Detail Info on How SEM-BCS and NewGL Are Integrated

Dear Experts,
I need help. Do you have any detail documentation (functional & technical documents) on how NewGL integrate with SEM-BCS?
We need the documents to make sure that we get the benefits on implementing both NewGL and SEM-BCS.
Thank you for your help.

Hi
Please check below url may be it would be useful to you
http://www.sapprofessionals.org/special/sem-bcs-key-design-consideration-integration-points-sap-ecc

Similar Messages

How Oracle ASCP and Inventory are integrated ,what are the Integration poin

Hi All Gurus,
Can any one tell me..
How Oracle ASCP and Inventory are integrated ,what are the Integration point of these modules ...?
Thanks,
Satyam

Here is a simplistic explanation on the the integration.
When you launch data collection from the ASCP side, Oracle launches a Refresh Snapshot process that gathers the latest inventory (and other modules) information into Snapshots. Snapshots are like materialized views. Then the Planning Data Pull is launched. That process pulls information from these snapshots into the ASCP side.
The following inventory information comes over to ASCP
Item master data (such as order modifiers, planning exception sets etc. )
item categories
Onhand quantities (including consigned invetory quantities) in nettable locations
subinventories
reservations
safety stocks
forecasts
item planners
Quantity in receiving or in transit
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

How SEM BCS handled balance carried forward?

Hi,
I would like to find out how SEM BCS handled balance carried forward?
Income statement
Profit after Tax - 50
Balance Sheet
Retained profit (last year) - 100
Current Year profit - 50
How do i configurate 'Profit after Tax' = 'Current Year profit' in workbench? Is BCS going to store the computed results?
Balance items (ie 'Retained profit (last year)' and 'Current Year profit') by default are carry forward to next year in BCS.
Do i need to configurate 'Current Year profit' add to 'Retained profit (last year)'?
Pls advise.
Thanks.
Regards, Renee

Hi Renee,
By default, the balance sheet items are to be carried forward to next year. If you dont make any settings, both items, Retained profit (last year) and Current Year profit will be transferred to themselves, that is not correct.
You need to show the system which items are to be carried forward not to themselves.
To force the system to make the proper transfer, in UCWB go to Consolidation Functions -> Balance Carryforward -> Items to be Carried Forward.
Enter there the following information:
<b>Orig. Item__________Debit Item_______Credit Item</b>
Current Year profit____RE (last year)_____RE (last year)
Do the similar operation for all items to be carried to other than themselves items, for example dividends of the current and last years etc.
Hope this helps.

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

Differences between SEM BCS and SAP BPC

Hello All,
Can you please let me know the differences between SEM BCS and SAP BPC. What I know is SEM BCS is an SAP product for Financial Consolidation (Legal and Management). SAP BPC is the new product taken over from Outlooksoft. It also features the consolidationa and planning functionalities. Can you please suggest which is a better product.
Regards
Vikram

There is nothing like better or worse product.
BCS has some strong features like consolidation monitor, investment consolidation and for most consolidation functions, configuration is very easy. In BPC, you may have to write scripts.
BCS has BW as the backbone where for BPC 5.1 there is none. Howveer, in BPC 7.0, the BPC will rest on BI and things will be much better.
Ravi Thothadri

Difference SEM-BCS and BO PLanning & Consolidation

Hi all,
as announced in the subject. I was wondering what the difference between SEM-BCS and BO Planning & Consolidation is(so referring to the consolidation part)?
Is BO Planning & Consolidation = BO Planning + SEM BCS
Looking forward to your ideas!
Best regards
Hagen

Hi Collet,
Sorry I have no time to make a full-fledged comparison SEM-BCS and SAP BPC as you asked.
Regarding your last link: very interesting information. Thank you very much.
The citation from the article:
Known Limitations
In SAP BusinessObjects Planning and Consolidation (BPC), organizations (i.e. entities and groups/consolidation scopes) car vary according to Category and Time. However, all the other dimensions are static, which means they have neither category nor time dependency. As a result, the model presented here will use static Profit Center and Intercompany Profit Center dimensions.
Eliminations (so called Automatic Adjustments in BPC) are primarily driven by Legal Entity and Intercompany dimensions. As a result, when it comes to Matrix Consolidation, each elimination will still occur based on this fact. So, basically, an elimination is triggered if both an Entity and the Intercompany entity are being consolidated under the same node (i.e. Group or Consolidation scope). In other words, BPC does not evaluate as such the Profit Center and Intercompany Profit Center dimensions when it comes to performing eliminations. Amounts will be eliminated based on the Legal Entity view. However, it is possible to analyze and group eliminations by Profit Center later on. As a result, Matrix consolidation will heavily leverage the reporting/filtering capabilities of the product.
I'm afraid that in SEM-BCS' sense the Matrix consolidation has much more deep meaning than that presented here.

