Developing reports in bw for basis

hi all
can we develop reports in basis in bw?
shalini

Yes shalini it is possible.
You have to take look at technical contents of BW. The info area name is
- Technical Content  ( technical name - 0BWTCT)
Please have a look at 0RSTT_C01 cube also look at the queries ,delivered with this cube.
If this cube is not installed then form BI install the same.
Please assign points if the answer is useful.
Regards,
Mahendra Sane

Similar Messages

  • Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

    Hi, We have a Scenario as below:
    Question1:
    We have a multiprovider contains 4 infocubes and 2 Master Data objects
    a.Demand
    b.Inventory
    c.Sales Orders
    d.In Transit
    Master Data objects
    a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
    b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
    At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
    We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
    Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
    In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
    We have another report which is the Inventory Report with the following details:
    Material, Location, MRP Controllder, Calday, Base UOM,      Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
    Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
    Question2:
    When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
    Regards
    Vijay

    Hi,
    I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
    Regards
    Prasad

  • When to use webdynpro for developing reports instead of ABAP Editor in R/3

    Hello Frends,
    I am new to Webdynpro ABAP. I just wanted to know when we should used webdnpro ABAP for developing reports, instead of using ABAP Editor in R/3. If you can give me the details it will be helpful.
    Thanks,
    Regards.

    Hi navnetha,
      As mishbah told you , that there is no hard and fast rule for reporting throught  webdynpro.It all depends on client requirement .Now if you want to develope alll the reports by using webdynpro without your clients request , then you need to explain the advantages of webdynpro reporting above abap reporting.
    for e.g.  Webdynpro reports can run on browser, They can be posted on portal, Easy handling and maintenance and reusability.
    Other than this i guess if you can show some business profit to the client, then i think every client would like to go for webdynpro reporting.
    regards
    PG

  • Developing Report for Oracle Apps 11i

    Hi,
    I am developing Reports for Oracle 11.5.8 and using Reports 6i
    Are there any good documents that can guide me to develop reports exclusively for Oracle Applications
    I am customizing one of the report, did a very minor modification and when I run it, it shows small square boxes in the output.
    If I print it, I dont see the small boxes, Can you let me know how to avaoid this.
    Aslo have a couple of questions, should I use the option "use character units in designer" or something else while developing the reports
    What shold be the unit of measurement (Inches, Centimeter or Points)
    Lastly, is it a good idea to "View the Grid" or not in the "layout editor"
    Thanks
    Vasanth

    Hi Vasanth,
    when I run it, it shows small square boxes in the outputI can think of 2 posssibilities:
    one, the width of the column in the layout is slightly smaller than required. You can try increasing the width of the layout objects where you see square boxes.
    two, you are designing the report in a language for which support/font is not available on your development machine.
    should I use the option "use character units in designer"This option should be used when you design a report in "character mode", not when you are designing the report in "bitmap mode". Pl see Builder Help for more information on MODE.
    What shold be the unit of measurementIs it up to you to decide. If you know the dimensions of the paper (on which you are going to print) in inches for example, you can design the report in inches. Choose any unit of measurement, and then define the width and height of paper in the Header/Main/Trailer Sections in that particular unit. The report output will be the same whether you choose the paper width as 10 inches or 25.4 cm.
    Also, about point...
    Point: Is a printer's type size that makes up a pica. Each pica contains twelve points and is equivalent to one-sixth of an inch.
    is it a good idea to "View the Grid" or not in the "layout editor"The grid is available to help you position objects in the viewing region of the paper layout. It is helpful so you can start designing with it, but you can decide to turn it off if you do not need it.
    The grid is drawn in relationship to the rulers. In the Ruler Settings dialog box, you specify the interval at which grid lines appear per unit on the ruler. �For example, if you have a Unit of inches and a Grid Spacing of 0.5, there will be one grid line per half-inch on the ruler.
    You get to the Ruller Settings dialog Box by choosing Tools > Options > Rulers.
    Navneet.

