Diamond dash problem

I Downloaded it on my iPad my mother instantly wanted a go so I said go ahead, she linked it to her facebook and now it won't unlink from hers to mine, tried resseting app data tried redownloading, etc... and either way the app has binded to her acount and now I have nothing toi play because it is on her acount.

You can only update an iPad 2 to iOS 6.0.1 (that is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change.
To update, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Similar Messages

  • TS1702 Can't purchase gold bars from diamond dash.. Says complete transaction through iTunes support??

    I'm trying to purchase a in app for gold blocks from the game "diamond dash" it keeps saying "contact iTunes support to compleat transaction" it's driving me nuts! I can purchase coins but not gold??
    Worked last night but no good today.. Help me please.. I'm hooked!!

    Sorry, we could have no way of knowing what the problem would be. You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    Regards.

  • HT2693 l cannot sign in my iphone on diamond dash

    l cannot sign in the diamond dash in my iphone is happen one week already so how to do?? can u settle my problem as soon as possible

    You can manage your information at appleid.apple.com! And if you go to the "find out" option, this will allow iTunes store to send a verification email to you if you haven't already received one as that may be why your having sucha hassle! That same site will also allow you to change passwords etc, I would suggest writing it down as the password is case sensitive!
    Hopefully i was of help Enjoy!
    Cheers!

  • After downloading candy crush my new iPod will not open or play also diamond dash plays really slow

    AFter downloading Candy Crush on my new iPod it will not open or play, also diamond dash plays real slow. I have no other games downloaded

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • When i buy , in game ( diamond dash) , (bable witch) ... App stor say , please contact itunes support to conplete this transaction

    When i buy , in game ( diamond dash) , (bable witch) ... App stor say , please contact itunes support to conplete this transaction

    You can contact iTunes support by going to this page, selecting iTunes > iTunes Store and sending them the details. Just so you know, the people on these forums are just other Apple product users like yourself, Apple does not generally answer questions here.
    Best of luck getting things straightened out.

  • TS1702 I updated diamond dash on my iPad and now it will not let me play the game has anyone got any ideas on what to do please

    I updated diamond dash on my I pad and now it will not let me play it any ideas ?

    You need to put your passcode in. This is a security feature.
    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212
    Forgot Passcode use recovery mode to restore
    http://support.apple.com/kb/HT1808

  • Cfmail dash problems

    Does coldfusion 7 support having an email address with a dash
    in it. ie
    [email protected]
    I am getting this error in the log.
    Invalid Addresses; nested exception is: class
    javax.mail.SendFailedException: 501 5.5.4 Invalid Address
    This is proving to be a big problem as dealing with many
    users who have email addresses in this format.
    Is there any workaround - ie converting email address to
    ascii ??
    Any help would be much appreciated.
    Cheers

    FYI...our organization has a dash (-) in the domain name and
    have no problems sending email via cfmail.
    We're running CFMX7.0.2
    Good luck

  • Dash (-) problems in to param of cfmail tag

    Does coldfusion 7 support having an email address with a dash
    in it. ie
    [email protected]
    I am getting this error in the log.
    Invalid Addresses; nested exception is: class
    javax.mail.SendFailedException: 501 5.5.4 Invalid Address
    This is proving to be a big problem as dealing with many
    users who have email addresses in this format.
    Is there any workaround - ie converting email address to
    ascii ??
    Any help would be much appreciated.
    Cheers

    just put actual string
    http://mysite/usermailregistrationpage?code=ADGBDGDFGAXAFADFDA
    in the mail body, without surrounding it with <a> or
    anything.
    if your cfmail type is plain (default) it will be shown as
    text, while
    more recent email application may automatically show it as
    link
    (Thunderbird does).
    Azadi Saryev
    Sabai-dee.com
    http://www.sabai-dee.com/

  • Blinking dash problem on Macbook 2008 unibody after installation Windows 7

    Hello everybody,
    I installed Windows 7 (professional x86) with bootcamp (3.0.1), installation good, but when I want to boot on Windows 7, I have a blinking dash and I can't do anything.
    I have a macbook 2008 unibody, last version of mac osx.
    Before I had windows XP and I don't had any problem.
    Need help plz.
    Any suggestions ?
    Regards.

