Device error: 400

Hi:
I have a 7290 blackberry and I have a serious problem. I was installing many aplications in my blackberry but when I installed the last aplication,It´s appear in the blackberry screen: DEVICE ERROR: 400.
How I can to fix this problem? Thank you for your colaboration.

HI,
Something is wrong with an application that was loaded.
Here is the article for resolve your error 400:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11136&sliceId=SAL_Pub...
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks   
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • DVD Burning Error: Unknown device error. (0x73, 0x03.)

    I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
    *Errors were found during the burning process:*
    *The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
    I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
    Courtney
    *MATSHITA DVD-R UJ-857D:*
    Firmware Revision: KCVB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    *Hardware Overview:*
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version (system): 1.12f5

    Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
    Laptop is plugged in and fully charged.
    DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
    DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

  • Wavelink timeout error 400

    Hello,
    We are using the Wavelink TE industrial browser.
    I'd like to know how to handle the browser error 400.
    This happens when a user's logon has timed out in SAP.
    I would like to have the scanner go back to the site that is configured in the host profile.
    Right now it stays on the error screen.
    We have the browser menu hidden, so the only way for the user to get back to the URL in the host profile is to re-boot the device.
    There is an option in the emualtion coniguration to re-direct the user to a URL if there is a 404 error.
    Is it possible to do something like this when there is a 400 error?
    Or is there some option in SAP to get around this error?
    Thanks
    Doug

    Hi Doug,
    I found the following SCN thread which raised the same query but was not closed:
    Session Time Out - redirect...
    which links to the following:
    SAP Library - SAP Web Dispatcher
    May need further ICF/ICM expertise if above does not help.
    Regards,
    Oisin

  • Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

    Getting an Error 400 when trying to sign-in to Adobe Photoshop 9.  What is the problem?

    http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Error 400 when attempting to sign in . . .

    to Photoshop.com
    (Photoshop.com services are currently unavailable.  Please try laer or check your network connections.  Error 400)
    I checked to be sure I had internet connection and that there was no firewall blockage - what else should I do (keep it simple, please!).
    I 'tried again' several times over a period of time - no change.
    Also, haven't been able to find a phone number for support - any help here?
    Thanks for any help you can offer!

    You might want to cross post this in the photoshop.com forum, too:
    http://forums.adobe.com/community/photoshopdotcom
    The photoshop.com employees keep a fairly close eye on that forum, so hopefully you'll find someone there who knows what the problem is.

  • Error 400 when trying to sign in

    hi,
    i"m getting error 400 when trying to sign in the iTunes Music store. I'm using a free .mac (so not a full paying .mac acount) account to sign in.
    anyone else seeing this error
    marc
    us store

    Awesome! Thanks for the tip. I was having a similar issue with that error code amd deleting those cookies from Safari fixed it.

  • DVD Burn problem. "Device error - the target device isn't suitable for use"

    Hello everyone,
    I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
    Just thought it was important to report success as well as failure!
    However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
    Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
    I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
    Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
    This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
    So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
    I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
    Justin.

    OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
    system meets minimum requirements
    Project size does not exceed disk capacity
    successfully burned project to DVD folder -thus skip to step 8.
      8.   Using new blank media for burning
      9.   Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
      10.  Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
      11.  Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
      12.  Disabled IMAPI CD burning COM
      13.  DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
      14.  Updated DVD firmware
      15.  Already updated nVidia drivers
      16.  Don't have any other DVD drives to disconnect.
      17.  MPEG workaround. Will resort to if required.
      18.  Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
      19.  Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
      20.  Visit forums to see if other have the same problem. Hi guys
    So still working through some of the items above.
    Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
    What a process.
    Stay tuned.
    Justin.

  • I click on a link inside an email and it won't open so I can print the coupon, response is http error 400 or I have it blocked. Others in my area aren't having any problems with the same link opening but they are using IE. What's up with Firefox?

    gohollywood.com, register, message came back from Hollywood Insider with a link to click on to "Download Coupon". Click on link and you should get the coupon and you print it out. All my friends have done it but I can't. I get various error messages including : "HTTP error 400 - the request is badly formed".... or you have a blocker set.....
    Unless it is a Gmail/Firefox blocker or firewall, I don't have anything set up as a blocker on my email. Had a few friends go in my account on their computers and they had the same thing happen. However when they go in under their names they get to the link with no problems. HELP.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues

    HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated

    Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
    Follow these steps to perform a hard reset on the printer.
    1. Press the Power button to turn on the product.
    2. With the product turned on, disconnect the power cord from the rear of the product.
    3. Unplug the power cord from the wall outlet.
    4. Wait at least 15 seconds.
    5. Plug the power cord back into the wall outlet.
    6. Reconnect the power cord to the rear of the product.
    7. If the product does not turn on by itself, press the power button to turn it on.
    Try that out and let me know if it helps.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Error while configuring GCM: The push settings were not saved. Error 400

    Hi,
    While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
    When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
    I have regenerated the key multiple times but of no use.
    Am I missing something? I am a paid subscriber of Azure
    Thanks, Laks.

    Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
    is no associated hub, you will always get errors when trying to configure.

  • Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

    I am trying to burn a dvd in premiere elements 8.0 but after 96%  iam getting this error :
    "device error-the target device isn't suitable for use."
    I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
    System configration :
    win vista 32 bit .
    Processor :Amd athlon 64 dual core 2.60 ghz .
    Ram :3 gb
    Graphic card :nvidia geforce 6150 se .
    Camcoder model number  :JVC gz-hm320.
    Format :.mts
    Frame size :1920/1080
    Frame  rate :29.97.
    Please look into this problem .
    Regards
    Manoj Khati

    This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
    Things and Software to AVOID when authoring/burning a DVD
    Read all links/sub-links to create a "best" burned disc
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus a Microsoft note http://support.microsoft.com/kb/314060
    And another note http://support.microsoft.com/kb/982116

  • Error message is 'The Request Error : 400' with SAP Download Manager

    Hello,
    The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
    But I could not download below that file.
    SAP_ABA 710 (4~8)
    SAP_BASIS 710 (4~8)
    PI_BASIS 2006_1_710 (4~8)
    SAP_BW 710 (4~8)
    Error message is 'The Request Error : 400' with SAP Download Manager
    I logged on to SAP Service Marketplace, software download area /swdc.
    I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
    I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
    After I choose "Objects for Download", the system starts the download.
    In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.

    Hello,
    In these cases the following things should be checked:
    1.- Please be sure that you are using the latest Donwload Manager version
    2.- S-User and password should be active
    3.- Specify the proxy. Please refer to SAP Note 155954
    4.- It might be that you are not licensed for the product you want to download.
    If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
    1.- The exactly software product name and package or stack number you try to download.
    2.- Attach to the message the results of the trace file generated as per note 574885:
    574885 - Download Manager: Generate trace file for analysis
    I hope this helps you.
    Regards,
    Blanca

  • NO OUTPUT DEVICE ERROR

    Hi Guys Yesterday i reinstalled os x and my audio was working properly.....
    But from today morning i got no output device error.....it also doesnot work in headphones.... someone do help...thank u....

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • I/O device error when trying to backup system image on my K330B running Windows 7 Home Premium

    I set up my Idea Centre K330B to schedule complete system backups to an external HDD once a week.  This worked fine for three months, then about a month ago a scheduled backup failed due to "device error encountered with either the source or the destination (0x8078012D)".  It also gave "Additional information: The request could not be performed because of an I/O device error.  (0x8007045D)"
    I ran chkdsk/r on both the backup drive ( E: ) and the system drive ( C: ) and no problems were found.  The backup drive has plenty of available space.  I tried the backup to a freshly NTFS-formated external drive.  I tried the backup with my BitDefender 2012 Anti-virus disabled. I tried the backup after booting in safe mode.  Nothing works.
    If I specify to backup only C: and not the reserved partition the backup completes with no problems.
    I get the same error condition whether I perform the backup with Windows or the Lenovo backup software.
    Is it possible I have a disk corruption on the reserve partition that is not found and repaired by the chkdsk/r C: operation?
    I'm thinking about saving all important user files and rebooting to the factory settings, but if the reserver partition is damaged I might end up with a dead 4-month-old PC.
    I would greatly appreciate any help or advice as to how to get these backups going again.

    I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode.  Both times it indicated a failed read test on the HDD. The last two tests also failed.  I forget what those tests were called.
    I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

  • I/o device error when trying to use windows 7 backup to an external hard drive

    I have a Windows 7 operating system.  The computer was running very slowly so I used the systems diagnostics at startup and received short DST failed with a failure id of 6C2NXD-53Q713-XD002J-60RL03 for the hard disk test,  the start up test, the
    run-in test.  Each test showed memory test passed and smart check passed.  In researching the error it states that my hard drive is failing or perhaps some program is causing the error.  I tried removing some programs I thought may be the issue.
     Didn't work.
    I have tried using the Windows 7 backup but the backup reached about 67% then states backup not completed i/o device error.  I am trying to back up my files to a brand new Toshiba USB 3.0 & 2.0 external hard drive with 1.0 TB/To.
    I have gone to start then computer and it shows the device.  It also shows some files on it.  The backup fails when it it trying to do a system image as far as I can tell by reading the progress details.  The Toshiba device says that it is
    working fine and is already formatted to NTFS.   
    What else should I check or do?  My computer is also now popping up with a window telling me a backup is needed before the hard drive fails.  It pops up with this message at the same time I am trying to do the backup (the backup is already processing).
    Thank  you

    Hi,
    Have you performed a disk check on your PC? More details, please check here:
    How to Run Disk Check in Windows 7
    Regarding the i/o device error, have you received any specific error IDs like
    0x8007045D?
    In addition, please also take a verify to see if the external disk is Advanced Format Disks(Some types may not compatible with Windows 7):
    For example Run fsutil fsinfo ntfsinfo f:
     to check the
    bytes per physical sector
    of the external disk drive.
    More information, please see:
    An update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with Advanced Format Disks is available
    Hope this may help,
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for