Details regarding Portal users vs 8i DB users

Is there a good DBA level explanation of the differences between a PORTAL/SSO user and a normal database user?
It appears we have to set up new users in Portal for all of our existing users in the database (painful). This was not required in Webdb. Is there a way to import existing database users and link them to their existing schemas painlessly?
The bits and pieces I can find indicate that if you do go ahead and set up a new Portal user manually and link them to their own existing database user schema then the normal database objects roles and rights should appear. This does not seem to be true in 3.0.8 Portal. I created a portal user, assigned them to their existing 8.1.7 schema and:
1) the normal database objects they have rights to do NOT show up in the browse database objects. In Webdb 2.2. all of these objects show up fine. The ability to browse database objects was one of the good things about Webdb that we need to preserve.
2) try to create a portal component, a form, based on a table/view. Unlike #1 above I can in fact create the form on an existing table even though it does not show up in the browse above. The user has update rights to this table, but the form will NOT compile if I leave in the UPDATE, DELETE, INSERT buttons. What is going on?
Is there a technical paper that discusses exactly how to map db users to portal users and how to transfer rights, privileges etc. so we can make portal 3.0 as functional as webdb 2.2 was?

Quinn,
Here are my answers:
1) the normal database objects they have rights to do NOT show up in the browse database objects. In Webdb 2.2. all of these objects show up fine. The ability to browse database objects was one of the good things about Webdb that we need to preserve.
Ans))
You have better control on this ability now.
2) try to create a portal component, a form, based on a table/view. Unlike #1 above I can in fact create the form on an existing table even though it does not show up in the browse above. The user has update rights to this table, but the form will NOT compile if I leave in the UPDATE, DELETE, INSERT buttons. What is going on?
Ans))
The ability to create a component in Oracle Portal 3.0 no longer depends on whether the developer has privileges to build components in a schema, but instead on whether the developer has privileges to build a component in an application.
=====
Is there a technical paper that discusses exactly how to map db users to portal users and how to transfer rights, privileges etc. so we can make portal 3.0 as functional as webdb 2.2 was?
Ans))
Read the following help:
a) Migrating WebDb users to Oracle Portal.
b) What are schema and object privileges?
c) What are global privileges?
d) What's the difference between an Oracle Portal User & an Oracle Database User?
====================
Now the next question is..Where to find them?
Here are the location:
login > Navigator > Database Objects tab>
Click on "Grant Access" > Click on the context help.
Here under the related topics you will find:
(b). Click on it:
Again under the related topics you will find:
(a) & (d) (Both are same).
For (c):
login > Create a user > edit that user > click on "Privileges" tab > context help.
Hope this will clear your doubts...
Thanx,
Chetan.

Similar Messages

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Mapping of single Portal users to multiple backend user

Hello Experts,
It is possible to map single portal user to the multiple R/3 user? If yes, than what is procedure to achieve it?
I have a SAP Portal where some users have 2 user ID in ECC, but I need to in Portal the users have only one user ID and password. How can I do to these users can select between their 2 profiles in ECC? Is posible?
Thanks!
Regards

Hi,
This is not possible since you would have used SSO to connect to the Backend. Either it is SSO or User Mapping is done, Portal User can only access the Backend with one User ID.
If you use SSO, for Example if the Portal User is UserA then you would have the UserA in the Backend too. It will use the UserA in backend to access. (Note: Single User can't access multiple Backend. Since we would have already maintained the Backend Connection details in the System and also in JCo Destination. So it is not possible for a User to access the Backend with two different Backends)
If you use User Mapping, then you can decide the User which it should use. (For ESS/MSS this is not recommended and it is not feasible too).
Regards,
Baskar.N

Portal installation: Domain or Local user?

If you're reading this and running EP 6.0, can you please check how it's installed at your site? Is it running under a domain user (e.g., US\prdadm) or a Local user (e.g., <SERVERNAME>\prdadm).
I was recently advised to install Portal using a Local user, not a Domain user.
I understand the reasoning, and I trust the person who said it, but it's just awkward - I've never seen a production SAP system running (successfully) under a Local account before. But perhaps Portal is unique in the way it handles cross-domain authentication.
And do you have cross-domain traffic? For example, your portal server might be on the "US" domain but an R/3 database is on the "SAP" domain, can your users successfully logon to the R/3 system via the Portal? Was any special saprouter or network config needed to get it working?