  • How to download Taxonomies For XBRL to develop reports in Hyperion FR?

    Hi All !
    Can anyone pls help me in developing Reports in Hyperion Financial Reporting Using XBRL?

    I believe that you 'll need to use the UK IFRS Taxonomy if you need to create reports according to UK GAAP.
    Consider that the IFRS Taxonomy is a global taxonomy. The UK made its own extension from the IFRS Taxonomy.
    Please check at: [http://www.ifrs.org/XBRL/Resources/XBRL+Illustrative+examples.htm] for some IFRS reports example.
    As far as i know the only institution requiring to fill in XBRL is the HRMC, so you better check the HRMC Taxonomy and consider too that HRMC will request XBRL reports using Inline XBRL.
    Please let me know if you need additional info.
    Cheers.
    Sergio Quiroz
    XBRL Quality Review Team - IFRS Foundation
    Oracle Corporation
    Santiago, Chile

  • Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

    Hi Guys
    i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx. 
    i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
    is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
    Regards
    Mukesh Vashisth

    Just wanted to quickly confirm
    before i dive into xamarian.
    Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

  • Profiles for Basis Admins

    Does anyone have a list of transactions that would be considered adequate for a basis administrator on a production system, which would allow them to do all the work they may need to without logging in with a sap_all id? 
    What is the best practice for access for basis in production?
    Lee

