Device registration error in SUP 2.0

Hello Experts,
        I am trying to Register Blackberry device in Sybase control Center -> in Device -> Register. But an internal error occured like,
ERROR Other Thread-170 [javax.xml.messaging.saaj.client.p2p]SAAJ0009: Message send failed
Help me Friends to Solve it,
Thanks & Regards,
Tapan

Go to "Control Panel -> Administrative Tools -> Services" and find the "Sybase Messaging Service" and make sure it has been started.

Similar Messages

  • ISE 1.3 IOS 8.1 Unsupported Browswer Error in Device Registration Page

    I recently upgraded to ISE 1.3.  We are now getting unsupported browser errors in the device registration redirect page on ipad and iphone IOS devices running 8.1.  We are running 7.6 as 8.0 was unstable with ISE1.2.1.  The device registration redirect page worked fine with these same devices in ISE 1.2.1.  Is there a work around short of turning off registration?  The "mydevices" page seams to work, but does not populate the mac addresses of the devices like the device registration page does.

    Are you using Safari or another browser? You need to use Safari as Chrome will show an error message like unsupported browser...
    I did the NSP with an iPad iOS 8.1.1 and ISE 1.3 and it worked fine...
    ISE 1.3 compatibility was just released today and says 8.0 is officially supported; does not mention 8.1:
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/compatibility/ise_sdt.html
    Patrick

  • Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

    I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1.  Can someone help?

    This is NOT resolved.  The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing.  This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
    This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

  • Sybase device registration

    Hello,
    we are at the beginning of evaluating the sybase unwired plattform and stuck in the following situation.
    we created a MBO, deployed it to the supserver, generated the iOS code, included it in your app and now trying to connect to the server with the following settings:
    DEVICE:
    ServerName: myServer.local  (the sup is running in a VM)
    ServerPortSetting: 5001
    CompanyIDSetting: 0
    UserNameSetting: supAdmin
    ActivationCodeSettings: 123
    URL Prefix: /tm?cid=%cid%
    SCC- Device Registration:
    Activation user name: supAdmin
    Server name: myServer
    Port: 5001
    FarmID: 0
    Activation Code: 123
    For the connect we use the following code:
    SUPConnectionProfile* cp = [iMAM_IMAMDB getSynchronizationProfile];
         [cp setDomainName:@"default"];
              // Set log level
         [MBOLogger setLogLevel:LOG_INFO];
         if (![iMAM_IMAMDB databaseExists]) {
              [iMAM_IMAMDB createDatabase];
         CallbackHandler* databaseCH = [CallbackHandler newInstance];
         [iMAM_IMAMDB registerCallbackHandler:databaseCH];
         [iMAM_IMAMDB startBackgroundSynchronization];
         NSInteger stat = [SUPMessageClient start];
         if (stat == kSUPMessageClientSuccess) {
              while([SUPMessageClient status] != STATUS_START_CONNECTED){
                   [NSThread sleepForTimeInterval:0.2];
                   NSLog(@"wait for connection to the sup server!");
              [iMAM_IMAMDB beginOnlineLogin:@"supAdmin" password:@"s3pAdmin"];
              while([iMAM_IMAMDB getOnlineLoginStatus].status == SUPLoginPending){
                   [NSThread sleepForTimeInterval:0.2];
                   NSLog(@"wait for connection to the sup server!");
    the problem is, that we are currently not leaving the first while loop, means we do not get a connection to the supserver. In the scc i do not see any incoming requests of my device - "Activation still pending"
    Any clue what causes this strange behaviour?
    Are there any further sybase monitoring capabilities which helps me to get more information about this?
    In general the sybase scc can be reached by the device, which means that that the tcp channel is open.
    We are running on sybase 1.5.5 and iOS 4.2.
    Looking forward to share my experiences with you here.
    Jens