Jason,
NW04 (latest SP) supports cross domain traffice.
Please refer to the procedure steps detailed in the SAPHELP link below & confirm you've followed & implemented them accordingly:
"Configuring SAP Logon Tickets for Multiple Domains"
http://help.sap.com/saphelp_nw04/helpdata/en/e0/fa984050a13354e10000000a1550b0/content.htm
Via J2EE Visual Admin Tool to edit the
UME property "ume.login.mdc.hosts" may also be used, if this is what you desire with your installation.
Global server config -> services -> com.sap.security.core.ume.services
Regards,
James

Portal: Password reset and unlock User via UME?

I'm new to Portal and SAP. I'm trying to find options to have a username unlocked and password sent to user based on a userid from our Portal logon page.
The end user needs only to know their user ID, and based on this user ID I need their username to be unlocked, and a temporary password to be emailed to them (Looked up from their user ID via Database)
From what I've been reading UME can do this, but when I look into configuration of it I'm not seeing anything that can define this to show up on the Portal logon page. Does this have to be developed and built in or linked as a separate page or is there a prefab one made already(nothing I could find showed evidence of this, although the documentation regarding UME hinted at this)?
The end user doesn't need to answer security questions because to get access to the portal they already have to be on my secured network.
Any help would be great!
Edited by: Andrew Urban on Aug 7, 2008 12:09 AM
Edited by: Andrew Urban on Aug 7, 2008 12:10 AM
Edited by: Andrew Urban on Aug 7, 2008 12:16 AM

Andrew,
This link might help explain what is possible with SAP Portal in terms of allowing the user to reset their password from the logon screen.
http://help.sap.com/saphelp_nw04s/helpdata/en/45/7e6313d8780dece10000000a11466f/frameset.htm
As for allowing a user to unlock their account from the logon page, there is no such functionality that I know of. This would need to be developed. We are doing something similar. In our case, we are developing a module that allows user to retreive their user ID if they forget it. This also is not functionality that SAP provides. The user can specify their email address, and it emails them their user ID. This is being developed in Web Dynpro for Java utilizing the UME APIs.
- Andrew Castillo

Reusing the 'Row Text Details' system form (Form 65088) in a User Defined F

Hi Experts,
Is there any way by which we can reuse the form 'Row Text Details' -system form (no 65088) in a user defined form.
This window pops up to accept a large text when we change the 'Type' to 'Text' in marketing document line Items -Order/Invoice etc.
I found the code to invoke forms related to a menu but which is not useful in this case.
Thanks in advance
Regards
Ajith G

Hello,
This is not possible, you should create an addon for this functionality.
Regards,
J

Allow Other Users To Edit The User Portal

HI all,
Is it possible to allow another user to modify my User Portal without making them a full Admin?
Out HR Dept. would like a tab for their content and would like to edit it themselves.
I'm not keen as they would probably hose the entire site.
Any ideas if this can done?
Regards
Colin
This topic first appeared in the Spiceworks Community

Hi - I believe the issue is related to java versions. I experienced the exact same problem, and the issue was removed.
Several small issues in Java Report Panel with unintended behavior is very often related to too old java versions.
BR
Jess

How to change the portal role presentation based on users BW authorization?

Hello,
I have created 3 BW Roles, each one contains an iView with a certain report.
For simplicity let's name the Roles A,B,C and assume that in order to see the proper report the user needs to be assigned to the matching group (A,B,C) at the BW side.
I have imported these 3 roles to the portal as worksets, created new pcd role, placed these 3 worksets inside the new role and assigned this role to a certain group of users in the portal (these users are ABAP users so they are the same at the BW side as well).
What I would like to do is this: I would like that each user that I have assigned this new role to will see only the worksets that he/she allowed to see based on it's BW authorization. Meaning, if I have been assigned roles A and B at the BW I will see only worksets A and B inside the role.
The problem is this: From the portal I cannot assign the users to the BW groups and from BW I cannot control pcd roles so this kind of change requires me to make two modifications: One for authorization from the BW and one for presentation from the portal. I would like to manage it just from one place, either from the BW or from the portal, I don't care.
How can I achieve this?

I think I have found a solution: Export it as a role instead of a workset and do one to one assignments with the BW groups.

