Will a Built-in Modem pulled from a Dual 867mhz work in my DP 500 Mhz Mac

Will a Built-in Modem pulled from a Dual 867mhz work in my DP 500 Mhz (Gigabyte Etherent) Mac?
The info on the modem is:
UO1MO85.00
The connectors are compatible, but I wasn't sure if the modem itself was.
I'm looking to start faxing with my computer which is why I need a modem.
thanks,
Hairfarmer

Hi
Unfortunately I think they may be right. For my internal modem the Apple System Profiler lists a number of regions including the UK. This seems to imply they're region specific and a modem from the US is unlikely to work. I expect the actual hardware is the same, but the firmware contained in the ROM on the modem card is different.
Apple sell an external USB modem for around £35 on the UK on-line Apple Store. It's primarily intended for Mac Minis which no longer ship with an internal modem, although it may work on other computers with the appropriate OS version number.

Similar Messages

Will an unlocked iPhone 6 bought from the Apple website work in India on Indian carriers?

Hey,
I'm thinking of buying an unlocked iPhone 6 from the Apple website. On the website it states that it will work on any of the carriers in the United States. Since it does not mention the possibility of its use in India, I wanted to confirm if it would be usable on an Indian Carrier with all the services enabled.

It will work provided you are on a supported iPhone carrier. In order to purchase it, you must have a billing and shipping address in the US.
You may not get 4G/LTE service outside the US.
You will not get any warranty or post-warranty support for the phone. You must return to the US or send the phone to a friend/relative in the US and have them bring it in.
~Lyssa

Will a Microsoft Office Add-In developed in Visual Studio work for both a Windows and Mac ( osx ) versions of Ms Office?

I want to develop a Microsoft Office Word Add-In for Mac Users. I would like to know if we create it using Visual Studios in windows will it be compatible with the Mac version of office or is there a whole another way to develop for Mac?
Please provide links so that I could follow some guidelines. The http://msdn.microsoft.com/site
doesn't exactly speak of the platform compatibility of the Add-In.
Thank You very Much in Advance.

Office:Mac 2011 only supports add-ins that were developed in VBA. Office:Mac 2008 does not support add-ins at all. A
new version of Office:Mac is slated for release in 2015, there have been no announcements as of this writing (December 2014) whether Microsoft will support additional methods of developing add-ins in the new version of Office:Mac.
For further information, check out
Getting Started with VBA in Office for Mac 2011 from the Office:Mac 2011 help files. You might find more assistance in developing Office:Mac add-ins in the
Office:Mac help forums hosted by Microsoft.

RAW import from Lumix FZ1000 not working in new Photo app for Mac

I am not able to import from my Panasonic Lumix FZ1000 the RAW pictures into the new Photo Mac app. They are even not shown when inserting the SD card into my MBP.
I am only able to get the JPEG ones.
FZ1000 RAW is supported according Apple and was working with previous app.
Any idea?

I am able to import them, but I cannot edit them as RAW files. They behave like .jpegs. So correcting exposure for example is a horrible experience. My 5D Mark II files behave as they did in Aperture, so it is the FZ1000 RAWs in particular that are problematic.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

If I update to 7.1 will this delete apps that were pulled from the app store? (Flappy Bird)

I'm wondering when the time comes to update to 7.1, will this delete apps that were pulled from the app store (in this instance, Flappy Bird)
Thanks so much.

You should always have a recent back up of your phone. If you have a copy of the app on your computer, you can always restore it to the device.

