Developer error when installing Labview 2010

Dear Administrator,
I uninstalled my old version of Labview 7.1 with Windows "Programs and Features", and try to install Labview 2010. However, error occurs. 
It says:
" Developer Error. The following errors were found in your ini file:
1. Specified file not found: [Utilities] UpgradeManagerPostProcessro = bin\nipie.exe
2. Specified file not found: [Utilities] NISysinfo = C:\Users\...\NI.LabVIEW.2010.v10.0\bin\NISysInf.dll
Correct the ini file and try again."
My system is WIN 7 English version.
Help please.

Hello,
The first step I reccomend you try is to re-download the LabVIEW installer, and try to run it again.  Also, make sure you have Administrator access on your computer.
You can download LabVIEW here.
Regards,
Matt M.
Applications Engineer
National Instruments

Similar Messages

  • Developer Error when Installing Labview 8.5

    Hi there,
    When I was installing Labview 8.5 directly from the CD, I had error message 1311. Following the recommendation posted on the discussion forum, I copied the CD to the C drive and installed Labview 8.5 successfully. However, when I tried to follow the same procedure when installing the device driver CDs,i.e. by first installing the CD to a folder in the C drive and installing it by launching setup.exe, I had the following error:
    "Developer error. The following errors were found in your ini file: 1 Specified file not found. [MSIEngine] WinNTPath = SupportFiles\WindowsInstaller-KB893803-v2-x86.exe       Correct the ini file and try again"
    When I checked the setup.ini file, under the [MSIEngine] entery, I found the following text:
    "[MsiEngine]
    WinNTPath=bin\WindowsInstaller-KB893803-v2-x86.exe
    RequiredVersion=3.0.0.0
    CommandLine=/passive /norestart"
    How can I correct the ini file? Should I change the WinNTPath to the one generated by the error message? Will this solve the problem? Your help would be very much appreciated.
    Regards.

    Hi Muks
    I have attached the niPie.exe from the Vision Development Module 8.5 installation CD. If you can still not install the software try downloading it from the link below. Let me know if this helps.
    Vision Development Module:
    http://joule.ni.com/nidu/cds/view/p/id/839/lang/en
    Thank You
    Eric Reid
    Applications Engineer
    Thank You
    Eric Reid
    National Instruments
    Motion R&D
    Attachments:
    niPie.zip ‏23 KB

  • Fatal Error when installing LabView 8.5

    I encounter a fatal error when I attempt to install LabView 8.5. The error that occurs has the following in its details:
    ".\UberInstaller.cpp(1871): IInstallerError 10014
    Fatal Error. A failure has occurred in NISystemInfo.
    CoLoadLibrary failed on C:\lv8.5\bin\NISysInf.dll"
    I am installing from a system that previously had LabView 8.2 installed, however everything was uninstalled before I began installing the new version.
    No hardware is connected in my computer.
    I copied the files from the DVD to my harddrive and am still failing to install it from there.
    The disc should be fine as my supervisor had used the same disc to install on his computer. ( our licence allows this )
    Any help would be appreciated.
    Attatched is a screenshot of the error.
    Attachments:
    error5.JPG ‏165 KB

    IInstallerError 10014 
    I searched for and found the same error in this forum that I am experiencing. I am trying to install the NI Switch Executive and the install fails every time. This is a fresh install and I am not running any antivirus s/w. It is a DVD copy of the Switch Executive s/w. Has there been any conclusive explanation as to what is happening with this? I have included a .jpg of the error. Thanks in advance for any help.
    Attachments:
    Error_Message.jpg ‏96 KB

  • Memory Error when installing labview 6.1

    I had labview 6.0, 6.1 and RT installed on my PC (windows 2000). I tried to install application builder but I got Error that I have no labview installed, so I tired to uninstall RT, but I was abe to. Then I found out that I can't install or uninstall any of the Labview versions. So I went and deleted the whole NI directory, all the keys related to NI in the registry file, and Labview.ini. Now I'm trying to install labview 6.1, but I'm getting memory error and setup terminates. What can I do!
    Attachments:
    LB_Setup_Error.gif ‏36 KB

    First, I recommend contacting NI support at ni.com/ask and starting an incident report.
    Second, I recommend either restoring your registry from backup, or wiping your system and starting over. I know it doesn't sound like fun, and it isn't, but it is probably the only way now you can guarantee a good clean registry. Alternatively, go through the registry again and make sure all National Instruments and LabVIEW entries are deleted.
    In the future, and I make this recommendation to everyone, you should, as a safe practice, make a backup of your registry before you install anything, and also periodically. Archive these and label them with the list of programs installed, or with any new programs that have been installed.
    The Windows registry is obsolete,
    and complete hopeless when it comes to a stable system. There is no automated backup of the registry to my knowledge. The registry is the biggest source of problems with Windows, followed of course by DLLs (everyone has their own version, and noone's is alike, much less works right.) The registry can be backed up by using "Export" from the regedit program. Backups can be restored with the "Import" function in regedit of course.
    Good luck.