Confused regarding v$session shows 'sys' in 'user' field for scott,

hi all,
new to oracle, little confused about why v$session view shows 'sys' in 'user' field for scott user connected, while user# shows id of scott and schema is also of scott is being used.
i am using oracle 9i on a rhel3, logged in(client: sqlplus, db user: scott) from the same os user 'oracle' used by sys on a standalone test machine.
regards,
rishi

why v$session view shows 'sys' in 'user' field for scott userPlease be more specific: There is no column »user« in v$session view. Are you actually refering to username column?

Need help understanding OID basics regarding portal

Hi I am new to v2 portal and OID and need some help.
Because all portal users are oid users, currently default settings are in place. My issues are follows:-
Q1 Portal user passwords are expiring after a few weeks, how do I reset the expiration time for portal user passwords.
Is using the OID Manager (Java client app) the only way and how do you do it?
Q2. My understanding is that the OID contains all policy details regarding user access.
How does OID map to portal so that portal uses use a particular OID, as portal v2 is install out of the box this is already done for me, an explanation would be very helpful.
Thanks in anticipation
SD.

I'm no expert, but a command that weeds out some the local stuff would have beennetstat -af inet
Most of those listings are local system sockets, and look fairly normal (with that command, my machine has about the same number of entries). Any given browsing session will open all kinds of temporary connections that eventually time out, and by closing Safari most of them should eventually close.
Netstat will show a bunch of stuff, not necessarily limited to the internet. You can also use the *Activity Monitor* application, and another useful tool is MenuMeters - I still use it to keep track of network and disk activity. Are there other machines on your network (or cable node)? With a 25mbit connection, you would need to be running a lot of stuff to slow it down.

User Exit to update user status at VA01/VA02

Hi Expert
Please help identify any User Exit to update User Status stored in tables (JSTO/JEST), at time of sales order (Business Object 2032) creation / change.
Requirement is to set check mark on a specific user status in case of a material master is missing HTS code.
Regards-Aamir

Hi,
If your requirement is to set the check the HTS field in the material master, you can make the field as Mandatory without which the Material cant be saved
You can make this field mandatory in OMS9 transaction code with field status as 89 and the field is MARC-STAWN
Please revert if you need more details
regards,
santosh

Error in the ISA User Admin to create users

Hi all
i am not able to create the users thru the ISA user admin. while creating the user for new contact persons we are getting the error as " User Does not Exist" and also while creating the user for existing contact persons we are getting error as " User already Exists". in our project landscape CUA also part along with CRM and Portal. i am not able to find out from where exactly we are getting the error either from CRM side or else from CUA side.
Regards
suresh babu

Hi,
You can open any process in an iview which is assigned to a page and to a role. Once you click on this role, the process will get initiated and the webdynpro application will be displayed.
If you open the instantiating url, it will ask for the input parameters that are to be passed to the application and initiates the application. It does not display your webdynpro page.
For the iview you have created, Assign this iview to a page, and then assign it to a role. Assign the role to your user id and then open the role. Also mention in the iview parameters if any role based information has to be passed.
Award points if helpful.
Regards,
Sujana

How can I stop authenticated users from getting other user's information?

We recently discovered that it is possible for authenticated users, via KMu2019s details view, to view details about the other users that have access to the same resource as you. Our portal (7.0 sp15) is used for an external facing web site. We have secured it against anonymous users but the problem still remains for authenticated users. Here is an example:
The KM folder documents\Public Documents has been assigned read permissions for the group Everyone. An authenticated user can open the URL https://<host>/irj/go/km/navigation/documents/Public%20Documents and a list of folders are shown. The user can then select the Details from the menu for one of the folders and the Details iview is displayed. They then select the menu item Settings > Permissions and the users/groups/roles assigned to this folder are shown. The user can then select a user and view that users name and email address or the user could select a group and view for each member of the group the user id, name, and email address which could then be used to help attack the site.
So I thought it would be easy enough to disable the details view for all users but content managers or administrators but I seem to running into difficulty.
I tried disabling the Details KM command with limited success. Even with it disabled, if you know the URL for the details component you can still access it. So it seems the better option is to take away access to the details component. It seems that the users are getting access to the Details iView from the standard eu_role. If I remove the iView from this role then all user have no access to the Details in KM. I tried to add the iView to another role that content managers would have but when logged in with a user that had that other role I still was not able to access the Details iView.
This SAP Help document [http://help.sap.com/saphelp_nw70/helpdata/en/47/f0f7415e639c39e10000000a155106/frameset.htm |http://help.sap.com/saphelp_nw70/helpdata/en/47/f0f7415e639c39e10000000a155106/frameset.htm ]discusses the eu_role(Standard User role) and it states that
By default, the Everyone group is assigned to the Standard User role. If you choose to use the other every user roles instead, you need to remove these assignments from the Standard User role and apply them to the Every User Core and Control Center User roles.
But, when I look at what groups the role is assigned to or what roles are assigned to the Everyone group they donu2019t appear to be linked contrary to what the documentation says. So, what Iu2019m thinking here is that I can create a copy of this role and remove the Details iView from the original and then assign the copy to the content managers and administrators. Doing this causes all users to lose access, even the content managers.
I thought Iu2019d give the Security Zones a try to see if this could help me but when I take away rights from here it still allows access.
Iu2019m stumped. Iu2019m sure there is some key piece that eludes me. What can I do to allow users read only access to some KM folders and files while preventing them from viewing the permission/user details?

