove autosutmit = true because I handle the valuechangeevent in managedbean.Why master table event fire the valuechangeevent in detail table ? I check the submit source in managedbean but It doesn't prevent to fire valuchangeevent ? Is there any way except ignore autosubmit = true ?
thx,

Regarding data type related to roman no

hi ,
i have created a z table named as zstudent. In that i hve one field name as zstandard which should contain only roman numbers from I TO X (1ST TO 10 TH ) class .hw can i do this .wen i creating entries on that table it should restrict to only roman numbers.is there any data type related to roman numbers
thanks in advance
Nandini.p
points will be rewarded if useful.

Why don't you simply maintain a regular integer or even a numeric value in your internal table and then output the appropriate Roman numeral using CASE...ENDCASE when you need to use it?
Or if you don't have that many, then create a series of constants and use those.
Regards
Kurt

Details Data in SAP BI could not be updated completely: see log

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

How to add data in related issue field in issue tracking list sharepoint 2013

Hi,
I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

Detail data in relational, summary in OLAP?

Similar Messages

Maybe you are looking for