Did iTunes send email for us to complete new form to validate account?

Received an email dear iTunes customer you have 48 hrs to validate account. Click link and a form comes up wanting us to complete all personal info, credit card # and cvs #....

What he said!
Here's more of the same : https://discussions.apple.com/message/24132205#24132205

Similar Messages

Sending emails for each record from tabular form

I currently have a requirements management tabular form that used to update or set job requirements inactive and/or covered.
We're a staffing agency and have salesmen across the country that will use this tabular form to quickly manage their requirements to mark them as covered or inactive if the position has been filled.
The multi-row update works fine since the form was built using the wizard, but I need to be able to send out an email for each record that's been marked as covered in the tabular form.
How can this be accomplished?
I'm running Oracle 12c and Apex 4.2.0 on a windows 2008 R2 server.
Thanks again.

Greg,
I took a different approach from what I originally suggested. Since the tabular form is displaying only reqs that eligible to be covered, I chose to construct a process that would read the database after the reqs table was updated. The code should find recent reqs covered by the salesman and then send out an email for each covered req.
Since I cannot see the data structure of your reqs table, I guessed the data type and size for the local variables in the DECLARE section, you many need to adjust these.
Give this code a shot and let's see where we get. By the way, the naming conventions of your database are in need of naming standards.
The process needs to occur After Submit and after the Automatic Row Processing (DML) process that is updating the reqs table. Make sure that the process sequence number is greater than the Automatic Row Processing (DML) sequence number.
DECLARE
   l_id           NUMBER;
   l_index        NUMBER;
   l_vc_arr2      apex_application_global.vc_arr2;
   lc_message     VARCHAR2 (4000);
   l_pkey         NUMBER;
   l_date_wrote   DATE;
   l_sales        VARCHAR2 (100);
   l_client       VARCHAR2 (100);
   l_job          VARCHAR2 (100);
   l_1or2         VARCHAR2 (100);
   l_rate         NUMBER;
   l_notes        VARCHAR2 (4000);
BEGIN
   FOR c1
      -- Retrieve reqs primary key that have been covered
      -- in the last 2 seconds by the salesman
   IN (SELECT pkey
         INTO l_pkey
         FROM reqs
        WHERE     SYSDATE < (date_wrote + 1 / 46200)
              AND active = 'Active'
              AND reqs.sales = :p12_sales
              AND covered IS NOT NULL)
   -- Send an email for each req that has been covered
   LOOP
      SELECT c1.date_wrote,
             c1.sales,
             c1.client,
             c1.job,
             c1.notes,
             c1.who,
             c1.1or2,
             c1.rate
        INTO l_date_wrote,
             l_sales,
             l_client,
             l_job,
             l_notes,
             l_who,
             l_1or2,
             l_rate
        FROM reqs
       WHERE pkey = l_pkey;
      lc_message := 'Date Written   :' || l_date_wrote || CHR (10);
      lc_message := lc_message || 'Sales          :' || l_sales || CHR (10);
      lc_message := lc_message || 'Client         :' || l_client || CHR (10);
      lc_message := lc_message || 'Position       :' || l_job || CHR (10);
      lc_message := lc_message || '#1 or #2       :' || l_1or2 || CHR (10);
      lc_message := lc_message || 'Rate           :' || l_rate || CHR (10);
      lc_message := lc_message || 'Notes      :' || l_notes || CHR (10);
      l_id :=
         apex_mail.send (
            p_to     => '[email protected]',
            p_from   => 'DO_NOT_REPLY@REQS',
            p_subj   =>    ''
                        || l_who
                        || ' Has Covered '
                        || l_job
                        || ' at '
                        || l_client
                        || CHR (10),
            p_body   => lc_message);
      COMMIT;
      apex_mail.push_queue ();
   END LOOP;
END;
Jeff

I have not been able to send email for some time but now i have stopped being able to recieve email.

i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas

That is correct, They don't seem to know about Mac, never got a single scrap of help from them. Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you. I think that's what I did, it was quite a while ago. Hope this helps, or gets you pointed in the right direction. Maybe go to At&t and try creating another account, and if ti works, delete the first.
One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago.

