Detail rows not fetched in af:iterator for the first time

Hi,
I have a table with 3 columns. Column 3 is a detail record with column 1 being the parent.
Column 3 is displayed in the table using af:iterator #{row.detailRows}.
The detail records are created in a different page.
When I add the detail records to the master in this page and navigate to the page where the table is rendered, sometimes I do not see the column 3(detail rows) displayed immediately. The iterator #{row.detailRows} returns no rows.
When I go back to the previous page wait for sometime and navigate to the page with table, I see the detail rows.
This is happening intermittently and not always.
Why is the iterator returning no rows sometimes(even though it returns values after a while)?
When this happens, I checked the back end data and all the data is inserted into the db tables immediately.
Jdev version: 11.1.1.4.0
Any help is appreciated.
Thanks!

Srini,
Should I set the 'Target Data Source' to the detail iterator?
I want detail rows displayed in column 3 for all rows in the table on page load, not on row selection.
The page on load should display the table in below manner, irrespective of row selection all rows' detail values should be rendered.
S No.
Master key
Detail values
1
master1
detail1-1
detail1-2
detail1-3
2
master2
detail2-1
detail2-2
detail2-3
detail2-4
3
master3
detail3-1
detail3-2
detail3-3
Thanks!

Similar Messages

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

Page with PartialTriggers is not working when it loads for the first time

Hi All,
I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
(The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
The button invokes a BEPL process.
One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
Kindly help.
<af:panelFormLayout id="pfl1"
inlineStyle="font-weight:bold; height:181px;"
>
<af:inputText value="#{bindings.PEID.inputValue}"
label="PEID"
required="#{bindings.PEID.hints.mandatory}"
columns="#{bindings.PEID.hints.displayWidth}"
maximumLength="#{bindings.PEID.hints.precision}"
shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.PEID.validator}"/>
</af:inputText>

<af:inputDate value="#{bindings.StartDateTime.inputValue}"
label="Start Date Time"
shortDesc="#{bindings.StartDateTime.hints.tooltip}"
id="id1" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_startDate}"
valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
autoSubmit="true"
required="true" immediate="true">
<f:validator binding="#{bindings.StartDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
</af:inputDate>
<af:inputDate value="#{bindings.EndDateTime.inputValue}"
label="End Date Time"
shortDesc="#{bindings.EndDateTime.hints.tooltip}"
id="id2" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_endDate}"
partialTriggers="id1"
required="true"
valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
autoSubmit="true" immediate="true">
<af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
hintMinimum="End date should be greater than the Start Date"
/>
<f:validator binding="#{bindings.EndDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
</af:inputDate>
<af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
label="Process IAF"
required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
id="it2"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
label="Process SMS"
required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
id="it5"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
label="Process Full Indicator"
required="#{bindings.ProcessFullIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
id="it4"
inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.processFullIndicator}"
valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
autoSubmit="true">
<f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
<f:facet name="center">
<af:panelGroupLayout layout="horizontal"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl2">
<af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
text="Process RFI"
disabled="#{!bindings.ProcessRFI.enabled}"
id="cb2"
attributeChangeListener="#{ProcessRFI.processResult}"/>
<af:resetButton text="Clear" id="rb1"/>
<f:facet name="separator">
<af:spacer width="10" height="10" id="s2"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelFormLayout>

Hi John,
My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
Kindly advice,
Thanks,
Ram

Can not get JSP to work for the first time.

This is my first attempt to write JSPs. When TOMCAT attempts to render my first java server page TOMCAT reports the following two errors:
org.apache.jasper.JasperException: Unable to compile class for JSPerror: Invalid class file format in C:\j2sdk1.4.0_01\jre\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
C:\Program Files\Apache Tomcat 4.0\work\Standalone\localhost\JobEntry\HeadingExample$jsp.java:0: Class java.lang.Object not found in class javax.servlet.GenericServlet.
package org.apache.jsp;
I am on an XP box, running jwsdp-1_0_01, j2sdk1.4.0_01, and TOMCAT 4.04.

You might want to try downloading a newer Tomcat Version 4.1.18 works well. Follow the URL below. I have tried this version with the SDK 1.4 in the past, without problems. It might be that your older version of Tomcat just doesn't like the 1.4 SDK. Would take 5 minutes max on a decent http connection to DL and install.
http://jakarta.apache.org/site/binindex.cgi

Pr Pro CC 2014 not startup (for the first time)

Premiere CC 2014 wil not startup on my iMac. (for the first time)
It shows:
" Adobe Premiere Pro coult not find any capable video play modules. Please update your video display drivers and startup"
My iMac:
O.S. 10.9.5
3,5 GHz i7
32 GB 1600 MHz DDR3
Video:
NVIDIA Geforce GTX 780 m 4096 MB
I foud a CUDA driver:
version 6.5.18
What to do?

Hi,
Please go this location on your computer:
Click on Go on the top- Go to folder- Type ~/library then go to application folder- rename the adobe folder to old adobe
go back to ~/library then go to preferences and rename the adobe folder to old adobe
go to documents and rename the adobe folder to old adobe.
After doing this you will loosed your synced settings and customized keyboard short cuts and effects if any.
Thank You
Arjun

I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

After syncing a replacement iPad for the first time, my apps have a "waiting " on the screen I can access them but not on opening screen

After syncing a replacement iPad for the first time, my apps now have a"waiting" message . I can still access from settings but not on the opening app page

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
You may need to delete the game app and redownload (you won't be charged).
 Cheers, Tom

TS3772 Hi Team, I fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to vi

Hi Team, I am fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to play movie, any help please for someone who hasnt got a clue

where did you download the movie from?
what is it doing when it wont allow you to play the movie?
since you downloaded quicktime is it still asking you to download quicktime?

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I live in Italy and I am trying to buy an App, for the first time with my iphone4...in the past only downloaded free apps free apps; I have a US Visa card and it is not accepted by italian Itunes...what can I do to do my purchases?

I live in Italy and I am trying to buy an App, for the first time with my iphone4...in the past only downloaded free apps free apps; I have a US Visa card and it is not accepted by italian Itunes...what can I do to do my purchases?

On the apple website that is correct i beleive.... but i have an italian american express and am able to purchase stuff here in the US.
I mean, i dont think it really matters

For the first time ever... firefox has been crashing all day... is it suddenly not compattable with my windows 7? or what is going on? which version would work best for me?

today for the first time ever... firefox will not work.. it constantly is going to not responding... and i have never had this problem before... is it suddenly not compatible with windows 7? what is best suited for windows seven users?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

My Mail app opens unprompted everytime i reboot or awake my macbook pro from sleep. This was not an issue until i shut down my laptop for the first time in a while 2 days ago. ANy ideas how to stop this?

I recently shut down my MacBook Pro for the first time in a long time. SInce then, everytime i reboot or awake my laptop from sleep, the Mail app opens unprompted causing my computer to slow down incredibly, and some apps to freeze. I have no idea how to stop this or why it even started doing this. Any ideas on how to get it to stop? Thanks!

I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

Detail rows not fetched in af:iterator for the first time

Similar Messages

Maybe you are looking for