Details of PF_ASTAT_OPEN required

Hi All
I am debugging a standard transaction in which I am trying to find a the update statement for a particular table.
During debug I found that update is happening in a FM that is being called in UPDATE TASK. I debugged that task also and finally came to a fm named PF_ASTAT_OPEN after which entry appears in database.
Nothing is happening much in that FM (as per debug) but I am not able to figure out how it is causing database operations. I have searched on google and help.sap.com but not much is given about this.
Please help.
Thanks
Anuraag

Hi Anurag,
Take a look at www.se37.com a very good site for documentation on function modules.
The below link might help you:
http://help.sap.com/bp_bblibrary/500/documentation/E47_BB_ConfigGuide_EN_DE.doc
Have A Nice Day
Chaitanya.

Similar Messages

  • Smartform for Invoice: LB_BIL_INVOICE - Details of IS_BIL_INVOICE required

    Hello all,
    I am currently working on an Invoice Form and have created a copy of the standard SAP smartform LB_BIL_INVOICE.
    In the form interface, there's an import parameter  IS_BIL_INVOICE  which has a deep structure and holds the data required to be printed.
    1. Could someone give me the details of the various fields present in the deep structure? I have been given the table and field names in the specifications, but the structure of  IS_BIL_INVOICE has different names, e.g. MATERIAL for MATNR, etc. Hence it's a bit difficult to relate the standard SAP table-fields to the structure fields.
    2. I have written select queries for selecting data from various tables like VBRK, VBRP, LIPS, MARA, etc. Is it wrong to write queries in the Global Initialization of the smartform even though we might have some data in the Form Interface in the structure above? This approach is better for me as I will then not have to find out what data is present and what isn't in IS_BIL_INVOICE.
    Regards
    Ameya

    Hi Rohit,
    You can use this...
    select single WADAT_IST
       into W_WADAT_IST
       from likp
      where vbeln = is_bil_invoice-hd_ref-delvi_numb.
        W_WADAT_IST should be declared in GLOBAL DATA tab of type "WADAT_IST" and print theis variable at the required place inthe layout.
    Thanks and Regard,
    Bharat Kumar Reddy.V

  • Item Level Details in Output Requirements Control during Inbound Delivery

    Hello Experts,
    I have a requirement to access item level details of an inbound delivery at the time of processing the output requirement. The output requirement is defined for application E1 and has a related communication structure KOMKBE1. However, this structure does not have item details (Material, Plant, Batch is what is needed) . Is there another global communication structure that stores this data when the output requirement is called? If not, is there any other way to access that data during runtime?
    It is not possible to fetch it from the database tables because the delivery creation process is not yet complete and thus it is not stored in the database, as the output requirement is called when the SAVE button is clicked in VL31N.
    Thanks,
    - Neeraj
    EDIT: Found a solution: Using field symbols, I picked up the value of the needed details from the structures available in the calling program SAPMV50A. In this case, I did not use KOMKBE1 at all.
    Edited by: NeerajAngal on Oct 6, 2010 12:28 PM

    Hi
    As per my understanding you can try se63 option ..

  • Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

    I follow this blog to the letter - because it is the same as my scenario:
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
    Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

    Hi Lynn!!
    Check this SAP help for certain requirements when to use BPM:
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
    Take a look at this blog by Michal,
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
    Check this weblog for a step by step procedure:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    or case study go thru this blog:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    for checklist:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
    /people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
    Thanks !!
    Pls reward if useful

  • Excise Invoice details in FBL1N Required

    Hi Gurus,
    Is there any way where i can Display the Excise Invoice details while displaying Customer Line Items thru T.Code FBL1N.
    I am not able to insert a special field from settings either.
    Is there a solution..

    Your question is a little confusng - Do you mean to say you want to view the Excise info also ? If so, how is it being recorded on an invoice - Based on that, you would be able to add that field in the T Code FBL5N.

  • Sending Details -- URGENT HELP REQUIRED! ! !

    Hi,
    I have a programming problem which I need urgent help with....
    1.) I firstly have a HTML file which a user will fill out 3 fields on and submit.
    2.) A servlet will get these parameters, validate some information and update a database.
    Problem Part Needs to send on these details to another servlet which will be located on a seperate server.
    Is there a way of doing a submit like function without an actual submit, as this will all be done away from the user.
    Was initially going to use:
    ctx = getServletContext();
    rd = ctx.getRequestDispatcher("https://localhost:8443/servlet/FileName");But found out you can only do this with files in the same immediate location!
    3.) Next servlet will accept in the same details as 2, and do some more functions and database updating. Before again sendin on some details to another servlet! (so same problem as in 2).
    4.) Accepts in details from 3 and updaes database!
    So does anbody have any ideas how this can be done??
    Any help greatly appreciated.
    DBM.