Is there a way to use dynamic built string in the "from" clause

Hi all, im having one problem and now, im not sure how to solve it easily at all... :) Is there someone that would be so kind and put a eye on it? ..thx
I have plsql proc, in which i have a list of table_names. For each of that table i need to run a query that will retrieve me a list of values and for each of that value i need to do something.
If i can be more specific about the problem -> each of that table is built as key_column, value_columns, day,starttime. For a key per table there are 4 records per hour - every quarter. Im truncating those quarters to full-quarter (minutes => 0->14 = 0min; 15->29 = 15min, 30->44 = 30, 45->59=45)
example
i get for one key and specific hour four records at 15:01;15:16;15:31;15:46 => i truncate em to 15:00;15:15;15:30;15:45..Sometimes there is a problem with the tool that is generating those data for me, and one quarter could be moved a little - so i get data like 15:01;15:16;15:29;15:46 => after i truncate the times i get duplicates in second quarter. It also can happen like this : 23:00; 23:14; 23:29; 23:44; 23:59 => totaly bad => cos the last one supposed to be as 0:00 next day, ..and 23:14 as 23:15...So...that was a problem - and solution -> i wanted to create plsql that will find those hours in each table i ve defined, and for each problem hour i make some fixes - update the bad time ...
..and i have problem - can i put an dynamic built table_name in the "from" clause?
example how i wanted to do that:
declare
     type t_objectName     is table of varchar2(030) index     by pls_integer;
     l_tableName              t_objectName;
begin
l_tableName(1) := 'tmphlrgl';
l_tableName(2) := 'tmprcfgl';
l_tableName(3) := 'tmprcfbs';
l_tableName(4) := 'tmpvlrgl';
for i in (select evtime from (select day,trunc_quarter(evtime) evtime,m_id from l_tableName(i) group by day,trunc_quarter(evtime),m_id having count(*)>1) order by evtime) loop
--some other conditions and the update...
end loop;
end;
/I cannot use the l_tableName(i) for FROM ...get an error...I was thinking to build it as dynamic sql and execute immediate into some kind of object that can store mutliple lines, from which i would in the FOR cycle get the data...But im not sure if this could be done in plsql...
thanks for your time and help..
d.

declare
c sys_refcursor;
begin
for i in 1..4 loop
open c for 'day,trunc_quarter(evtime) evtime,m_id
from ' || l_tableName(i) ||
'group by day,trunc_quarter(evtime),m_id having
count(*)>1) order by evtime';Just to high light SELECT is missing that all
OPEN c FOR ' SELECT day,trunc_quarter(evtime) evtime,m_id
          FROM' || l_tableName(i) ||
'GROUP BY day,trunc_quarter(evtime),m_id HAVING count(*)>1)   ORDER BY evtime';

How to find out the table, data for the IDOCS is pulled from?

HI
The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397. This creates IDOCS that are sent out and eventually wind up in IMOS.
The IDOC Type is CREMAS.
Can you tell me which table or tables the data for these IDOCS is pulled from?
Or tell me the procedure to find out the table name.
Thanks,
das.
Edited by: sathish dasari on Dec 10, 2009 11:54 AM

You can use Transp. Table      TBD62 .
enter Message Type                      CREMAS
you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

Need help with adding lightbox feature to images pulled from .js

Hello,
I've been attempting to add a lightbox to separate images (no group) in a responsive one page portfolio template. Unfortunately I'm not savy with this topic.
The template came with a hover action to apply what I would believe to be a light box image but no other documentation on how to add it to the images. I've looked everywhere.
The portfolio gallery is built in .js Here is some code The image code you see is just copied over and over to add images.
BTW - Lightbox mxp only allows you to add to an image when clicked on in the properties. These images are pulled from .js
Here is a link to the site:
http://wswdesign.com
Please help!
<ul class="portfoliofilter">
<li class="filter active" data-filter="design branding media web">All</li>
      <li class="filter" data-filter="design">PRINT Design</li>
      <li class="filter" data-filter="branding">Branding</li>
      <li class="filter" data-filter="media">Digital Media</li>
      <li class="filter" data-filter="web">WEB DESIGN</li>
<ul class="portfolio">
<li class="item design">
<div class="portfolioitem">
<img src="img/print1.jpg">
<div class="portfoliohover">
<div class="info">
<h1>+</h1>
<h5>trade show graphics</h5>
<h6><b class="light-gray">Celguard / Membrana</b></h6>
</div>
</div>
</div>
</li>

You might want to correct your HTML errors first.
[Invalid] Markup Validation of http://wswdesign.com/ - W3C Markup Validator
Your document contains links to jQuery scripts. But I don't see any lightbox in there. It appears to be using jQuery's core library as well as scripts for carousel and scrolling/show & hide features.
Nancy O.