    Hi Lee-
    I can understand where are you coming from :). You needed the list of all possible basis tcodes in production environment rather adopting strenuous task of deriving and identifying all required functionality from SAP Standard role template for basis. Not an issue
    You can refer the tcodes listed below in production environment. It includes all required for regular support, monitoring & performance analysis.
    SSO2      Workplace Single Sign-On Admin.
    STRUSTSSO2      Trust Manager for Logon Ticket
    BD82      Generate Partner Profiles
    SMT2      Trusting systems (Display <->Maint.)
    SPAU      Display Modified DE Objects
    SDCCN      Service Data Control Center
    SLG1      Application Log: Display Logs
    SGEN      SAP Load Generator
    STMS_MONI      TMS Import Monitor
    STMS      Transport Management System
    SCOOL      COOL Repository
    PFUD      User Master Data Reconciliation
    SMMS      Message Server Monitor
    SICK      Installation Check
    SMICM      ICM Monitor
    SE38      ABAP Editor
    AL04      Monitor call distribution
    AL08      Users Logged On
    AL11      Display SAP Directories
    AL12      Display table buffer (Exp. session)
    AL13      Display Shared Memory (Expert mode)
    AL15      Customize SAPOSCOL destination
    AL16      Local Alert Monitor for Operat.Syst.
    BD21      Select change pointer
    BD50      Activate Change Ptrs for Mess. Type
    BD51      Maintain function modules (inbound)
    BD52      Activ.change pointer per chng.doc.it
    BD54      Maintaining Logical Systems
    BD64      Maintenance of Distribution Model
    BD97      Assign RFC dest. to Logical Systems
    CK11      Create Product Cost Estimate
    DB01      Analyze exclusive lockwaits
    DB02      Tables and Indexes Monitor
    DB03      Parameter changes in database
    DB12      DBA Backup Logs
    DB6BACKHIST      DB6: DBA Planning Calendar
    DB6CLP      DB6: Command Line Processor
    DB6COCKPIT      DB6: DBA Cockpit
    DB6EXL      DB6: Analyze Exclusive Lock Waits
    DB6PERF      DB6: DB2 UDB Cockpit Performance
    DB6SPACE      DB6: Space Analysis
    FTXP      Maintain Tax Code
    KOSRLIST_PR      Projects/Nets: Coll. Displ.SettRules
    LBWE      LO Data Ext.: Customizing Cockpit
    LSMW      Legacy System Migration Workbench
    OS01      LAN check with ping
    OS03      O/S Parameter changes
    OS04      Local System Configuration
    OS05      Remote System Cconfiguration
    OS06      Local Operating System Activity
    OS07      Remote Operating System Activity
    OSS1      Logon to SAPNet
    OY05      Factory calendar
    RBDMIDOC      Variant for RBDMIDOC
    RSA7      BW Delta Queue Monitor
    RZ01      Job Scheduling Monitor
    RZ03      Presentation, Control SAP Instances
    RZ04      Maintain SAP Instances
    RZ10      Maintain Profile Parameters
    RZ11      Profile Parameter Maintenance
    RZ12      Maintain RFC Server Group Assignment
    RZ20      CCMS Monitoring
    SA38      ABAP Reporting
    SAINT      Add-On Installation Tool
    SALE      Display ALE Customizing
    SASAPIMG      Call Up Project IMG
    SBIW      BIW in IMG for OLTP
    SCON      SAPconnect - Administration
    SCOOLTOOL      COOL Tools
    SCOT      SAPconnect - Administration
    SCU0      Customizing Cross-System Viewer
    SCU3      Table History
    SE03      Transport Organizer Tools
    SE06      Set Up Transport Organizer
    SE12      ABAP/4 Dictionary Display
    SE13      Maintain Technical Settings (Tables)
    SE15      ABAP/4 Repository Information System
    SE18      Business Add-Ins: Definitions
    SE37      ABAP Function Modules
    S_TABU_DIS Display Tables (customize it to ztcode)
    SCC4 (customize it to ztcode)
    SE63      Translation: Initial Screen
    SE11      ABAP Dictionary
    SE11_OLD      ABAP/4 Dictionary Maintenance
    SE80      Object Navigator
    SE81      Application Hierarchy
    SE82      Application Hierarchy
