DIAdem cross classification of data (lambda and temperature)?

Hi,
I'm looking for a way to cross classify data in DIAdem. I have two rows of data, Temperature and Lambda, which I would like to cross classify in given temperature and lambda bins. IE how often (frequency) is the temperature between 400-410 degrees at the same time as lambda is between 0.91-0.92 .. and so on for all possible combinations.
My english is a bit rusty so I think an example of how the data looks and how I would solve it in Excel looks:
Indata:
lambda Temp
0,920 850
1,000 700
1,000 810
1,100 840
1,000 840
0,980 890
0,970 890
1,000 790
0,950 800
0,400 950
0,400 790
0,700 800
1,020 800
intervals:
lambda temperature
0,9   800
0,95 810
1      820
1,05   830
1,1 840
1,15 850
1,2
Result:
In each cell in the matrix I use the SUMPRODUCT for the conditions, ex. lambda <0,9 and 820<T<=830. Also note that I want the values outside the boundaries to be counted in the lowest/highest values.

Hello, and thanks for your answer. I've looked a bit at the Compound Classification function, but haven't been able to get the results I'd like, but I suspect that is down to myself more than the program,. :-) (I am a beginner at DIAdem)
This is the result I'd expect given the listed indata and using the following intervals (see image):
http://img139.imageshack.us/my.php?image=crossclassificationsl2.png
(taken from my Excel calculations - I tried pasting the excel table directly but the forum complained that my message exceeded 10000 characters then.. ?!)
However, I think I'm chosing my intervals incorrectly in DIAdem/Compound Classification, so if anyone could use my indata and reproduce the excel results using DIAdem I'd be very happy to know how.. as it'd show me how to think.
On a related issue, is there any way to use a list of values as input for intervals as in some cases I'd like the intervals to vary and be smaller around the most interesting point. For example lambda:
(<0.7)
0.7
0.8
0.9
0.91
0.92
0.93
1.08
1.09
1.1
1.2
(>1.3)
Thanks in advance,
ArtVandelay

Similar Messages

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Having difficulty reading data file and doing analysis, maybe DIAdem can help

Hello,
I am new to DIAdem but I think it may be helpful to my application.
I used Write Labview Measurement File VI with n-signals input to generate a data file containing 2*n columns(time column and data column iteratively). Now I need to do data analysis from the file. I'd tried to use Read Labview Measurement File VI to load the data but didn't work. I found that it can only read file with one signal as input and without file header. But why?
What I want to do is to extract specific columns from the file. Some column has special flag values which divide the column into sections. I also need to extract these sections from the column and plot each of them. I know this can be easily done on other data analysis software but is there any way I can do it on Labview? Can DIAdem help with this?
Thank you

Hello,
To answer your last question first, DIAdem can certainly help. You can open the TDM file you created with the Write LabVIEW Measurement File VI with DIAdem. If you navigate to the TDM file in the External Data window of DIAdem NAVIGATOR, you can drag and drop the file into the Data Portal and use the channels of data at will.
You can also right-click on the file in the External Data window and choose Selective Opening…. There is a Help button in the Selective Opening window which will tell you more about using this feature.
Either way, once your data is in the Data Portal, you can use the DIAdem ANALYSIS to perform a wide range of analysis on your data. For more on the capabilities of DIAdem, I recommend starting at NI DIAdem.
Now, in regards to using the LabVIEW to access the data in your TDM file, this is also possible. If you are using LabVIEW 7.1, you will want to look at the Read Channel Groups example. This example uses a sequence of VIs from the Functions>>All Functions>>FileI/O>>Storage palette. The example demonstrates reading multiple channels from a TDM file.
Regards,
Eric M

