[dev tools] ID starting with numeric value crashes the DOM inspector

Hello,
I posted a bug on bugzilla without any answer and like to ask if anybody is able to reproduce the problem: https://bugzilla.mozilla.org/show_bug.cgi?id=1002280.
This is quite annoying since I'm working on old code falling into the test case of my report.
Thank you in advance for answers.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Keep checking your bug report . Your problem will be solved soon .
Thank you.

Similar Messages

Problems with numeric values in the barcode

Hi
I have a problem with the data from a numeric field, when it is encoded in the barcode the validation pattern seems to be ignored.
I have set the validation pattern of the numeric field to be
num{9999}
And when I enter a value like "0200" it is displayed in the form as "0200", which is correct.
BUT in the barcode the value is captured as "200", which i NOT what I want. I need all four characters to be in the barcode. Even when the first one i 0 (zero).
How can I do that?
Kirstine

Can you send the form to [email protected] and I will have a look. Please include a description of the issue in the email as the email and this forum are not tied together.
paul

Import Purchase orders failing with numeric/value error issue

Import Purchase orders failing with numeric/value error issue

Hi All,
Import Purchase Orders program is failing with PL/SQL Numeric or Value Error.
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 55
Kindly help me to get the issue fixed

How to 'Only' allow Numeric value in the Edit Box in AcroDialogs

Hi all,
I've create an AcroDialog wizard, I need to allow onlu numeric values in the Edit Box. Can someone please help me with this validation?
Regards,
Chris

There isn't a keystroke event for custom JavaScript dialogs, or any proper interactive events for the fields. You can validate fields when the user presses OK, and you can test fields when the user changes focus by setting the "Action" property for the field. But the only practical way to restrict user input to numbers is to use George's suggestion. There is a number property for the fields but it has an undesirable side affect and I never use it.
Thom Parker
The source for PDF Scripting Info
pdfscripting.com
The Acrobat JavaScript Reference, Use it Early and Often
http://www.adobe.com/devnet/acrobat/javascript.html
Then most important JavaScript Development tool in Acrobat
The Console Window (Video tutorial)
The Console Window(article)

Qosmio F30 starts with blue stripes during the start screen of Vista

My Qosmio F30-114 runs since years without Problems with Vista Ultimate.
Since some Days there is a huge Problem.
The Qosmio starts with blue stripes during the start screen of vista.
So I deleted the driver of the graphic card and used the standard vga card driver. the hardware assistent found a driver on the system.
For a short moment i was very lucky.
After a restart, there was a blue screen. after the next restard, again the standard vga card driver.
What can i do?
The download section of toshiba has no drivers for graphic card.
And really ... i wonder - how does it works all the years without problems...
Has anyone a solution?
thanx
toshibalover ;-)

Hi!
First of all do you have this issue on an external monitor too or only on the internal monitor? Maybe its not a problem of the graphic card so check this with an external monitor.
I have checked the Toshiba website and there I can find some drivers for the Qosmio F30:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

Not able to change values in the Property Inspector

Hello!
Can some one please help me with this. I was working in
Director when I noticed that all of a sudden I wasn't able to
change the values in the property inspector, specifially the sprite
properties such as the x and y coordinates and the width and
height. I'll type in a value and then I will get an error sound and
it will revert to the previous value. How can I fix this??
Thanks!

Hi Ringerz,
I've seen the PI lock up sometimes. What usually works is to
switch to List Viw
Mode. Never have trouble there. Then, close Director and
reopen. Think it's jus a
bug that hasn't been fixed yet.
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au
email: [email protected]

I can compile objects with SQL dev tool but not with a direct sql

hi,
This is a bit weird - I'm probably not familiar enough with Oracle's compilation process...
I'm creating a some functions / procedures / triggers. When I run the script to create them with Oracle's SQL Developer tool, usually they become immediately valid, and if not then I can manually right click them and choose Compile, and they're compiled correctly and become valid.
However, when running them with command line tools, they're uncompiled after created. I'm trying compile them with
ALTER PROCEDURE / FUNCTION / TRIGGER MySchema.MyFunction COMPILE;
and it always returns
Error starting at line 1 in command:
alter function MySchema.MyFunction compile
Error report:
SQL Command: alter function
Failed: Warning: execution completed with warning
alter function MySchema.MyFunction succeeded.
and the object remains uncompiled / invalid.
also tried with DBMS_... utils and got the same results.
Same with adding things such as PLSQL_WARNINGS = 'ERROR:ALL' to the stmt
But when I go in SQL Developer to the object, right click and click Compile, it compiles fine w/o warnings / errors and becomes valid.
Is there anything else I should run other than this alter..compile? Is SQL Dev tool doing something different than "alter function ... compile" when right clicking and object and clicking "Compile"?
thanks!