    SE84      R/3 Repository Information System
    SE93      Maintain Transaction Codes
    SESSION_MANAGER      Session Manager Menu Tree Display
    SICF      HTTP Service Hierarchy Maintenance
    SM01      Lock Transactions
    SM02      System Messages
    SM04      User List
    SM12      Display and Delete Locks
    SM13      Administrate Update Records
    SM14      Update Program Administration
    SM20      Security Audit Log Assessment
    SM21      Online System Log Analysis
    SM28      Installation Check
    SM35      Batch Input Monitoring
    SM36      Schedule Background Job
    SM37      Overview of job selection
    SM37C      Flexible version of job selection
    SM38      Queue Maintenance Transaction
    SM49      Execute external OS commands
    SM50      Work Process Overview
    SM51      List of SAP Systems
    SM56      Number Range Buffer
    SM58      Asynchronous RFC Error Log
    SM59      RFC Destinations (Display/Maintain)
    SM61      Backgroup control objects monitor
    SM62     
    SM63      Display/Maintain Operating Mode Sets
    SM64      Trigger an Event
    SM65      Background Processing Analysis Tool
    SM66      Systemwide Work Process Overview
    SM69      Maintain External OS Commands
    SMEN      Session Manager Menu Tree Display
    SMGW      Gateway Monitor
    SMLG      Maint.Assign. Logon Grp to Instance
    SMLT      Language Management
    SMQ1      qRFC Monitor (Outbound Queue)
    SMQ2      qRFC Monitor (Inbound Queue)
    SMQR      Registration of Inbound Queues
    SMQS      Registration of Destinations
    SMT1      Trusted Systems (Display <-> Maint.)
    SMX      Display Own Jobs
    SNL1      Display NLS (character set, lang.)
    SNOTE      Note Assistant
    SNRO      Number Range Objects
    SNUM      Number Range Driver
    SO00      SAPoffice: Short Message
    SO01      SAPoffice: Inbox
    SO02      SAPoffice: Outbox
    SO03      SAPoffice: Private Folders
    SO04      SAPoffice: Shared Folders
    SO05      SAPoffice: Private Trash
    SO07      SAPoffice: Resubmission
    SO23      SAPoffice: Distribution Lists
    SO50      Rules for inbound distribution
    SO99      Put Information System
    SOST      Overview transmission requests
    SP01      Output Controller
    SP12      TemSe Administration
    SPAD      Spool Administration
    SPAM      Support Package Manager
    ST01      System Trace
    ST02      Setups/Tune Buffers
    ST03      Performance,SAP Statistics, Workload
    ST03N      R/3 Workload and Perf. Statistics
    ST04      DB Performance Monitor
    ST05      Performance trace
    ST06      Operating System Monitor
    ST07      Application monitor
    ST10      Table Call Statistics
    ST11      Display Developer Traces
    ST14      Application Analysis
    ST22      ABAP dump analysis
    STAD      Statistics display for all systems
    STAT      Local Transaction Statistics
    SU01D      User Display
    SU03      Maintain Authorizations
    SU51      Maintain Own User Address
    SU52      Maintain Own User Parameters
    SU53      Evaluate Authorization Check
    SU55      Call the Session Manager menus
    SU56      Analyze User Buffer
    SUIM      User Information System
    S_BCE_68001285      Transaction S_BCE_68001285
    S_BCE_68001402      With Unsuccessful Logons
    S_BCE_68001418      Act. Grps According to Complex Crit.
    S_BCE_68001420      Act. Grps According to Complex Crit.
    S_BCE_68001429      Transactions for User
    TU02      Parameter changes
    USMM      Customer measurement
    WE02      Display IDoc
    WE05      IDoc Lists
    WE07      IDoc statistics
    WE08      Status File Interface
    WE09      Search for IDoc in Database
    WE20      Partner Profiles
    WE21      Port definition
    WE30      Development IDoc Type
    WE46      IDoc administration
    WE60      Documentation for IDoc types
    WE61      Documentation for IDoc record types
    WE63      Documentation
    Cheers!
    Ashok

