DFSR replication stopped between sites after all servers updated (Event 1202)

Hello,
I'm afraid, i will greatly appreciate any help on this one.
I'm working on it since 2 days without success (I read many thread without help).
So the fact:
I have 2 AD (2008 R2) on site 1 and 2 AD (2008 R2) on site 2.
I have also 2 files servers (2008) on site 1 and 2 files servers (2008 R2) on site 2.
The files servers run DFS system.
DFS Namespace is host on all AD.
DFS Replication and share are on all files servers.
After update all my servers. I got a big problem.
Communication between files servers and AD of site 2 isn't working properly now.
By this fact, DFSR is not working anymore between site 1 (all seem fine on this site) and site 2.
DFSR on site 2, pop this events all time:
Event 1202 - Source DFSR
The DFS Replication service failed to contact domain controller  to access configuration information. Replication is stopped. The service will try again during the next configuration polling cycle, which will occur in 60 minutes. This event can be caused
by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Event 1055 - Source GroupPolicy
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
>dfsrdiag dumpadcfg
Operation Failed
>dfsrdiag pollad
Operation Failed
On ADs site 2, dcdiag /e don't reveal any issue.
I tried to install hotfix ref on this thread (without help) -> https://social.technet.microsoft.com/Forums/en-US/7d486eb5-6b03-471c-a4dc-65826e712fc3/dfsr-replication-event-id-1202-the-dfs-replication-service-failed-to-contact-domain-controller?forum=winserverfiles
I don't have issue with DNS (nslookup work fine).
Firewall are disable on all servers.
My problem looks a bit like here (but he don't speak about 2008 R2 - old article) -> blogs.technet.com/b/askds/archive/2011/04/08/restrictions-for-unauthenticated-rpc-clients-the-group-policy-that-punches-your-domain-in-the-face.asp
Any help will be greatly appreciate.
Fabien

Hi Fabien,
Do you use the ping command to check basic network connectivity? Please refer to the article below to clear bad information in Active Directory-integrated DNS:
How to clear bad information in Active Directory-integrated DNS
http://support.microsoft.com/kb/305967
You could also refer to the threads below to troubleshoot the issue:
DFSR failed to contact domain controller
https://social.technet.microsoft.com/Forums/windowsserver/en-US/eae32fb9-3234-402a-be8b-2ab9555fd25d/dfsr-failed-to-contact-domain-controller?forum=winserverfiles
GPO not replicating and GPO's during today not always applying
https://social.technet.microsoft.com/Forums/windowsserver/en-US/ff885ae8-497f-48c1-b30b-efea95016334/gpo-not-replicating-and-gpos-during-today-not-always-applying?forum=winserverGP
Best Regards,
Mandy 
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

    I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

    Look in the HD/Applications folder.

  • HT201493 Find my friends stopped working right after recent iOS update, anyone have a fix?

    Find my friends stopped working right after recent iOS update,  anyone know of a fix for this?

    Appreciate that, but it's not as useful now.  Many users have the same issue, also see
    https://discussions.apple.com/message/23105624#23105624

  • After all the updates (itunes 10.6, iphone 5.1, and iphoto) all my photos are suddenly being synced with my iPhone.

    After all the updates (itunes 10.6, iphone 5.1, and iphoto) all my photos are suddenly being synced with my iphone. Before I was able to pick the "last 12 months" or last import, or certain album. Now everything is greyed out?

    After deleting files, there does not seem much improvement on the disk space.
    Felicia,
    Download Omni Disk Sweeper: it is free now and will list your files and folders sorted by size.
    But don't get carried away and sweep and delete anything that you do not know what is is required for:
    http://www.omnigroup.com/products/omnidisksweeper/download/
    I recovered from time machines's backup harddisk
    Time Machine may be using the disk space - if you have Time Machine enabled and not the backup drive connected, TM will make local snapshots, if you have free disk space. See Pondini's webpage for more information: Time Machine - Questions 30. What are Local Snapshots?
    I disable these local snapshots on my portable macs, to be sure, how much space really is free.
    Regards
    Léonie

  • Problem on ASP site after OS X update

    I'm the webmaster on an ASP website and I'm using OS X 10.6.7.  After the Security update 2011-002, if I go to the adminstrator's area on that website and try to enter data it's like the keyboard isn't connected.  I can boot to older images of my hard disk or to a computer I have that is running Tiger, or to an old Windows laptop I have, and everything works fine.  It appears that somehow this update activated some feature that says I have too many characters in one particular area of the administrator's section of the website.  From my reading there is no way to remove the update.  I've tried all the major browsers and they all are the same.  It is only with my updated computer than I can't enter data into that one segment of the website.  Any ideas or suggestions on how to track this down?  Thanks.

