Developer forums login still broken

It might be that it's just been merged with apple communities? or this is just a developers thread about the forums rather than the developers forum itself?
Anyway, I just tried to login to the developers forum, and it brings me always to this page: https://developer.apple.com/devforums/
It doesn't say error, nor success, nothing. Just sits there. That's the link at the bottom of every apple page like this https://developer.apple.com/
I'll post my question about safari viewport here, but I tried to login to the forums (before communities?) months ago and I'm surprised the few times a year I tried to access to apple support I ALWAYS have one or another problem. If you check my previous posts you can tell most of them are access problems.

I unmarked the topic as question, because of the title is rather a "report".
Michael Superczynski wrote:
There's nothing wrong with either of those links you posted.
Well, that's a very strong assumption.
That says
a) I'm the problem
b) Your concept of "working" is too limited
c) Its "intended behavior" is not intuitive (it does perfectly what nobody expects)
d) suck it up. It works for me hehe. (i.e. "I don't care about others because it works for me")
Or any other reason that calls at least for a "question" rather than such a strong assumption.
Besides, I never said the second page had any error. I just said the link is featured there, where all the other links are, and I wasn't accessing an old url (in case the developers forum was moved here)
The first link keeps appearing after I log-in. No redirection to the forum. I couldn't tell wether I've got successfully logged in or not, because this page keeps showing a "sign-in" button.
After logging in twice and getting the same "log-in" page, do you think "there's nothing wrong with that page"?

Similar Messages

Missing history in ABAP Development forum

When I look at the main page of the ABAP Development forum, I only see two pages of history. When I look at a sub-forum, I see lots of pages. Is it just me? (I have set my display to 50 items per page.)
Just noticed - same behavior here in Community Discussions.
Rob
Edited by: Rob Burbank on Apr 27, 2009 10:37 AM

For me it is still only 4 pages (I'm on 25 per page) in "Community Discussions". However in the sub forums e.g. "Suggestions and Comments" I can browse to older pages, as opposed to my previous statement.
It's not really a problem from my point of view, as the response time seems to be slightly better.
Thomas

Forum Login/Logout

I'm not a fan of your new forum login/logout policy. While the login form has a "remember me" option, it does not appear to do anything. I still must login one or more times per day to participate in discussions.

Make sure your Internet options looks something like this:
If it isn't then change it and then try again. If it is then post back for somebody else to suggest something else.
You may wish to clear the cache (& coockies) once to make sure there is nothing that is bugging your IE.
Good luck.

Forum login problems

I changed my forum login password, then could not log back in. I had to use forgot password to set a new password in order to log in. The next time I attempted to login, my new password would not work, and I was locked out of the system for some time for too many attempts to login.
When I finally was able to attempt login again, my new password still would not work. So, I used forgot password again to set a new password, was immediately logged in, but after logging out, I could not log back in. This has repeated over and over. When you respond to this inquiry, I will most likely have to set a new password to log in and check your response.
I was able to contact an HP representative by phone who referred me to an email address for forum issues. That email address is [email protected] - I hope it generates results.

Hi John,
Thanks for bringing this to our attention. We'll have someone look at this issue and get back to you as soon as possible.
Thanks,
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

I have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no jo

i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy

Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark.

View Options Still Broken

View options was broken in Lion (some carried over, others became a white background with greyed out options). I was hoping against hope that this would get fixed in mountain Lion, but my User folder's View Options, for example, is still broken. What will it take to fix this? Can anyone help?

Can you explain what it is you think is broken?
Ok, I think I might have figured out what you are describing.
Sorry to inform you, but you can't set any backgrounds if you have an arrangement set. Arrangement must be set to None in order to set a background color or picture. And, it can only be done in Icon view.
There is nothing "broken." Just too difficult to implement, I imagine.
Message was edited by: Barney-15E

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

HT1414 Ipod Touch can't find Bluetooth device. (Jam Box) Upgraded Itunes software did a backup and restore on the Ipod. My PC sees it fine. IPod used to work with JamBox. Reset Jambox, no luck. Followed every instruction from the forums. Still no luck

Ipod Touch can't find Bluetooth device. (Jam Box)
Upgraded Itunes software did a backup and restore on the Ipod.
My PC sees Jam Box fine. IPod used to work with JamBox. Reset Jambox, no luck.
Followed every instruction from the forums. Still no luck.
Reset Jam Box to factory settings.