    I need help!! T-T

  • [875P Neo Series] P4N Diamond - RAID problem

    Hi,
    I just purchased a P4N Diamond. I've installed WinXP-SP2 on a single Samsung 70GB IDE disk on IDE1 as Primary Master. Two CD/DVD drives are on IDE2.
    SATA-1 and SATA-2 are connected to Hitachi 500GB SATA drives.
    I've entered the nVidea RAID utility in Bios by pressing F10 during boot, and established the two SATA drives as a mirrored volume.
    After reboot the RAID volume is detected and appear as sync'ed during reboot.
    Now comws the problems: I am utterly unable to set these two drives up as a mirrored volume under WindowsXP-SP2:
    When I enter Control Panel -> Administrative Tools -> Computer Management -> Storage -> Disk management, both disks appear as separate disks and Unallocated.  When I Right Click to create a new volume, I don't the option of creating a Mirrored volume.
    Even stranger thing happens if I now exit everything and reboot: The nVidea RAID utility in BIOS has now been reset to two separate drives.
    Question is: What do I do wrong, and how do I get these two 500GB drives set up as one mirrored RAID volume?
    Regards,
    Robert H

    read the raid manual ?
    https://forum-en.msi.com/index.php?topic=84043.0

  • [nVidia Series] P4N Diamond raid problem

    i have a P4N diamond motherboard with a 3 ghz cpu on. I have setted up a raid 5 with 4 drives on the nvidia raid controller. on the sillicon raid controller i want to have to have 2 sata disks striped. In the sillicon bios for the raid i have configured those 2 drives for raid0 and i get 1 logical drive which i also can see from the bios. My problem is then that when i boot up the computer and begin the installation of windows xp ( and give it the sillicon driver with the F6 button ) then i get 2 logical disks on the sillicon controller instead of my striped raid0 drive.
    What do i do wrong? everything looks right for me in the bios. Raid is enabled and the serial ata ports are enabled. Help please
    - Jesper H

    problem fixed by using the right silicon driver. the orginal diskette driver can not be used. you need to make a diskette with the raid version of the silicon driver.

  • P6N Diamond New Problem: Second HDD Randomly Starts/Stops Since recent Update

    Howdy All,
    Continuing problems with the P5N Diamond.
    This one's new.
    Previously I had the same problem as many others with the cold boot issue. Somehow, someway, it just stopped: cold boot or not, one day it just started booting fine....go figure.
    However, I recently (about 3 weeks ago) did the MSI live update that included something or other pertaining to the E-SATA....support for it or something to that end. Although I don't use the E-SATA, I installed it thinking I might at some point and since installing it, I have discovered a new problem: my second drives (in RAID 0) just opens/closes randomly. It seems to mostly occur when operating demanding programs: gaming, watching a video, that sort of thing.
    Everytime it does this, it takes me to desktop and asks me what program I want to use to open the program......which when I do, is nothing more than my second (D drive) HDDs in RAID 0. I then get the yellow pop up message in the bottom toolbar from Windows saying it's experienced a write failure problem. It hasn't done any damage that I can tell and I've lost nothing, but being taken to desktop perpetually is a major issue. This problem is driving me absolutely up the wall. No sooner than I start to do something and wham.....I'm at desktop being asked what program I want to use to open up the second HDDs. I've also tried just leaving it open but to no avail: it just randomly continues to open and close.
    I have my O/S on the C drive and 2 more HDDs in RAID O for back up on ports 6 & 7. Since doing the MSI update that included the E-SATA whatever, this new problem almost prevents the computer from being usable: certainly nothing in gaming is possible along with anything that requires uninterruption.
    Here's my system:
    M/B: P6N Diamond
    CPU: E6850
    RAM: Corsair XMS PC-8500, 2 x 1 gig
    HDD: 1- WD 150 Raptor
    HDD: 2- WD 5000AAKS in Raid 0
    Vid Card: EVGA 8800GTX
    PSU: PC Power & Cooling 750 Silencer
    ODD: Sony DRU 830A
    FDD: Sony Floppy
    Misc: Scythe fans x 5
    O/S: XP Pro w/ SP2
    Running BIOS 1.2
    So, being fairly certain the MSI update created the problem, my question is, how do I undo the MSI's most recent update to remove it? When I go into Add/Remove Programs, nothing is listed there. I'm not sure this is the source of the problem but I do know I didn't have it beforehand.
    I'd greatly appreciate any help with this....even any ideas. While I have some computer knowledge, I'm not as tech savvy as most here, but this problem is, apart from driving me up a wall, making the computer almost unusable. FYI, I haven't done a System Restore because I've installed several things since and don't want to lose them if I can isolate the problem, but I will if that's what you all recommend.
    Again, sorry for what may be a noobish question, but I'm not sure where else to go. After dealing with MSI's tech support, I'd rather talk to a wall.
    Thanks greatly.
    Pepper1