    ... And I've run this site for several years without a glitch, so it certainly isn't the case that ASP doesn't ever work fine with OS X, because it has flawlessly until this recent update....
    I've maintained ASP/IIS, SQL, Sharepoint and Exchange (OWA) servers for many years (over 10, since the late 90s.  Okay, Sharepoint might be less than 10 years old. ) and I have tried using various versions of Netscape, Opera, Firefox, Safari and now recently Chrome, to manage these Microsoft based servers.  None worked flawlessly.  Some browsers worked better for the "basic features", but I always had to have IE running somewhere.  The "simpler" your ASP code, the more likely it would work, but overall, I'd say you've just been lucky.  Or rather, your luck may have just run out.
    If you're going to continue to use ASP, then I recommend you either have your Mac run Windows in Boot Camp/Parallels/Fusion, or use RDP to remote connect to one of the Windows servers so that you can run IE off of the server to access the management web pages that don't work from your Mac.  I RDP to one of my Windows workstations as the primary method of managing the Windows servers when not at my desk.  And it can be done from a Mac, PC, iPad or my Windows Mobile smartphone.  (The workstation is also configured with other tools to make managing the servers easier, but that's another topic.)

  • Difficulty with some sites after last Security update..

    anyone else had any problems?
    I've found that with my bank, and a couple of other sites like myspace, Safari keeps instantly coming up with 'server cannot be found' error, without even trying to access the sites. Sometimes shift-click/return does the trick (after 10 hits!) or I end up having to reset Safari, and it'll work for a couple of visits. And even then, once I've managed to get into the site, clicking links is a chance in itself, that I don't get the same error.
    My mac at work was fine (didn't do the last Security update), and all this only started after the last update..
    GAAAH!!!!

    Terrible Problem, and I'm certain attributable to the latest Security Update. I have tried EVERYTHING, including deep system cache clearning, combined update, permission repairs, Purging ALL plugins from Safari, DNS cache reset... you name it. I am an EE, Mac User for 20 years, computer/Unix savvy, and am completely stumped, having tried EVERY trick in book short of the Windows Style "Reformat and Reload the Hard Disk." I can't log into gmail, or this site for that matter (using an old laptop presently). The problem occurs with the following common denominators: ASP page, Screen Name/Password dialog box, and then either a return to blank dialog page, or an endless string of redirects. THIS AFFECTS EVERY BROWSER I TRY, INCLUDING THE LATEST FIREFOX. Needless to say, this problem is driving me NUTS, and of course I can't get any help directly from Apple, since my laptop is over a year old. I doubt I would find tech help sophisticated enough anyway. Does ANYBODY have any suggestions? This is one of these maddening problems that can consume entire evenings. I wish I had never installed the latest security update.
    AL PB G4   Mac OS X (10.4.8)   1.5GB Ram

  • Execution does not end even after all records updated..

    Hi,
    I have plsql code like :
    declare
    begin
    for x in ( select .......) loop -- about 4000 times
    for y in ( select ............) loop -- about 50 times
    end loop;
    -- some code goes here to manipulate clob data
    -- like creating free temp clobs - use - then free them
    -- Update statement that update some table using clob values.
    insert into tablex values(sysdate);
    commit;
    end loop;
    end;
    Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
    select count(1) from tablex;
    After 50 mins i can see that all records are updated but...
    plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
    I can not understand why this it is not ending execution..
    What could be the problem ...

