Dhcp error getState serveradmin_dhcp plug-in module

Hi!
I have a 10.8.2 server serving netinstall images DHCP and SUS. Suddenly it stopped serving IP addresses, and after checking in Server.app I got an error "An error occurred on the server while processing a command. The error occurred while processing a command of type 'getState' in plug-in 'servermgr_dhcp'.
I ga see in the log for the DHCP service that its in fact recieveing ACKS from devices but i cannot view connected clients och see the status of the DHCP service in Server.app, version 2.1.1 to be clear...
It also seems like the netinstall service is having difficulties serving clients.
No change was made to the server, but there war a pending update, the small update to 10.8.2 ver 1.0 interim update. I applied it, but nothing changed. Still same problem as before. As an attempt to fix this I removed the /var/bootpd.plist and let the service recreate it. it populated with old data?!? Where did that come from?
I then proceeded to deleting Server.app and emptying the trash, rebooted and reinstalled Server.app from App Store. config showed successful, and then the same error in Aerver.app. what is the cause of this, and more importantly, what is the fix? can I somehow reset the DHCP service? And where are all files associated with the service so I can delete them and have them recreated?

I had same problem with:
the error occurred while processing a command of type "getState" in plugin 'servermgr_dhcp'
and serverapp crash.
In terminal running:
sudo serveradmin status dhcp
It did said it was running, stopped the dhcp service in terminal
sudo serveradmin stop dhcp
Went to folder
/var/db/
did a copy to my desktop of file: dhcpd_leases
then deleted the file from /var/db/dhcpd_leases
Start Dhcp service in terminal:
sudo serveradmin start dhcp
Everythings seems to work

Similar Messages

Load plug-in module(plug_dial)

Suddenly, this message is appearing on my screen:
Load plug-in module(Plug_Dial) failed('AutoMatchAPN')
I cannot find a solution.

Hi, did you fix this error? or how did you fixed?
Thanks

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error message when plugging in ipod

I have two ipods, ipod touch 2nd gen and ipod nano 6th gen. both get the same error message when plugged into itunes that says that it detects the ipod but cannot connect to it because there is an ID error. I've gone through all the steps to ID the ipod, even reformatted the ipod nano and still am not getting anywhere. I've followed some of the steps from some of the other community questions with no results. If someone knows any other suggestions I'm open. It worked fine until the recent iTunes update. Is it their way of forcing you to get the newer products?

Hi erinstab,
Thanks for visiting Apple Support Communities.
I'd recommend starting with these steps if your iPod nano is not recognized correctly by iTunes or your PC:
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
Another article describes what to do if you are using Windows and see an unknown error containing "0xE" when connecting your device.
You can find these steps here:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
You may also find the steps in these articles helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Regards,
Jeremy

Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.

Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.
intially i created view object named EmpByEmail.........for that EmpByEmail1 is created in datacontrols....i deleted EmpByEmail in demo.model by mistake and i created again with same name EmpBYEmail another view object...again another EmpByEmail2 is created in datacontrols.....
while i am running i am getting following error:::::::
Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.

Hi,
Please seasrch for the EmpByEmail1 file in ur project and remove all the details in the Page Def and UI and then try again.
Due to the EmpByEmail1 existance in page Def this may occur . It may help , still if it was not working then I am sorry for that.

Error with internet plug-in message and blocked plugin

On my MacBook Air Im receiving a error with internet plug-in message and blocked plugin which will not allow video clips to play i.e. YouTube. How do I correct this?

When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

An error occurred in the privileges module... appleshare IP share disk

Machine:
G4 Mini Tower (Graphite)
Mac OS 9.2
AppleShare IP 6.3
This machine whilst dated has been hosting our files for years without issue.
The files we share across the network are on a FireWire disk. We had to replace the disk with a newer version, of exactly the same size (250gb) but if the machine is rebooted, the FILE SERVER blinks indefinately and no volumes are shared.
If the machine is booted without the FireWire volume mounted, the FILE SERVER starts within a matter of seconds. I can then mount the Firewire volume fine. When I lanch Privileges and navigate to the FireWire volume and select Choose, I get the error:
An error occurred in the Privileges module in entry point "RACMMenu Item Selected". A programmer error has occurred. -50
I have read an article in the knowledge base - but this only refers to using OS9 in Classic mode. I can confirm that we are not using OSX just OS9.2 and AppleShare IP 6.3
Any suggestions would be welcomed!
Thanks

When File Sharing starts up on a "regular" Mac OS 9 system that does not generally have File Sharing turned on, the disk being shared chugs away for several minutes building the invisible file with the privileges in it before finally acknowledging that File Sharing is ON.
One possibility is that you may not be waiting long enough. (Long enough may be overnight on a really big Volume with a FireWire interface.)
-50 paramErr Error in user parameter list
so I expect it is what it says -- the programmer made an error in a procedure call and you are the first one to find it.