  • Need help to develop report with column chart

    Hi
    I am new to SAP BO world.Could  anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
    Type: Column Chart
    u2022     Rows: Banking Asset Margin (%)
    u2022     Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
    u2022     Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
    u2022     Sub-total columns: PY YTD Underlying; CY YTD Underlying.
    u2022     Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
    u2022     Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
    Additional information
    u2022     Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
    u2022     Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
    u2022     All values in Black, but adverse to be shown below the bar.

    Hi,
    This type of question is almost impossible to answer over a forum .
    You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
    - Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
    - Others could be resolved in the semantic layer (Universe)
    - Other will be calculated in the presentation layer as local formulae or variables.
    whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
    Regards,
    H

  • National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

    The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
    To see examples of this toolkit or get more information please visit :
    http://www.ni.com/labview/report_gen_toolkit.htm

    It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

  • RE: (forte-users) Reporting tools/components for ForteApplications?

    Hi Robert,
    A good place to start when it comes to reporting is Forte Consulting. They
    have developed a tool called ReportKit, which is ActiveX integration with
    Seagate Software's Crystal Reports tool. Crystal is not really a three-tier
    tool (although, your Forte Consultant can probably set it up to mimic a
    three-tier tool), but it is a quick, easy way to get quality reports from
    your existing Forte applications. If you're interested, give your Forte
    Sales Rep (or, better still, your Forte Regional Consulting Director) a
    call. They can discuss pricing and scheduling. I've done several
    integration projects with Crystal, and I highly recommend ReportKit for
    small- to medium-sized reporting requirements. As for costs, I don't recall
    how much CrystalReports runs, but I think there are developer licenses and
    runtime licenses.
    FYI, the actual integration of ReportKit is pretty quick. The more
    time-consuming piece of any report tool integration is the design and
    implementation of the reports to be used.
    I hope this helps.
    -Katie
    Katie Tierney
    Quality Management Analyst
    Akili Systems Group
    601 Jefferson, Suite 3975
    Houston, Texas 77002
    Office: (713) 655-1400
    Cell: (409) 255-1643
    "The bitterness of poor quality remains long after the sweetness of low
    price is forgotten" --Larry Anderson
    -----Original Message-----
    From: Robert Brooke-N502365 [mailto:Robert.Brookeca.michelin.com]
    Sent: Monday, February 14, 2000 8:17 AM
    To: kamranaminyahoo.com
    Subject: (forte-users) Reporting tools/components for Forte
    Applications?
    Hi all,
    We are looking for what is currently in the marketplace to enhance the
    reporting
    capabilities of Forte. Ideally, we are looking for component libraries that
    we
    could import into our repository. Do these exist?
    Currently, I have found six reporting tools that are out there. The
    tools
    are Actuate, Crystal Reports, Report Workshop from Indus Consultancy
    Services, Brio Technologies (SQR) VisualBRIO, Visual CyberQuery from
    Cyberscience Corp., and Beacon from Brahma Software Solutions FORTify
    Components. Are there any others for Forte?
    If anyone is currently using one of these Reporting Tools for Forte or
    any
    others, could you give me any indications as to the costs, training, type
    of
    application using the Reporting tool, would you recommend using the
    product
    again, does it use wrappering or API, or is it a component based tool, and
    any
    other relevant information on the product?
    Thanks,
    Robert Brooke
    Application Developer
    Michelin North America (Canada) Inc. CA0/CA1
    PO Box 399
    New Glasgow, Nova Scotia
    B2H-3E6
    Phone: (902) 753-1977
    Fax: (902) 396-2180
    Note: We are currently developing in Forte 3.0.L.2. However, we would
    like
    to select a reporting tool/component within the next month. We are in the
    initial phases of our next project, an application to be developed
    in-house.
    Probably will have two databases, one for real-time data and another one
    for
    archived data. Probably will need reporting functionality and capabilities
    for
    both real-time data and archived data.
    This email and any files transmitted with it are confidential and
    intended solely for the use of the individual or entity to whom they
    are addressed. If you have received this email in error please notify
    the system manager.
    This footnote also confirms that this email message has been swept by
    MIMEsweeper for the presence of computer viruses.
    The E-Mail System is to be used for business purposes only.
    www.mimesweeper.com
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    At 09:33 AM 4/20/01, Rottier, Pascal wrote:
    Forte 4GL is:
    1) A language, TOOL (Compare to Java)
    2) An IDE (Compare to e.g. JBuilder or FJCE)
    3) A collaborative development environment, with central repository (Compare
    to ????)
    4) A distributed application server / object request broker (Compare to J2EE
    servers and/or CORBA)Let's not forget WebEnterprise, Express, and especially Fusion.
    I think, SUN is not al all interested in TOOL.If TOOL were just a language and had no market yet, you are probably
    right. But, not only is TOOL the key to the Forte environment, but it has
    an existing and profitable market. Sun still sells FORTRAN, after all, and
    continues to put money into ADE development for all its language
    products. The real kicker, though, is that I think iPlanet is very clear
    that Fusion, now iIS, is a very key product for them. There may be those
    who wish it were written in Java and who might lobby for doing a Java
    version, but it was clear at the conference that the iPlanet management
    recognize that Java just isn't up to the task at this point. It isn't as
    if all the iPlanet tools are actually written in Java, after all.
    They will only support them for as long as they need.Or, more likely, for as long as they make money.
    Now, in response to Microsofts .NET stratagy. We have yet to see how
    succesfull this will be, but I expect Microsoft to push this down the
    throats of developers and companies quite succesfully.Like they did DCOM?
    =========================================================================
    Thomas Mercer-Hursh, Ph.D email: [email protected]
    Computing Integrity, Inc. sales: 510-233-9329
    550 Casey Drive - Cypress Point support: 510-233-9327
    Point Richmond, CA 94801-3751 fax: 510-233-6950

  • Developer 6i Release 2 for NT - WebDB missing ??