    Whats so wrong with posting in more than one forum? I
    need to get this done in the next few hours and im not
    exaclt the most qualified java developer in the
    world!!
    sorry if its such a crime! :o(Should be obvious. You post exact question in forum A and B. Person A answers you on forum A. Person B, not knowing you were already answered because he's looking at the post on forum B, answers you on forum B, thus having wasted his time.

  • ODI - Confusion Continues.! Details About Connectivity Required

    Hi ,
    I clearly Explain my Queries in ODI ............( to be frank I got confused now ...... )
    1.I have my ODI installed.
    2. Source : Oracle ( different Server present in a diff Location).
    Target : Oracle which I have in my same server where ODI is installed.
    3. I have created 2 schemas for Master and Work Repository in my Target Oracle DB.
    4. Then I created an Master Repository.
    In this Step whether I need to give the Username and Password as
    My schema name and password which I have created for my Master Repository or Should I need to give User name and password of my Database.
    While creating the Work repository whether I need to give Schema user name and Password or Database User name and password......
    Because When I was trying it was showing successful connection for both.........KINDLY CLARIFY.
    5. Then In Topology after successful creation of master and work repo..........
    While defining.....
    While mentioning the Database connections (Master Repository)
    Which User name password I need to give...........
    Is it ....Schema User and Password of the Master Repository or Database(source) user and password......
    6. And For Designer when we r first creating ........
    Which User name password we need to give...........
    Is it ....Schema User and Password of the Master Repository......
    7.Regarding Dataserver Creations
    I tried creating a Dataserver in Oracle Technology .....In the Definition Tab it has username and Password....
    Which User and Password I shud give...?
    Whether I shud give Source schema user name and password......orelse just the source Database user and password....
    8. Physical Schema for the Dataserve..........
    In the Definition Tab it has...
    Schema(Schema) : In this whether I shud give Schema name of my Master Repository.
    Schema(work) : Whether I need to give Work repo schema Name.
    9. ODIPARAMS FILE CONFIGURATION:
    set ODI_SECU_DRIVER=? ( Driver Name of the Master Repository)
    set ODI_SECU_URL=? ( URL of the Master Repo)
    set ODI_SECU_USER=sa ( What shud I need to give )....Master Schema User Name:
    set ODI_SECU_ENCODED_PASS=
    set ODI_SECU_WORK_REP=? ( Is it work repo Name)
    set ODI_USER=SUPERVISOR
    set ODI_ENCODED_PASS=LELKIELGLJMDLKMGHEHJDBGBGFDGGH
    10. Can I use Local Agent to run all my interfaces........always ....during data migration is it rite ..........
    First Exp in installing and configuring ...............Thats why these many questions I got
    Kindly anyone clarify ............................
    Thanks
    AK

    Hi Cezar,
    Thanks Cezar....for ur comments
    I am jus Explaining:
    If run thru an Local agent ......it does not take any details from ODIPARAM file correct.......
    It jus runs like a DEMO......
    So whenever I want to run a Package or Interface........I shud Launch my agent then run thru that agent .........
    For this case ........I need to mention all the Parameter in ODI PARAMS file
    Am I correct ..............
    Thanks
    AK

  • Master (Multi Records) Detail Report (Help Required)

    We need Help for Master Detail Report that returns information for all departments and their employees. e.g.
    Page-1
    master Record: Accounts Depts Detail
    Detail Record: Accounts Empoyees Detail
    Page-2
    Master: Department-2 Detail
    Detail: Department-2 Employees Detail
    We are using Apex3.1
    Best Regards
    Jazib

    Hi,
    Changing the Detail part of the page to show all employees in all departments for a city wouldn't be too difficult. The main issue, I think, would be the page structure as, presumably would need to create new departments somewhere and, perhaps, add employees directly into that department?
    For example, if you have a DEPT/EMP master/detail pair of pages, when you click on a department on the report page, the top of the form page would show the department you have selected rather than the city for that department. You could change this to show the city instead, but where would you create new departments?
    Assuming that you can work through that, I should be able to explain how to have a detail form that handles multiple departments.
    Andy

  • Detailed monitor specs required for lenovo 300 g410

    I've got a Lenovo 300 G410, and I need the monitor specificiations, namely the ranges for the horizontal sync frequency and vertical refresh rate.
    On a different note, is the Intel Celeron a 32-bit or 64-bit processor?