    Mark,
    Forgive me for asking, but I am a bit confused. Is your "cold boot issue" now solved? If so, do you think that the new drives are the key?
    Lev
    Quote from: MarkJohnson on 17-December-07, 14:21:23
    Sorry for late post.
    After setting up the HW RAID (2500YS) for booting the system still cold boots.  strangely this time the reset (Ctrl+Alt+Del) doesn't seem to work.  I must of did it two dozen times and it would never clear.  I then just powered off after the other 2 drives on the nvidia SATA cleared and seen the HD LED light up and stay on for a few seconds(seems stuck on the 4723 checks of the drive) and then powered down and powered right back up with no cold boot issue.  It has worked this way every time for the last week or so and I tested it like 20 or so times(3-4 times a day).  These drives are listed as being compatible after the firmware update (and I did that already) so I guess it is either the MB BIOS needs updating or it's the way the nvidia chipset runs this setup is wacky.  This is assuming the 4723 HD compatibility list is correct.
    here's a summary of the drives so far.
    36GB Raptors (old revision) - can take forever to boot properly and corrupted my disk in 3 days of testing (scrambled my directory structure)
    105GB Raptors - Just reset(Ctrl+Alt+Del) 1-4 times after the HD LED goes solid for a few seconds.  worked for two months no errors.
    250GB Caviar RE(2500YS) - have to power off (power button) when HD LED goes solid.  so far no problems for a week.
    80 GB SATA II Hitachi Deskstar (HDS728080PLA380 - May 2005) - same as 150 GB Raptors, just a reset or four, only did a days worth of testing with no errors.
    well, I was hoping for those 2500YS to work properly.  Now it makes it really hard to track the problems with so many different errors and 3 different places it can go wrong 4723/nvidia/msi/HD Manufacturer.  wait, that's 4.  Oh boy!
    Hopefully this gets resolved soon.  I've already had to move this MB to my secondary system, and for other reasons than this.  I didn't mind hitting the reset button to get this to run.  I get the feeling that MSI has abandoned this board on us.  with the new P7N being released it will be even harder to get anyone to mess with this thing.
    -=Mark=-

  • MSI K9N DIAMOND boot problems

    Hi.
    I have given the main PC sig below to my son. And I now have / building
    MSI K9N DIAMOND AM2 nvidia nForce 590 SLI 8channel audio DDR2 ATX
    Corsair 1GB DDR2-6400 128Mx64 non-ECC 240 DIMM unbuffered 5-5-5-12
    AMD 2x 5600 cpu
    I have kept the PSU, wifi card.
    (will update when up and running.)
    When I put his harddrive (SATA) into his new PC it saw it straight away and booted into xp,without having to reinstall . Great.
    I put my drive into the new AM2 board and I get three beeps (I read that's the USBs)
    Then it either just hangs on a black screen or if i enable raid it tries then the BSOD  code 0x0000007E which i believe is just a standard error message.
    The D-bracket has 4 green lights...
    does anyone know why I cant just boot up my drive like i could with my sons, is it because i'm switching to AM2 from 939?
    When I enter the raid setup (F10) it can see the drive but next to where it says bootable drive  which is normally a yes or a no it has N/A and I cannot change it.
    I belive it is a raid/ driver problem I'm thinking its the AM2 upgrade.
    I did not get any floppy raid drivers with my mo/bo.
    If I reinstalled Xp would I need to install raid drivers during setup? (F6)
    I have clears cmos
    Many thanks for any help.

