Determine processor ids for virtual processors on the same phys. processor
Hi!
Is there an API to determine the processor ids of all virtual processors that belong to a physical processor (for example the cpu ids for all cores that are on one socket in a multi-core architecture)?
I'm looking for a solution especially for UltraSPARC and SPARC64 CPUs.
There is the command "psrinfo" which, when called with the arguments "-p -v" procuces an output like:
The UltraSPARC-IV+ physical processor has 2 virtual processors (0, 16)
The UltraSPARC-IV+ physical processor has 2 virtual processors (1, 17)
The UltraSPARC-IV+ physical processor has 2 virtual processors (2, 18)
The UltraSPARC-IV+ physical processor has 2 virtual processors (3, 19)
On this systems, processor ids 0 and 16 belong to the same socket, as well as 1 and 17 and so on. On larger systems (e.g. a SunFire6900), processor ids 0 and 512 are the ids of the two cores on the same socket, 1 and 513 and so on.
Is there any API that allows to determine this information, which virtual processor ids are ids for processors on the same physical processors?
Thanks,
Nick.
On recent versions of the OS, that information is exposed through 'kstat'. Look at the 'cpu_info' stuff. Each VP should have a 'core_id' as well. If two CPUs have the same core_id, then they're multi-threading cores exposed as multiple processors.
Then I think (but not as sure) that 'chip_id' is similar, but refers to packaging assembly and is similar to the information you're seeing on psrinfo.
Darren
Similar Messages
-
Error:Unable to determine data basis for virtual InfoCube.
Hi all,
I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using a transaction cube which is a copy of standard cube <b>0BCS_C10 - Consolidation (Company/Profit Center).</b> (Transaction cube).
When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction <b>RSRT</b> it is showing following errors.
1.Unable to determine data basis for virtual InfoCube.
2.Error reading the data of InfoProvider.
3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Will be thankful for suggestions.Hi Pankesh,
Thanks for the response..
Transaction cube contains data and characteristics of virtual cube are consistent.
I am trying to see the contents of the virtual cube in transaction <b>LISTCUBE</b>, there also its showing same errors.
How can I proceed now? -
I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Abort Could not determine a value for variable 0DAT from the authorizations
Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye... -
HT204053 My husband and I have separate apple IDs, how do we use the same iTunes account
My husband and I have separate apple IDs , how do we use the same iTunes account
You don't. Each ID is associated with a separate account. Each of you should maintain a separate user account on your computer so as to maintain separate iTunes Libraries. Do not sync your phone with your husbands account or Apple ID and vice-versa or your data will become inter-mixed or worse - deleted from the phone.
Try to understand that iDevices are intended for use by one person with one Apple ID, one iTunes Library, and one iTunes account. They are not multi-user devices. -
Can I run the currency translation for multiple years at the same time?
Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanksYou can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu -
i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guideYou can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.
-
Hi... I am running a dual core, Win7 64bit PC, with Firefox Regular and Nightly on it... I also have 32bit Win XP Virtual PC on the same PC with Regular Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ???
I assume that you have separate Profiles for the Release and Nightly installations.
https://support.mozilla.com/en-US/kb/What+is+Firefox+Sync
Add each Firefox Profile to your Sync account as a '''new device'''. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync -
Oracle XE on multiple virtual machines on the same physical machine?
hi,
does oracle's licensing for 11g express edition prohibit running XE databases on multiple virtual machines on the same physical machine? if not, does the machine have to be "hard partitioned" per oracle specifications (link below) to make it legal?
http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf
i found a similar question regarding 10g express edition in the forum (link below), but it doesn't seem like the question was ever definitively answered.
Oracle XE on multiple virtual machines on the same physical machine?
thanksI thought until I just checked that this was a clear cut no in that it specifies 'a single server'. Now I'm not sure as 'server' is an amibuous term. I at least know that as soon as you start giving developers access to theor own XE instance for dev/testing that there are many VM environments where you can't really know what physical macine your VM is running on to actually be able to tell if you had multiple XE instances running on a single 'Physical' server. I'm not sure the question has been answered by Oracle though.
