How come "overlay" and "stack" are not found in the LabVIEW help?

In searching the posted questions and answers, I got the vibe that the answer to my problem
might lie in "stacked" or "overlaid" charts.
Imagine my surprise when searching for these words turned up nothing.
(OK, not quite. I do find Plot Multi-XY, but the documentation on that so bare-bones as to be no help whatsoever.)

Thank you for posting comments on the LabVIEW documentation. We're constantly striving to improve the documentation, so any specific suggestions you have are welcome. In the future, please send any comments on National Instruments documentation to [email protected] so we can address your concerns in a timely matter.
Regarding your specific question, I encourage you to search two locations in the documentation when you are looking for information. You searched the online help, but you also can search all PDF documents at one time. To do so, select Help>>View Printed Manuals in LabVIEW, click the Search button, and type in the word you want to search for. Doing so searches all PDF documents installed with LabVIEW, including manuals, application notes, white papers, a
nd so on.
If you were to search for "overlaid" or "stacked", you would find the following text in the LabVIEW User Manual and a graphic illustrating the plots:
"Overlaid Versus Stacked Plots
You can display multiple plots on a chart by using a single vertical scale, called overlaid plots, or by using multiple vertical scales, called stacked plots. Figure 11-2 shows examples of overlaid plots and stacked plots. Refer to the Charts VI in the examples\general\graphs\charts.llb for examples of different kinds of charts and the data types they accept."
I will make a note of your feedback and we will try to improve the documentation of these plots in the online help.
Again, thank you for your feedback and please send any specific feedback directly to [email protected]
Kelly Holmes
LabVIEW Documentation Team
Kelly H
LabVIEW Documentation
National Instruments

Similar Messages

  • When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?

    When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?
    Thanks, Rich

    In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf  type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

  • HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

    I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

    iTunes Store: Hiding and unhiding purchases
    http://support.apple.com/kb/HT4919

  • Aperture ate my picture files and they are not recoverable.  The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall.  But Purchases says it is "Installed" so it does not let me download it again.  HELP!!!!

    Aperture ate my picture files and they are not recoverable.  The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall.  But Purchases says it is "Installed" so it does not let me download it again.  HELP!!!!

    I typed Aperture into Spotlight and sure enough it did show up.
    It looks like it is supposed to be in Apps.
    But it is not there.
    So I clicked on the spotlight Aperture and it opened up the App!!!!
    But I do not know where it is to move it!
    How can I find it?
    While Aperture is running and you are seeing it in the Dock, ctrl-click (or right click) the Dock icon.
    You will see a contextual menu. Click on "Options", then select "Show in Finder".
    And check the "keep in Dock" mark, so you will not lose it from the Dock.

  • Contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    Hey jimneeds,
    Thanks for the question. This feature was discontinued with OS X Mavericks:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/HT1386
    What you can sync
    […] - Contacts*
    *To sync this content on an iOS device using OS X Mavericks v10.9 or later, use iCloud or another cloud-based service.
    Thanks,
    Matt M.

  • Ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

    ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

    found the solution: the filmstrip was to small !!!

  • Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    You should ask in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I am hard wired. Screen occasionally comes up saying "You are not connected to the Internet"

    I have a new IMac desktop. It is hard wired. All the FIOS equipment has been verified and replaced. Still, every day, a few times, a screen comes up saying "You are not connected to the Internet." It seems to have experts stumped. Any advice, thoughts, experience with this?  The screen stays up only a few seconds.

    When this happens, if it stays up for a period of time, go to System Preferences > Network > unlock the lock lower let side bar > Advanced lower right > TCP/IP and click Renew DCHP Lease.  See if that helps.

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening.  My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

    my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening.  My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud.  Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
    Most recent version of mountain lion updated over a month ago.  New iPad in use for over a month.
    thanks

    The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password.  Typical when today I'm waiting some important emails!