    Hi, try to use same server name in scc (myServer.local).
    The program run on the device or on the simulator? Try to telnet myServer.local on port 5001
    If still not work try this:
    if (result == kSUPMessageClientSuccess) {
              [iMAM_IMAMDB asyncOnlineLogin:@"supAdmin"
    password:@"s3pAdmin"];
              while([databaseCH loginSuccessCount] < 1) {
    [NSThread sleepForTimeInterval:1];
    [window addSubview:navController.view];
    [window makeKeyAndVisible];
    } else
    [self showNoTransportAlert:result];
    Edited by: Alessandro Iannacci on Apr 6, 2011 10:43 AM

  • ISE 1.2 device registration with MAB only, no client provisioning

    Hello,
    Is it possible for AD users (no guest users) to walk through the Device Registration Self Registration without Client Provisioning ?
    I do not want to push certificates or native supplicant profiles to client devices.
    I would just want AD users to register their MAC address, if MAC is not known. Add the MAC to some sort of group.
    Then if MAC is known (in this group), skip registration and allow full access to the VLAN.
    Right now, i am stuck on the registration portal that says "The system adminstrator has either nog configured or enabled a policy for your device". ?? It is true that my Client Provisioning screen is empty.
    Am i really obliged to use native supplicant provisioning to register my device ?
    GN

    Hi
    Device Registration web auth is a process where you can configure user without client provisioning.
    In this scenario, the guest user connects to the network with a wireless connection that sends an initial MAB request to the Cisco ISE node. If the user’s MAC address is not in the endpoint identity store or is not marked with an AUP accepted attribute set to true, ISE responds with a URL redirection authorization profile. The URL redirection presents the user with an AUP acceptance page when the user attempts to go to any URL.
    1. A guest user connects to the network using a wireless connection and has a MAC address that is not in the endpoint identity store or is not marked with an AUP accepted attribute set to true, and receives a URL redirection authorization profile. The URL redirection presents the user with a AUP acceptance page when the guest user attempts to go to any URL.
    2. If the guest user accepts the AUP, their MAC address is registered as a new endpoint in the endpoint identity store (assuming the endpoint does not already exist). The new endpoint is marked with an AUP accepted attribute set to true, to track the user’s acceptance of the AUP. An administrator can then assign an endpoint identity group to the endpoint, making a selection from the Guest Management Multi-Portal Configurations page.
    3. If the guest’s endpoint already exists in the endpoint identity store, the AUP accepted attribute is set to true on the existing endpoint. The endpoint’s identity group is then automatically changed to the value selected in the Guest Management Multi-Portal Configurations page.
    4. If the user does not accept the AUP or an error occurs in the creation of the endpoint, an error page appears.
    5. After the endpoint is created or updated, a success page appears, followed by a CoA termination being sent to the NAD/WLC.
    6. After the CoA, the NAD/WLC reauthenticates the user’s connection with a new MAB request. The new authentication finds the endpoint with its associated endpoint identity group, and returns the configured access to the NAD/WLC.

  • ISE 1.2 Device registration problem

    I'm trying to get the device registration to work, but keep getting "Device not supported" or "Unable to obtain the user information".
    I cannot seem to find any information on those errors from the manuals.
    What are the possible solutions to get it working ? If the device is not supported, does it mean, that the profiling failed or something else ?
    ISE 1.2

    Hi Harri,
    What kind of authentication are you doing for these users? MAB, Dot1x? Also is this issue seen with all devices, or just a few ( i.e. same type, same vendor...)?
    If this is self-registration for guest users, there is a known issue with using Custom Guest Portal. The defect details are given below :
    https://tools.cisco.com/bugsearch/bug/CSCui77336/?reffering_site=dumpcr
    Therefore if you are using the custom portal, can you instead try with a default portal?
    Thanks,
    Aastha

  • Toshiba registration error

    Hi
    I'm trying to register my Tablet which was purchased in Latin america in Toshiba website (http://www.csd.toshiba.com/sup/jsp/taisreg/registrationSerial.jsp). However, after submitting all my purchase details and personal information I get a message error "Got Exception communicating w/GEDB web service" and the process can't be completed.
    Could you please help me with this problem, please?
    Regards
    Solved!
    Go to Solution.