Restrict Broadcaster to not send Emails for certain Queries

Hi,
is there any possibility to restrict a user on sending Emails for certain queries?
With the existing authorizaion objects S_RS_BCS and S_RS_ADMWB it is not possible to do so.
He will need S_RS_COMP to be able to open the Query.
With S_OC_SEND I just be able to take his ability to send Emails, but the user will need this option.
Does anybody has an idea?
Thanks and best regards
Sascha

The Workspace User role ony controls whether the user is allowed to use Workspace or not. A user will only be able to Start a Process in Workspace if they a) are a Workspace User and b) the process security settings allow them to by having the INVOKE_PERM enabled. The INVOKE_PERM setting is usually controlled from within Application Management area in the Adminui and would be set per process to define who is allowed to invoke (start) that service (process). Take a look at your processes and see if they are defined for the All Principals group having the INVOKE_PERM as this is one way in which everybody can start a process.
I'm unfamiliar with the Services User role but if it sounds like maybe this has the INVOKE_PERM so this could be why all your users can start processes, presuming they are all in this role.
But however the INVOKE_PERM priviledge is being granted, it is not via the Workspace User role.
Hope that helps.
Jon

Send email to users after completion of conc program by using Alerts

Hi,
I want to send email to users after completion of concurrent program by using Alerts . please guide me how to create alert and should send email of concurrent program details to user.
Thanks in advance..it's a urgent requirement so help me.
Regards
Narender B

Application Express != Oracle Applications
You got into wrong forum please add here {forum:id=475}

How can i send email for suport to rest my questions' please helpe'

how can i send email for suport to rest my questions' please helpe'

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(109789)

Send email for new customer creation

Can I send email to someone when the new customer has been create through XD01. Is there any userexit to do that. thanks!

Receiving E-Mail and processing it with ABAP - Version 610 and Higher
OR
REPORT zsendemail                    .
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default 'write mail id' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.

HT201269 i want to transfer itune contacts backup for iphone 4 to new iphone

i want to transfer itune contacts backup for iphone 4 to new iphone

You can follow the instructions in the page you linked from: http://support.apple.com/kb/HT2109 to transfer everything from your old phone to your new one. If you only want to transfer contacts and you still have your old phone (or if the contacts are already on your computer) you could sync the contacts as described in: http://support.apple.com/kb/PH12317
Also, if you still have the old phone you could sync them via iCloud without using a computer: http://www.apple.com/icloud/setup/

Email Activity not sending emails for one domain - 10.1.3.4 MLR#10

I have four domains in my BPELConsole. My evey BPEL process has CatchAll block and I'm sending email notification with fault details.
Somehow, my BPEL processes from three domains are sending emails properly but myDomain4 is not sending emails even after successful execution of Email Activity.
1) I have compared the Email code with processes in other domain and they are similar.
2) orabpel.bpelnotification is not logging any error for this notification.
3) I never received any email from this domain. There was no error in logs during domain creation.
3) I am getting following in logs that sending email was successfully executed. It received Notification ID too
<2010-09-22 07:24:44,530> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=4
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 12834c63e81c20d0:-71064af1:42b35e5dab4:-7283
Please help/hint for any possible solution/debugging.

sometimes i have seen emails not being sent when the async invokes takes more time than the overall completion.. And yes, we might still see successful log as emails sent. FYI - I am with 10.1.3.3.1 MLR #8.
did you try just creating a email only process? switch off all other processes in that domain and initiate only this email process to see what happens..

BODS 3.1 :SMTP configuration to send email for success or failure of job

Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
indu

Hi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM

Send Email for manager of the user with Login and Password the user.

Hello everyone,
I need to send an email to the manager of the user with login and password when it is created in AD.
I already have a mail server configured in the IT Resource. It has some component of the IDM that solve this issue?
Anyone you help me with the next steps?
Thank you.

