Dev Env Setup for Java Web Services

Where can I find some good documentation that clear shows how to setup CR Server XI2 and my Java dev environment so I can deploy and run the Java Web Services samples and do develoment of my own. I can only find bits and pieces about Java Web Services but so far cannot get anything to work.

The XI Release 2 Service Pack 2 Web Services Developer guide is found here:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2
/en/en/WS_SDK/wssdk_consumer/default.htm
Sincerely,
Ted Ueda

Similar Messages

Help on Sun Certified Developer for Java Web Services (CX-310-220) exam

Hi,
I am planing for Sun Certified Developer for Java Web Services (CX-310-220) certification. Can anyone provide me the links for resouces? can anyone provide me books/publications/author best preparation material to score good marks in exam? can anyone provide me the download resources available over internet?
thanks in advance..!!!
regards
gaveesha

yes, that's the only decent book covering most of the exam curiculum (but NOT all of it, check the exam specs versus the book content to know what you are missing).
I'm working on the same material, and boy is it a lot...
Dry, boring stuff most of it.

Sun Certified Developer for Java Web Services (CX-310-220)

Hello All,
I'm planning to study for Sun Certified Developer for Java Web Services (CX-310-220). I really appreciate any help in suggesting the books and the material requiered for the above certification.
Thanks,
Greeshma...

yes, that's the only decent book covering most of the exam curiculum (but NOT all of it, check the exam specs versus the book content to know what you are missing).
I'm working on the same material, and boy is it a lot...
Dry, boring stuff most of it.

I am planing for Sun Certified Developer for Java Web Services (CX-310-220)

Hi,
I am planing for Sun Certified Developer for Java Web Services (CX-310-220) certification. Can anyone please provide me the resources for preparation?
Can anyone suggest me which books/author/publications best helps me to get good results in exam? Any books/author/publications available over internet to download and prepare?
regards
gaveesha

yes, that's the only decent book covering most of the exam curiculum (but NOT all of it, check the exam specs versus the book content to know what you are missing).
I'm working on the same material, and boy is it a lot...
Dry, boring stuff most of it.

Good books for java web services

hi.. i want to learn java web services. can anyone pls tell me the good books or material if any to start with. I have exp in core java.

http://www.soabook.com/ The Good Book for modern web service development in Java.
http://www.amazon.com/J2EE-Web-Services-SOAP-JAX-RPC/dp/0321146182 The Bible about all things web services.
Get them both, use the first to learn and the second as a reference.

Security-role for java web services developed using j-developer 10.1.2.1

I have developed a java web service using j-developer 10.1.2.1, I have deployed this web service to oracle 10g (10.1.2.1) application server successfully. Now I want to add security-role to my web service deployment descriptor so that only a group of users that belong to a group can access my web service.
How can I do this? Can any one please let me know.
Thanks,
SC.

Hi.
I suspect you have a proxy server between your localhost and the
drive-app1.drivesoftwaresolutions.com
Probably in Jdev that proxy is setup nicely in Tools->Preferences->Web Browser and Proxy
But maybe your OC4J container running BPEL on localhost does not have that proxy setup.
You need to add startup parameters to the JVM. In 10.1.3 you can do this via the "AS Control" administration pages (there is a link on the SOA suite welcome page). Go to JVM, click on the container and switch to the "Administration" tab.
The properties are proxySet, proxyHost, proxyPort and nonProxyHosts
When deploying from JDev, the compilation in JDev works fine (uses the proxy). But when the JAR is transferred to the server, it is compiled again. This fails because the proxy is not used on the server side and it cannot read the wsdl.

Where is the wscompile utility for Java Web Services Developer Pack 2.0?

Hi. I am running Ubuntu Linux 7.04. I downloaded and installed tomcat 5.0 for WSDP and then WSDP 2.0. I did so because I am trying to use the wscompile utility to generate the WSDL and JAX-RPC mapping files so that I can create a simple example web service. (It doesn't seem like I should need the tomcat container for this, but the installation was prompting for a web container, so I supplied one).
My problem is that there is no wscompile file anywhere in the installation. I have read some other posts, and it seems as though the utility should be there. I looked inside the /jsdp-shared/bin directory of the installation, but there is nothing there.
I ran locate wscompile and find wscompile*, but nothing shows up. What am I doing wrong?
Thanks so much.