    Hi Peter, I needed a core i3 laptop urgently for my research and website development suite so I went to one of the Retail shops in Accra Ghana to get a brand new laptop. After removing it from it box and booting it there was a pop up which asked me to register the machine but the feedback I get after submitting is registration error. Since I did not buy the machine with a credit card from Toshiba and only bought it from a retail shop in Accra Ghana, what is the way forward for me to get the brand new machine registered?.
    Regards.
    Research / Computing Associate
    Institute of Development &Technology Management
    Ghana

  • "drm device registration failed" Verizon Media Manager android tablet

    I get the error "drm device registration failed" using Verizon Media Manager on an android tablet.  Any ideas?

    Poodles wrote:
    I get the error "drm device registration failed" using Verizon Media Manager on an android tablet.  Any ideas?You get this error if the device is "rooted" (meaing you have full root access).  There is an app in the Google Play Store that will temporarily allow you to un-root the device, and when done the registration will work.   I use OTA RootKeeper to temporarily un-root and then re-root.  The device must be un-rooted each time you attempt to use the Verizon Medai Manager app to view content.

  • ADFS Device Registration

    I have one application proxy and one adfs server. Right now normal sso works (utilizing Office 365 services). I am trying to configure two-factor using device registration. I was able to join an internal computer using Workplace join.
    I am trying to install an iPhone that's connected to the public internet. I can get to the otaprofile fine, but when I click install I get an error saying "A connection to the server could not be established." I ran the update command on my proxy
    server. Backend servers are enabled and initialized.
    In my certificate, I added enterpriseregistration as a SAN. My common name is sts.companyname.com. Public dns is CName from enterpriseregistration to sts. STS is A-record points to proxy server. Proxy server is using hosts file to get internal servers.
    Any thoughts? Am I missing something?
    -- Michael

    Hello,
    please see
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/195399e6-b5dd-46cf-a351-228bd62b24d8/adfs-specific-question-post-on-the-adfs-forum?forum=winserverDS
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • REGISTER_DEVICE error ---- Registration error---- CX_XSLT_RUNTIME_ERROR

    Hi,
    I have created a new logical device on doe and enabled it and I've performed all the steps mentioned in
    [Mobile-- overview of steps|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm].
    Also I've defined the attributes in SDOE_DEV_REGISTER.
    Now I'm trying to register the device using 'REGISTER_DEVICE ' API .But it is showing an error 'Registration error'.
    When I debug it , the error is in CALL TRANSFORMATION and the error is " An exception (CX_XSLT_RUNTIME_ERROR) occurred"
    I'm stuck with this error.Please let me know how to resolve this.

    I've been trying to pass the exact path of xml file,which is a blunder.Instead we have to covert the whole xml file into Xstring format and then pass it to Register_device API

  • SMP3: What about licensing & Number of device registrations?

    Hi All,
    As we all know that SMP3 SP03 is GA now. And most of us have started working on the same. While installation of SMP3 SP03 runtime, it does not ask about license type like the way we have seen while installing of SMP2.3 or earlier version (SUP 2.x)
    e.g.
           For Personal Developer Edition: Allows a max of 5 client devices
           For Enterprise Developer Edition:Allows a max of 20 client devices and so on.
    As per current SMP3 binaries, a single downloaded SMP3 setup can be installed on as many number of machines. What could be the SAP's objective if there is no such license type information available for server installation?
    How we will ensure about max number of client devices registration against a particular server?
    Regards,
    JK

    I've asked the person who is seeing 38 digits to test. I'll report the results.
    Somebody else tried the copy/paste method too and it gave 40 digits, but she was also seeing 40 digits in iTunes.
    It seems some people are just seeing 38 digits in iTunes, so the thing to confirm still is whether or not those people can successfully copy/paste all 40 digits.
    Thanks,
    doug