I have a folder and 3 files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked?

I have an empty folder and 3 .jpg files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked and I have full read & write access. Grateful for any assistance in solving this problem.

Back up all data.
Triple-click anywhere in the line below to select it:
ls -@Oaen De* | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

How can I change how email "from" and "to" are being handled by Groupware?

When a follow-up business activity (e.g. sales visit) is created in CRM and assigned to another by the "person responsible" field, it triggers the following action in Outlook:
u2022 Outlook recognizes that "created by" and "person responsible" are different
u2022 This recognition triggers sending an email invitation for an appointment
u2022Groupware presents / Outllok reads the "person responsible" to populate "from" Email field and "created by" to populate "to" Email field
u2022Outlook Email invitation is received by creator of the assigned follow-up (confusing the user since they are naturally thinking that the person they made responsible for the follow-up would need to accept the assignment)
How can I change how the email "from" and "to" are being handled by Groupware/Outlook ... in standard functionality? ... In custom work?
Edited by: Daniel A. Joseph on Jul 24, 2008 4:00 PM

Welcome to the Apple Community.
If you have a @me.com address, you can change the address you use to send email from using the drop down box in the from field in your email.

Where do I see how many photos (and movies) are in my Revel library?

I see no place that states how many photos or movies are in Revel.

Hi Pattie,
Thanks for the reply...but here's the status:
A.
I'm in the Revel program downloaded on my desktop...not on its web site...and I made an album but can't find any place where it shows the number of photos in that album.
As I view Mel's Library page and go to: View/Added By there is a total in the upper left corner that shows the total photos Added by ME.
But when viewing photos in my library: View/ All Photos by Date in either Grid or Track there is no total anywhere on the page. Each track has it's total and that's it.
I don't understand how Revel ID's a Duplicate.
A window, Skipped Photos, pops up and states, "X photos were duplicates" indicating that they were not uploaded - and that is supported by the math (in 3 out of 5 uploads): Selected photos minus Videos and Dupes = # of photos uploaded.
However, on the last upload of 2000 Selected photos, the window said there were 2 duplicates. I counted 19 identical photos! Also without Revel identifying what the dupes actually were (by its reckoning) I have no way of determining what was not uploaded. All VERY confusing.
When uploading using the download program on my laptop Revel won't upload videos.
B.
I went to the website and yes, when I click on the album it shows the photo count at the bottom. However, in order to get to the bottom of 10,000+ photos in the Library is a major and lengthy process as clicking on the side bar only takes me down a few photos with each click...and not to the end! There's no way to easily get to the bottom! Scrolling the photos is equally slow and useless when all I'm trying to see is the total count! click on Sort oldest 1st and the newest go to the top! and the reverse is true of the other!
mel

How ATG,Endeca,Webcenter sites are integrated in eCommerce?

Hi all,I just began studying ATG,and have not known it very much. My company use oracle's products like ATG,Endeca,webcenter sites.But I don't understand:
1.how they are integrated togethor.
2.What is their respective role in the whole eCommerce development?
3.how they collaborate with each other ?
I will very appreciate if you can solve my confusion.
sorry about my poor english.

Hi Sarah
What verison of ATG is your company using?
We can then point you to the right material.
For example prior to ATG 10.1.1 there was no product integration between ATG/Endeca it would have been a custom integration.
Thanks
Gareth

File loaded to SEM - BCS and need a notification e-mail to the Manager

Hi SAP Gurus,
My requirement is to trigger a e-mail notification when I do a flexible load to BCS to the concern Manager of the particular OPU (Company). Could anyone of you please guide me in this regard?
Many thanks,
Sasi

Hi Chowdary,
Thank you for the reply.
The loading scenario is that the user have a flat file on the system which is uploaded via UCMON transaction.
Could you please let me know how can I do this?
Thank you,
Sasi

How to write and what are reports for Income Statement by Region (SD/AR)?