Get cell value in Planning Data form and using it in a business rule

Hi Everybody,
if i set the data type of an Account Member as text, is there a way to get the value inserted by the user in a dataform, turning it as dimensional member and using it in a business rule?
So, if the user insert the value "USA" in a cell, can i use any functions to tell essbase that "USA" is a dimensional member and then using it in a business rule, for example in a cross-dimension like Period1->FY12->USA?
I tried to use the function @Member and it doesn't work, but i'm wondering if there is a way that can let me get the value inserted and use it just like a dimensional member. What are the ways that can let user input value that can be used in a business rule? I think one is by using SmartList, is there any other ways? Maybe using variables?? As an alternative i tried to use Prompt Variable but there are too many members on which the rule must run.
Please help me, i wanna know if i can or not let the user input the member on which the rule must run...
Thank all guys
Bye
Maurizio

Thanks EW for your answer,
YesI could use SmartList even if i think it's very tough to handle. My experience on using SmartList in caclc script is not so good. I try to enter in details of my requirement:
I have 500 account members.
For each one, I have to calculate the monthly budget by sharing the amount among the months. The user wants to calculate it on the basis of the actual flow(over the months) of an unspecified account of the prior year. The unspecified account must be inserted in a data form.
So, i could use a Smart List but it colud be of 500 elements and then i should make a rule with as many IF as how many are the accounts. Or im wrong? The only way to use smart list dynamically in a business rule is by referring its values in a IF condition. Or i'm wrong.
I tried to use execution variable ma it seems don't work. In this case the user must pay attention to write the account correctly, otherwise as you say the rule doesn't work.
The value in PD0A020 is "PD0A000" (that is a dimensional member). The value in PD0A000 is "hello". In PD0A040 the rule returns "PD0A000" and not "hello" as i would. The function @Member appears to be not able to catch the dimensional member by the value in PD0A000.
{Example}="test"->"Input"->"Scenario_test"->"FY12"->"PD0A020";
Fix("test1","Input","Scenario_test","FY12")
"PD0A040"=@Member({Example});
endfix
So, my doubt is: is it possible for Essbase/Planning to use the value inserted in a data form and to turn it in a dimensional member? What are the practicable ways to let the user input/choose the member on which makes the rule run?
Thank you Ew, thank you guys
Maurizio

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

Mexico Roaming Data Charges and MiFi Hotspot Wireless

Hi,
I've been a Verizon customer for many years. I've used their PC Card and the unlimited data plan for my computer. I often travel near the border, Detroit, MI ... Niagara Falls, NY ... Laredo, TX ... Del Rio, TX ... El Paso, TX ... Nogales, AZ ... Calexico, CA ... San Diego, CA ... often. In the VZAccess Manager, the software used by the computer to connect, I have roaming disabled. Recently I upgraded to the MiFi and love the ability to have my laptop and my wife's connected at the same time. Recently near the Mexico border, the first time since having the MiFi, I checked my online Verizon usage and didn't see any mention of Mexico. There's nothing in any user manual about how to disable roaming specific to the MiFi, so I took that to mean that since the VZAccess Manager's settings controlled the MiFi while connected via USB, the settings also applied while wireless. They don't. I have since logged into the MiFi itself the way you would any WiFi router and there are no settings for roaming. I called Customer Service. They said there is no way to disable roaming when using it as a wireless hotspot ... and for me to "remember" to connect to just one computer with the USB cable. I intend to do that, but some people do forget ... traveling in an RV through El Paso ... just driving through ... you're close to the border. Be sure and remember to change your habits and stop using the MiFi as a wireless hotspot. I have charges for roaming in Mexico when I did not go to Mexico ... and did not know I was roaming.
My billing cycle isn't for two more days. They couldn't assure me today that all charges would be reversed ... not until the billing cycle. I would certainly hope they reverse all charges ... even if in the hundreds ... and they ought to have better safeguards rather than charge you for roaming in Mexico when you're not in Mexico. There should be a pop-up, a warning, something a user has to do to authorize the connection ... when you're not even in Mexico, but instead you are in a US city with a strong Verizon signal. If it already has a good US signal, why would it switch to a roaming signal anyway, even if that roaming signal is slightly stronger? Why roam if a strong "home" signal is available anyway?
I haven't been told that all my charges will be reversed ..., but at least I can alert you, if you use the MiFi as a HotSpot, it could switch to roaming even if you have a strong "home" signal and even if you have not crossed the US border. There is no way to stop this when using it as a HotSpot ... and you are not alerted at all unless you notice the light ... and have been told that a solid blue means roaming ... and you "remember" to check. I never noticed the blue light ... can only assume since the manual says so, that the light was blue at some point. But I never noticed it. I know now that light should be checked ... and I know now that the USB connection should be used anytime close to the border. I know that now. But people do forget. There should be some safeguard. VZAccess Manager has the ability to disable roaming and then you don't need to remember. The MiFi should should also have that ability. And actually, they shouldn't allow roaming when a home signal is available ... and even if you have roaming enabled and you cross a border, there should be a pop-up, flag, or alert of some kind where the user has to authorize the connection.
Hope this helps someone avoid this. And I hope they reverse all the charges ... even if in the hundreds.
Thank you,
Tony McCanless