The only 3d party apps are Hazel...
And that's your problem!
From the Hazel site's description:
Hazel watches whatever folders you tell it to, automatically organizing your files according to the rules you create.
Hazel, is a prefPane so you must have some rule (or it supplied the rule as a default) to put pictures (jpg's) from your Desktop (folder) into your Pictures folder.
Open your System Preferences and Hazel in there and either turn off Hazel or change or delete the appropriate rule covering this situation.

Trusted RFC not working for different user , working for same user

Dear All,
I have two SAP system - One Solman (7.0) and another ECC 6.0 (SR3) on HPUX box with Oracle DB (Unicode).
I want to establish Trust relationship between these system.
I have configured the same, as per the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm
and note 128447.
My requirement is one user X in solman client 001,
will execute some test plan (Tcode stwb_2) which will take the control to ECC 6.0 client 200, execute the tcode as user Y and come back in Solman again.
The user X (SAP_ALL) exists in Solman - client 001 and user Y (SAP_ALL) exists in ECC 6.0 - client 200.
In ECC 6.0 client 200, I have created a role ZRFCACL with the following and assigned to the user Y (as per the above help / note):
Role : ZRFCACL
Auth. Obj: S_RFCACL
Value assigned to fields are:
     RFC_SYSID : SOL
     RFC_CLIENT: 001
     RFC_USER : X
     RFC_EQUSER: N
     RFC_TCODE : *
     RFC_INFO : *
     ACTVT     : 16
Whenever the user X is trying to execute the test from solman, he is getting the error : "No authorization to log on as trusted system (RC = 0)"
Each time the user is trying the above, in ECC 6.0, the following dump is occuring:
CALL_FUNCTION_SINGLE_LOGIN_REJ under username SAPSYS
I have assigned the role ZRFCACL to user X in Solman also.
Next, I have performed the following check:
created one user M in both system
created the role ZRFCACL2 in ECC 6.0 client 200 as follows and assigned the role to user M:
     Role : ZRFCACL2
     Auth. Obj: S_RFCACL
     Value assigned to fields are:
          RFC_SYSID : SOL
          RFC_CLIENT: 001
          RFC_USER : ''
          RFC_EQUSER: Y
          RFC_TCODE : *
          RFC_INFO : *
          ACTVT     : 16
Assigned SAP_ALL to user M in both system (So the user M in Solman does not have ZRFCACL2).
This time, the trust relationship worked and no dump got generated.
I have also checked the thread Trusted RFC do not work
but unable to resolve the issue.
Any suggestion where the things are going wrong in this / what else I need to check or this is not possible at all?
Thanks in advance for your help.
Sudip

