Cfmail dash problems

Does coldfusion 7 support having an email address with a dash
in it. ie
[email protected]
I am getting this error in the log.
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 501 5.5.4 Invalid Address
This is proving to be a big problem as dealing with many
users who have email addresses in this format.
Is there any workaround - ie converting email address to
ascii ??
Any help would be much appreciated.
Cheers

FYI...our organization has a dash (-) in the domain name and
have no problems sending email via cfmail.
We're running CFMX7.0.2
Good luck

Similar Messages

Dash (-) problems in to param of cfmail tag

Does coldfusion 7 support having an email address with a dash
in it. ie
[email protected]
I am getting this error in the log.
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 501 5.5.4 Invalid Address
This is proving to be a big problem as dealing with many
users who have email addresses in this format.
Is there any workaround - ie converting email address to
ascii ??
Any help would be much appreciated.
Cheers

just put actual string
http://mysite/usermailregistrationpage?code=ADGBDGDFGAXAFADFDA
in the mail body, without surrounding it with <a> or
anything.
if your cfmail type is plain (default) it will be shown as
text, while
more recent email application may automatically show it as
link
(Thunderbird does).
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Blinking dash problem on Macbook 2008 unibody after installation Windows 7

Hello everybody,
I installed Windows 7 (professional x86) with bootcamp (3.0.1), installation good, but when I want to boot on Windows 7, I have a blinking dash and I can't do anything.
I have a macbook 2008 unibody, last version of mac osx.
Before I had windows XP and I don't had any problem.
Need help plz.
Any suggestions ?
Regards.

I need help!! T-T

Quotes and dashes problem

Hi,
The following statement returns me an error :
BEGIN
EXECUTE IMMEDIATE 'INSERT INTO TEXTEST2 (kwd) VALUES (''Test ''''quotes'''' and -dashes--'')';
END;
Here is the error : ORA-01401: inserted value too large for column
ORA-06512: at line 2
Have you a solution ?
Cheers,
Phil

try to post the table structure for your table TEXTEST2. most probably your column size or width is small. to fix try to increase the size of the column.

Cfmail - wraptext problems

I usually only do a wraptext in the cfmailpart for the text
version of my emails, but recently put it in my cmail call because
I had complaints that lines were too long for people who received
it on a blackberry (which was set to take HTML). Now it's inserting
a %0A in random places (like between a two letters in an image
call, i.e. e%0Amail_logo2.jpg and basically messing up the HTML
versions. Is there a way around this? Thanks in advance! Using CFMX
6.1 on Windows

This is normal.
CfLib.org has smarter wrap functions.

Diamond dash problem

I Downloaded it on my iPad my mother instantly wanted a go so I said go ahead, she linked it to her facebook and now it won't unlink from hers to mine, tried resseting app data tried redownloading, etc... and either way the app has binded to her acount and now I have nothing toi play because it is on her acount.

You can only update an iPad 2 to iOS 6.0.1 (that is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change.
To update, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Em Dashes Revisited

When I first upgraded to RH7, I noticed that all the em
dashes in the projects I converted from RH2002 to RH7 displayed as
&emdash; in my compiled help.
The updates seem to have fixed that problem when
converting/upgrading projects, but em dash support is still
horribly (and frustratingly broken) for em dashes that I add when
writing new content in RoboHelp 7.
To add an em dash, I hold ALT and press 0151 on my numeric
keypad. It's quick, and it works in every other application I've
ever used. In fact, RoboHelp 7 makes me think it'll work in RH7,
too, because the em dash displays correctly in the Design pane.
However, when I run my compiled help, I see the dreaded
&emdash; instead of my em dash.
Yes, I could go to Insert > HTML > Symbol and then
choose Em Dash, but that's incredibly clunky. I could also do a
universal find/replace to replace &emdash; with <symbol
name="Em Dash"><robohelp>—</robohelp>
before I ship a help file, but that seems silly.
If RoboHelp needs <symbol name="Em
Dash"><robohelp>—</robohelp> why can't it
just add that tag set when I hit ALT+0151?
Frustrated,
-kmcanney
P.S. I know we were all glad to see Kadov tags go away, but
how are these <robohelp> tags any better?