Yep, I've been charged for it. They still claim that with roaming turned off, apps will bypass this and use data anyway.
"Some data applications and data functions including email updates will
still work in the background even if the iPhone data roaming is switched
off but not in direct physical use by you and this data roaming usage
would appear as it is working on the device without any warning.
The device could be using data that you don't necessarily know is being
used, for example, embedded rich content in emails can generate
significant volumes of data both ways. The email application is a likely
source of most of that data usage."
So it would seem that the "data roaming off" facility is a bit misleading, as it's not actually turning data roaming off. Apparently.
Thanks for the info Meg.

WHY SUCH AN INJUSTICE THAT BBM CANNOT BE USED ON MY CURVE 9300 OVER NORMAL DATA SERVICE AND OTHER PLATFORMS CAN USE!

Hello,
I am using Blackberry Curve 9300. I purchased this phone for Rs. 17,250 before some 3 years, I considered RIM to be a Company providing premium services which is unique in itself and which worth spending on them and the most important thing is those are not available to non-blackberry users! Especially in case of Blackberry Messenger, which is such a service connecting all the blackberry users around the world, making a mark of precious symbol of the users of BBM.
Before few days I came to know about BBM being available on Android and Windows phones, my question is why this injustice with your own customers, you provide the app which they will use with their normal data plan and we people who are your real customers, who trusted in you have to spend not less than Rs.129 for just BBM!I must say RIM is the most back-stabbing company I have had ever dealt with! People are laughing at us as they are using the same service for almost free and we have to spend a huge sum for availing the same service, my question is are these non blackberry people your customers or we people who contributed in your success with hopes of trust?
My question is not why you made available BBM usage to non-blackberry users with such flexibility but my question is why can't you be loyal to your own customers?
I hope that RIM would have a pleasing justification.

Thanks with the signature but I already removed it from my profile too.
I was never under a rock when it comes to technology I know that in India before few months yoru Blackberry Z10 was Rs.44,000 and now it is Rs.21,000. I understand the ploy of making BBM cross platform to generate revenue, first in a technical sense and another by creating it advrtisement in the marker.
Do you think that taking an undue advantage of our loyaty and enduring the mockery of your own customer would take you anywhere? Don't you think that abusing your own customer's prestige would even affect you negatively? While your customer is paying Rs.129 for just BBM the Android person sitting next to him is lauging at him for he paid you and call him fool! Profits doesn't starts only by making huge business decisions but from the loyal and satisfied customers. You may always find customers all around always complaining but deep down if you have touched their needs they will bless you with good words at your back, maybe in such a way that you will never come to kow but it will grow you more. I am not here to deliver you a marketing lecture as i am in corporate law field but let me tell you what I read during my graduation, it said something like one disatisfied customer can discourage ten potential customers from buying your product and I have started feeling the same in case of online shopping but I do not know when the company giant blackberry would come to know!
When you said about expanding customer base, think about a company who is expanding its base of customers by disatisfing their current customers who always took pride in you by providing them services at harsh terms and in front of their eyes others are getting benefits at a very low cost.
Our family business is textile manufacturing, not as big as blackberry but we always knew that if we will start selling our goods by describing them as really premium goods and start charging out of lips and bounds, of course my product could be premium worth the price but one thing I could be missing would be a point of finance, there could be cheaper alternatives in market which could be selling at lower price which same usage. My concern is just to keep our eyes open.
Now consider a phone on which I can use Whatsapp which satisfies my messaging needs, gtalk and yahoo messengers for my im needs, push mails for emails, browsing and downloading for just Rs.99 and on the other hand Blackberry services for Rs.389, it is indeed clear the reason of downfall, though it is labelled as premium service and indeed it could be, permium service as I said earlier.
When you feel that your boat is sinking, you do not have only have to pull out the waters but on the priority basis you have to cover the hole too! Blackberry is just pulling out the water leaving the hole as it is!
If you say that legacy mode in BBOS could bother you from providing BBM for BB device, you know that it cannot be and even I know that, any technical person can know that as it is a little secret that I can use BB browser without BIS and many other apps are example of the same (to be a bit informal). See, I never asked this thing from last three years but now when you are making it cross platform why not to give a little benefits to those who paid you till now, if you can give it to those who are nothign to you?
My question is that why can't you provide BBM to be used on the normal data paln for your own old and loyal customers who paid you such a handsome amount from many years for your services as how you provide on other platform, just for BBM not email and rest of your services?