    Hi,
    Here it is.....
    declare
    v_text_data TableA.text_data%type;
    v_clob clob;
    type dummyclob_t is table of clob index by binary_integer;
    dummyclob dummyclob_t;
    v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
    begin
    select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
    for x in (select object_id
    from TableA
    where object_type = 'STDTEXT' ) loop
    dbms_lob.createtemporary(v_text_data,TRUE);
    for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
    from TableB
    where object_id = x.object_id) loop
    v_text_data := v_text_data ||
    case
    when trunc(dbms_random.value(0,7)) = 0
    then chr(10)
    else v_str
    end ||
    y.temp_data;
    end loop;
    select text_data into v_clob from TableA where object_id = x.object_id for update;
    if v_text_data is not null then
    dbms_lob.append(v_clob,v_text_data);
    end if;
    dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
    dbms_lob.freetemporary(v_text_data);
    insert into xyz values (sysdate);
    commit;
    end loop;
    end;
    Thanks for your time..:)
    Rushang.

  • Exchange replication service not starting after installing Rollup update 3 v3

    Hi,
    I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
    of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
    Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
    Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
    at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Bind(EndPoint localEP)
    at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
    Event ID 4999:
    Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
    ErrorReportingEnabled: True
    Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
    The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
    Event ID 2060:
    The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
    Check the event logs to determine the cause.
    Thanks
    in Advance!!

    I hope you are following the best practice to install rollup on DAG. 
    Suspend activation for the databases on the server being updated.
    Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
    Install the update rollup.
    Resume activation for the databases on the updated server.
    Perform database switchovers as needed.
    http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
    Thanks Uday Kiran,
    Senior Consultant
    Cyquent Technology Consultants, Dubai
    Please Mark as answer if it helps you

  • Why has my apple tv stopped home sharing after the recent update

    My whole network was fine until I updated my ATV last week. After this update the homesharing 'library' stops being visible from my pc after 3 minutes. Ive disabled the wireless and used Ethernet instead but with the same results. I have a BT home hub 3 and have reset the router but with no joy .... Please help !

    Try power cycling the ATV.
    If the issue persists, try providing some more details of the issue such as what video, all, specific apps, etc.

  • Flash Player stops playing games after most recent update.

    My father uses the website PCHGAMES.COM, daily.  He loves to play bingo.  Earlier this week Flash Player updates itself and now PCHGAMES.COM, bingo will not play.  It would let you chose which room to go to, and play the movie before the game, but when it gets to loading the room and chose the bingo cards all you get is a RED X.  After coming over to see what the issue was, and following all solutions on Flash Player games, video, or audio don't work | Windows page... The only solution that works is #7. Disable Flash Player hardware acceleration.  Once I followed these instructions, the bingo game played fine as long as he did not leave that page or window.  If he got bored and went to play another game and then came back to bingo it would not work again.  Then I would have to come back over and do #7. Disable Flash Player hardware acceleration, except this time it would be checking the box and Enable Flash Player hardware acceleration.  My father is disabled and doesn't understand why all of a sudden bingo will not work when it has been fine for 3 years.
    Currently his computer is using Windows Vista (32-bit), using IE Version 9.0.8112.16421, with Flash Player Version 11.1.102.63
    Is there any way to fix this other than having to come back to Adobe's site and enable or disable this checkbox every time he wants to play bingo?

    LW327, this is an issue that really annoys me! Laptop manufacturers produce their own 'custom' drivers that are actually, in most cases, exactly the same as generic drivers, except often years out of date! If there are actually any differences, then it's a few hooks into manufacturer installed programs, so installing a generic driver may, in the worst case, only cut down on some functionality with associated OEM supplied software.
    There are 2 ways around your problem to install the newest Intel driver:-
    1) Download the newest driver from Intel. Uninstall your current driver, reboot, and manually install the Intel one.
    2) Download the zip version of the Intel driver. Unzip it to a directory, then update your driver by picking the location where you unpacked the archive. This allows any checks that may scupper an install over the top of a custom driver to be avoided.
    Once you have the latest Intel driver installed, you'll get updates via Microsoft Update. There again, I just checked the Intel website and the latest G31/33 driver is dated May 2009, so installing it probably wont make any difference to your predicament. There again, the real issue here is that flash is messed up!