Hi Valdecir,
Thanks for the reply. I am providing the detail of the generated dump below:
Please check in case any clue is there.
Runtime Errors         CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time          12.08.2008 18:59:32
Short text
No authorization to logon as trusted system (Trusted RC=0).
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An RFC call (Remote Function Call) was sent with the invalid user ID "98819 "
. Or the calling system is not registered as trusted system in the
target system.
How to correct the error
The error code of the trusted system was 0.
Meaning:
0    Correct logon as trusted system mode
1 No trusted system entry for the calling system "SOL " or the
security key entry for the system "SOL " is invalid
2 User "98819 " does not have RFC authorization (authorization object
(S_RFCACL) for user "98819 " witl client 001.
3    The timestamp of the logon data is invalid
The error code of the SAP logon procedure was 1.
Meaning:
0    Login was correct
1    Wrong password or invalid user ID
2    Locked user
3    Too many attempted logons
5    Error in the authorization buffer (internal error)
6    No external user check
7    Invalid user type
System environment
SAP-Release 700
Application server... "gcbeccd"
Network address...... "10.10.4.158"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "gcbeccd"
Database type..... "ORACLE"
Database name..... "RD3"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 5 2008 00:55:24"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1194640
MM Free. 2992576
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "489F2BD6C36D0F12E10000000A0A049E"
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "SOL"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. 001
User................ 98819
Transaction......... "SMSY"
Call Program........."SAPLSRTT"
Function Module..... "SCCR_GET_RELEASE_NR"
Call Destination.... "SM_RD3CLNT200_TRUSTED"
Source Server....... "gcbsolm_SOL_00"
Source IP Address... "10.10.4.206"
Additional information on RFC logon:
Trusted Relationship "X"
Logon Return Code... 1
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "SAPMSSY1".
Source Code Extract
Line
SourceCde
37
endmodule.
38
39
module %_rfcdia_call output.
40
"Do not display screen !
41
call 'DY_INVISIBLE_SCREEN'.
42
perform remote_function_diacall.
43
endmodule.
44
45
module %_cpic_start.
46
if sy-xprog(4) = '%RFC'.
47
perform remote_function_call using rfctype_external_cpic.
48
else.
49
call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50
perform cpic_call using convid.
51
endif.
52
endmodule.
53
54
55
form cpic_call using convid type c.
56
communication send id convid buffer header.
57
if sy-subrc eq 0.
58
perform (sy-xform) in program (sy-xprog).
59
else.
60
message a800.
61
endif.
62
endform.
63
64
form remote_function_call using value(type).
65
data rc type i value 0.
66
do.
>>>>>
call 'RfcImport' id 'Type' field type.
68
if sy-xprog = 'JAVA'.
69
system-call plugin
70
id 'JAVA' value 'FORW_JAVA'
71
id 'RC'   value rc.
72
if there is no rollout on the JAVA side which
73
rolls both, JAVA and ABAP, we return to the
74
C-Stack and reach this point
75
76
in case there was an rollout, the ABAP-C stack is lost
77
and we jump direkt to this point
78
79
here we trigger the rollout on this Abap side with
80
the following statement
81
system-call plugin
82
id 'JAVA' value 'ROLL_OUT'
83
id 'RC'   value rc.
84
else.
85
perform (sy-xform) in program (sy-xprog).
86
rsyn >scont sysc 00011111 0.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080812
SY-UZEIT
185932
SY-XPROG
SAPRFCSL
SY-XFORM
READ_SINGLE_LOGIN_DATA
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
2 FORM         SAPMSSY1                            SAPMSSY1                               67
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.       2 Ty.          FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
0000
0000
2222
0000
SY-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
0003
SY-XPROG
SAPRFCSL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455445422222222222222222222222222222222
3102633C00000000000000000000000000000000
%_ARCHIVE
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
READ_SINGLE_LOGIN_DATA
000000000000000000000000000000
000000000000000000000000000000
544455444445444445445422222222
2514F39E7C5FCF79EF414100000000
%_SPACE
0
0
2
0
No.       1 Ty.          MODULE (PBO)
Name %_RFC_START
%_PRINT
000                                                                                0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination was triggered in function "ab_xsignon"
of the SAP kernel, in line 2491 of the module
"//bas/700_REL/src/krn/rfc/absignon.c#9".
