DFSR or DFS-R not being accelerated on WAAS

We would like to be able to run backups only in our primary datacenter. So we are replicating 150 gigabytes of data across a 1.5Mbps link. This process should take a little less than 2 weeks to replicate the data. We have a Cisco WAAS 274 in this location.
Now, optomized traffic is greater than original traffic while we are running this replication. There are multiple connections taking place, it appears that the DFS-R protocol, opens a connection, sends a single file, then closes that connection, opening a new connection for the next file it is sending.
There are multiple (Four to Seven) connections from the DC to the remote site server on port 1330 and one to two connections from the remote server to the DC on port 57327.
The remote site server is Windows 2003 R2 the DC server is 2008. There is a setting in 2008 to NOT compress the data, but I do not see a setting in 2003 to not compress the data. It is showing up as TDL acceleration, but I am thinking I need to remove DRE from this accleration, possibly LZ as well. I do not think I want to put it as pass through. I can not seem to find a best practices for this and would appreciate any assistance you could give me.
I will go ahead and configure a policy for TCP Optomization and LZ compression. And see how that goes. If you have any advise on this, your comments would be greatly appreciated.

That is exactly what I ended up doing, a policy labeled DFSR, with destination start ports 1330 and 57327, with the "Replication" application group, so it will show up as "replication" data in the graph as opposed to "other-data"
With TFO only, it is still showing the Optomized data as being slightly greater than the Original data, which is better than how it was with DRE enabled and it was showing Optomized as being 20%+ greater than Original Data. I tried it as Pass-through, but then I had latency issues. TFO only is the best option.
Also, in DFSR, I was able to find a setting to completly remove the Compression, but there is no way (at the present time) to remove the Encryption.

Similar Messages

DFSR - Deleted files not being deleted on remote servers

Hi All,
I have a central file server replicating its data to 2 remote files servers with read only shares.
When a file is deleted on the central server, the files are not being deleted on the remote servers. New files on the central server are replicating fine.
Why is this and how do I fix it?
Thanks Christoph

Hi Christoph,
Can you provide "delete" permission on remote share and see if it works?
Thanks,
Umesh.S.K

[Solved] Xorg log says Option "AccelMethod" is not being used

I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)

The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.

CD's Not Being Recognised in iTunes 10.5

Hello,
I have installed the new version of iTunes (10.5) and everytime I put in a cd into my drive to import/rip into my library and iPod, the cd is not being displayed in my devices and not accessing gracenotes. I have the checkboxes ticked to automatically get the track names from the Internet and the when cd inserted option is selected to ask to import.
The only way I can get iTunes to recognise the cd is if I close down iTunes and re-start it again.
Is this a bug in 10.5 or is there something I can do to fix it?
Thanks,
Paul.
Below is the output from my diagnostics:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. XPS M1530
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001AABFC03272248
Current user is not an administrator.
The current local date and time is 2011-11-06 16:48:02.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8600M GT
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: TEAC DVD+-RW DVW28SLC, Rev A.06
Audio CD in drive.
Found 8 songs on CD, playing time 55:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:34
Track 3, start time 15:03:68
Track 4, start time 22:03:03
Track 5, start time 26:45:02
Track 6, start time 33:18:60
Track 7, start time 38:38:70
Track 8, start time 47:21:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   4 10 16 20 24.
The drive CDRW speeds are:   4.
The drive DVDR speeds are:   4.
The drive DVDRW speeds are:   4.

I have the same problem, that when iTunes is open it does not recognize when a CD is inserted. I don't have an answer but I have a workaround that may be similar to yours.
The problem occurred the first time I tried to import a CD after having updated iTunes on October 12. I think this is the first version to support iCloud (which I don't use). That version did not have a Help Menu. I reinstalled iTunes and now have 10.5.0.142. I did get a Help Menu but still no recognition of CDs.
I can import CDs if I close iTunes and let AutoPlay take over. I have AutoPlay set to "Import songs using iTunes". "Show songs using iTunes" is closer to the setting you want. When the CD is inserted AutoPlay opens iTunes and iTunes sees the CD.
Dell Studio XPS 435T
Windows 7 Home Premium Service Pack 1
iTunes 10.5.0.142

HBOgo "StageVideo is not being used"

