Device not work correctly
sometime USB port not work correctly, the device only flashes once and then off, the process of "system" increases the CPU to 100%. then I reboot and it works back
What do you mean "the measurement failed"
Can you please provide more details. Like an error code.
Similar Messages
-
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin TalbotPotential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile] -
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer
I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">TAB delimited</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter xml:space="preserve">	</FieldDelimiter>
<Encoding>ASCII</Encoding>
<UseFormattedValues>False</UseFormattedValues>
<NoHeader>False</NoHeader>
<FileExtension>TXT</FileExtension>
</DeviceInfo>
</Configuration>
</Extension>Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Function keys are not working correctly
I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
On the General tab for device status it says: "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)" The only option available when I click
on properties of both devices is Start. When I click on Start for Antilog32, this message shows: "The system encountered the following error when it attempted to start the service: The system cannot find the file specified." For AODDriver4.1, the
message when you click Start on Driver tab is: "The system encountered the following error when it attempted to start the service: The system cannot find the path specified." I do not know how to proceed or
how to fix this, or where to find a solution. Please help!Hello pds48478480,
Do you mean you got the error code 24 in Norton Security Suite Diagnostic Report?
Please share us a screenshot for better analyzation.
Please take a look at the following thread about the AODDriver4.3.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-aoddriver43-service-failed-to-start-due-to-the/cb6b7f03-922b-4b82-972f-e92ef9919964
AODDriver 4.3 is used by AMD OverDrive which tune parameters to help system stability, optimize performance, and control cooling/acoustic characteristics.
With the issue description it seems the driver and the service is either stopped or not working correctly.
Refer to the link below and install the latest version of AMD OverDrive.
http://www.amd.com/en-us/markets/game/downloads/overdrive
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Screen Not Working Correctly- Horizontal Lines
For the past few weeks, when I open my computer, sometimes the bottom half of my screen is just a lot of lines or is not working correctly. Sometimes if I tilt the screen enough, it will go away. But I don't know what to do!
First step in user troubleshooting is to turn the phone off and back on. If that doesn't help, then a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will restart. If this does not solve it, then a restore from backup, and finally if necessary, a restore as a new device.
You do not indicate what iPhone version you have. You also do not say if the phone has been dropped or any user damage to the screen. If anything, you can make an appointment with the Apple Store Genius bar to get the hardware checked. -
Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly
Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
TonyHi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Line-in input not working correctly in Garageband
Problem:
Line-in input not working correctly with Garageband. Problem occurred AFTER installing and using Blue Yeti USB mic, purchased from the Apple store.
System Details:
'07 20" iMac 2.4GHz 4GB RAM, OSX 10.6.5, Garageband '11 v6.0, Logitech Z4 speakers.
Background:
Before using the Yeti USB mic, I used the line-in jack. I'd connect a Shure mic or guitars directly in, but more recently through a 12 channel mixer. Have connected the Shure mic directly into the input jack, and the computer appears to be picking it up (System Preferences->Sound->Input), it is responding correctly there. Have set the output to the headphone (line-out) jack. When I go into Garageband, I can select from Line-in 1, Line-in 2, and Line-in Stereo. The trouble is that it's the iMac's built-in mic that is active (the one above the screen), not the line-in. I've rebooted the computer, checked the connections, reconnected the Yeti mic and I can't find what's causing the problem. Not sure what to do from here, need some help. ThanksI have Logic Express on the iMac as well and I worked out how to set the input device back to the Line-In. I went back to Garageband and found the equivalent setting under Preferences->Audio/MIDI. Thanks for reading, sorry I didn't sort it out sooner! Merry Christmas!
-
Need help iPhone 5 not working correctly
my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync. -
Canon MG3550 is not working correctly
Hello,
I have recently bought Canon MG3550. I installed the driver etc but the printer is not working correctly. Sometimes it prints without any issues but other times it:
- does not pick the printer - saying it's offline even though it's not (this is from laptop, iPad, phone...not just from one device)
- does not print - the error message appears after a while saying that the printer is not responding
- prints half of the page...or just picks up a paper but doesn't print at all
I tried to de-install and re-install the driver etc. but it did not help. The printer is still behaving the same unpredictable way.
Do you have any ideas how to solve it? It is a faulty device or am I doing something wrong?
