Device Error after activating windows 10

Definitely. Anyone reading make sure you activate windows 10 BEFORE registering your device with skygo

Yesterday i upgraded to windows 10.after i installed i registered my upgraded computer as one of my devices.after watching TV for a while i was looking in my windows settings and realised my windows 10 wasnt activated so i preceeded to activate. after windows activation i went to watch TV again and it asks me to register my device again, but i cant as i registered the same device earlier and thinks im trying to change it again. anyone else have this problem

Similar Messages

Disk Error after BC Windows XP Install on Snowleopard

So when I inserted the Windows XP disc in my mac after it told me to, my computer restarted and installed Windows XP on my newly partitioned 40GB Fat32 drive (it had asked to chnage to NTSF but I selected leave without changing. After installing Windows it said something like "Windows is installed, now restarting", now every I try to boot up with the Windows XP partition by holding down "option/alt" at start up, it goes to the black DOS like screen and says Disk Error, cannot load Windows, press any key to continue". Pressing any key does nothing, so I have to restart, and thus I am at another brick wall.
I downloaded some Boot Camp Snow Leopard Drivers and tried burning the .iso of it to a disc but that wasn't even working, not sure I even need to get to that step yet.
Help?

Got it, was supposed to reformat the drive within the windows installation. Turns out reading the .pdf manual can be helpful....

80246002 error after installing Windows Update Agent 7.6.7600.320

This problem prevents Windows Update from being able to search, download, and install updates.
I am experiencing this issue on machines running Server 2008 R2 and Windows 7 Enterprise (I imagine this an issue with Windows Update and not the OS so this is probably affecting other OS' as well).
This problem is becoming widespread quickly.
The proposed fix (method 1) in the article below did not resolve the problem:
http://support.microsoft.com/kb/958056/en-us
Note: Method 2 is not viable when applying more than one update at a time especially when you are updating multiple machines.
Several others are posting similar problems:
http://windowsitpro.com/windows-update/tracking-error-80246002-windows-update-problem
http://forums.techguy.org/windows-7/1132320-windows-update-problems-4.html
This is preventing scheduled server maintenance from being performed.
Could this be a targeted attack? Happening at the end of the week before a long holiday weekend is not leaving me with a very good feeling...
I would hope that fixing this issue would be a very high priority.
BTW - There is no "Windows Update Issue" forum category that I could find - If there is, sorry for posting in the wrong area.
Cheers,
Jeff

My fix that worked...
Reviewed the operational log for the WindowsUpdateClient (buried in the Event viewer here:
Application and Services Logs -> Microsoft -> Windows -> WindowsUpdateClient -> Operational
After review, I noticed that event 30 "Windows Updates established connectivity" was no longer occurring and that event 42 "There has been a change in the health of Windows Update" was the only thing after the error (Event 25 "Windows Update failed
to check for updates with error 0x80246002")
Even though the machine was restarted after applying the "Windows Update Agent 7.6.7600.320" patch and I had tried restarting the Windows Update service, the service appears to be hung.
Solution:
1.) restart the Windows update service
2.) monitor the operational log for the WindowsUpdateClient (refreshing every 5-10 seconds)
3.) verify that event 30 happens (you should see event 38 after restarting the service followed by (2) event 42, then event 30)
4.) Once event 30 happens go to the Windows update GUI and run the "Check for updates" - yay!
5.) You can go back into the operational log and see event 26 "Windows Update successfully found x updates" followed by an event 40 for each update found.
What is really strange is that I checked the first machine that experienced the problem and it magically fixed itself.
It seems like this may have been caused by DDOS attack on the source for windows updates that the Windows Update service connects to. Or the source location was having maintenance performed.
Regardless, in my case, this was not a problem with the OS or the patch but the inability for the Windows Update Service to establish connectivity.
Hope that helps somebody :)
Cheers,
Jeff

Recently built a new pc, getting a 0xc0000001 error after installing windows 8

I recently upgraded pretty much my entire PC after having my old processor go out. Built a new PC off of a MSI Z77A-GD65 motherboard, which is why I registered on this forum. Pretty much all the parts are new besides my GPU which was somewhat recently upgraded anyways. Anyways I built this PC and everything in functioning perfectly hardware wise but for some reason Windows 8 just doesn't want to boot up after I ran the installer on a fresh hard drive. I keep getting this 0xc0000001 error and I tried all sorts of repair options which I fear may have screwed something up since I am now getting two windows 8 installations showing up.
Anyways I just want to get windows working so any help would be appreciated.