  • How do I skip the Device Registration Portal for Cisco ISE web portal

    I have set up a sponsor and guest portal system for wireless guest access to the internet using ISE v1.2.0.899 virtual and WLC 5500 runninng 7.4. After logging into the intial page, the guest user is directed to the Device Registration Portal. Entering a MAC address value puts the user in a continuous failing loop. But, if they just hit the "continue" button at the bottom of the page, they will be directed onward and have internet access as was intended. I have no requirement for guest users to register their devices. What do I need to do to remove the device registration portal from the log on sequence for guest user access? Thanks!

    Hello Scoot,
    you make a list of the MAC add of coperate devices. and set a rule if authentication doesn't happen only these devices can do the self  registration.
    I hope this works for you

  • Error message on reading device saying error dialog user not activated

    error message on reading device saying     error dialog  user not activated.  unable to open book to read

    I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a  MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
    the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

  • Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

    Hi S9 installation Gurus,
    Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
    Detail of Problem:-
    After Susessful configuration of
    1) Foundation Services (Hyperion Shared Services)
    2) Essbase administration services
    3) Essbase Server
    4) Hyperion reporting and analysis
    5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
    Error Point: when i tick ckeck box in front of Product instance registration
    click next
    create instance
    click next
    instance name-Plan1
    Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
    server port: 8300 (system suggesting)
    tick on active instance
    click next
    Error Pop Up "System Failure: Error while retrieving xml file from database"
    Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=puser
    SYSTEM_DB_PASSWORD=GGAKFJ
    SYSTEM_DB_CATALOG=p1db
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    Note: puser (SQL Authenticated user)
    Thanks
    Kumar
    Edited by: user10385300 on Dec 4, 2008 5:44 AM

    This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Registration error in Jdeveloper while registering the portlet