Thank youYour tags show iPad. You need the iPad 3 or newer in order to have Siri. What iPad do you have?
There are a number of apps that are compatible with Word....Documents to Go, Pages, Quick Office Pro .... You need an app that will read, save and Word files on the iPad and if you don't have such an app, all that you can do is email the file and read it in the email. You will not be able to save or edit the files.
After you download one of this apps, you can use email, DropBox, and IOS file sharing in order to transfer the documents back and forth. You can use iCloud as described above with Pages or any other app that works with iCloud.
Read this to learn more about file sharing.
http://support.apple.com/kb/HT4094 -
Mouse scroll wheel not working correctly.
Just installed Firefox 4 and my mouse scroll wheel is not working correctly. When opening the program, I can scroll as normal for about 5/10 minutes. Then, suddenly, the mouse scroll wheel no longer works. I've since found that it is actually scrolling outside of Firefox. E.g. I had Outlook open and it was scrolling through my Outlook even though Firefox was the open window. I checked this multiple times and it always seems to be the case.
Checked about:config as advised, everything looks correct on the mousewheel settings (i.e everything is set to default). Mouse drivers are up to date. No problems with any other programs. This issue started occurring in Firefox 4 beta. I switched back to 3.6 so I could continue scrolling. Updating to Firefox 4 caused the issue to recur.It seems a lot of people are having problems with the Mighty Mouse's scroll ball. I actually thought I was done for after just a few weeks of using my first (wired) one. But here I am years later with my wireless variant, beeing perfectly happy with it (in case you don't know, the wireless Mighty Mouse is a much better option due to it's laser based tracking system). In my experience, getting rid of fluff that interferes with the ball is quite easy on both types. Try blowing really hard directly at the trackball (optionally while you press it down with some pointed device) a few times. Rotate it and repeat as needed. Alternatively roll the mouse upside down on the microfiber cloth that probably came with your Mac.
-
Blackberry Curve 8520 not working correctly
My Blackberry Curve 8520 is not working correctly. It has worked on and off for about 2 days now.
The first thing to stop was the media files - at first it said the SD card was inserted, but couldn't find any files. I've tried repairing the card. Then it is said there was no card inserted. Have taken out and re-entered the card, and formatted it. It now says there is no card inserted again.
Also, Whatsapp and BBM are not working. I can open them, and can type a message, and press send, but no message actually sends.
Plus the screen keeps freezing, will only work again through a battery pull.
I've had the phone for about 3 months.
Please help!Hello Sarahhelen,
I would suggest backing up and doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
http://btsc.webapps.blackberry.com/btsc/KB10339.
If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?
Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling -
Latest QT & iTunes installed, but not work correctly
I had installed latest version QT7 & iTunes 6.05, however, both of them not work correctly. For QT, it can play video with "looping - delay & sound impediment" audio; the video seems ok. My iTunes has the same problem, I just wonder this is because of QT.
Hope some body can help me to solve this problem.hmmmmm.
quit itunes and/or quicktime.
try opening your Sounds and Audio devices control panel. click on the Audio tab.
in the sound playback area there, click on the "advanced" button. click on the "performance" tab.
try moving the sliders towards full and best. click okay.
check on the sound quality in itunes and quicktime again.
any improvement?
Maybe you are looking for
-
Help iCloud window popping up when replying to my hotmail account saying sign in to iCloud
HI people could someone tell me after the iOS 8 update when I go to reply to my hotmail account a icloud sign in pops up ?? And can this be removed or turned of ?? Any help much welcome Thank you iPhone 5, iOS 8
-
A report showing all release refused purchase orders
Dear SAP Gurus Please assist, I need to run a report showing a list of release refused purchase orders. CN
-
Sharepoint document library file name column in content database?
Hi, How to get a sharepoint document library file name column in content database? Thanks Poomani Sankaran
-
SQL 2012 Trigger bulk insert lock
Hi I have built a proc which basically captures some invalid codes and what I would like to do is use a trigger to fire an email everytime this the table receives information . ;WITH MatchesCTE ( SK_Partial, Matchcode ) AS (SELECT 1, '1234') SELECT
-
In JBuilder 3 I can enter data on a form which is then saved as a .dat file and can be accessed and updated through the form. Linked forms show different data sets. I've tried to do the same in JBuilder 8, but without success. I get the following err