Here is one solution that you might try: http://techmell.net/how-to/fix-error-code-0xc0000001-windows-8/

Office 2013 apps showing templates error after Sysprepping Windows 7 with CopyProfile setting

Here is my setup:
I installed Windows 7 Professional.
I entered Audit Mode (which automatically logged me in as the built-in Administrator user) and installed the entire Office 2013 Professional Plus suite.
In Audit Mode, I opened Word 2013 to get through the "new user" prompts, such as the opening movie that plays in all Office 2013 programs. I did this to ensure that any new users who log into the computer would not need to sit through these "new
user" prompts. I also rearmed Office 2013.
I ran Sysprep with the CopyProfile setting in the Unattend.xml file, with the /generalize switch, and the /oobe switch. The CopyProfile setting copies settings from the built-in Administrator account to any new user who logs into the system.
Both Windows and Office were successfully activated using KMS.
Everything seemed to work, but there is one problem: when any user -- all of which are standard users rather than administrator users -- logs into Windows and runs any Office 2013 program that has templates (such as Word, Excel, and PowerPoint), the templates
on the Start page do not appear. In their place, the following error message appears on the Start page where the templates would normally have been listed:
"Sorry, we had trouble getting the featured templates and can't show them right now."
Below the error message is a link that reads “Work Offline.” If you click the “Work Offline” link, the error message disappears and the templates appear as they should. However, the error message re-occurs when the application is closed and re-opened.
If I login as the built-in Administrator account (i.e., the account I used to modify the default profile), this problem does not occur at all when using Office 2013 programs.
Any ideas?

"logs into Windows and runs any Office 2013 program that has templates (such as Word, Excel, and PowerPoint), the templates on the Start page do not appear. In their place, the following error message appears on the Start page where the templates would normally
have been listed:
"Sorry, we had trouble getting the featured templates and can't show them right now." "
Is there any chance to let you skip the Start page for Office application? I mean that try to open Office application (such Word)and go to File > Options > Untick the option "Show the Start screen when this application starts". Try to re-launch
the application again to check if the error still pop-up. If yes, I'm afraid the default build-in template is corrupted somehow and we need to copy a healthy one from another computer or totally rename normal.dotm documents from %userprofile%\AppData\Roaming\Microsoft\template.
Afte that, please check if the issue still persists.
Here is another thread with the similar topic for your reference:
http://social.technet.microsoft.com/Forums/ie/en-US/09a69d4c-9e5f-489d-ba7b-2af79ff83596/deploying-normaldotm-through-oct-doesnt-work-in-office-2013?forum=officesetupdeploy
http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/can-not-sign-into-office-2013-version/b6951c25-2fb5-4fc1-a667-2327b9da2f7f
Tony Chen
TechNet Community Support

Help me! I get error after install window on bootcamp

I use bootcamp to create usb window 7
But I cannot install window on bootcamp drive
After that, I restart but I get error cannot boot on black screen, help me

You need to select the BOOTCAMP Partition and click on Format. After the Installer formats it from FAT to NTFS, you should be able to install Windows.
These screens from a Mac, which does not have Recovery HD, so the numbering is different.
Reference - https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2

Satellite A305 problem: "No bootable device" error after dropping unit

I'm hoping someone can help me out here. Last night, I went to set my A305 laptop down on the coffee table. During the motion, my dog, which I was stepping over, jumped up and took off which almost knocked me over. When this happened, I lost my grip on the computer and dropped it onto the coffee table at a height of about 2-3 feet. It was in standby mode so I pressed the button to wake it back up to see if I damaged it. The Internet Explorer session I was previously in pulled up, but nothing would happen when I clicked on any browser buttons or links. I shut down the computer and upon restarting, I got the black screen with "TOSHIBA" in red, as usual, and then I got a black screen with this error message: For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.07 (080320)PXE-E61: Media Test Failure, check cablePXE-M0F: Exiting PXE ROMNo bootable device -- insert boot disk and press any key I couldn't get it to do anything else at all, even after several shut down attempts. Does anyone know what could be causing this to happen? Is it a hard drive malfunction as a result from the drop? The unit had worked perfectly for a little over a year up until this point. Any help would be greatly appreciated.

Possible, yes. Can you do it at home, no. Due to the clearances involved you need to do this in a special clean room as the slightest piece of dust or debri that is normally floating around in the air would ruin the platters that the data is stored on. If the drive won't work you'll need to send it to a professional data recovery service to have them do it and the cost of something like that starts at about a grand and goes up depending on the specifics. But before we go there you need to determine if the problem is for sure the hard drive. Enter the bios and check to see if it is even being recognized or not. Also, take the hard drive out and boot to a self booting CD/DVD like a Linux Live CD to verify that the rest of the system is working properly. If it isn't, then the problem might not be the hard drive itself (although the chances of that are about the same as winning the lottery). If the laptop had been off there is a good chance that it would have survived and still worked. But anytime a rotating hard drive sustains any sort of impact shock the chances of it sustaining damage are about 98%.