    Hello All,
    As per the Tutorial for Oracle WebCenter Developers 11g Release 1 (11.1.1) E10273-01 guide . I am creating the sample application. I have created the portlet and deployed it on integrated weblogic server and created the connection too in the portal application.But when i am dragging the Products portlet onto the cust:PanelCustomization then it gives error.
    Registration Error :- An error occured while trying to register the portlet producer products
    and the error details are :-
    oracle.portlet.client.container.PortletException: oracle.portlet.client.persistence.PersistenceException: Error creating MDS MO : typeName=wsrpProducer mdsId=/oracle/adf/portlet/Products.pxml
    * at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerWSRPProducer(PortletProviderManager.java:2024)*
    * at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerPortletProvider(PortletProviderManager.java:1582)*
    * at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerPortletProvider(PortletProviderManager.java:545)*
    * at oracle.adfdtinternal.model.portlet.wizards.registration.wsrp.WSRPProducerRegUtil.registerProducer(WSRPProducerRegUtil.java:308)*
    * at oracle.adfdtinternal.model.portlet.wizards.registration.wsrp.WSRPProducerRegUtil.executeAppProducerRegistration(WSRPProducerRegUtil.java:189)*
    * at oracle.adfdtinternal.model.portlet.wizards.registration.common.ProducerRegUtil.registerProducerWithAppForPortletDrop(ProducerRegUtil.java:293)*
    * at oracle.adfdtinternal.model.portlet.datatransfer.PortletNodePluginInfo.constructPortletDocumentFragment(PortletNodePluginInfo.java:525)*
    * at oracle.adfdtinternal.model.portlet.datatransfer.PortletNodePluginInfo.getData(PortletNodePluginInfo.java:132)*
    * at oracle.bali.xml.model.datatransfer.operation.CreateFromFragmentOperation$1.performTask(CreateFromFragmentOperation.java:52)*
    * at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)*
    * at oracle.bali.xml.model.datatransfer.operation.CreateFromFragmentOperation.apply(CreateFromFragmentOperation.java:42)*
    * at oracle.bali.xml.model.datatransfer.operation.OperationProcessor._apply(OperationProcessor.java:393)*
    * at oracle.bali.xml.model.datatransfer.operation.OperationProcessor._forceSimpleApplyImpl(OperationProcessor.java:346)*
    * at oracle.bali.xml.model.datatransfer.operation.OperationProcessor.forceSimpleApply(OperationProcessor.java:293)*
    * at oracle.bali.xml.model.datatransfer.operation.OperationProcessor.forceSimpleApply(OperationProcessor.java:243)*
    * at oracle.bali.xml.gui.swing.dnd.DropHandlerHelper._doRegularDrop(DropHandlerHelper.java:273)*
    * at oracle.bali.xml.gui.swing.dnd.DropHandlerHelper.performDrop(DropHandlerHelper.java:87)*
    * at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:158)*
    * at java.awt.dnd.DropTarget.drop(DropTarget.java:434)*
    * at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:500)*
    * at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:812)*
    * at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:736)*
    * at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)*
    * at java.awt.Component.dispatchEventImpl(Component.java:4487)*
    * at java.awt.Container.dispatchEventImpl(Container.java:2099)*
    * at java.awt.Component.dispatchEvent(Component.java:4460)*
    * at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)*
    * at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4309)*
    * at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)*
    * at java.awt.Container.dispatchEventImpl(Container.java:2085)*
    * at java.awt.Window.dispatchEventImpl(Window.java:2478)*
    * at java.awt.Component.dispatchEvent(Component.java:4460)*
    * at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)*
    * at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)*
    * at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)*
    * at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)*
    * at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)*
    * at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)*
    * at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)*
    Caused by: oracle.portlet.client.persistence.PersistenceException: Error creating MDS MO : typeName=wsrpProducer mdsId=/oracle/adf/portlet/Products.pxml
    * at oracle.portlet.client.persistenceimpl.mds.MDSPersistenceContext.create(MDSPersistenceContext.java:576)*
    * at oracle.portlet.client.beanimpl.persistence.PersistenceBeanFactory.create(PersistenceBeanFactory.java:213)*
    * at oracle.portlet.client.beanimpl.persistence.PersistenceBeanContext.create(PersistenceBeanContext.java:98)*
    * at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.newProducer(WSRPClientImpl.java:3395)*
    * at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.register(WSRPClientImpl.java:155)*
    * at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.createProducer(WSRPClientImpl.java:3155)*
    * at oracle.portlet.client.containerimpl.wsrp.WSRPProducerFactoryImpl._createProducer(WSRPProducerFactoryImpl.java:130)*
    * at oracle.portlet.client.containerimpl.wsrp.WSRPProducerFactoryImpl.createProducer(WSRPProducerFactoryImpl.java:107)*
    * at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerWSRPProducer(PortletProviderManager.java:1976)*
    * ... 38 more*
    Caused by: oracle.mds.exception.ReadOnlyStoreException: MDS-01273: The operation on the resource /oracle/adf/portlet/Products.pxml failed because source metadata store mapped to the namespace / BASE DEFAULT is read only.
    * at oracle.mds.core.MDSSession.checkAndSetWriteStoreInUse(MDSSession.java:2211)*
    * at oracle.mds.core.MDSSession.createMetadataObject(MDSSession.java:478)*
    * at oracle.portlet.client.persistenceimpl.mds.MDSSessionWrapper.createMetadataObject(MDSSessionWrapper.java:227)*
    * at oracle.portlet.client.persistenceimpl.mds.MDSPersistenceContext.create(MDSPersistenceContext.java:572)*
    * ... 46 more*
    Please help!!!

    sorry for the late reply. Yes I have checked all and see everything is fine there. Still not sure what cause this.
    I have now installed 11.1.1.4.0, which is working fine.
    --VipC                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for