hi,
I'm having difficulties connecting with SQL Plus, since it seem to require at startup some admin user/password, which I don't have at the moment. Also tried to give it in command line the db name and params and it still require this pass... Will try to get it...
But again, when I'm right clicking the object in SQL Developer and click Compile, it compiles fine and becomes valid. After doing that, running
alter function mySchema.MyTestFunction compile;
passes with
"alter function mySchema.testfunction succeeded"
If I run this sql before doing compile with SQL Developer, it fails with what I posted before.
I wonder if SQL Developer does things other than the above compile stmt.
If I right click on Functions in SQL Dev and click Compile All or Compile Invalid, I can see the sql it about to generate, and it's the same as I tried - and fails as well... Only when right clicking the object and Compile it works...
A test func I tried, for example:
create or replace
FUNCTION testFunction(n in number)
RETURN NUMBER
IS
BEGIN
RETURN n + 1;
END;

Problem in spring rich client with numeric value

I am facing a problem in spring rich client.
I have a text field of NumericJTextField type which extends JTextField and it is storing value of long type.
In one constructor of this NumericJTextField ,we are creating new instance of NumericDocument which extends PlainDocument.
We are alos using document filter.
My problem is that,when i enter a numeric value starting with 0 for ex: 0123 then at the time of saving,
it automatically converts this numeric value into something else like 83 or 9 etc.
I dont know how and where this is happenning?
can anyone help mme in this?
Thanks!

It's happening somewhere in the Spring code, where it translates a string into a number. Apparently it treats strings of digits which start with a zero as octal. (You know what that means now, right?)
I don't know much about Spring, but this isn't a Spring forum so I'm free to post my uneducated wild guesses here. Quite possibly this is a Spring FAQ which you would find on the Spring website.

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

Question regarding creation of xml-elements with numerical values

When i create xml-documents from xml stored in the database (xmltype table based on an xml-schema), i find that numerical values which were stored as 0.395 (with the "." as the decimal separator) are retrieved as .395.
Is it possible to apply a format mask so that the numerical value is retrieved as 0.395?
thanks, Bart
N.b. Note that i select a complete xml-fragment. So my problem seems related to the storage or retreival of 'schredded' XML. I do not use SQL/XML-functions with relational data, in which case i know how to apply a format mask.

I don't use XSLT, i just query the XML-documents stored in an XMLType column with a simple SQL-statement.
I have posted a simple example over here Re: Is it possible to influence the creation of empty elements?

How can I concatenate a currency field (eg: 12.25) with numeric values

Hi,
I ma working in ECC6.0.
How can I concatenate a currency field (eg: 12.25) with numeric and character values into a variable.
I want to concatenate 12.25 with "+" and "0".
Regard,
Divya

Hi,
I ma working in ECC6.0.
How can I concatenate a currency field (eg: 12.25) with numeric and character values into a variable.
I want to concatenate 12.25 with "+" and "0".
Regard,
Divya
==================================
data: l_string type string.
move l_curr_field to l_string.
condense l_string no-gaps. "if needed
concatenate l_string '+' '0' into l_string.
now your l_string will have all the values.

How to put 'NA' in text filed with numeric value

Dear fellows,
I need to do one think in my forms, and that is I want to put value 'NA' instead of null values in numeric field in my forms, when no number is inserted than NA will be written there.
Could it is possible or not, if so kindly help me in this regard I will be thankful.

Dear Gerd Volberg
Thanks dear for your reply, one think more, if I need to do like this that in one form data is entered and on second form I just need to display the numeric value but when a null value occur just NA is shown. Could it possible.
If so please help me.

Guid Downloading Character field with numeric value

Hi All,
I am downloading one table through gui_download, file type is asc. While downloading the internal table contains one field
w_lif(20) type c, which contains the value '1234545567' all numeric value, now in excel it is displaying as exadecimal , here i need to convert the type of the column in excel to see the actual value.
could you please tell me , how to get actuall value directly to excel
your valuable help is appreciated.
Regards,
Siddivinesh Jogu

Hi,
You can try the File Type as DBF. This retains the format of all the columns as Data.
Please let me know if this help,
Regards,
Janani

Assigning a numerical value to the answers of a multiple choice text field

I have searched and searched thru a million articles but there does not seem to be a simple way to do this, and I hope like heck that I am just overthinking it. I tend to fall back on years of coding and completely miss a simple answer when doing this
kind of thing so I hope someone can help.
I'm developing a scorecard. I have a list that has a form on it that asks a series of questions on it. Some are yes/no.
I want to assign the numerical value of "1" to "yes", and "0" to "No".
This is so that when I create the actual scorecard, I can add up all the answers and generate a calculated score.
Example:
Was this incident properly classified?
[Dropdown]
Yes
No
Do I need an extra column assigning the values? Can I assign the values within the column itself? Any assistance will be really helpful.

there are several options:
- calculated column with something along the lines of =IF([dropdowncolumn] = "YES", 1, 0)
- separate lookup list with values
- if you're using infopath, your column could be numeric, and just use a DropDown as the visualization, and populate the DDL with key/values of "Yes"/1 and "No"/0 (though in this case, when viewing the list as a native grid, the column
would only show 1/0, not "yes / no"
- depending on how you're creating the scorecard, use a yes/no (boolean) column and just convert during the calculation
lots of options come to mind.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

[dev tools] ID starting with numeric value crashes the DOM inspector

Similar Messages

Maybe you are looking for