Creating a time channel in the data portal and filling it with data - Is there a more efficient way than this?

I currently have a requirement to create a time channel in the data portal and subsequently fill it with data. I've shown below how I am currently doing it:
Time_Ch = ChnAlloc("Time channel", 271214 , 1 , , "Time" ,1 ,1) 'Allocate time channel
For intLoop = 1 to 271214
ChD(intLoop,Time_Ch(0)) = CurrDateTimeReal 'Create time value
Next
I understand that the function to create and allocate memory for the time channel is extremely quick. However the time to store data in the channel afterwards is going to be highly dependent on the length I have assigned to the Time_Ch. In my application the length of Time_Ch is variable but could easily be in the order of 271214 or higher. Under such circumstances the time taken to fill Time_Ch is quite considerable. I am wondering whether this is the most appropriate way of doing things or whether there is a more efficient way of creating a time channel and filling it.
Thanks very much for any help.
Regards
Matthew

Hi Matthew,
You are correct that there is a more efficient way to do this. I'm a little confused about your "CurrDateTimeReal" assignment-- is this a constant? Most people want a Time channel that counts up linearly in seconds or fractions of a second over the duration of the measurement. But that looks like you would assign the same time value to all the rows of the new Time channel.
If you want to create a "normal" Time channel that increases at a constant rate, you can use the ChnGenTime() function:
ReturnValue = ChnGenTime(TimeChannel, GenTimeUnit, GenTimeXBeg, GenTimeXEnd, GenTimeStep, GenTimeMode, GenTimeNo)
If you really do want a Time channel filled with all the same values, you can use the ChnLinGen() function and simply set the GenXBegin and GenXEnd parameters to be the same value:
ReturnValue = ChnLinGen(TimeChannel, GenXBegin, GenXEnd, XNo, [GenXUnitPreset])
In both cases you can use the Time channel you've already created (which as you say executes quickly) and point the output of these functions to that Time channel by using the Group/Channel syntax of the Time channel you created for the first TimeChannel parameter in either of the above functions.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to use the (gigabit) ethernet for data exchange and WLAN for Internet?

I have following setup:
- MB Pro SL 10.6
- Desktop PC Windows 7
- Wireless Printer
- Netgear WLAN Router
At the moment all my data and internet communication is done via the WLAN router on 192.168.1.x That works fine and I can exchange data, print and surf the internet. My problem is that big data exchanges > 10GB take ages via my 54Mbit WLAN Connection. Furthermore the WLAN router is far away from the PC so that it is not possible to plug in the Ethernet Cable of the PC and the MB to the router.
Now I've thought that there must be a possibility to use a 1 gigabit (cross) cable (like in the 90s ;)) to connect the MB and the PC directly. I know that I will need different IP ranges and so on, but I have no clue how to do that.
The final solution should be that the setup stays as it is (data exchange, print, internet via WLAN) and that additional it is possible to connect PC and MAC some times for big transfers via a Gigabit ethernet cable. because I only want to connect those two machines I don't think that a switch makes any sense, or?
Does someone know how to do that?
Thanks a lot in advance!
Message was edited by: whitepowder