I just updated flash today, November 25 2013, which gives me version 11,9,900,152. The problem I'm having seems specific to the HBOgo.com site.
The problem occurs in all three browsers that I've tried, Firefox (my preferred browser), Chrome, and IE 9. Also, I've tried the various suggested troubleshooting suggested on the Adobe site as far as enabling Flash addon in IE after disabling (unchecking) the choice for ActiveX filtering. I've tried uninstalling/reinstalling all 3 browsers, reinstalling flash, resetting all video card settings to default, going through the Device Manager and uninstalling the device entirely, making sure it has no errors or conflicts anywhere and the same thing for the network devices, they all indicate that they are working properly.
My device is an HP Pavilion dv7 Notebook PC running Vista Home Premium Service Pack 2. It has 4 GB of memory and the video card is an NVIDIA GeForce 9600M GT. The drivers are all up to date and so is every application and its associated add-ons that I will mention. Also, it shipped with a Blu-Ray player which I've used to display Blu-Ray content on an external monitor with no issue. (If it can do that, then shouldn't it just be some software issue preventing it from playing back a video stream of inferior quality from hbogo?)
Regarding Flash Player, I've watched videos on YouTube and Hulu (and countless other sites which stream Flash Video) at resolutions of 720 and 1080 which played at framerates between 25 and 30 fps and which also did not use hardware acceleration but nevertheless maintained CPU usage of less than 70%. So, the computer can certainly do it even without the help of the GPU, and it can do it from other sites that use flash, but not from HBOgo. That's a second problem, even when flash video plays well, it's still not using hardware acceleration, but first I want to know why HBOgo's flash player is so much worse than everyone else's player.
Here is the specific issue: I navigate to HBOgo.com, pick any video to play and begin playback. Playback usually begins at a relatively low resolution (I'd guess 480 or so based on its obvious pixelation), and then steps up the resolution gradually. Usually after a minute or so, it will have reached its best resolution and that's when it starts dropping frames like crazy and pinning the CPU at 100%. The video looks terribly choppy and the audio skips the more choppy the video is. When I click pause or hit the spacebar for a pause, it will take two or three seconds as it spits out the last few video frames before finally showing the paused icon on the last frame. Those two seconds seem to corrolate with CPU processing since there is no noticable delay when pausing video anywhere else under any other conditions. Of course, CPU useage will drop back to 5 or 10 while the video is paused.
Right-clicking the screen lets me choose "Show Video Debug" which in turn tells me:
     StageVideo enabled in OSMF: Yes
     StageVideo is supported.
     StageVideo is not being used, regular video 'probably' is.
This is where I got the information about dropped frames. If it matters, when paused, the buffer will fill to about 400 Mb plus or minus about 10 percent of that, perhaps. Also, during playback, the buffer maintains approximately the same amount, indicating that my ISP has no problem sending that much data to my device. The buffer seems fill to a lenght of time, about 60 seconds; so, as the video resolution goes down, the total buffer drops accordingly... sometimes it is at 200 Mb for 60 seconds with lower resolution, etc...
Speaking of my ISP, I have Verizon FiOS (I don't know why it would matter, but I'm in King of Prussia, which is near Philadelphia, PA). I just tested my bandwidth and it tells me that my IP is 71.175.97.244 and my download rate is 57.98 Mbps from some server in Matawan, NJ. I don't think networking issues factor into this at all. I say that because, digging into the developer tools (all 3 browsers show the same network activity: Firefox, Chrome, and IE) and clicking on the "Network" column, it consistently shows low latency for all the stream components. For example:
     path: http://hds.pro12.lv3.hbogo.com/videos/PRO12/e2/hbo/feature/728425/hbo_821867_PRO12_f4m/hbo _821867_PRO12_8-Seg1-Frag858
     method: get
     type: video/f4f
Timing Tab show:
     Sending: 0     Waiting: 89mg     Recieving: 159ms
This seems to indicate that I'm getting the data sent to me without any problem, so forget about network issues, right?
Also, regarding information available in Developer Tools, I can see that the flash video object has the paramater "wmode" set to "transparent". I already wasted time messing with this before I realized that the paramater is irrelavent while in fullscreen mode -- besides the fact that even when it is changed to direct or gpu when not in full screen, it does nothing to help matters. I think this was covered in one of the last discussions talking about lack of hardware acceleration on HBOgo -- the same discussion that ended with a few people saying that they were going to "throw in to towel".
What am I missing here? Why is StageVideo supported but not used? Why do other players which use flash play videos with better quality despite still not using hardware acceleration?
Windows Vista = updated
NVIDIA Video Drivers = updated
Flash Player = updated
Flash Addons (pepper flash, etc...) = updated
Firefox, Chrome, IE = all updated
There's got to be something I can do. What is it?