    Hi,
    I have downloaded and installed Developer 6i Release 2 for NT but when I tried to configure the virtual directories I found that the default WebDB Web server/Listener is missing in the downloaded version.
    (But in the installation manual, they mentioned it is available with this download)
    In the Windows-Control Panel-Services, there are only 2 services are installed (Forms Server and Reports Server), But earlier when I installed in my previous project, it included another service "Oracle WebDB Listener", which is missing in this downloaded version.
    Please help me in clarifying my below queries :
    1)For web-deployment of Developer Forms 6i, what are the Oracle products to be purchased ?
    2)Whether Developer 6i Release 2 for NT includes Oracle Default Web-Server/Listener (i.e. WebDB Release 2.2)
    (or) I have to purchase and install Oracle 9i Application Server which includes (Oracle9iAS Portal - WebDB 3.0)
    3)Whether below combination is compatible with each other and supported by Oracle :
    a) Windows NT 4.0 (or) Windows 2000
    b) Oracle8 Enterprise Edition Release 8.0.5.0.0
    c) Developer 6i Release 2 for NT
    d) Oracle9iAS Enterprise Edition
    thanks and regards,
    Shashi
    [email protected]
    FYI: The location of the d[i]Long postings are being truncated to ~1 kB at this time.

    To run Oracle Forms 6i on the Web you need to license Oracle9iAS EE version 1.0.2.
    This includes portal and will automatically configure the Forms installation for you.

  • TS1702 How can i report an app for their coding

    Hi, i just wonder how can i report space ape for making bad game? Their samurai siege constantly have bad coding, one instance where they advice their users to change the device clock to "work around their bugs" and do not advice other of potential harm this could do to the device, leaving quite a few losing their other game progress and work progress. On another instance is how to create a new village. One would assume that you can create the new village if you have new game center, but the server still remember the device if it was once log in. Like atm, i have 1 village on my iphone 5, and im thinking of making a new village on my ipad, but when i installed the game on my ipad, i forgot to log out of the gc, and it continually loading my iphone 5 village on my ipad. I have tried log out, delete, reinstall, etc. one should not have that much trouble trying to get a new village on a new device. Now i have two device logging each other off because of this issue, and still can't get it to give me new village.
    This is bad if i log on my friend's phone to check my village, and she can't create a new game because she is stuck with my village, and i can not play mine if she open the app. This is really stupid coding. Not only these two issuse, the company constantly producing new updates, and pay no attention whatsoever on quality assurance. And i'm fed up with it, as they are continually violating apple rules.
    <Edited by Host>

    Contact the developer.

  • Profit Centerwise report in FBL1N for vendor

    Hi All,
    I have requirement for profit centerwise Vendor GL A/c. This I am not getting in FBL1N. Its because profit center is not getting stored in BSAK & BSIK.
    There are various other reports like: S_AC0_52000888 or through FAGLL03. But these reports are not flexible as FBL1N (like noted items, special GL items, customer items, etc are not there). So tell me how to get profit centerwise report like FBL1N.
    Edited by: Deepak Agrawal on Nov 23, 2009 10:03 AM

    Hi,
    There is no standard report fpr Profit center wise vendor balances like FBL1N.
    You need to Develop report.
    As you said the above report (S_AC0_52000888 ) its good for Profit Center wise Balance Report.
    Regards,
    Kishore K

  • Developer Report 10g - How to generate directly a file ( pdf, html, text etc. )