-
ACE20 - Loadbalancing across 3 virtual servers sharing the same address
I have 3 virtual servers sharing the same IP, just using different ports.
192.168.1.1:8000 = server1
192.168.1.1:8001 = server2
192.168.1.1:8002 = server3
I would like to loadbalance across all 3 with the following probe, looking for the URL.
http://192.168.1.1:8000/index.php
http://192.168.1.1:8001/index.php
http://192.168.1.1:8002/index.php
The config I have in place doesn't seem to be working... I probably configured this entirely wrong... not sure.
I need to understand what I missed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
probe http WEB1-http-probe
interval 30
passdetect interval 5
request method get url /index.php
expect status 200 200
connection term forced
probe http WEB2-http-probe
interval 30
passdetect interval 5
request method get url /index.php
expect status 200 200
connection term forced
probe http WEB3-http-probe
interval 30
passdetect interval 5
request method get url /index.php
expect status 200 200
connection term forced
! RSERVER
rserver host 192.168.1.1-rs
ip address 192.168.1.1
inservice
! SERVERFARM
serverfarm host WEB-sf-HTTP
rserver 192.168.1.1-rs 8000
probe WEB1-http-probe
inservice
rserver 192.168.1.1-rs 8001
probe WEB2-http-probe
inservice
rserver 192.168.1.1-rs 8002
probe WEB3-http-probe
inservice
! STICKYGROUP
sticky ip-netmask 255.255.255.255 address source StickyGroup_WEB-HTTP
timeout 60
replicate sticky
serverfarm WEB-sf-HTTP
! CLASS-MAP
class-map match-any WEB-cm-HTTP
2 match virtual-address 192.168.200.1 tcp eq 80
! POLICY-MAP
policy-map type loadbalance first-match WEB-pm-HTTP
class class-default
serverfarm WEB-sf-HTTP
policy-map multi-match POLICY
class WEB-cm-HTTP
loadbalance vip inservice
loadbalance policy WEB-pm-HTTP
loadbalance vip icmp-reply active
When I check the status of the RSERVER, the probes all indicate "FAIL"Found my problem...
I failed to put in the "port" statement under the probe.
After doing this and then verifying the RSERVER status, all the probes now show as OPERATIONAL.
probe http WEB1-http-probe
port 8000 -
HT1660 how can I use one single library for all users on the same laptop?
how can I use one single library for all users on the same laptop?
You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library. -
Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! ThanksHi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer -
Can you run multiple APEX listeners for different instances on the same server
Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TXYes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX -
Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?
Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe -
I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?
If all you want is an additional email address you can create up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.
Maybe you are looking for
-
A Suggestion for Skype to consider regarding the T...
Hello, I have a suggestion for Skype. When I look at my "Purchase History" in my Skype account it no longer shows the time my order was placed. Not having this information makes it difficult managing my subscription. I would like to see Skype include
-
Hi All, We had submitted PR 111111 back in February. It showed up in the buyer's queue and he generated the PO. Since then it has shown up two more times. We need to stop this . Please help me how to fix this. Thanks.
-
When I open the iPad Mini, immediately a "Sign in to Facetime" message pops up, along with a keyboard. If I 'cancel' it pops back within a second or so. I cannot do anything on the Mini now. What happened? (I have never used Facetime.) The only 'odd'
-
Mac OS X v10.6 Snow Leopard
Is it Safe? I use a MacBook Pro 15" 2.8 GHz Intel Core 2 Duo running Mac OS X 10.5.8 with primary software being Adobe CS4 I have an OS X Snow Leopard upgrade DVD but yet to install due to known issues We have recently purchased an upgrade to Adobe C
-
Policy based routing on a Layer 3 switch
I am doing some lab testing on policy based routing. I am having some issues that I can't see to get working right. Here is the config: ip local policy route-map Test-map ip access-list extended icmp permit icmp 192.168.1.0 0.0.0.255 192.168.200.0 0.