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

Special characters are not being displayed normally after recent update.

FF messed up with that recent update. Special characters are now not being displayed properly - they somehow stretch the whole line where they are posted. It was fine before
I.E.:
http://www.discogs.com/artist/%E2%84%91%E2%8A%87%E2%89%A5%E2%97%8A%E2%89%A4%E2%8A%86%E2%84%9C
ℑ⊇≥◊≤⊆ℜ
Here you can see what I mean (Opera & FF screenshots), Opera has no problems with them, see highlighted:
http://img525.imageshack.us/img525/3897/image16m.jpg
Thanks

Which version were you using before?
Some font issues may be caused by graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You can disable it, but you might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Does that make any difference?

Sections of report not being displayed on some systems

Post Author: jlutz
CA Forum: General
Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application. The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed. For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks!

Post Author: PeterLiebich
CA Forum: General
I have issues in ReportDesigner when I have my hardware acceleration set at maximum try reducing it. Goto
ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Ipod touch not being recognized by itunes now

i have a friend who has an ipod touch....everything had been going fine for him and then all of a sudden it was not being recognized any more....what caused this? he did say that he had done an update but i'm not sure what version he has....could this possibly be the problem.....does anyone an a fix for this?

I think Apple is having a problem at the moment, my Ipod touch was always fine syncing until the new update! (Even on older itunes version, I could'nt sync since new update came out) It just isnt recognizing the device...
Ive done all that Apple says to do, none of which helps at all, I reckon its thier own side of the problem they need to fix...

IPod touch not being recognized by iTunes on my MacBook, and on 2 other PCs

Hello,
After scouring the web and these discussion forums to no avail, I've decided to post my problem. I downloaded iTunes 8.0 yesterday, and updated the firmware on my iPod Touch to 1.1.5. I tried connecting my iPod, and nothing happened. It is not being recognized by my MacBook. So, I tried using another USB iPod connector, and nothing happened. I tried using a firewire connector, and nothing happened. Frustrated, I tried connecting to my one roommate's HP laptop and see if it would get recognized there - no. I then tried on my other roommate's laptop. The device was recognized to be USB, but iTunes wouldn't go ahead and try and reformat it. I'm starting to lose my mind! I've tried resetting the iPod touch itself loads of times to no success. I've tried restarting while having the iPod connected to the computer, and still nothing.
What should I do now?

Sorry about not getting to you on the quick-fast, but we aren't Apple employees.
What ended up being the solution you needed, as you said, you couldn't find any information already posted on this problem, so documenting your fix may help someone in the future.

IPod not being recognized by iTunes or Windows XP

I just got a ipod nano for my birthday and I've been trying to set it up for two days, I've got the latest version of Itunes and I've tried everything I could think of and my Ipod is still not being detected by my computer or iTunes. When I plug it into my usb port, it starts to charge but nothing else happens, can someone please help me?

To resolve this issue i unistalled Itunes and quicktime, then looked for diffrent USB ports once found I put iPod nano in and re-installed Itunes and quicktime

Why isn't my iPod 6th generation not being recognized by iTunes?

Why isn't my iPod 6th generation not being recognized by iTunes?

Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

TS3716 ipod nano is not being recognized by iTunes.

My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
Any suggestions?

Does the iPod work OK?
Have you tied resetting the iPod? Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Next would be to place the iPod in recovery mode and then restore via iTunes. If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Ipod not being noticed

My ipod is pluggin but and is charging when plugged in to the computer butis not being recognized in my computer and in itunes. therefor i cant update it . Help me please

You PC is not the only thing which is myopic... Try going through the steps outlined here:
http://docs.info.apple.com/article.html?artnum=61711
Post again if it works out or if not say what you've already tried and the results obtained.

DFSR or DFS-R not being accelerated on WAAS

Similar Messages

Maybe you are looking for