The internal operation just processed is "CALY".
Internal mode was started at 20080812185932.
Calling system.....: "SOL "
Caller.............: "98819 "
Calling client.....: 001
RFC user ID........: "98819 "
RFC client.........: 200
Trusted return code: 0
Logon return code..: 1
Transaction code...: "SMSY "
Active state.......: "-782823270"
Note: At releases < 4.0, the information for the caller is not
available.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(0) 0x4000000003b2b450 CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
(1) 0x4000000004d2c470 Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
(2) 0x4000000004d32160 ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
(3) 0x4000000002b43cb0 SignOnDumpInfo + 0x280 at absignon.c:2491 [dw.sapRD3_DVEBMGS00]
(4) 0x4000000002b3f2f0 ab_xsignon + 0xb30 at absignon.c:876 [dw.sapRD3_DVEBMGS00]
(5) 0x4000000002aa4cb0 ab_rfcimport + 0x1ad0 at abrfcfun.c:3599 [dw.sapRD3_DVEBMGS00]
(6) 0x40000000040f4a80 Z8abjcalyv + 0x500 [dw.sapRD3_DVEBMGS00]
(7) 0x400000000402f190 Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
(8) 0x4000000003f538b0 Z9abxeventPKt + 0xb0 at abrunt1.c:281 [dw.sapRD3_DVEBMGS00]
(9) 0x4000000003f360a0 ab_dstep + 0x280 [dw.sapRD3_DVEBMGS00]
(10) 0x4000000001cb4600 dynpmcal + 0x900 at dymainstp.c:2399 [dw.sapRD3_DVEBMGS00]
(11) 0x4000000001cab0e0 dynppbo0 + 0x280 at dymainstp.c:540 [dw.sapRD3_DVEBMGS00]
(12) 0x4000000001cb1ec0 dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
(13) 0x4000000001c9dff0 dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
(14) 0x4000000001fea460 Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
(15) 0x4000000001fb4de0 TskhLoop + 0x4e20 at thxxhead.c:4518 [dw.sapRD3_DVEBMGS00]
(16) 0x4000000001faae40 ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
(17) 0x4000000001569ec0 DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
(18) 0x4000000002c10630 nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
(19) 0x4000000002c105c0 main + 0x60 [dw.sapRD3_DVEBMGS00]
(20) 0xc00000000002be30 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
11.04.2005
09:27:15
22528
E
1
Prg
SAPLSCCA
1
05.07.2005
13:10:18
52224
E
2
Prg
SAPRFCSL
0
13.02.2005
17:31:45
17408
E
3
Typ
RFCSYSACL
0
13.02.2005
17:31:45
7168
4
Typ
SYST
0
09.09.2004
14:18:12
31744
Directory of Application Tables
Name                                     Date       Time       Lngth
Val.
Program SAPMSSY1
SYST                                       . .       : :     00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0\0
Program SAPRFCSL
RFCSYSACL                                  . .       : :     00001760
SOL                             RD3
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
116
CLEA
00
0035
SAPMSSY1
60
117
CLEA
00
0036
SAPMSSY1
60
118
CLEA
00
0037
SAPMSSY1
60
119
MESS
00
001C
SAPMSSY1
60
120
ENDF
00
0000
SAPMSSY1
62
121
00
0000
SAPMSSY1
62
122
PERP
00
0001
SAPMSSY1
64
123
PERP
02
0000
SAPMSSY1
64
124
WHIL
00
0002
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
128
WHIL
00
0003
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
132
BRAN
05
001E
SAPMSSY1
66
133
CALY
00
0003
0038
002A
0005
002B
0000
0000
SAPMSSY1
67
>>>>>
CALY
02
0000
0039
8000
0000
0000
0000
0000
SAPMSSY1
67
141
COMP
00
0002
0010
003A
SAPMSSY1
68
143
BRAF
02
000E
SAPMSSY1
68
144
SRFC
01
0000
003A
003B
SAPMSSY1
69
146
SRFC
01
0000
003C
C000
SAPMSSY1
69
148
SRFC
02
0000
0000
0000
SAPMSSY1
69
150
SRFC
01
0000
003A
003D
SAPMSSY1
81
152
SRFC
01
0000
003C
C000
SAPMSSY1
81
Thanks & Regards
Sudip

Whether a User can have ESS User ID but no R/3 ID

Dear All,
Can U Plz Let Me Know whether a User can Have an ESS User ID but no R/3 ID and in Such a Scenario how would the integration happen between ESS and R/3.Also in Such a Scenarios What Would be the Effect on ESS Licences and R/3 Licences.
Thanks & Regards,
Punam Jha

Punam, yes, you could manage Portal's Users by using windows users (i mean from Active Directory) or even maintain directly in Portal (Portal Users).
But, in order to work with information from your ERP about an employee, you need to do any mapping with SAP.
You could do a mapping against SAP with a different user that your Portal user (i mean with different name), by storing the user ID for the ABAP backend system in the user properties.
[Check this link: User Mapping|http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/frameset.htm]
Also, i suggest you talk with your Basis the possibility of mappping multiple users to one (i never test this workaround, so be carefully in the tests), but also you must talk with your SAP Agent to ensure you're using the correct number and type of licenses.
Best regards

Details regarding Portal users vs 8i DB users

Similar Messages

Maybe you are looking for