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

Restrict number of rows to be pulled from PeopleSoft's PS_LEDGER table while importing data in FDMEE

Hi,
We need to know if FDMEE 11.1.2.3.520 product supports restricting number of rows to be pulled from PeopleSoft's PS_LEDGER table.
All the records fetched from PS_LEDGER is getting loaded into TDATASEG table.
Currently, it is trying to pull all the records based on the given "period", "version" and "year" combination. We are looking to restrict rows based on specific account/entity/program/subprogram combination.
If this is can be done, will it be an out-of-the-box functionality or does it require any customization/import scripts/api.
Admin guide does say we can use Jython to filter rows using import scripts. However, it seems to be limited to file not a table as a source.
I have attached a document with the screenshots so that the issue is better understood !
Thanks,
Hari

1)
When you set a column to hidden in a classic report using the method I described, it creates hidden form elements for that column.
<tt><input type="hidden" name="f01" value="" id="f01_0002"></tt>
You should inspect the source to figure out the name value.
Since this belongs to the wwv_flow form, we can therefore get this data with: wwv_flow.f01
Alternatively, you could have used the apex_item API to achieve the same result, which probably gives a bit better control.
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CHDBFHGA
select apex_item.hidden(1, col) || col col
from table
Set that column to a standard report column so it doesn't escape the html.
You can also reference the data in these fields using PL/SQL using the apex_application API:
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_app.htm#CHDGJBAB
2)
As above, setting the column to hidden creates hidden elements on the page. It is simply f01 because that is the only hidden field I would have on my page. With four reports on the page, you would need to be careful not to do the same on the other reports, as you would get inaccurate data. For each report, setting columns to hidden always starts with f01. In that, you would be best to use the apex_item API.
I actually initially ran into this issue when i had a tabular form on the same page as a report with hidden fields, which was causing conflicts in the page processes.
Hope it helps.

Officejet 8600 won't pull from Tray 2 after Mac OS update

I recently installed the Mac OSX 10.10 Yosemite update. Immediately after, my HP Officejet 8600 all-in-one would not pull from the optional second tray. There is a 10/22/14 driver update that says it is for OSSX 10.10, but does not fix the problem. After trying every single solution I could think of, including deleting all printers from my system, repairing permissions, installing the new driver, uninstalling and re-installing the second tray, among other things, nothing worked.
The problem appears to be that every time I print, it unselects the "Optional Paper Tray Input" setting from the OS settings. One work around is to go in and make sure that box is checked each time I print, which is a pain and only works about 80% of the time.
The printer is an office printer and Tray 1 is envelopes. While I could put regular paper in Tray 1, that would be unfair to the other people in the office who use the printer and would need to manually do an envelope each time.
I called HP support and they basically told me that it was a bug that was not currently fixed. They said they would e-mail me when a new updated driver is released (I'll be holding my breath for that). I'm posting this here hoping that admins notice it and get moving on that update so that I can get my printer back.

I have the same problem as everyone else in this thread. I've been on another thread, here: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-8600-won-t-print-from-tray-2-in-upda... .
I have spent hours of time on the phone and in chat sessions with HP, then Apple, and then HP again. The HP reps made it clear that the problem is in the HP update that was issued to work with OS 10.10, and that a fix would be coming soon. That was over a month ago, and still nothing.
Since HP reps seem to monitor this thread, could someone from HP inform us as to when there will be a solution? The last HP software update for this printer was October 22nd, so you've had plenty of time to fix this problem, which HP has repeatedly promised to do, but failed to do.

Defaulting the Service Provider for the receipts pulled from credit card

Hi,
When the Associate goes on a business trip , some of the expenses are processed through the AMEX corporate credit card. Using a custom PRCC , these credit card transactions are uploaded into the system and are available as buffer during the trip creation. Associates creates the trip using ESS Portal. When the Associate selects the expense from the credit card buffer , we want the Service Provider to be defaulted to AX (AMEX). The service provider code for AMEX is configured as AX.
In the following configuration (Travel Expenses->Master Data->Credit Card Clearing->Define Assignment Table for Credit Card Clearing , we updated the Service Provider as AX for all the expense types related to AMEX.
Now we notice that AX is not defaulted in the Service Provider when the Associates pulls the expense from the AMEX credit card buffer.
Is there a way to default the service provider for all the expenses pulled from the credit card buffer?
Thanks
Sukumar