Thanks for checking in, Peter.
It's definitely not the font. I used every available font on
my system, and I was still seeing &emdash;.
Interestingly enough, we have another RH installation that
doesn't exhibit the em dash problem (nor the problem I noted in
another post that prevented me from typing a numeric value in the
Font Size combo box).
The combination led me to suspect that my installation might
be corrupt, so I uninstalled RH7 using Control Panel > Programs
and Features. After uninstalling, running the RH installer prompted
me to repair or remove my installation, and I saw that all the
installation files had been left behind. I let RoboHelp do the
uninstallation this time, reinstalled, and then applied the 7.0.1
and 7.0.2 patches. The problem persisted.
I uninstalled again, deleted left-behind files again,
reinstalled and went straight to the 7.0.2 patch. The problem
persisted.
We shared my coworker's program folder across the network,
and I ran Beyond Compare on the two installation folders. Since we
both had 7.0.2, I expected to see most files in sync. Not so. Many
of the files in my C:\Program Files\Adobe\Adobe RoboHelp 7 folder
were from 9/2007. It seems that the updater hadn't updated many of
my files (including many DLLs in the C:\Program Files\Adobe\Adobe
RoboHelp 7\RoboHTML folder).
Using brute force, I updated my installation with the files
from my coworker's, and all is now shiny and happy.
Seems that something's quirky in the install/update behavior.
We'll have to see what happens if/when a 7.0.3 patch is released.
Thanks,
-Kevin

Cfmailpart type="text" errors

I cam trying to send an email message with the use of the
cfmail tag like so:
<cfmail from = "myemail" To = "myemail" Subject =
"mysubject">
<cfmailpart type="text" wraptext="72">
Plain text content (roughly 2 ms word pages)
</cfmailpart>
<cfmailpart type="html">
My HTML equivalent to the above content.
</cfmailpart>
</cfmail>
My problem is the the content within the text version breaks
at various point so different lines instead of the expected wrap at
line 72. Some lines are only going about 20 characters or so and
very inconsistent. Also, when testing the mail to an outside
account such as hotmail, yahoo etc.. the mail is not getting
delivered.
Anyone else encounter anything similar.

W (87) e (101) l (108) c (99) o (111) m (109) e (101) (32) t
(116) o (111) (32) t (116) h (104) e (101) (32) V (86) i (105) m
(109) y (121) (32) e (101) - (45) n (110) e (101) w (119) s (115) l
(108) e (101) t (116) t (116) e (101) r (114) ! (33) (32) T (84) h
(104) e (101) (32) g (103) o (111) a (97) l (108) (32) o (111) f
(102) (32) t (116) h (104) i (105) s (115) (32) n (110) e (101) w
(119) s (115) l (108) e (101) t (116) t (116) e (101) r (114) (32)
i (105) s (115) (32) t (116) o (111) (32) k (107) e (101) e (101) p
(112) (32) y (121) o (111) u (117) (32) u (117) p (112) - (45) t
(116) o (111) - (45) d (100) a (97) t (116) e (101) (32) o (111) n
(110) (32) t (116) h (104) e (101) (32) 9 (57) 0 (48) t (116) h
(104) (32) a (97) n (110) n (110) i (105) v (118) e (101) r (114) s
(115) a (97) r (114) y (121) (32) o (111) f (102) (32) t (116) h
(104) e (101) (32) B (66) a (97) t (116) t (116) l (108) e (101)
(32) o (111) f (102) (32) V (86) i (105) m (109) y (121) (32) R
(82) i (105) d (100) g (103) e (101) (32) a (97) n (110) d (100)
(32) d (100) e (101) d (100) i (105) c (99) a (97) t (116) i (105)
o (111) n (110) (32) o (111) f (102) (32) t (116) h (104) e (101)
(32) r (114) e (101) s (115) t (116) o (111) r (114) e (101) d
(100) (32) C (67) a (97) n (110) a (97) d (100) i (105) a (97) n
(110) (32) N (78) a (97) t (116) i (105) o (111) n (110) a (97) l
(108) (32) V (86) i (105) m (109) y (121) (32) M (77) e (101) m
(109) o (111) r (114) i (105) a (97) l (108) . (46) (32) E (69) v
(118) e (101) r (114) y (121) (32) s (115) e (101) c (99) o (111) n
(110) d (100) (32) M (77) o (111) n (110) d (100) a (97) y (121) ,
(44) (32) y (121) o (111) u (117) (32) c (99) a (97) n (110) (32) e
(101) x (120) p (112) e (101) c (99) t (116) (32) a (97) n (110)
(32) u (117) p (112) d (100) a (97) t (116) e (101) , (44) (32) l
(108) i (105) k (107) e (101) (32) t (116) h (104) i (105) s (115)
(32) o (111) n (110) e (101) , (44) (32) w (119) i (105) t (116) h
(104) (32) u (117) s (115) e (101) f (102) u (117) l (108) (32) t
(116) i (105) p (112) s (115) (32) a (97) n (110) d (100) (32) i
(105) m (109) p (112) o (111) r (114) t (116) a (97) n (110) t
(116) (32) d (100) e (101) t (116) a (97) i (105) l (108) s (115)
(32) a (97) b (98) o (111) u (117) t (116) (32) t (116) h (104) e
(101) (32) e (101) v (118) e (101) n (110) t (116) s (115) (32) h
(104) a (97) p (112) p (112) e (101) n (110) i (105) n (110) g
(103) (32) i (105) n (110) (32) F (70) r (114) a (97) n (110) c
(99) e (101) (32) a (97) n (110) d (100) (32) C (67) a (97) n (110)
a (97) d (100) a (97) (32) t (116) o (111)