Did a network reset on the Ipod after the backup and restore. No luck

My playback screen in iMovie '11 is always blank or a still, broken picture. How do I fix this?

Picture of my screen: http://imageshack.us/photo/my-images/88/screenshot20120623at929.png/
Sometimes it ends up like this: a still, broken picture: http://imageshack.us/photo/my-images/688/screenshot20120623at929.png/
I don't know what happened. It was fine until I tried to play back a video I was making and it didn't want to. Imported videos play fine, but when I drag a clip to the editing part it doesn't play.
I also made a short project a while ago, but no matter what I tried I couldn't delete it. I also couldn't play it again or even access the editing screen
I don't know if I imported too many videos, or have too many videos in the Project Library, but the playback screen is just not working!
The audio is completely fine, however.
What happened?

Hi
Have no clue - but You might try some of this
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

How to Develop a Login Form In Developer 6i

Hi to everyone,
I have developed some forms in Developer 6i. Now i want to deploy these Forms to client side. I want to design a Login Form for the end users to Use the Database Application. But the problem is, I don't know how to Develop a Login Form with the permission for the End Users to access the application.
Also please tell me how to configure the FORMS Developer 6i to Run the Forms by the end users.
Please help me to solve out the problem.
Thank you in advance.

If you are using ADFBC, the easiest way is
- drop the data control as ADF form
- add CreateInsert method binding to the pagedef
- add an invokeAction for the createInsert with a refresh property set to renderModel so that an empty creation form will be shown on page load
for insertion
- Finally, add the commit action as button
Sireesha

It seems the safari 5 update broke firefox access to apple developer forums

I can't seem to access the "Apple Developer Forums" link on the page: http://developer.apple.com/iphone/index.action
I had been accessing this fine through firefox, but after I did the safari 5 update last night, it seems I can only use safari 5 to get access. Does anyone know what the story is?
I get a 404 I think because it can't find an error doc to handle the get issue:
+Request Entity Too Large+
+The requested resource+
/iphone/discussionForum.action
+does not allow request data with GET requests, or the amount of data provided in the request exceeds the capacity limit.+
+Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.+
+Apache/2.2.9 (Unix) PHP/5.2.6 mod_jk/1.2.25 mod_perl/2.0.2 Perl/v5.8.8 Server at developer.apple.com Port 80+

It has been fixed.

My Visit to Oracle Developer Forum 2006, India Photos !!

Last week 11th May, I attended the Oracle Developer Forum held in Chennai. The presentations gave us insights into Oracle Database 10g Express, Oracle JDeveloper, Oracle SQL Developer, SOA, Rapid J2EE Application Development with Oracle Application Express Edition and we had a lots of live demos. Chk out the photos and my experience at :
http://i5bala.blogspot.com/2006/05/my-visit-to-oracle-developer-forum.html
do drop in your comments
Balakumar Muthu
http://i5bala.blogspot.com

Mel,
Oracle Forms 10g is 9.0.4 internally. It is shipped with Oracle Application Server 10g and Oracle Developer Suite 10g (9.0.4). To develop and test Forms applications you need the Forms Developer Suite. For runtime during production you need Oracle Application Server.
Oracle Application Server 10.1.2.0.0 is a Java, BI and and Portal edition. Forms and Reports will be in 10.1.2.0.2, aka 10g R2, which is not out yet. Components in this stack are the "real" version 10.
You will be able to use Oracle9i database with Forms 10.1.2. To avoid conflicts, make sure the developer software gets installed in its own Oracle Home so, not to interfere with database files.
Frank

Request for iPhone developer forum

There has been a recent influx of new iPhone developers in the developer forums. They often don't identify their problem as being specific to the iPhone. You have to look at what they are talking about and see that it is all iPhone stuff. Apparently the iPhone SDK is significantly different enough that answers to basic questions for MacOS X development are not correct for the iPhone SDK.
If there were an iPhone SDK forum they might be more inclined to put iPhone-specific questions in there.