Just to clarify, when I said there is nothing in the /jsdp-shared/bin directory, I just meant that the wscompile utility that I am looking for is not there. There are multiple scripts in this directory. I also encountered no problems when I installed WSDP 2.0 via the gui screen.
Thanks.

Namespace Error when generating Client Proxy for Java Web Service

Hi.Experts:
    When I want to generating a Client Proxy for my WSDL file created by JAVA,it seems that some namespace errors occur.
    The error like this:
    "Incorrect value: Unknown Namespace http://sql.java
    Exception of class CX_SLIB "
   I checked all the SOAP runtime,it seems no error.So do I need to create the objects in the Integration Repository??If it is the truth,then how can I do it.
Best Regards
Martin Xie

Hi Martin
I didn't find this options in SAP GUI Create -->Enterprise Service ->Consumer Service ->url/http
Maybe my version is different.
You say that you can select the file ou url.
Did you select the file or url?
If was file, open this file, find the tag that you have the wrong namespace and eliminate this tag.
If was url, access this url, copy the xml and same in one file, then select this file in the step above.
I don't know if works, its only a suggestion.
regards
Marcos

Java Web Services Editor?

Hai there. I am new for Java Web Services.
Can anyone tell what editor that can I use to write the Java Web Services?
All the tutorial here are compile and run using dos environment.
Then what editor that I can use for writing the code?
Is that using jBuilder or else?

Hi,
You can use anything to write the web services. Even a notepad is good enough.
But if you have anything that can format and highlight xml tags/java source in different color scemes it might be better. A simple text editor is sufficient for you to get started with web services.
As for the examples and tutorial you can compile and run them in any environment. If ant scripts are used sometimes as newer version of ant is required to run a few task definitions which were not well suited for ant versions lower to 1.5.1
Hope these answer your query
Aviroop
MCSE
(Minesweeper Consultant & Solitaire Expert)

Sun Certified java Web Services Developer Certification

Hello,
Please suggest me book and online exam simulator so that i can prepare for Sun Certified java web Services Developer Certification (not Sun certified web component developer) for J2EE5 (not j2ee 1.4).
Please hekp me in this regards,
Meeraj

Hi
We have book for Java Web service exam.
Sun Certified Developer for Java Web Services Study Guide (Exam 310-220) Certification Press (Paperback) by Prasad Kukkamalla (Author), Jerome Josephraj (Author)
or
The below web site will cover entire syllabus
http://java.boot.by/wsd-guide
Thanks
Srivignesh

The Best Java Web Services Technology for Developing Web Services

Hi,
I am new to Web services world.
I read the java web services page . there are more than 6 technologies.
JAX-WS,
JAX-RPC,
JAXB,
SAAJ,
JAXP,
WSIT,
XWS-Security
I went through several documents on web services.
I could not get a clear idea of which technolgy to use.
Which Java web service technology will be the best to develop web services independant of language, platform.
or is there any 3rd party implemetations available ? for rapid development of web services.
Could anyone help me !.
Thanks in advance.
Message was edited by:
Siva.Prakash