    hi all gurus,
    this is my first ever post, I am new in the development area and facing a problem.
    I am using Developer 10g, calling report through a Form Module and want to Directly save in file name specified but failed. My code to call report mentioned below for your ready reference. NO Parameter using in Report Module.
    This showing report on Screen instead of giving output file, user have to use Save As command and also there is no file name which I sent to Report Module.
    ---------------------------------- START of CODE -----------------------------
    Declare
      rep_obj         REPORT_OBJECT;   
      v_rep           VARCHAR2(100); 
      rep_status      VARCHAR2(20); 
      v_rep_server    app_server_objects_detail.OBJECT_VALUE%type;
      v_p_action      app_server_objects_detail.OBJECT_VALUE%type;
      v_rep_getjobid  app_server_objects_detail.OBJECT_VALUE%type;
      v_rep_killjobid app_server_objects_detail.OBJECT_VALUE%type;
      v_rep_obj_path  app_server_objects_detail.OBJECT_VALUE%type; 
    BEGIN 
      --------------------------------- setting app server object properties ---------------------------------
      for rec in ( select object_code,object_value
                     from   itmis.app_server_objects_detail
      loop 
         if rec.object_code=1 then
            v_rep_server:=rec.OBJECT_VALUE;
         end if;
         if rec.object_code=11 then
            v_rep_obj_path:=rec.OBJECT_VALUE;
         end if;
         if rec.object_code=19 then
            v_rep_getjobid:=rec.OBJECT_VALUE;
         end if;
         if rec.object_code=20 then
            v_rep_killjobid:=rec.OBJECT_VALUE;
         end if;
         if rec.object_code=21 then
            v_p_action:=rec.OBJECT_VALUE;
         end if;
      end loop;    
      rep_obj := find_report_object('SHORT');  --- report name
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_EXECUTION_MODE,BATCH); 
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_COMM_MODE,SYNCHRONOUS);
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_DESTYPE,FILE);
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_DESFORMAT,:TEXT_BLOCK.REP_FORMAT); -- Form's Text Field
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_SERVER,v_rep_server);
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_DESNAME,:TEXT_BLOCK.FILE_NAME);  -- Form's Text Field
      SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_OTHER,'paramform=no'||
                                                      ' P_SERVERNAME='||v_rep_server||
                                                      ' P_ACTION='||v_p_action);
      set_report_object_property(rep_obj,REPORT_FILENAME,v_rep_obj_path||lower('short.rdf'));
      v_rep := RUN_REPORT_OBJECT(rep_obj);
      rep_status := REPORT_OBJECT_STATUS(v_rep);
      WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
        LOOP
          rep_status := report_object_status(v_rep);
        END LOOP;
      IF rep_status = 'FINISHED' THEN
          WEB.SHOW_DOCUMENT(v_rep_getjobid||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_server,'_blank');
          WEB.SHOW_DOCUMENT(v_rep_killjobid||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_server,'_blank');
      ELSE 
        message('Error when running report', Acknowledge);  
      END IF; 
    EXCEPTION
       WHEN OTHERS THEN
            show_err_msg;
    END;
    ---------------------------------- END of CODE -----------------------------
    Please help where I made mistake.
    Regards.

    thanks for reply.
    but how I can do it? report runtime should call and when it will complete then one can save but again how ? will you please give me an example. I do not want the user to see the output instead report should save in a location which is in  SET_REPORT_OBJECT_PROPERTY(rep_obj,REPORT_DESNAME,:TEXT_BLOCK.FILE_NAME); 
    Please consider, I already have mentioned that I am new in this area. I tried google to search but failed. some PDFs downloaded but nobody has mentioned there to use WEBUTIL package to save this report output.
    Regards.

  • How to develop report

    Can anybody explane me how to develop report in BI Publisher. I have Oracle Databse 10G installed. and BIP Destop is intalled. I am comparing it with Oracle Report Builder. I am use to develop report in oracle report builder.
    I open the MS-Word and there's only a bar with some buttons. Like oracle report builder where to write SQL query, Define functions, Define summary columns etc?

    This is the 64000 dollar question! - the desktop is for building the report template - before you can do that you need to generate the XML data file to be formatted. If you want to replace the output from an existing reports module, then the easiest way is to change the output type to XML, run the report and save the output file.
    This is also a good way to get some practice with the desktop tool.
    If it is a new report, then you have a number of options to generate the XML., such as output from PL/SQL.

Maybe you are looking for