I completely agree with the previous sentiments for an iPhone developer forum. Why?
I am part of the problem. I have come into the Apple development process "solely" to work on the iPhone. I know nothing about Mac OS X. Because of that I was astounded that the iPhone documentation was not "iPhone" but rather Xcode documentation. Yes I understand that there is a great deal of overlap BUT from my point of view it looks as though Apple was extremely lazy in just dumping all of their code and documentation on the iPhone developer. They need about 5 editors to weed out what is and is not iPhone. Just my two cents.
-Doug Danforth

Code Formatting Instructions for Developer Forums

Although this topic only applies to the two Developer forums, the need for some upfront code formatting instructions in those forums is desperate. There may be hundreds of threads which include one or more messages on this subject. In my case alone, I've posted at least a dozen messages each containing these three lines:
Paste your code here.
Of course a quick search of either Dev forum on the keys +code formatting+ will find the above right away, but those who need help the most don't know code requires special formatting so won't be making that search. For the same reason, neither the excellent instructions in the User Tips Library nor the pertinent threads in this forum are likely to be discovered before they're needed. The +Help & Terms of Use+ FAQ might seem to be a good place for the instructions, but this has been proposed so many times before I'm sure it will never happen. The need is confined to the Dev forums afterall.
I think the solution would be a permanent post (similar to +How to Post a new Topic+ in this forum) at the top of both Dev forums. I don't think most developers want to see instructions on any other topic at the top of the forums, but a brief note titled +How to Post Code+ might make everyone's life easier.
Assuming most of the other developers agree, how could we make this happen?

Thanks so much for helping with this, Nubz!
Joerg's instructions are excellent. I refer to them often and I've had them bookmarked since I found Apple Discussions last year. The new Code section is great!! Very clear!
Now we just need to find a way to get users to that page. Our problem has never been with users who are interested enough in Apple Discussions to visit the Tips Library. The unformatted code is coming from first-time users--not necessarily novice coders, but programmers of all skill levels who aren't coming here to learn about the forums or relate to the community. These folks are focused on their current project, may have found no answers anywhere else, and arrive here with tunnel vision. Often there's a language problem as well.
The newly arrived OP will often start the thread with a page of unformatted code. Those of us with eyes used to filling in the missing brackets, indentation etc. can sometimes decypher the mess, but usually we need to give formatting instructions and ask the OP to repost. The frequency of this scenario has been increasing. Lately I've been posting those instructions almost once every day.
Of course that's a good sign! We've been giving good service down there and the number of newcomers seems to be reflecting that. A big percentage have turned into regulars, so I think we have a very healthy forum. It's just the formatting cycle gets old, and the time and bytes add up too.
My suggestion is this:
One yellow moderator announcement that stays in the first position on the topic page for both dev forums. The subject line is:
To format code: Paste your code here
The user doesn't even need to open the message. Only developers will see this. No change to the page header is needed. If the user does open the message, a link will be provided to Joerg's tips.
- Ray

Apple Configurator still broken in 1.4.2 for me

My testing of 1.4.2 today shows it's still broken. I need to transfer existing supervised iPads from old 2008 MacBooks to new 2013 MacBook Airs with Mavericks. I have special ed students each assigned iPads that have unique configurations for each user. I can't just wipe the device and start over. They have many apps setup to communicate with teachers and parents that took time to configure. In the past when I needed to transfer an iPad to another laptop I was able to make a backup in iTunes un-supervise the device off the old laptop then re-supervise it on the new one. Once I copied the backup to the new laptop I was then able to open iTunes restore the backup for the students data. I then opened Apple Configurator which showed the device still supervised at which point I refreshed the device. This put the correct profiles back in place and I was off and running to enroll it back to our MDM. The product now just wipes the device and prepares it again. Since it's first release at the very beginning I've been held hostage to many times by this product. If Apple truly believes this product is the answer for enterprise and education device preparation they really need make sure the product actually works before releasing it to the masses. The hours I've wasted trying to get this working I'll never get back.
If anyone has any suggestions in how I can transfer existing devices to another laptop then restore, retain, & refresh the device without being brought back to square one I really appreciate it.

I am having issues with it not restoring the app locations on the screens or if they were in a folder.

Developer forums login still broken

Similar Messages

Maybe you are looking for