  • Error when Installing Exchange 2010

    I get the following error when attempting to run setup /PrepareAD /OrganizationName:vdh -- Clean Install of Exchange
    Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Add error on entry starting on line 47: Object Class Violation
    The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
    The extended server error is:
    0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 590479
    An error has occurred in the program
    Connecting to "labkord-wdad01.lab.bhavingpatel.com"
    Logging in as current user using SSPI
    Importing directory from file "c:\tmp\C5C.tmp"
    Loading entries
    1: CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry DN: CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry modified successfully.
    2: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry DN: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry modified successfully.
    3: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry DN: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry modified successfully.
    4: CN=409,CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry DN: CN=409,CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry modified successfully.
    5: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Add error on entry starting on line 47: Object Class Violation
    The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
    The extended server error is:
    0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 590479
    4 entries modified successfully.
    An error has occurred in the program
    If someone knows how to resolve this please let me know. I'm having issues getting it to work.
    BTW I ran setup /PrepareSchema already....I can't get this crap to work, is it just me? it's starting to drive me off the wall....
    .......ok after manually adding the cn=x400 i now get this error:
    Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
    Add error on entry starting on line 182: Object Class Violation
    The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
    The extended server error is:
    0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 131517
    An error has occurred in the program
    setup logs:
    [6/19/2014 10:42:40 PM] [2] Entering ScHavePermissionToCreateDSObject
    [6/19/2014 10:42:40 PM] [2] Leaving ScHavePermissionToCreateDSObject
    [6/19/2014 10:42:40 PM] [2] User has enough permissions to update templates.
    [6/19/2014 10:42:40 PM] [2] Entering CAtomOrgCtChildren::ScInstallTemplates
    [6/19/2014 10:42:40 PM] [2] Entering ScCreateTempFileName
    [6/19/2014 10:42:40 PM] [2] Leaving ScCreateTempFileName
    [6/19/2014 10:42:40 PM] [2] Entering ScSubstituteStringInFile
    [6/19/2014 10:42:40 PM] [2] Leaving ScSubstituteStringInFile
    [6/19/2014 10:42:40 PM] [2]  ScRunLDIFScript (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\exmisc.cxx:888)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2]  CAtomOrgCtChildren::ScInstallTemplates (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:816)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScInstallTemplates
    [6/19/2014 10:42:40 PM] [2]  CAtomOrgCtChildren::ScUpdateTemplates requires that a user have at least Exchange Administrator permissions on the organization object.  Templates will be updated in the organization when update is run by a user with the
    correct level of permissions.  If update has ever been run by a user with Exchange Administrator permissions at the Organization Level, then templates have already been updated, and this message can be safely ignored. (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1508)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2]  CAtomOrgCtChildren::ScUpdateTemplates (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1559)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScUpdateTemplates
    [6/19/2014 10:42:40 PM] [2]  CAtomOrgCtChildren::ScAddDSObjects (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:216)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScAddDSObjects
    [6/19/2014 10:42:40 PM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2]  ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
               Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
    [6/19/2014 10:42:40 PM] [2] Leaving ScSetupAtom
    [6/19/2014 10:42:40 PM] [2] [ERROR] An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
    [6/19/2014 10:42:40 PM] [1] The following 1 error(s) occurred during task execution:
    [6/19/2014 10:42:40 PM] [1] 0.  ErrorRecord: An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
    [6/19/2014 10:42:40 PM] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log
    LDIF.ERR in your TEMP directory..
    [6/19/2014 10:42:40 PM] [1] [ERROR] An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
    [6/19/2014 10:42:40 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
    [6/19/2014 10:42:40 PM] [1] Finished executing component tasks.
    [6/19/2014 10:42:40 PM] [1] Ending processing.
    [6/19/2014 10:42:40 PM] [0] The Exchange Server Setup operation did not complete. For more information, visit http://support.microsoft.com and enter the Error ID.
    [6/19/2014 10:42:40 PM] [0] End of Setup
    [6/19/2014 10:42:40 PM] [0] **********************************************

    You try to install E2010 with SP3 or SP1?
    E2010 SP1
    Can you please paste the setup logs here?
    The error of the log is above.
    You have Enterprise Admins credentials when you try to execute Setup.com
    /PrepareAD?
    Yes. I have all the Admin rights
    You
    try to install exchange via GUI or unattended setup ?
    Both same error.

  • Run time error while installing Labview 8.6.1 in Vista x64

    hai friends,
               i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

    Thank You Mr.Jason Daming,
    Same error what post Mr.muks referred in the last reply....
    When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

  • Error when installing app

    I keep getting an error when installing some apps - unknown error (0xE8000013)
    Anyone know what this is or why this is happening???
    any help apreciated

    leefilmer,
    Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
    Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
    Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
    Hope this helps,
    Raleigh

  • Mount error when installing xcode 3 and iOS 4

    Hi,
    I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
    I work on Mac mini with Mac OS X 10.6.
    Could anyone help? Thanks!
    Regards,
    Emily

    Hi Ken,
    Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
    It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
    Regards,
    Emily

  • How can I unintsall labview 2010 ? I install labview 2010 first.

    I install labview 2010 at first.
    I install labview 2010sp1 after  a period time.
    I would like to remove labview 2010 and then keep 2010sp1.
    How can I do ?
    I can't found that national instrument item of add/remove software in the control panel.
    Have extra remove  tool help to remove them ?
    I would like to keep one to save disk space.
    Thanks
    Longmild

    Hi longmild,
                    Go through these links:-
    http://forums.ni.com/t5/LabVIEW/how-to-uninstall-LabView-when-it-s-not-in-Add-Remove-list/td-p/61863...
    http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/uninstalling_silent_installers
    http://forums.ni.com/t5/LabVIEW/remove-labview-2009-without-using-add-remove-program/td-p/1398624
    Thanks as kudos only

  • Error while installing LabVIEW on Linux

    Getting Error while installing LabVIEW on Linux and unable to use VISA.
    Please check the installation Log i Have attached.
    nilesh
    Attachments:
    Installation Log LV2012 Linux.txt ‏25 KB

    I could not find a trail version for LINUX. 
    Its only available for Windows and mac.
    Will it possible for you to give just the C++ library and include files??

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

Maybe you are looking for