Problem with '-' (dash) in BEx web analyzer

Hi All,
we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as "1234\-5467" in the selection screen.
If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
Has anyone had this type of issue? Please respond.
Thanks
Niveda

Thanks Olivier,
Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
Let me explain it with an example.
Scenario:
Let say company defines material in the following format.
"123", "456", "788", "345"....etc.
And I have a report which has material as input selection.
To run this report with single material i enter "123" in the selection screen
To run this report with a range of materials, I need to enter 123 - 456 in the selection.
I have no Issues
Scenario 2.
Consider a case if the materials are defined in SAP as "001-1234", "987-234"
"123-234" etc.
In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
Is this 1 single material(001-1234) or a material range (001 - 1234)??
We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
Any help??
Niveda

Problem with dashed line spacing when printing to pdf

Hi all,
this may be a problem with my pdf program (I use bluebeam), but maybe someone will have an idea how to fix it whether in indesign or bluebeam.
so I made a dashed line using the stroke command in indesign. I need to have the spacing set to 3pt dash and 2pt space. I also need to keep the lineweight to 0.5...this all works fine and appears correctly in indesign when I preview
the problem is that some of the dashed lines, but not all of them, change size and spacing in the pdf when I view it. it seems to change when I zoom in and out as well. I thought maybe this was just some odd feature with bluebeam and it would still print to the correct size, but it does not, it prints the lines as different sizes. does anyone have an idea why this happens and how to fix? ive viewed and printed from adobe reader and it seems to be okay there but this file will be accessed by multiple other people and they may not be opening and printing in adobe reader..
thanks guys

When you export a PDF you will notice that you are exporting to Adobe PDF. Using any reader beyond Acrobat Pro or Reader is a crapshoot.
For issues with Bluebeam I suggest you contact the developer.

Problem with dashed strokes

I have a GeneralPath that I draw with two different BasicStrokes.
The two strokes are (intended to be) identical except that one is
dashed.
What I'm observing is that in some cases the two stroked outlines
do not overlap, as I'd expect them to. Are my expectations incorrect?
I'm including a simple program that demonstrates the problem.
You can find a (blown up) screen capture here:
http://cradle.brokenglass.com/images/dash.png
This is occurring with (at least) the following:
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2-b28)
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01)
Thanks in advance.
-David
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
public class DashTest extends JFrame {
    class BoxCanvas extends JPanel {
        Stroke      dashStroke_;
        Stroke      lineStroke_;
        Shape       shape_;
        BoxCanvas() {
            BasicStroke ds = new BasicStroke();
            lineStroke_ = ds;
            dashStroke_ = new BasicStroke(
                ds.getLineWidth(), ds.getEndCap(), ds.getLineJoin(),
                ds.getMiterLimit() , new float[] {8, 8}, 0
            shape_ = makeShape();
            setBackground( new Color( 0, 200, 0));
            setPreferredSize( new Dimension(100, 100));
        private Shape
        makeShape() {
            GeneralPath p = new GeneralPath();
            p.moveTo( 20.0f, 70.0f );
            p.lineTo( 70.9f, 70.0f);
            p.lineTo( 70.9f, 20.0f);
            p.lineTo( 20.0f, 20.0f );
            p.closePath();
            return p;
        public void
        paintComponent( Graphics g ) {
            super.paintComponent( g );
            Graphics2D g2 = (Graphics2D) g;
            g2.setStroke( lineStroke_ );
            g2.setColor( Color.BLACK );
            g2.draw( shape_ );
            g2.setStroke( dashStroke_ );
            g2.setColor( Color.WHITE );
            g2.draw( shape_ );
    public DashTest() {
        super( "DashTest" );
        JPanel canvas = new BoxCanvas();
        getContentPane().add( canvas );
        setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    public static void
    main( String[] args ) {
        DashTest app = new DashTest();
        app.pack();
        app.setVisible( true );

Here's the solution:
http://swjscmail1.java.sun.com/cgi-bin/wa?A2=ind0307&L=java2d-interest&F=&S=&P=953
In case that gets moved, the trick is to either turn on antialising:
g2.setRenderingHint(
     RenderingHints.KEY_ANTIALIASING,
     RenderingHints.VALUE_ANTIALIAS_ON
);or to set the line width to 1.01:
BasicStroke ds = new BasicStroke( 1.01f );-David