Hi Nandagopal,
You are right that the origin column has Amex logo when selected from the Buffer. We are using Service provider in determining who the payment should go to. If the expense is from the credit card buffer , the payment should go to AMEX directly. If the expense is non-AMEX (i.e manual entry and not from buffer) , then the payment will go to the employee themselves. Different wage types are determined based on the Service Provider for the same expense type. For example for expense type ACAR (Rental) , if the Service Provider is AX , then wage type say WJ67 is selected by the system . For expense type ACAR and no Service provider , then wage type WJ17 is derived. The accounting is determined based on the wage type.
So Service Provider is one of the key field that determines the accounting. When the associate selects from credit card buffer , the associate should also select the service provider as AX so that payment goes to AMEX. If the Associate forgets to select the service provider , then the payment goes to the Employee. Then the employee has to pay AMEX separately. In order to avoid this, we want to default the service provider as AX when the associate pulls from the credit card buffer.
We maintained the default service provider as AX for AMEX credit card clearing in img node Travel Expenses->Master Data->Credit Card Clearing->Define Assignment Table for Credit Card clearing. In this node we link the credit card company transaction keys to SAP expense type and you have the option to select the Service Provider. But his default is not working in Portal.
Please let me know if this default setting should work.
Thanks
Sukumar

Records not pulling from Pervasive database

We just recently upgraded to Crystal Reports 2008 from Crystal Reports 7. We have some reports that pull from a pervasive database. After some looking I found that in the reports that we have already made that I needed to set up a Btrieve database (It is pulling from a pervasive database) connection and update it and all the reports loaded fine. I was able to update all the reports that use this database and they all seemed to be working great. Now, a couple days later when we run the report it acts like it is pulling the information but never displays it. Once we hit the refresh button, it pops up with the parameters box, we enter the values and then at the bottom it acts like it is running thru all the records. Except saying 1 of 1 and 2 of 2...ending at 10 of 10 like it always has done before, it goes 0 of 1, 0 of 2...ending at 0 of 10.
I also go to the old version of Crystal Reports and it comes up with the same problem.
I tried redoing the connection, but that didn't help either.
Please Help!

I have finally had a chance to go to the computer with crystal reports to try your sql test. When I go to database menu the "Show SQL Query" is grayed out. So I am unable to select it. I tried this in design and preview view, with no luck.
I was able to play around some more to try to pinpoint the problem and here is a couple things that stood out to me. Maybe that will be helpful to you to help me determine my problem.
After running the report I went to Dependency checker and it came back with "Data Source: There was an unknown problem detected when checking table Vendor, on server M:\FB\AP\FILE.DDF. Please verify your report." and "Data Source: There was an unknown problem detected when checking table Invoices, on server M:\FB\AP\FILE.DDF. Please verify your report." I have verified my database under the database menu and that has always come back with database updated. I never did see a verify report button to do what the error message says.
The other thing is I found what parameter is causing me problems. There are 4 parameters..status, month, day, year. In status we always put S, but the values in that field could be S, C, or X. If I change the status to the C or X, it will pull and display data. So, I initially thought they maybe there was not "S" that is statisfying the rest of the parameters. However, after looking thru the reports in the program this database was made for and using, there is in fact "S"s that would satisfy the rest of the parameters and should be showing this data.
So my next question why would the report run correctly for some values but not others?

Music Stops Playing When Pulled From Macbook

Hi,
I have an ATV2 that allows me to push music from my PC's iTunes library as well as pull music from it using the remote and on-screen menu. It also works fine with my Macbook Pro when the Macbook is pushing to ATV; however, if I try to pull music from my Macbook by using the ATV on screen menu, I will get 2 or three songs and then it stops playing. The library is still visible, but the music stops.
I have tried restoring ATV and changing the channels in my wireless router. My wireless speeds are OK (plus it works fine when pushing/pulling from PC and pushing from Macbook).
Any suggestions?
Thanks,
Jim

OK....I think I have the problem. My ATV was a little to close to my wireless headset and speaker transmitters. Moving it away from them seems to have done the trick.
Hopefully this helps someone else someday!
Cheers,
Jim

Will a Built-in Modem pulled from a Dual 867mhz work in my DP 500 Mhz Mac

Similar Messages

Maybe you are looking for