PUB01015 Error - Location Locked - While Deploying modules in parallel

Hi
I wrote a TCL script to deploy the OWB Objects to environments.
I am calling the script 30 times for deploying 30 modules in a batch file in parallel.
(I am using the 'start' dos command to start them in parallel.)
I am getting the following error for some of the modules.
====
Failed to Connect to the OWB Repository and start Control Center .. : PUB01015:
Object EDSDEV12_STAGE_LOCATION is already locked by OS user 'sai.durga' using ma
chine 'CRPDB002'!
====
The number of modules being locked each time I try is not consistent.
Sometimes only 2 will be success full and sometimes 17 will be successfull and the rest will give the above error.
Is there any setting where this is being defined that only a particular number of objects can be deployed ?
Or is there an API (?) using which I can unlock them and try ?
Or is it related to commit ? I am calling the commit at the end of the script for each module.
Appreciate any help on this.
Thanks and Regards
Sameer

use OMBSAVE and OMBCOMMIT frequently in the TCL script.
During the process of deployment
is any one doing some other activity like "debug"
on the same location ?
According to my experience it comes when some user is using Degug and at the same time some other user is
trying to deploy some mapping on the same location.
Edited by: Nawneet on Mar 20, 2009 12:24 AM

Does SJSC support NetBeans Plug-In Modules?

Can't seem to find any specific information regarding this question. I'm interested in creating a plug-in module for NetBeans and I'm curious if Sun Studio products support the NetBeans plug-in modules.
Can anyone point me to information?
Thanks,
-Greg

Hi,
This is what one of our engineer had to say regarding Netbeans Plug-In Modules
Although it is based on NetBeans, Creator does not officially support the addition of 3rd party modules, at least not yet. That said, there is nothing in Creator that prevents a user from writing and installing such a module. How well it performs depends on what the module does and how it interacts with the rest of the IDE.
Thanks,
RK.

HT1481 I get a DEC Error when I plug my iPod into the auxiliary on my radio on my motorcycle

I get a DEC Error when I plug my niPod into the auxiliary on my radio on my motorcycle

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Link error: Failed to open external module

Newbie question #2... I'm in chapter 5 of the tutorial, just added the button to calculate min and max values of the sinewave. I get two link errors when I try to run the program.
2 Project link errors:
Failed to open external module
Failed to open external module
If I comment out the MaxMin1D function and fudge the min and max values the program runs.
Any ideas?
The function I added is as follows which appears to be identical to the sample in the tutorial.
int CVICALLBACK FindMaxMin (int panel, int control, int event,
       void *callbackData, int eventData1, int eventData2)
   ssize_t min_index;
   double min;
   ssize_t max_index;
   double max;
//   max = 5;
//   min = 3;
   switch (event)
       case EVENT_COMMIT:
           MaxMin1D(sine, 100, &max, &max_index, &min, &min_index);
           SetCtrlVal(panelHandle, PANEL_MAX, max);
           SetCtrlVal(panelHandle, PANEL_MIN, min);
           break;
       case EVENT_RIGHT_CLICK:
           break;
   return 0;

I searched for analysis.h, found it and copied it to the same folder as sample1.c and the program now links and runs.
I'm wondering if I'm missing something in the configuration (not smart enough to know where to search)???
Thanks

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Error ::OraOLEDBpus10.dll: The specified module could not be found.

hello all,
i have Oracle 9i installed in my system;
Without deinstalling Oracle 9i , i have installed Orale 10 G ...
while opening my application(it is in vC++), i got the following error:
OraOLEDBpus10.dll: The specified module could not be found.
pls advise...

thanks for your prompt response...
i haven't restarted my machine...
whether it is mandate to restart....
anyway... in the path variable...Oracle 10 G installation path preceeds the Oracle 9i... i believe it is sufficient to make the system to look into Oracle 10 G location...
Am i right???

O/S-Error: (OS 126) The specified module could not be found.

i get this error in my vb6.0 application...
"O/S-Error: (OS 126) The specified module could not be found.
ROW-00054: Cannot load the library"
Assuming my connection is fine...
DB is oracle 9.2.0.4 patch installed,MDAC 2.8,VB6.0
My code snipped goes like this...
conn.Open "Provider=OraOledb.Oracle;User ID=test;Password=test;DATA SOURCE=oracle.world;UseSession Format=1"
objADOCommand.CommandText = "select * from wfmuser"
objADOCommand.ActiveConnection = conn
adorec.CursorLocation = adUseClient
objADOCommand.Properties("IRowsetChange") = True
objADOCommand.Properties("Updatability") = 7 ' Insert, Delete and Update
Set adorec = objADOCommand.Execute
it gives me the error upon execution of above line.
i have reinstalled the OLEDB provider,as well as MDAC.
but of no help...
i have even cheked my OS path for oraHome entry.
please respond ASAP...i am stuck.

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

CGEN-03003 error when generating a menu module

When I generate a menu module in Designer 2.1,
I get the following error.
Please help me !
Greetings Rob
CGEN-03613 ERROR: Did not generate the module.
CGEN-01086 WARNING: Module: Attached library 'REWARD.pll' not found in forms search path. Using full path name.
CGEN-03003 ERROR: Module: Failed to create .mmx file for menu module MENU
Generation of Module 'M_HOOFDMENU' Unsuccessful

We have the same problem, and the problem was in the xsd import:
The wdsl import a schema that import other schema, the second import use a relative path, that was wrong.
So check the xsd import sequence....

Dhcp error getState serveradmin_dhcp plug-in module

Similar Messages

Maybe you are looking for