    I doubt anyone can offer this information on LCD to you, because this must be made bu special diagnose laboratories. Only Lenovo can offer such information.
    Regarding Celeron - yes, in G410 all Celerons are 64-bit-capable due to  the fact that modern Celerons (4xx and 5xx series) are simply half-cutted Core 2 Duo with lower bus frequency and cache size. They're still powerfull enough to handle large range of tasks.
    //help will save the world

  • ISUPPLIER DETAILS AND STEPS REQUIRED..

    Hi Team,
    Currently we are working on the Oracle implementation on one of our client.
    I want to know that what is isupplier And from where we have to start this module?
    Some searching on Google suggest that it is defined as responsibility to INTERNAL USER (which is unclear to whom they are saying internal user), and the other searching on Google suggest to define a new user and then assign responsibilities as iSupplier Portal Full Access and iSupplier Portal Internal View,respectively to the new user.
    Kindly help me to solve my confusion.
    Thanks,
    Yumna.

    Here is what you are looking for, it's on 10.1.3.x but you can do it with TP3 as well
    http://groundside.com/blog/GrantRonald.php?title=adf_invokeaction_immediately_flitering_e&more=1&c=1&tb=1&pb=1
    Juan C.

  • Sales order requirement to planner

    Hello All
    This might be a basic question but need to know more details for this requirement
    1) once the purchase order is received from the customer for 5000 quantity which should be delivered to the customer in a time duration for 1 year  ( to note this Purchase order is not into SAP it is a manual document),Sales order is created in to SAP for the whole 5000 quantity remains open until the whole quantity is delivered.
    2) the delivery is happening week-on week or even some times on monthly basis some time immediate
    3) the question is where is the trig erring  point in SAP on sales order which sends the information  to the planner to produce the material?
    4) need to know more details regarding the integration between sales order and the planner requirement
    Thanks ..

    For your requirement, I would recommend you to check the option of standard functionality Scheduling Agreement.
    Sales doc type (VOV8)
    DS - Scheduling Agreement
    SD document categ
    E - Scheduling agreement
    Item Category (w. I Cat Grp NORM)
    LPN - Sched.Agreement Item
    Billing Relevence
    A - Delivery-related billing document
    Schedule Line Category
    CP - MRP
    Relevant for requirement & Availablity Check
    So, the system based on your
    in schedule line cat
    schedule for delivery will run MRP for
    for production plan
    Based on your schedule, your business flow will be:
    DS (VA31)
    - > LF (VL01N)
    - > F2 (VF01)
    Regards
    JP

  • I want master and Detail on different pages, but how?

    I don't know how to do a search for this question, and I've exhausted my time with this....someone please help!! 
    My site will be an online store, so far selling only one thing, but several different styles of that thing. I have five category pages (silk, satin, lace, etc), many of which have been through different spry layouts trying to find the right one (I've never used Spry, it wasn't covered in class, and I'm floundering). Each category page has a few styles, each one with an image, price, item number and "more info" link to open the detail page.Basically, what I want is similar to the Master/Detail layout, only I want the detail info to open in its own page, not the same one as the Master info (my category page). After giving up on finding out how to get a data set to cover multiple pages, I tried to run a new "Insert / Spry Data Set" on each detail page, assigning a unique div for each row (the div id being the item number, and the tr being nested within the div)....seems to work, but I lose my column names...they all default to "Column 0, Column 1, etc etc".
    The whole point of my trying this Spry thing was to save time....JEESHHH!
    I am perfectly willing to put in writing my eternal gratitude for any and all help.
    Thanks!

    In the absence of an online URL to your site which would allow us to give a tailor made solution, I shall try to explain the procedure to do what you have described.
    On the master page have an onlclick event that opens a new page complete with a URL variable. The variable will be used to identify the detail that is required.
    On the products page grab the URL variable using SpryURLUtils and use that value to set the XPath to the required detail as per http://labs.adobe.com/technologies/spry/samples/data_region/FilterXPath_with_params.html
    A better way is to place the detail in an AP which is hidden until a master entry is clicked on and can be hidden with a close button, similar to a Lightbox. This is easier to program and is more pleasing for the user.
    You could also use Alex July's SpryPopUpWidget which can be found here http://linecraft.com/spry-pop-up-dialog/extension.php. I have used this on numerous occasions to house my forms.