  • I cannot view my site in browser or publish my site after 2014.3 update

    Hi,
    I updated to 2014.3 and cannot view my site in browser or publish. I see that alot of other people are having issues. Can you please assist. This is very frustrating.
    I am using OS X Yosemite 10.10.2.
    Thank you
    Brett

    Hi Sanjit,
    I cannot even publish the site. Muse crashes when I try to view site in browser and it crashes when I try to publish the site. It is not the browsers - yes I have tried. It has only happened since I updated to 2014.3 - just like everyone else having problems. This is a problem with the update. I can make a new site in the new release and it works - however all existing sites built before 2014.3 release is no good. This a big problem that needs sorting out. I should not have to rebuild everything again. I have sent my muse file via dropbox, as I have seen other people having trouble being asked to send the file through and it will be looked at. The url is http://australiasnaturecoast.businesscatalyst.com/ . This is not the correct version as I made a new site in the new muse update. I need my original version to work. I have tried uninstall and reinstall of Muse and this has not helped.
    Thanks

  • 1280x720 mp4 videos stop playing video after 9.1 update, only sound works

    After upgrading to 9.1, 1280x720 mp4 videos won't play video anymore, only sound. Any help?

    I am having a similar problem with videos. After an update, some of my video files play and others do not. They are all in mpeg-4 video format so I don't know that is the difference except the videos that are not playing are larger files of movies. The shorter videos play fine. Any ideas? My quicktime is up to date and I'm using iTunes 9.1. Before updates I was able to view the videos without a problem.
    I am guessing that because of the size of the videos...mine are 640x352 that does not play but 480x320 will play

  • Outlook in Office 2007 stopped receiving email after April 2014 update installed

    After installing the Office 2007 updates for April 2014 yesterday, I stopped receiving email.   Email is still going to our server (where I can read it), but is not being delivered to my Outlook account.
    Anyone else with this problem?  Solutions?
    Thanks.

    Try u-installing Office and re-installing.
    Office 2011 Removal
    Office 2011 Removal (2)

  • Whats going with itunes store ? after all this updates. win 7 64 bit store does not upload completly and very slow, no nav bar.

    I re-installed itunes and by this i mean part by part itunes, quicktime and so on. Once I re-installed it looked like all was going well. I went to the store and upload like it use to before the upadtes. Than I pluged my Ipad2 no problem but I went to store once more the problem started agian the up-load  was very slow it didn't up load completly. the nav bar on the store page is missing no apps, music, books,tabs are all gone. I think it has to do  with the new itunes upates in the last few days. I also did the firewall and anti virus off step no fix and i'm running Norton 2011. Has itunes put any message on this ? Is it only window 7 64bit with the problem ? Oh one more thing I was getting a 3259 error but that looks like is good now, but it did take me a few days to download one book and one app the download is very slow.

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • Freeze problem in user interface initiatilisation after all NVDIA update and 8.0.1

    I just received Pre 8 and installed it
    When starting the various modules
    - Organiser works more or less fine (it crash when it looks at my folders with 28000 pictures), but it works when doing import folder by folder
    - but when I am starting a new project
    I never get to the user interface of the software
    I get a small red dot and when clicking problem with your driver
    I have already looked at the forum
    updated at NVidia site
    I am running a
    Dell Inspiron 1720
    Windows 7 , 64 bits, French
    4 GB RAM
    NVIDIA 8600 M GT
    latest NVIDIA driver from July 2010 (version 258.96)
    Installed PrE 8 French from the DVD
    upgraded to 8.0.1 from the Adobe website
    I can not use any of the software function as the screen is fully black and I only see the top level menus
    theoptions are availalbe but non of them is working
    and the message atbottowlefttays at user interface initialisation
    Thanks

    I've never set Portuguese, so I really don't know what to tell you. It would be my presumption, though, that this sort of feature would be handled in the World-Ready Composers, but clearly there is either a bug or I'm mistaken, or both.
    I would suggest you file a bug report at Adobe - Feature Request/Bug Report Form, though I doubt there will be a fix.

Maybe you are looking for