Error while activating Windows 8 Pro using MSDN Key

I installed Windows 8 Pro on my machine with a key from my friend. Now, I've got my own MSDN key for Windows 8 Pro edition. When I try to change the product key using powershell, I get the following error,
Error: 0xC004F069 On a Computer running Microsoft Windows non-code edition, run slui.exe 0x2a 0xC004F069 to display the error text.
tech trends

I installed Windows 8 Pro on my machine with a key from my friend. Now, I've got my own MSDN key for Windows 8 Pro edition. When I try to change the product key using powershell, I get the following error,
Error: 0xC004F069 On a Computer running Microsoft Windows non-code edition, run slui.exe 0x2a 0xC004F069 to display the error text.
tech trends
Can you not run from a normal command prompt;
slmgr -upk ;uninstalls product key
slmgr -ipk XXXX-XXXX-XXXX-XXXX ;install new product key

Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS

I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.

Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

No Bootable Device error after fresh install

I recently erased the original 80gb hard drive from my MacMini by removing the hard drive from the mini and putting it in a HD enclosure. Afterwards, I erased it using the Disk Utilities on my Macbook Pro before installing Snow Leopard. The installation went error free and was able to load the OS from my MacMini HD that was in the enclosure. However, when I put the hard drive back into my MacMini, I get the "No Bootable Device - Insert boot disk or press any key" message. I repeated the erase and installation 3x but still get the same message.

witch mac mini do you have? is it a G4 or intel?
Is there a reason you pulled the drive instead of just booting to the install disk?
Is the install disk the one that was included with your MacBook Pro? or is it a commercial disk?
Do you know if you partitioned the hard driving using GUID or some thing else?

Device error after cleaninstall of win 8 on Z77 GD65

Hi.
Everything is running perfectly on my new installation, but a little nag is annoying me a bit. I have installed all the Drivers available for GD 65 and win 8. Does anyone have a solution? The only thing i can think of is the drivers for USB 3.0 but they are not available for win 8 on the site.
http://i897.photobucket.com/albums/ac179/Renixen/FejlparingZ77G65.png

Quote from: xmad on 24-November-12, 07:16:18
Check in the bios for intel smart connect and disable it, by default it is enabled.
Thank you

"LogonUI.exe-Application Error" error after Windows update at Win10

I get the LogonUI.exe error after the Windows 10 TP setup. Happening on both upgrade case, and also new install case. The Windows 10 TP was ok at the setup beginning, but this error happening after a Windows update and reboot. Now I cannot logon and cannot
go to the safe mode, seems F8 or shift-F8 has no function. I'm using a T440s NB and checked all hardware diagnostics are good.
stanley

Just a data point... I've gone through the update (install of KB3002675 and KB3001512) and everything's still working. It's not breaking for everyone.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

How to sync with Firefox sync after reinstalling Windows? I only have one device.

Just like this user I was syncing only one device. After reinstalling windows, I can't reconnect and I don't have the recovery key...
What can I do? To access my bookmarks, favorites, etc?
Thanks!

Thanks for the replies. Unfortunately I'm missing the recovery key and don't synch with other devices so I guess that means I'm out of luck...
Maybe this is something that can be added to the roadmap for future improvements. I don't see a reason why you can't get your information back after a reset if you've only got one device.

After installing Windows 7 i am unable to play songs.

After installing 32 bit Windows 7 everytime i play a song it becomes stuck on 0:00, i have gone through all the discussions on the website and have yet to find a solution, i really want to avoid reinstalling itunes.

To anyone who has the same problem, i ended up solving it by updating my sound devices.
After installing Windows 7 the whole computer would not produce any sound. I own a HP laptop so i just went on the HP website and updated the sound devices on my computer which for some off reason furthermore made iTunes play songs again. I dont fully understand the reasons behind this, but it works.
I hope this helps.

Cannot get Itunes to regonize my Itouch. Have tried all troubleshooting tips with no luck. Use to work just fine but not after installing Windows 7 and itunes 10. tried starting mobile device but get error code 193: Oxc.1. Any help out there?

cannot start apple mobile device. error code 193: Oxc.1

Actually my iTunes just started!!!!
So if anyone else is having this problem, the last thing I tried was copying the QTMovieWin.dll from my C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to my C:\Program Files (x86)\iTunes folder and started my iTunes Helper.exe
Hope that can help someone!

Device Error after activating windows 10

Similar Messages

Maybe you are looking for