Detecting if native iPhone application is installed on phone from a web app
Hi...
How can I detect if one particular iPhone native application is installed or not on th device from my web application...
So if installed then user can launch it or the link will take him to th store to download it...
Unfortunately, the only alternatives are to put all resources required by JAAS in jre/jre/lib/ext OR on the system classpath when the JVM is started.
This is apparently due to a bug in JAAS. The implementers of JAAS have the LoginContext written so that it loads resources only from the system classpath. Unless this was, for some reason intentional. I don't know what the plans are for JAAS going forward with respect to this.
Has it been fixed in J2SE 1.4?
I'll have you know this wreaks havoc with attempting to have your LoginModule use an EJBs to authenticate a user and add Principals to the Subject.
Similar Messages
-
I have an IPhone 4, and I wanted to reset it, but couldn't do it via computer because the "find my IPhone" was turned on. So I went to ICloud > Find My IPhone and just erased my phone from there. The was acting weird but I finally got to a black screen with the spinning circle. And it won't advance. I can't just hold the sleep button and home button down because my sleep button is broken! Any help? I have reset my phone before.
Hello cwypyski,
The link below provides information on and can also assist with setting up service for your iPhone to have your Sleep/Wake button repaired.
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&product=iphone
All my best,
Allen -
Hi,
I am writing to bring to your attention a serious issue I had with your product. My brother bought one iPhone 4, 16 gb mobile phone from US last year and gifted me in India. In few months it had a problem with its home key. I took the phone to service service center and they told me that your phone is having hardware problem and as the phone is under warranty cannot be replace in India. You can come back when this is out of warranty. Now few days back when i walk again to the service center they stated that this phone we cannot repair here in India because of this phone purchased from US.
This a total disgraceful service from such a big brand like apple.
I hope to hear back from you about this incident.
Sincerely,
Niranjan
<Personal Information Edited by Host>No iPhone has a international warranty. Warranty is valid only in
country of original purchase. Since iPhone was bought in the US,
you must return the iPhone to the US. That means you must personally bring
the iPhone to Apple in the US or send it to a friend/relative in the US for them
to take to Apple. After replacement, your friend can ship it back to you. Shipping
and insurance costs are your responsibility.
Apple does not accept international shipments for evaluation/repair
and will not ship replacements out of the country. -
Not able to install flash builder from creative cloud app
Not able to install flash builder from creative cloud app, please help me. When i am trying to install app, its redirecting to the Flash Builder landing page and where i can see download button. However, when i am trying to install, its not getting "INSTALL" option in CC App.
Please help me.Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
I can't install Flash Builder from the Web Premium suite, what should I do?
I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
Please advise as to what can be done to be able to download this specific program.
Thanks,
Sarah-Kayok,
so for the memory: it's 4 GB 1067 MHz DDR3 and when I click to
install the programs it says (Macintosh HD: 10,0 Go (459,5 Go
disponible).
As for the processor: it's 2.66 GHz Intel Core 2 Duo
Monitor resolution: 1920 x 1200
Le 12-02-28 à 17:35, Jeff A Wright a écrit :
Re: I can't install Flash Builder from the Web Premium suite, what
should I do?
created by Jeff A Wright in Downloading, Installing, Setting Up -
View the full discussion
We do still need more information such as how much memory you have,
resolution of your monitor, how much disk space you have free, which
processor are you using. I good guide is to look at the system
requirements and try to post for each of the items within the
requirements. The system requirements for Web Premium can be found
at http://www.adobe.com/products/creativesuite/web/tech-
specs.edu.html.
>
Also you can find this information within your System Profiler. The
easiest way to access the system profiler is to go to the Apple Menu
and select About this Mac. Once selected clicking on the more info
button will launch the System Profiler.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by
email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746 -
IPhone Application Frozen after waking up from Device Sleep
The iPhone application that I am currently working on is having a hard time running properly after the device is put to sleep. I've built other applications that work fine, but something seems to be wrong with this one.
After the device is woken up, it shows my user interface correctly, and I can see that other threads are running because I added log messages in a communication thread, but the UI is not responsive to any touches.