Apostrophes, quotation marks, dashes causing problems in emails

MacBook Pro
OS: 10.4.7
Program: Mail
Since upgrading to an Intel MacBook Pro (10.4.7), my outbound email has been turning into a weird jumble of glyphs.
For some recipients, my apostrophes and quotation marks turn into a serious of four glyphs...for other recipients, all the dashes and em dashes disappear...for yet other recipients, all the punctuation completely vaporizes.
I’m emailing to an extremely broad set of recipients, as they are my customers from all over the country. No single ISP is in common, no particular browser, etc. The only reason I even know about this is because I’m able to see the catastrophe in my original text included in their responses. Doesn’t matter whether I’m sending from home (with our cable company ISP) or from work (an entirely different cable company ISP)...same mess either way.
Our outbound messages are nearly incomprehensible to read—any suggestions?
MacBook Pro, G4 PowerBook, G4 tower Mac OS X (10.4.7)

The only reason I even know about this is
because I’m able to see the catastrophe in my
original text included in their responses.
That doesn't necessarily mean that your outbound mail is appearing strange to the reader. I would advise you to check that and verify that you really have a problem.
If your readers do see strange characters, it is often because you are sending rich text (which is really html mail) and they are using MS Outlook. Some possible fixes are in this note:
http://homepage.mac.com/thgewecke/woutlook.html
PS Getting rid of all smart punctuation (curly quotes and apostrophe's, special dashes) may also be helpful.

Dashed Line Print Problem

I used the arch tool to create sine waves in Illustrator which are shown below. When the EPS is placed into Acrobat and the PDF is printed the ends of the dashed sine waves print as solid lines. I tried grouping each sine wave and that did not solve the problem. Does anyone have a solution?

Yeah, but you didn't put it in Quark where it goes on my end.
Keeping on topic here. Okay I tried several tests here. Upon placing the file into quark and producing a pdf from Quark is where I did see an issue. It appears as though somehow the spacing on the dots is getting funked up.
The workarounds that I have found is to either save as a pdf out of illustrator -OR- If it must be placed into Quark and then saved as a pdf (for whatever reason...and no I don't recommend) outlining the stroke in illustrator before sending through Quark.
FYI, I use CS 3 on MAC 10.5.7, Quark 6.52, Acrobat Pro 9.1.1, and HP Deskjet 6540

Is anyone having problems syncing iPhoto to iPad 2 after iOS 7.0.3 update? when I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library

When I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library. i dont even see the iphoto content! thx for your help!

I am certain too that it is possibly the 7.0.3 update. Have you tried restoring from backup? I am uncertain that might work but its worth a try.
If that doesn't work I suggest that you give feedback to Apple directly. The more about this problem, the quicker it will get resolved.
Here's the link: http://www.apple.com/feedback/ipodtouch.html
Best,
OrlaG

Cfmail problem

I have a fomr with a query populated select box. When a user
selects their name from the box I am passing their email address
along with ohter contact info to the action page like so:
<select name="AgentName" size="1">
<option>-- Select Name --</option>
<cfoutput query="Agent">
<option
value="#AgentName#,#email#,#VoiceMail#,#CellPhone#">#AgentName#</option>
</cfoutput>
</select>
This works like a charm BUT on the action page I have a
slight problem.
<cfmail
to="[email protected]"
from= "form.AgentName"
bcc="[email protected]"
subject="New Work Order Request for Marketing Dept."
server="mail.360buyers.com"
username="[email protected]"
password="PW">
Requestor's Information:
#form.AgentName#
#form.balanceofoutput# , etc.
The problem is the output in the from field is a comma
separated set of values: agent name, email address, voice mail,
cell phone. When the recipient hits the reply button the "To" field
in the response message contains all the data including agent name,
email address, voice mail, cell and of course this fails.
How can I separate or identify the from email address so the
recipient can just reply to the message when the get it::;
I have tried <cfset form.email = reply> without
success. Nothing happens.
Can someone please point me in the right direction? Thank you
in advance.

Thanks for the response, Dempster. I have tried doing what
you suggested and think you have a good point regarding the comma
in a name. I actually have that situation and never thought about
it before.
Anyway, I am throwing errors (Id not defined in form) when I
write the query on the cfmail page; the query reads:
<cfquery name="AgentData" datasource="TripStats"
username="un" password="pw">
Select ID,AgentName,VoiceMail,CellPhone,eMail
From Agent
Where ID = 'Form.ID'
</cfquery>
The the select list again is:
<td colspan="3"><select name="AgentName"
size="1">
<option>-- Select Name --</option>
<cfoutput query="Agent">
<option
value="#ID#,#AgentName#,#email#,#VoiceMail#,#CellPhone#">#AgentName#</option>
</cfoutput>
</select>
Does that make sense?

Cfmail dash problems

Similar Messages

Maybe you are looking for