Hi all,
I am anticipating to write some abap reports, I am new to abap..Here is one of them..Anyone can help me with writing a Report , how to do 'Income Statement by Region (SD/AR)'
But since I am new to abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
Appreciate your help!
Regards,
Boby

I agree with how you think bugs should be reported. For now, I'd suggest posting them here, in detail. Some of us can relay them to the appropriate places, at least until we hear from Adobe personnel about an official location or method for the average end user.
Lee Jay

How states BPEL and MEDIATOR are generated?

Hi All,
we know that the execution of Mediator are BPEL could generate many different kind of states.
Here is a list of the possibile states:
https://blogs.oracle.com/ateamsoab2b/entry/list_of_all_states_from
But does anyone knows what are the patterns that will generate these states?
For example we have seen that using a terminate in a BPEL process generate the state STATE_CLOSED_ABORTED.
Or using a Throw and a Reply to raise a fault generated the state STATE_CLOSED_ROLLED_BACK.
We need the logic to understand how every state is generated, and we cannot develop all the prototype to understand this.
Is there some documentation about these states?
Thanks a lot to everyone that could help me.

<messages>
<SyncJobOrderEBSReqMsg>
<part name="QueryJobOrderEBM">
<ebo:QueryJobOrderEBM>
<ebo:DataArea>
<ebo:QueryJobOrder>
<corecom:Identification>
<corecom:ID>351407</corecom:ID>
</corecom:Identification>
</ebo:QueryJobOrder>
</ebo:DataArea>
</ebo:QueryJobOrderEBM>
</part>
</SyncJobOrderEBSReqMsg>
<SyncJobOrderEBSRespMsg>
<part name="QueryJobOrderResponseEBM">
<QueryJobOrderResponseEBM>
<DataArea>
<QueryJobOrderResponse>
<corecom:Identification>
<corecom:ID>817759</corecom:ID>
</corecom:Identification>
<corecom:Status>
<corecom:Code>F</corecom:Code>
</corecom:Status>
</QueryJobOrderResponse>
</DataArea>
</QueryJobOrderResponseEBM>
</part>
</SyncJobOrderEBSRespMsg>
</messages>

Some how my ipad and phone are sinc pictures and apps but I don't want them too how to I fix that ???

All the pics I take on my phone are showing up on my ipad and all the appsi download on my phone are showing up on my ipad I don't like this since my ipad is for work and school and the pics and apps take up memory I don't have to spare and am annoyed that I have to keep deleting stuff I'm afraid to delete my pics because I am afraid it will also be deleted from my phone can someone help me with this please !!!!!!!

If you currently have Settings > iTunes & App Store > Apps (under 'automatic downloads') set 'on' on your iPad then turn that 'off'. For the photos, do you currently have Settings > iCloud > Photos > My Photo Stream set 'on' on your iPad ?

How come "overlay" and "stack" are not found in the LabVIEW help?

In searching the posted questions and answers, I got the vibe that the answer to my problem
might lie in "stacked" or "overlaid" charts.
Imagine my surprise when searching for these words turned up nothing.
(OK, not quite. I do find Plot Multi-XY, but the documentation on that so bare-bones as to be no help whatsoever.)

Thank you for posting comments on the LabVIEW documentation. We're constantly striving to improve the documentation, so any specific suggestions you have are welcome. In the future, please send any comments on National Instruments documentation to [email protected] so we can address your concerns in a timely matter.
Regarding your specific question, I encourage you to search two locations in the documentation when you are looking for information. You searched the online help, but you also can search all PDF documents at one time. To do so, select Help>>View Printed Manuals in LabVIEW, click the Search button, and type in the word you want to search for. Doing so searches all PDF documents installed with LabVIEW, including manuals, application notes, white papers, a
nd so on.
If you were to search for "overlaid" or "stacked", you would find the following text in the LabVIEW User Manual and a graphic illustrating the plots:
"Overlaid Versus Stacked Plots
You can display multiple plots on a chart by using a single vertical scale, called overlaid plots, or by using multiple vertical scales, called stacked plots. Figure 11-2 shows examples of overlaid plots and stacked plots. Refer to the Charts VI in the examples\general\graphs\charts.llb for examples of different kinds of charts and the data types they accept."
I will make a note of your feedback and we will try to improve the documentation of these plots in the online help.
Again, thank you for your feedback and please send any specific feedback directly to [email protected]
Kelly Holmes
LabVIEW Documentation Team
Kelly H
LabVIEW Documentation
National Instruments

Detail Info on How SEM-BCS and NewGL Are Integrated

Similar Messages

Maybe you are looking for