    hello
    I plugged my sons drive into my K9N Diamond and it is saying the same thing in the raid setup   (F10) .....When you have the option to set as the bootable drive
    Quote "set as boot drive N/A"
    It can see the drive OK, I can delete array and rebuild it
    Is there something in the bios that I need to tick or untick/ enable for it to boot from the drive?
    any help would be great. 
    thanks

  • P45 Diamond Post Problem

    Hi,
    I'm starting to have another post problem with my P45 Diamond motherboard.  (First one was RMA'd).  This time, it's showing "Processor Initilization" with red, green, green, red.  My current system is
    Motherboard - MSI P45 Diamond
    Bios - 1.3
    Processor - Intel Q6600 (older version)
    Memory - Kingston KVR1333D3N9K2/4G 4gb total 1333
    Power Supply - Silverstone 750 watt
    Graphics - ATI Radeon HD 3870 X2
    It's been working fine for a few weeks and just started acting up.  I'm using stock settings (no overclock) .
    Recent changes are adding the Genie, however the post problem happened for the first time before I plugged in the Genie.  The same result now occurs when the Genie is plugged in and when I remove it from the motherboard power. 
    Basically what happens is it will power up for the first time and it works.  If I restart or shutdown and turn it back on the monitor stays blank and the status lights show Red, Green, Green, Red which is Processor Initilization.  Only way to get it to boot up is hitting the Clear CMOS button or, when I went to bed and started it up this morning, it booted fine.
    Any suggestions would be greatly appreciated. 

    Quote
    The MCH voltage in Core Center we being reported at 1.976 however I NEVER changed any of the values.  Is it possible that the bios "AUTO" changed the value?
    The question is this value is really set to 1.976V or if it just a misreport.  Please start Green Power Center and check the voltage values there.
    {Remove Dual Core Center from the AUTOSTART list to make sure it does not open automatically when Windows is loaded.  You can start Green Power Center independently of DCC.  Just have look at the Dual Core Center Installation folder.  There should be a sub-folder that contains the GPC Application.  Create a shortcut to it from the Desktop and you are ready to go.}

  • NX8600GTS Diamond HDMI problem

    My monitor is LG L245WP, which supports HDMI input.
    I wanted to use HDMI connection between my desktop and monitor, so I have changed MSI NX8600GTS Diamond. This VGA card recieves SPDIF sound input and HDMI output.
    However, after setting up, the screen has been wired. In case of 1920x1200 resolution, about 20% of right side does not appear and black blanks appear on both side. Please look at the attacked photo. The sound and DVI(1920x1200) works well. I have no idea what makes this. I tryed many dirvers like 162.xx and 158.xx forceware, two kinds of OS- Vista and XP, but they got the same result.
    One strange thing is that it works well with Vista standard driver. But in this case, the sound doesn't work.
    I guess this is a kind of timing problem of Nvidia forceware, but I cannot find out the exact reason and solution.

    try to define & adjust custom resolution with Rivatuner:
    http://downloads.guru3d.com/download.php?det=163

Maybe you are looking for

  • Iphone no longer syncing with Outlook

    I have been syncing my Iphone5 to Outlook directly via USB with my PC laptop since the first iphone came out (2006?).  Over the years, this process has survived numerous operating system upgrades, hardware upgrades etc. As of yesterday, it is not syn

  • My changes to an external hard drive's files and folders vanished.

    Something crazy happened with a Mac-formatted external hard drive I've been working with. Today, out of nowhere, it reverted to a state where tons of organizational work I have done on the folder contents vanished. Files I deleted were restored, file

  • Function module in ECC 6.0

    Hi Experts ,       I have an issue in using Function module  in ECC 6.0 , while passing data in table parameter is showing an error as ' Table parameter is obselete'. Can u please suggest any other way of passing   table in function module. <removed_

  • Uninstalling Reporting Services 2005 instance

    Hi, I'm trying to uninstall an old instance of SQL 2005 Reporting Services (x86) on a WS2008 vm but for some reason the uninstall crashes. I am using programs and features to uninstall the SQL 2005 Reporting Services named instance. I get a message s

  • Configuration to trigger the EDI IDOC when posting

    Hi all, Can I know what is the configuration needed in order to trigger the EDI message type INVOIC IDOC when posting to certain company code (eg: AP10)? As I know for order acknowlegment need to do some configuration in Tcode v v13 in order to trigg