Detect if text was clipped

Hi!
When we set lineBreak to explicit in a multiline label, is there any way to check if the text was clipped or extends past the right edge?
Thanks

Spark label.
Where can I find the function that breaks the string in multiple text blocks? Is there any var that has info how the text was breaked: which text is in every line?
Thanks.
Message was edited by: luisborlido

Similar Messages

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Text in 4b5 is somewhat blurry on most sites; text was clear in 4b4 and earlier. How can I fix this?

http://imgur.com/av4aa.png
On the left is FF 4b5, with slightly blurry text on Lifehacker. On the right is Chrome 6.0.472.59 beta, without the blurry text.
I should note that the blurry text was not an issue in FF 4b4 or earlier.
I have also upgraded just now to 4b6, and the same issue is present.

This is caused by hardware acceleration. You can resort to the previous font rendering by turning off hardware acceleration. To do that open the options dialog (Click on the Firefox button, then select Options...), go to the Advanced panel then select the General tab, then de-select the setting to use hardware acceleration.

SSIS Error Text was truncated or one or more characters had no match in the target code page

I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH           ",
"EDWARDS             ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880    ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER              ",
"M",
"M",
"PBD $20/10+40%/20%            ",
00008.26,
"1184641367"

I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog!

What's the best way to detect that text fits into ContainerControllers without scrolling?

Hi.
Question
What's the best way to detect that text typed by user (or added programmatically) exceeds available container space and find out where starts truncated part? Is there available some other (than described bellow) easy way to detect it or disallow set of controllers to receive more characters that can be displayed in given composition area?
My partialy failed attempt (simplified)
For example lets say that I've got an editable textflow with attached two instances of ContainerController.
var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
    firstController = new ContainerController(firstSprite, 100, 30),
    lastController = new ContainerController(secondSprite, 600, 30);
flow.interactionManager = new EditManager(new UndoManager());
flow.flowComposer.addController(firstController);
flow.flowComposer.addController(lastController);
flow.flowComposer.updateAllControllers();
With enabled vertical scroll policy I can compare height of the composition in last controller with height of the content:
var bounds:Rectangle = lastController.getContentBounds(),
    overflow:Boolean = lastController.compositionHeight < bounds.height;
trace('Content does not fit into given area?', overflow)
But when I switch vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF) - unfortunately this no longer works...(In my case scrolling should be dissabled, since text areas might have only one line with restricted width)
Use case
I want to create fillable form. Field might have a single or multiple lines. One field might start in the middle of the page, continue in the next line where it spreads through whole page and end in the - quarter of page width long - third line. Text typed by the user can't exceed given area since it might cover some static text that sits right after/below field.
Something like ascii image bellow:
|                <PAGE>                    |
|                                          |
|                                          |
|                                          |
|               [Field starts here........ |
| ........................................ |
| ........................................ |
| Ends here..]                             |
|                                          |
|                                          |
| [Another field] xxxx xxxx xxxxxxxx x xx |
| xxxxxxxxxxxxxxxxxxx                      |
|                                          |
|                              [One more.. |
| .....]                                   |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
Info:
[......] <-- form fields starts with '[' character, and ends with ']'
xxx       <-- sample, static text
| and _   <-- page borders

I've tried something like that previously, but it didn't work because then I've got vertical scroll policy to set to 'auto'. After changing verticalScrollPolicy to ScrollPolicy.OFF in the last container it worked like a charm.
Thanks zhen bian

How to get the result of auto detecting of text-encoding in HTML component.

Hello.
I just run in to the wall.
I've hard that a HTML component automatcally detect the text-encoding of a HTML page loaded,
and it supposed to be detected through Binary data of its HTML source code.
I wonder, if there is any variable or function to get the detected text-encoding like UTF-8, iso-8859-1 or something like that.
I'm glad for any response.
thanks.

There is TEXT_IO package in forms. For more help use the Oracle Form specific forum.

I have a scanned doc that I copied onto a word doc. the scanned document text was crooked. I want to straighten the text. How do I do that

I have a scanned doc that I copied onto a word doc. the scanned document text was crooked. I want to straighten the text. How do I do that

If it is an image you could simply click on the image in word and then use the green dot that appears above the image to simply drag and rotate the image around. Alternatively, import it into iPhoto and use the rotation capabilities in that, click edit and then quick fixes and rotate. (Then export back into word).

How to detect overflowed text?

Hello,
I'd like to programatically detect overflowed text (ie. text which is not visible in its entirety). In reference guide I found that it should work be obtaining FP_Overflowed property of FO_SubCol, but it doesn't work for me. Here's sample document:
http://twoflower.matfyz.cz/inc/overflow_text.fm
How can I detect it properly?
Thank you.