Well if it were 2 Macs, I would configure each Mac with a fixed IP address (same subnet as my router, but outside of the routers DHCP assignment range).
I would give the same fixed IP address to both my Airport AND my ethernet interfaces. I would do the same to the other Mac using another fixed IP address.
My network service order would have the ethernet higher than the Airport on both systems.
Normally I would use WiFi, so ethernet would be idle and out of the loop.
When I wanted faster transfers, I would connect each Mac to the router via their own ethernet cables, and the Mac would automatically detect that the ethernet became available, and would switch to use the faster ethernet. Since Airport and ethernet have the same fixed IP address, I could even do this in the middle of a file transfer and no one would notice as packets were always going to/from the same IP addresses, just using a different route, which doesn't matter.
NOTE: I've been doing this on Macs since Mac OS X 10.3 days (or was it 10.2; to long ago to remember).
However, you have thrown a Windows system into the mix, and since I do not use Windows, I do not have a clue about what can be done on Windows. However, maybe this will give you some ideas, and asking the right questions in a Windows oriented forum may provide the Windows side of this setup.
Sorry, that is the best I can do. Maybe my reply will encourage someone else to offer their approach.

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I have data caps and need to do a clean mavericks install

Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?

The_Cowman wrote:
Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?
Most Apple Stores are pretty good. Or a friend with a large download limit. Just make sure that where ever you go to download it that you use your OWN Apple ID. Then copy it to the USB Stick, copy it to your Application folder and reinstall. (Note that the installer removes itself after installation, so keep that copy either on the USB stick or copy to an external drive, etc.)
Pete

Data Federator data lineage and impact analysis

Hi,
I am looking for the use of data lineage and impact analysis feature in data federator at Universe level.
Can I know which objects are using which fields by uisng impact feature in the data federator.
Thanks in Advance.

I realize this answer is a cop out but I'll suggest it anyway. Upgrade.
I struggled with getting the lineage and impact analysis working in 10.1 and had to do quite a bit of trial and error in the Apache configuration files, DAD's ,etc. because the lineage reports were web based. I never got them working in Production due to other much more pressing implementation issues at the time and never went back to fix them.
In 10.2 and above the reports are much easier to get with no real configuration needed.
Anyway, back to your question, I would suggest going back through the 10.1 documentation on getting those to work and have someone a bit familiar with setting up Apache help you. I did get them working in our Test environment but its been so long I can't recall all the steps and tricks, sorry.
-gary

Diff b/w Data warehouse and Business Warehouse

Hi all,
what is the Diff b/w Data warehouse and Business Warehouse?

hi..
The diferrence between Datawarehousing and Business Warehouse are as follows.
DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
Refer this
Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
hope it helps...

Data fileds and key fields in DSO

Can any one explain what exactly difference between data fileds and keyfields in DSO or the concept of these two
And how to know which fields should be assigned to data filed or key field
with regards,
musai

Hi Musai,
Let me take an ex. Say you have 3 fields A, B & C. Let us assume 'A' is keyfield, 'B' & 'C' are Datafields.
Lets assume the PSA data is :
A             B              C
001      Musai        89.9
002      Musai        89.9
003      Pavan       75.00
So when you load the data to DSO, since all the keyfield values are unique (001,002,003), all the records will get loaded to DSO.
But If PSA data is :
A             B              C
001      Musai        89.9
001      Musai        85.7
003      Pavan       75.00
Only 2nd & 3rd rows will be loaded to DSO since 1st & 2nd row have same value for keyfield (001). So 1st row gets overwritten(or summation depending on what is the setting in Transformation rule for C considering C is Keyfigure) by 2nd when you load to DSO. 3rd row doesn't have any problem. So that will go as it is.
Also please note that we cannot use Keyfigures as keyfield.
Hope it is clear now!
Regards,
Pavan

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

DIAdem cross classification of data (lambda and temperature)?

Similar Messages

Maybe you are looking for