Anyone have any pointers on what to look into for why this is happening?
I've overridden the applicationWillResignActive and applicationDidBecomeActive methods in the application delegate to see what is getting called, but am not sure what to do once the application has become active again.
Thanks.No one's ever faced that?
I mean the iMac is brand new, upgraded from SL to Lion and this happened.
It's the iMac mid-2011, 21,5
2.5 Ghz Intel Core i5 - AMD Radeon HD 6750M 512 MB
Would you guys say it's a hardware issue, or rather a Lion issue? -
Installing Adobe Lightroom from Creative Cloud app
Hello,
I have a subscription for Adobe Photoshop CC and Adobe Lightroom. I've just successfuly installed Photoshop from Creative cloud app, though I can't find there the Lightroom. I installed a trial version of Lightroom from Adobe.com, use it in a trial mode because there is no way to activate it.
How can I deal with that?open lightroom > click help > activate
-
Hello Mac Friends!
Need some help here!
After installing 3 updates from the "software update" app today (June, 11th) my macbook doesn' t initialize anymore.
Is there someone who can help me fix this issue?
Why this is happening?
How can i fix it?
Wainting some feedback...Two places to start with that would have been better:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovery Mode
http://support.apple.com/kb/HT4718
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-cloner
If you have backups, if you can and saved your ML installer, you can start over.
Prevention and taking a more proactive approach to system maintenance and repair, rather than fixiing a problem (likely pre-existing?) format the drive or partition and reinstall 10.8.1 and restore from backups.
Never had any issues? freezing? apps crashing before? -
How to get maps on my native iPhone application
Hello,
I m working on an application where i need to display the complete map on the application. I dont have any idea abt this. Kindly let me know how can i get the map so that i can display it on my application. I m working on an iPhone simulator.
Thanx a lot in advance.Some people have had success loading Google Maps API with a UIWebView, and injecting javascript calls to control it. It's a stopgap approach to getting a Google Maps interface without quiting out of your app.
Have a look at Path Tracker in the AppStore.
If you don't mind switching away to the Google Maps API, you can always use a Map Link:
http://developer.apple.com/iphone/library/documentation/iPhone/Conceptual/iPhone OSProgrammingGuide/AppleApplicationsURLSchemes/chapter950_section_4.html#//appleref/doc/uid/TP40006513-SW5 -
Applications re-installed on phone mem - E71
Since I have found out that installing third party applications on the mem card causes many problems, I am gradually installing the same applications that I have on the phone memory whenever I find updates to those applications without first uninstalling the old ones on the mem card.
The new application installer finds the old one and asks whether I would like to reinstall it all the same. I say yes and it installs.
I would like to know what happens to the old apps on the mem card. Are there remainders that need to be cleaned up. Or do these application mobve entirely to the phone mem and nothing needs to be done. There are no problems with the functioning of the apps.
mgoksoyHow about checking resource folder of your memory card using some x,y,z, browser. IMO and based on my experience with S60 I think it is highly unlickly that it will remove them from memory card.
I have never faced any problem with two of my s60 phones when I installed the app on memory card. I installed apps on phone memory when they recommned it. Otherwise I prefer having phone memory free.
Thanks
Aditya -
I have wanted to program for a long time and now I have a mac I want to begin on the wright track. Which language should I start learning and what others will I need in the future? I started learning c++ awhile back but wasn't sure if it was the right language for iPhone development so stopped till I could afford a mac as I couldn't be an iPhone programmer without a mac anyway. Any advice to put me on the right track would be brilliant and much appreciated. Also I heard learning design is a major aspect, when should I learn this or should it just be picked up through learning a language. And I should add I don't want to go to college or university as I am doing this as something ontop of my full time job. Thanks
iPhone Developer Beginner Resource Guide
...and I hope you're still not using 10.4.11 - Snow Leopard is minimum now. -
IPhone stuck when updating new phone from 2.0.1 to 2.0.2
So I have downloaded and installed the latest iTunes.
Now it apprears my phone is stuck on 'restoring iphone software' and has been like this for about 2 hours.