Which Java web service technology will be the best
to develop web services independant of language,
platform.
Java by nature is a cross-platform language, so if your focus is on the need for portability, the choisce of WS should not be a problem. However, each WS is best suited for paricular uses.
SAAJ, a low-level level API, offers much simplicity, but is not the first choice for programmers, as SOAP (Simple Object Access Protocol)messages need to be constructed piece by piece, making it a quite arduous code to program.
If you are not familiar with XML, your best bet would be to use JAX-RPC (Java API for XML-Remote Procedure Calls), as it hides the underlying detail from the programmer, in terms of SOAP and XML. The shortcoming with RPC-based WS is that it is "restricted to the local programming experience". Another failing is that assumes there is a network path- a reliability concern.
If your program will be contacting other services during downtimes, unlike JAX-RPC, JAXM is quite useful. However, your listing did not mention it, so I wont cover it.
JAXR is a client-side only API that acts as an interface between registries (not referring to JAXP)
I am not famiiar with JAXB, JAXP, WSIT or XWS-Security..
or is there any 3rd party implemetations available ?It depends on what platform you are used to. Assuming you are familiarized with the J2EE platform (now changed to Java EE SDK), the NetBeans IDE (either 5.5, 5.5.1 or the latest editiion) is quite useful. I am using 5.5.1, but have found that it is quite buggy, especially when adding WS operations, a core requirement of a WS. if you will be using to devlop a service for an immediate need, you may find the learning curve to be a bit high, in terms of getting to grips with how to use it. (Download link:
http://www.netbeans.info/downloads/index.php)
The IBM Autonomic IDE (or AIDE), based on the WSDM standard, includes 3 sub-tools, icluding the IBM Manageability Endpoint Builder which, according to their website, allows individuals to build endpoints to allow manageability interface exposure; Manageable Resource Browser and the IBM Manageability Endpoint Simulator. However, I'm not familiar with this IDE. (Download link: http://www.alphaworks.ibm.com/tech/aide/download)
The .NET Framework uses the Visual Studio IDE. For an unbiased comparison of J2EE and the .NET Framework in terms of WS, see http://www.webservicesarchitect.com/content/articles/hanson01.asp.
Apache Axis2, Geronimo and JiBX allows fast development of WS, or so the creators profess.
The PHP environment- you could try NuSPHERE PHPed. According to one website, with it you can develop a web service in under an hour.
I hope this was useful to you.
[Based partly on Topley, K. (2003) [i]Java TM Web Services in a Nutshell: A desktop Quick Reference. 1st ed. California: O�Reilly & Associates, Inc]

Dynamic destinations for adaptive web service in webdynpro for java

Hi,
Please advice me on how to create dynamic destination for adaptive web service model in webdynpro for java.
Regards,
Patana

Hi,
If this is the case, then use the HTTP destination for this.
What you need to do is:
1. Create one HTTP destination in visual administrator at services-> Destinations. Provide HTTP url of the your web service and the security options.
2. Specify this HTTP destination in the code before executing web service model.
Write following code for that:
wdContext.current<node name>Element().modelobject()._setHTTPDestination(<Specify HTTP destination name>);
Then execute your web service model.
Now, whenever you want to change the server on which your web service is running, make change in the HTTP Destination in visual administrator.
Refer this link,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Sunaina Reddy T

Which is best web service framework for developing web services in Java?

Hi Friends,
I want to develop web services using Java 1.5.
But I am in confusion with different frameworks provides to develop WS.
Like
1) Apache axis
2) Java Web Service dev. Pack
3) JSON-RPC-Java
4) Web Ser. Invocation Pack
5) XFire
Can some one guide which framework should I use?
OR where will i get useful comparison between this frameworks?

Hi,
Personally I have used:
1. XFire
2. Apache Axis
3. Java Web Service Pack
My personal opinion / .02 cents?
1. XFire is awesome and very easy to set up and get running. They also have a great community / mailing lists. We use it in some production systems and it runs great.
2. Apache AXIS 1/2 made me want to dive out the window and go splat just short of the double yellow line on the road. Pain in the butt to set up and get running. Way too complex. Really bad docs / tutorials / support.
3. Java Web Service Pack - I really prefer NetBeans 5.5 and the JWSP. Easy to build services, cohesive enviroment. You can get the job done.
That's my two cents.
M Goodell

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

Looking for More Info on Java Web Service

Hi Everyone,
Where can i find More info on Java web Service in BPEL? Is there any link or documentation for this? I looked at the tutorial and the only info available is:
B.2.7 Java Web Service
This service enables you to publish a Web service from a Java class. A wizard creates the WSDL document and deployment files needed to publish your code as a Web service. After you select the class and methods you want to publish, the wizard generates deployment descriptors, a JAX-RPC mapping file, and a WSDL document that can be deployed to an application server.
Thank You,

Sure,
one way would be to upload the files to XE using the WebDav feature of the XML DB. You find more information here: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
Another option would be to configure a standalone Apache as a proxy server to XE. This way you can configure the Apache any way you like.
HTTPS with Oracle XE ?
Re: Existing http server
For correctly logging the remote IP you will need the following workaround:
Re: How to get X-Forwarded-For value?
Regards,
~Dietmar.

Dev Env Setup for Java Web Services

Similar Messages

Maybe you are looking for