  • How to view ALL batch job details (SM37) at one glance ?

    Dear all,
    I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
    In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
    Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
    Thanks.
    Advice and comment will be appreciated.
    Regards,
    Kent

    Dear Prashanth,
    Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
    JOBNAME = Background job name
    SDLSTRTDT = Planned Start Date for Background Job
    SDLSTRTTM = Planned start time for background Job
    SDLUNAME = Initiator of job/step scheduling
    PRDMINS = Duration period (in minutes) for a batch job
    PRDHOURS = Duration period (in hours) for a batch job
    PRDDAYS = Duration (in days) of DBA action
    PRDWEEKS = Duration period (in weeks) for a batch job
    PRDMONTHS = Duration period (in months) for a batch job
    PERIODIC = Periodic jobs indicator ('X')
    STATUS = State of Background Job, S = Released, F = Finished
    AUTHCKMAN = Background client for authorization check
    EVENTID = Background Processing Event
    EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
    Dear Juan,
    Thanks for your reply.
    Regards,
    Kent

  • Bank details check during creation of vendor master

    Hi,
    I'm sharing the same vendor account group for local and overseas vendor.
    For overseas vendor , bank details is a requirement field that user has to fill.
    But for local vendor, bank details is optional information.
    How to do this ?
    Thanks,
    Melissa

    Hi,
    Thanks for reply..
    1. To prevent human error, I would like SAP to raise error message when bank details empty for overseas vendor. I don't think we can use solution no.1.
    2. The data is already in production, my project is not an implementation project. So I don't think I can change the account group for the existing data. And I don't think the user will accept to create new vendor code under new account group.
    I'm thinking to use user exit. Do you know any user exit I can use during saving vendor master data ?
    Another thing, just to make sure, can we use validation for this purpose ? as far as I know, validation only applicable for transactional data, not master data. Correct me if I'm wrong.
    Thanks,
    Melissa

  • Print requirement for PO

    We are previously using requiremnet 101 for "XNEU" and YNEU,etc..  MESSAGE TYPE.
    But now user want add extra validation on this .
    <b>We only want to create an output for condition type XNEU if the tracking number contains a value. The tracking number on the Pur. Order is stored in EKPO-BEDNR</b>
    so how go ahead regarding this.
    regards,
    srini..,

    Hi,
    Welcome to SDN club!!!
    Can you give some more details about your requirement? It will help you to get solution very fast.
    Do you want to validate whether a tracking number exists for the purchase order when just before taking print out?
    If the above is true, please provide us your transaction name.
    Thanks
    Ramakrishna

Maybe you are looking for

  • How Do I Stop the "Cellular Data is Turned Off..." Pop-up?

    RE:  "Cellular Data is Turned Off for..." pop-up on iOS 8.0.2 (iPhone 5s) I have set cellular data ON for some apps and OFF for others.  BY CHOICE.  So, I am suffering EVERY DAY with a pop-up telling me my "Cellular Data is Turned Off for..." for all

  • IPhone 5s can't imessage some iPhone numbers, only iCloud

    Proud user of apple devices for around 5 years, last week my iPhone 5s was not able to deliver an iMessage to an iPhone 5c, so it went as regular SMS text; and when I got a reply, it arrived from the iCloud id.  Then, the exact same thing happened on

  • Yoga 3 pro installing Windows 8.1 Pro

    Hi Everybody, Currently we are looking for some alternative for heavy H... Elite solutions for our mobile workers. We were interested in Yoga 3 PRO until I noticed that it is NOT distributed with Windows 8.1 PRO. The question is whether anybody did i

  • Sony NEX-5R ARW

    I recently bought a Sony NEX-5R but Aperure can´t view the RAW-files (.ARW). I know ARW is different for each camera, and the NEX-5R is new on the market, so I wonder if anyone know if Aperture supports it yet, or if the problem is on my local machin

  • BCP does not leave output file handle

    We are executing BCP utility to bulk load files into tables. The utility is spawned from dll (C# code) with following parameters Complete_Table_Name + " IN " + Input_File_Name + " -S" + Server_Name + " -U" + Username + " -P" + Dec_Password + " -c -C