Hi Stanislav...
I've used the following code to detect an overflow ..
F_ObjHandleT pageId = F_ApiGetId(FV_SessionId, docId, FP_FirstBodyPageInDoc);
while (pageId) {
F_ObjHandleT pageFrameId = F_ApiGetId(docId, pageId, FP_PageFrame);
F_ObjHandleT frameId = F_ApiGetId(docId, pageFrameId, FP_FirstGraphicInFrame);
F_ObjHandleT subcolId = F_ApiGetId(docId, frameId, FP_LastSubCol);
F_Printf(NULL, "pageFrameId %d; frameId %d; subcolId %d\n", pageFrameId, frameId, subcolId);
if (F_ApiGetInt(docId, subcolId, FP_Overflowed) == True) {
// do something
pageId = F_ApiGetId(docId, pageId, FP_PageNext);
When I run this on your file, it appears that your small overflowed textframe has no subcols, thus no place to check for the FP_Overflowed property. I'm not sure exactly why there would be no subcols (an Esc,g,o shows that it has one column .. ??).
Good luck,
...scott

How to detect when 2 movie clips have been clicked?

Hello:
I'd like to know how can I detect when 2 movie clips have been clicked (irregardles of the order).
What I have is this:
In my main timeline I have 2 independent movie clips (mc_him and mc_her) each in it's own layer that, when clicked, play an internal animation without moving my main playhead anywhere. What I need to do is, once they are both clicked (as I said, it doesen't matter in what order), a button that sends me to another section of my movie has to appear. It really doesen't matter if the button shows by enabling it with alpha or by sending me to a specific frame where my button lies. What I need to detect is both clicks so that the button shows up.
How can I achieve this?
Thank you very much.

btn1.onRelease=function(){
// do whatever
this.clicked = true;
checkBothClickedF();
btn2.onRelease=function(){
// do whatever
this.clicked = true;
checkBothClickedF();
function checkBothClickedF():Void{
if(btn1.clicked&&btn2.clicked){
// do something. both clicked
// reset both clicked properties?

My ipod nano was clipped to a tee-shirt and run through the wash cycle. Is there any hope for it working again. It won't turn on or appear to take a charge.

My ipod nano was clipped to a teeshirt and ran through the wash/rinse cycle. It doesn't turn on or take a charge. Any chance of it working again?

iPod Repair Tutorials

HT3529 When texting from my iphone 5, I was able to see when the text was delivered and when it was read. An Apple Genius reset my iphone, and now I cannot see when the text was delivered or read. Any suggestions?

When sending a text, I was able to see when the text was delivered and when it was read, then an Apple Genius reset my phone and now I cannot see when the text was delivered or read.
Any suggestions?

Look in settings - message.

Detecting white text knockout

Hi all!
I have a question for you. I want to detect white text that doesn't knock out. I already detect overprinting when the text is black, and less then 12px.
Now I think by detecting white text, with OPM set to 1 and OP set to true, that's knockout, right?
The thing is, I have an PDF here that's fully GWG 1.3 certiefied, but I still detect that there is white text that doesn't knockout.
Is there an way to detect if an ExtGState is used or not? Because, if I'm searching an ExtGState that isn't used.... That's just pointless...
Can someone help me?

Sorry about that. I'm currently working on an in houde developed API, that parses an PDF. I think now were're checking for knock out to soon in the procces... How can we check if I have read all ExtGStates (and set them active if that must be done...) that there's knock out? op = true, and OPM is 1?
Of course we check fist if the text color is 0 0 0 0....

HT4641 Hello there i am using the latest version of pages but when I imported a word do.ument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anybody

Hello there i am using the latest version of pages on ipad3 but when I imported a word doument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anyone help.
Thanks

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Text was truncated

Hello,
I trying to import data from Oracle to SQL Server , and I have an issue with decimal places.
In Oracle I have a number with 36 decimal places, when I trying to bring it to SQL(load to the table) , SQL thinks that it's a nvarchar(38) and still have an error:
Text was truncated or one or more characters had no match in the target code page.
Number looks like that:
73.865092402464065708418891170431211499
Please advise , what I should do in SSIS so it going to work
Thanks

With the . the number of chars is 39 not 38 so it breaks.
You have to make it longer the NVARCHAR, but ideally why not it could be numeric
Arthur
MyBlog
Twitter

Detect if text was clipped

Similar Messages

Maybe you are looking for