I have also tried this on another computer with new iTunes installation. Should I bring the phone into an Apple Store or just keep trying?Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
Text messages sent from or to my iPhone do not appear on the Verizon Messanger web app.
iPhone text messages do not appear in the Verizon Messenger web ap. Any Ideas why this happens? All other text messages I can still receive!!!
If you are referring to iMessages, they won't show up in the Verizon Messages app since they don't go through Verizon's servers, they go through Apple's.
-
Safari iPhone can't play QT movies from certain web pages
I'm trying to reach QT movies from certain websites and I can't seem to get the streaming video to play in Safari on my iPhone.
When I click on the link, it opens a new page. I briefly get a Quicktime logo, then I get a "cannot play" icon (triangle with a stop symbol).
When I go through a regular browser, I can see the file is a .mov file. It seems to be a smallish file - about 2 minutes at 320x240 size? I don't know what the bit rate is.
Any help would be appreciated. Thanks!
By the way, I love my iPhone!At this time .Mov files are not compatible with the iPhone.
The website would need to re-encode their movie into an H.264 video
iPhone Video Specifications posted below
http://support.apple.com/specs/iphone/iPhone.html
Video
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per second, Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats -
How to install plug-in from my web server?
My intranet can't access internet.
I have downloaded the java plug-in.
I hope the other machine install it through
my web page. Just like it access the sun's
web page.
How do?
ThanksI download the jinstall-1_3_1_02.ini file from sun and change all URL from
http://java.sun.com/products/plugin/autodl/j2re-1_3_1_02-win.exe
http://java.sun.com/products/plugin/autodl/j2re-1_3_1_02-win-i.exe
to my URL like:
http://100.100.100.100/plugin/j2re-1_3_1_02-win-i.exe
Than I extract the jinstall-1_3_1_02-win.cab file and I get the two new files called:
jinstall-1_3_1_02.inf and jinstall.exe
In the jinstall-1_3_1_02.inf file I change the line from:
run=%EXTRACT_DIR%\jinstall.exe http://java.sun.com/products/plugin/autodl/jinstall-1_3_1_02.ini
to
run=%EXTRACT_DIR%\jinstall.exe http://100.100.100.100/plugin/jinstall-1_3_1_02.ini
I make a new jinstall-1_3_1_02-win.cab file with the new files in it and put it on the Server.
in the HTML file I change the codebase from:
codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_3_1_02-win.cab#Version=1,3,1,2">
to
codebase="http://100.100.100.100/plugin/jinstall-1_3_1_02-win.cab#Version=1,3,1,2">
I'll get a download window with a processbar but nothing happens.
Perhaps you will have more luck
regards
Markus
Maybe you are looking for
-
How One EP Portal will connect the 2 Different System(ECC Europe,China)
Hi Friends, I have one more doubt on Multi region Functionality. Here we are using single EP Portal. Depending up on user we are able to connect to the ECC System. Ex: Here we are using 2 ECC Systems( ECC Europe and ECC China). In Portal ECC Europe i
-
Dbms_metadata.get_ddl not working in 11g
Hi All, I need a quick help from you. Following is not working in 11g. dbms_metadata.get_ddl( 'MATERIALIZED_VIEW', Mview_name, owner ) It is throwing me an error saying the Materialized view does not exist, though its exist. Please let me know, what
-
Struts and non-english encodes
Hi there, I'm setting up a struts based site, I have trouble transefring Hebrew characters from the text box to another page for instance. At first I tried UTF8 ,when I didn't really understood how to work with that, I got back to my WINDOWS-1255 enc
-
Hi When I try to open my Multi instrument in the Environment, the list of patch names flashes on but won't stay open. Double clicking and holding down on the click keeps it open, but then I am unable to do any editing. Any suggestoions? Thanks gregg
-
Why personnel areas don't have date tied to them?
HI All, I wonder why PAs don't have date (duration) tied to them. Sometimes,it is necessary to have dates especially in cases when you some PAs are not used anymore. We could delimit those or something. We got many PAs like them and its hard to figur