  • When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

    When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

    I have solved the Problem

  • MRS - Resources and demands are not visible in the Planning Board

    Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
    But when I am accessing Manageru2019s Planning Board -  /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core"
    The details of the Error message
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core
    Message no. /MRSS/SGE034
    Diagnosis
    Resource 00000000010000000000000000000000 has not yet been created in MRS.
    System Response
    No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
    Procedure
    Contact technical support.
    Procedure for System Administration
    Create the resource in question in MRS."
    I have run the Report
    /MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
    But even after that I am not getting the resources in the planning board.
    Also I am not able to view the Demands from PM/CS orders.
    I have created PM Orders and
    Assigned Work centres to the operations and
    assigned the Resources to the Operations.
    The HR assignment to the work center is also done.
    I have tried T Code   /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
    to pull the order demand. But it is not working
    Its giving following message
    1004280 is not a valid demand
    Message no. /MRSS/SGU139
    Diagnosis
    The order does not exist in MRS.
    This may be because:
    The order number has an invalid format.
    The order does not exist.
    The order is not relevant for planning and has therefore not been transferred to MRS.
    The order has been deleted from MRS.
    Pls help me on this.
    Thanks in advance and warm regards
    Purnendu

    Hi Anil/Saurabh - Thanks a lot for your replies.
    I have checked the MRS configuration as per your suggestion.
    It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
    But the Demands are not visible on the Planning Board.
    I have checked in the debugging mode what is causing the problem - It looks like
    "The Database Table: /mrss/d_dem_h  needs entry"
    But there are no entries in this table.
    I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
    I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
    How do I maintain entries in this table?
    How do I transfer Demand from ECC to MRS?
    Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
    We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
    To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
    So I am not sure whether it is executing the program properly.
    Pls help me resolve these issues.
    Thanks and warm regards
    Purnendu

  • Hard drive and dvd are not recognized in the setup menu, what could be wrong?

    The hard drive and dvd drive are not recognized on the setup menu for my Pavilion a4316f desktop computer.  Could it be a failure of the controller?  Can a PCI controller be used to replace the mother board controller?
    This question was solved.
    View Solution.

    The Recovery process would erase you hard drive, and attempt to install a fresh OS. Decidely a bad choice if you wanted to save your data files. The Recovery sets are "tattoo" with the BIOS hardwafre configuration. It will not, IMHO, recognize the PCI Sata card.
    You mentioned the Recovery program on the hard drive actually requested the installer of the controller (PCI card). Try running from that.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Iphone car charger once again not charging. Second one and they are not cheap from the apple store.Any else have these problems?

    My Iphone car charger is not charging again. This is the second one I have bought from the Apple store and they are not cheap anyone else have problems?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • How to push apps which are not available in the App Store?

    Hi :-)
    I've got one question: I would like to push apps via profile manager to different devices, which are not available in the App Store, so I can not buy them via VPP.
    Example: TeamViewer for OS X.

    You can't. Use something like Apple Remote Desktop.

Maybe you are looking for

  • FF3.6.13 keeps telling me updates are available but it has been connecting to server for days when is it going to happen

    I/m using winXP SP when i open FF browser a message appears in the bottom taskbar updates are avaialable Igo into "check for updates"& another box says "downloading the update" &"connecting to server" but this has been going on for days how long does

  • Button Layer

    Hello, Having trouble figuring out what the correct actionscript for a button that is trying to access a labeled frame within a movie that is part of a larger movie. It works if I play it by itself outside of the larger movie, but I'm not sure how to

  • Placed Photoshop Images

    I'm sure this question has been asked many times and I'm sorry if I am repeating a post that has already been answered. My problem is this: When I place a Photoshop PSD file into my InDesign CS4 document, all the other images on that particular page

  • Help with ARD

    I have setup a client to access a work computer with ARD. I can remotely connect and control the computer OK. BUT, in ARD the computer shows it is ofline, and i cannot get any reports, initiate a chat or any other command. What am I doing wrong??? Ho

  • What to do when Macbook keeps on ejecting the CD/DVD I insert?

    I just bought a CD and a DVD. As soon as I got home, I wanted to listen to the CD so got my laptop and insterted it right away. CD was being read (well, based on the "sounds") but seconds after, it'll be ejected. I tried to insert the DVD I got as we