Dfm alerts for operationallydown

Hi All,
im having lms 4.2.2 and monitoring a cisco 7600 router interface ten gigabit ethernet x/x under dfm. When ever the interface is down due to any media issue i am not getting any alerts in dfm., the interface used to go down for more than 10 minutes. I am able to do an snmpwalk to this interface when the interface was down and getting the value as 2(for down). I am getting other information and configuration mode alerts in dfm for this device. please help to fix the problem.

Can you verify that the interface is managed for monitoring the faults? Go to
Monitor > Fault Settings > Setup > Fault Device Details
    select the device in the "Device Selector" and click "View"
    in the table that opens, there is a column "Device Name"; in this column, click on the device name and a new window opens with "Device Details"
    search the interface and check, that the mangement state is "true"

Similar Messages

DFM Alerts for B-channel backup on Fax

Hi, every time a fax gets sent, this alert is coming from LMS, as the router b-channel interfaces come up.
LMS is complaining that a backup interface had to kick in on the gateway router, and clears after about 5 minutes. I see the router up/up for this duration, then up/down and status cleared.
I have no experience with voice yet, but am assuming this is normal behaviour for call setup and teardown when a fax is sent, right? Should I ignore this and turn off the DFM alert?
EVENT ID                = 000019U
ALERT ID                = 00000U2
TIME                    = Tue 22-Feb-2011 14:48:23 EST
STATUS                  = Cleared
SEVERITY                = Informational
MANAGED OBJECT          = 172.20.103.5
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = BackupActivated::Component=IF-172.20.103.5/38 [Se0/0/0:9];ComponentClass=Interface;ComponentEventCode=1008;Type=DS0;IsFlapping=false;AdminStatus=UP;MaxSpeed=64000;OperStatus=DOWN;InterfaceCode=ISDNBCHANNEL;Mode=BACKUP;DuplexMode=FULLDUPLEX;LastChange
CUSTOMER IDENTIFICATION =
CUSTOMER REVISION       = 01
Thanks for any help.

By default, DFM classifies ISDN interfaces as dial backup. Obviously this is not the case for this fax interface. You can configure one of the DFM customizable interface groups to match this particular ISDN interface, and then prioritize that group so that it comes before the built-in Dial Backup group. After applying the changes, this event should stop being generated.

DFM alert for shutting down a port?

I am using LMS 3.2, and when are shutting down a port, I don't receive any alerts. Is there any alert for administratively shutting down a port of a device?

DFM criteria for a interface down is
ifOperStatus = down and ifAdminStatus = up. If you down the interface then ifAdminStatus will be down and not up, so DFM does not treat this an alarmed event.

Lms 4.x dfm alert oper/unresp.

Hi,
few of the interfaced in routers switches went down and the alarm was not displayed in lms 4.2.3 dfm activities pages..
my observation was that, there were unresponsive alarms generated, and according to my knowledge untill that interface becomes available for "icmp and snmp" no more alarms will not generated if that interface goes down..
should it generate operationally down alert before getting unresponsive alarm.??
in case A, i used to get operationlly down alarm and in 3 mins, unreponsive alarm
in case B, i get only unresponsive alarm only.
can some one clarify my doubt.??
regards
Rajesh

Following is the detail of both the alert for DFM :
OperationallyDown:
OperationallyDown
Description:
Interface— Operational state of a card or network adapter is not normal.
System Hardware—Disk's operational state is not normal.
Trigger: Polling, or processed trap (see Processed SNMP Traps).
For interfaces, LMS will only generate an OperationallyDown clear event if the card is reinserted into the same slot, and if the module index is the same before and after the card is reinserted.
Severity: Critical.
Device Type: All.
Event Code: 1018.
Component Codes:
•Disk: 1077.
•Port: 1076.
•Interface: 1075.
•Chassis: 1074.
•Card: 1073.
•On any other Component: 1072.
Unresponsive:
Unresponsive
Description: Device does not respond to ICMP or SNMP requests. Probable causes are:
•On a system: ICMP Ping requests and SNMP queries to the device timeout received no response.
•On an SNMP Agent: Device ICMP ping requests are successful, but SNMP requests time out with no response.
A system might also be reported as Unresponsive if the only link (for example, an interface) to the system goes down.
Trigger: Polling.
Severity: Critical.
Device Type: All.
Event Code: 1022.
Component Codes:
•Router: 1101.
•SNMP Agent: 1100.
•Incharge Broker: 1099.
•IP: 1098.
•Hub: 1097.
•Host: 1096.
•HTTP Service: 1095.
•FTP Service: 1094.
•Duplicate IP: 1093.
•DLCI: 1092.
•Bridge: 1091.
•Application: 1090.
•On any other Component: 1089.
-Thanks

Why is ical creating unwanted alerts for all-day events?

If anyone can point to what might be going wrong here I'd be grateful. This is becoming a daily irritant. I have a number of all-day events listed for most week days in my diary which help me to know what is happening that day with childcare for my son. I don't need alerts to be reminded of these - they are just notes I put to myself in adavnce that let me know how my day is configured. Now, I sync my ical from my home imac to my work imac, my macbook, my iphone and my ipad. On none of these devices do I have default alerts set. I never set any alerts for any of these 'events'. But then, at 9am the day before each one I get an alert. In fact, I get a 9am alert for any all-day event, regardless of whether I set an alert for then, or at all. As I say, I've checked all devices and the default alert a=on all is set to 'none'. Does anyone know why this is happening and how I stop it?

Thanks Malcolm.I'm afraid this issue started for me after updating to iOS6!

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

How do I stop receiving two alerts for a text??

When I receive a text if I do not view or clear the message within 60 seconds I receive another ding or alert for the same text 60 seconds later. How do I edit my messages so I only receive 1 alert per text??
Thanks

Go into Settings - Noitifcation Center - Messages - Repeat Alerts set to Never

Formula to calculate SUM of multiple sheets of excel and the result to be stored in another excel sheet and pop up alerts for multiple rows

I have a excel with multiple
sheets with data as shown below
SHEET 1
A 1
B 2
C 3
SHEET 2
B 1
C 2
A 3
SHEET 3
C 1
A 2
B 3
My
query is splitted into 3 categories
I want to have a formula to do math calculation such that data of "A" of SHEET 1 is calculated with "A" of SHEET2 irrespective of the location of "A".
When I include SHEET3, the formula should automatically identify the location of "A" or "B" or "C" and give the result corresponding to A, B or C. Since I want to bifurcate daily report and output printed. I want to use another
excel for output. How to link multiple sheets of one excel and print the output of above in
another excel?
Assume, I have 4 SHEETS, "SHEET 1", "SHEET 2", "SHEET 3" and "SHEET 4". Math calculation need to be done using all 4 sheets. If
I include "SHEET 5", the formula should ignore SHEET 1 automatically and give the results of SHEETS 2 to 5. Similarly, if I include SHEET 6, SHEET 1 and 2 need to be ignored for further calculation and SHEET 3-6 need to be used. How to write
such formula?
How to get pop up alert for multiple rows, if a specific condition is hit?

Maybe VBA Code should be a good option for you. I suggest you post you issue to
Excel for Developers forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Best Regards,
Wind

How to set up alerts for mobile email on Samsung Reality?

Hi,
I was wondering how we could set up to receive automatic alerts for new incoming emails on a Samsung Reality?

Here is how to enable your alerts.
1. From the Mobile Email application, select the desired email account then press the center of the 5-way navigation pad to choose Select.
If prompted enter the username and password, then press the center of the 5-way navigation pad to choose Sign In.
2. Press the right soft key to choose Options.
3. Select Settings then press the center of the 5-way navigation pad to choose Select.
For AOL / AIM select Preferences.
4. Select the desired setting then press the right soft key to choose Save.
To disable the email alerts:
Select Disable or Never.
To enable email alerts:
Select Enable or Always.
To receive email during a desired time interval:
Select Only During then enter the desired time interval.
This setting may not be available on all handsets or accounts. Hope this helps

Multiple alerts for the same Message ID

Hi
I have configured outbound ftp adapter. I have configured alerts inorder to capture any error in the adapter engine.
Now,alert is triggered showing an error in the ftp adapter ( say incorrect ftp details). But i get multiple alerts for the same message ID several times. I have also set the parameter Max No od Delvs to 1 in the ALRTCATDEF transaction.
I keep getting the same alert number of times a day. How can i restrict the number of alerts to 1 for 1 message ID.
Regards,
Vani

Hello Andreas,
Thanks for your reply.
In my scenario i would need an alert per Message. That is the reason why I have not checked the option "Supress Multiple Alerts" since it would allow only alert per rule.
Is there is any way we can get one alert per message.
Also, after correcting the eror in the file adapter will the file which was not placed due to error in the adapter be placed automatically. I wanted to know what would happen to the lost file or unprocessed file since it dint reach the destination due to error.
Regards,
Vani

Is there a way to set an alert for every event in a single calendar?

Hi all,
Is there a way to globally set an event in just one of the calendars showing in iCal?
For example, I have a "Birthday" Calendar with a bunch of birthday events. I want to set the alert for all of them to, say, noon, without having to edit each and every one.
Thanks!
Greg

To generally add an alarm to all events in a specific calendar you would need to program an Automator Workflow that passes all events of the calendar to an Applescript that adds the alarm.
For your birthdays problem is a predefined solution iCal: If you enter the Birthdays on the cards in your Address Book, and enable the "Show Birthdays Calendar Flag", then you will receive automatic email notifications of upcoming birthdays.

Why do I keep getting alerts for shared calendars?

I have a calendar set up in Calendar, it syncs with iCloud.
My wife has a clanedar set up in Calendar, it syncs with iCloud.
Both calendars are shared, so we can see what the others availability is on a given day at a given time.
But why do I keep getting alerts on my iPhone (and only on my iPhone) for my WIFE's events? I've turned off the "show shared calendar events" button in the calendar preferences on my iPhone, but I'm *still* getting alerts for all her events. I don't need this, I don't want this, I turned it off... why is it still happening?
My iCloud calendar is defaulted to my calendar. I do not get alerts on my iMac for her events, only on the iphone. Can anyone help? I never want to see her events unless I manually go and look at them on my calendars or in iCloud calendar.

Your System Details list shows that you use a Firefox 31.0 release.
That is not the current release.
The current release is Firefox 34.0.5.
If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 34.0: https://www.mozilla.org/en-US/firefox/all/
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Why isn't my iPad 2 giving me alerts for my all-day events?

Why isn't my iPad 2 giving me alerts for my all-day events? I have alerts set-up for 2 days prior. My alerts work for other calendar entries where they are set-up for 15mins prior.

The laptop has a more powerful wifi radio then the iPad. Try getting closer to the location where iPad can connect.

Dfm alerts for operationallydown

Similar Messages

Maybe you are looking for