Thank you for your attention.
It did not work, I did another test to send email notifying you when the User change password.
The following error message appears in oim_server1-diagnostic.log:
[2011-08-08T19:21:30.865-03:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Resetting password
[2011-08-08T19:21:30.936-03:00] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 59,612.0.User.RESET_PASSWORD
[2011-08-08T19:21:31.155-03:00] [oim_server1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
[2011-08-08T19:21:32.018-03:00] [oim_server1] [WARNING] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Sending Reset Password Notification is not successful
[2011-08-08T19:21:32.639-03:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Completed orchestration with action result - oracle.iam.platform.kernel.vo.EventResult@4fe0d018
[2011-08-08T19:21:32.642-03:00] [oim_server1] [NOTIFICATION] [IAM-0080011] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Orchestration process with id 59,612 started running in a new thread.
Edited by: Piza on 08/08/2011 15:24
Edited by: Piza on 08/08/2011 15:26

Sending email from a domain that I own (but no account for it on iPhone)

iOS 8.1.3, iPhone 6
I'd like to be able to send email from the iPhone's mail app using a FROM address of [email protected] I own mydomain.com and abc has an email account there.
But I don't want to install an account for [email protected] on the phone (it's a POP account which would involve a lot of fetching, among other reasons).
Any way to accomplish this on the iPhone?
(FYI, GMail allows this, and provides a procedure for verifying that the user actually controls the email address.)
Thanks / Tom

Thanks, that works!
Well, not exactly. I had to fill in the outgoing server settings, but used a bad password. The iPhone reported that the account might not work properly, but it did light up DONE and I was able to save the config.
So now when I'm in an app that allows email, I can scroll through the available "FROM" settings and pick the one I need.
(I just hope this is not taking advantage of a bug in the setup dialog which Apple will close in a future release.)

SPNego - J2ee did not send request for authentication

Hi All,
I have configured SPNego and completed all setup as per documentation. When I use the browser to access the portal, it is prompting for user id and password. If we manually enter the id and password on AD, it works fine. Somehow not able connect to j2ee without prompting for id and password.
To troubleshoot this, traced the http traffic using winshark and found that j2ee engine did not send any request for kerberos authentication.
Is there way to check on the server side to make sure spnego is configured properly and server is able to send kerberos authentication ?
Appreciate your help !
Thanks!

Login to your Visual Admin, then go to -->Security Provider -->com.sun.security.jgss.accept -->Krb5LoginModule
Add a Parameter isInitiator and Value false. Save it and take a bounce of J2EE.
This should solve your login page problem Otherwise paste the default trace.
You can also read my BLOG : Common SPNEGO Implementation Issues
Reward points if my suggestion was helpful -

Campaign execution not send emails for contact persons

Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
Inê

I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
          partner type but000-partner,
          address type but000-addrcomm,
         end of ty_cp,
         begin of ty_bpcp,
           partner1 type but051-partner1,
           partner2 type but051-partner2,
         end of ty_bpcp.
data: it_cp type table of ty_cp,
        wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
        wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
        wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
    select partner addrcomm
      from but000
        into table it_cp
          for all entries in ct_bp_cp_channel
            where
              partner = ct_bp_cp_channel-cp_number.
    select partner1 partner2
      from but051
        into table it_bpcp
          for all entries in ct_bp_cp_channel
            where
              partner1 = ct_bp_cp_channel-bp_number.
    if it_bpcp[] is not initial.
      select partner addrcomm
        from but000
          into table it_bp
            for all entries in it_bpcp
              where
                partner = it_bpcp-partner2.
    endif.
    sort it_cp by partner.
    sort it_bp by partner.
    sort it_bpcp by partner1.
    loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
      read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
      if sy-subrc = 0.
        <fs_bp_cp_channel>-addrnumber = wa_cp-address.
        clear <fs_bp_cp_channel>-bp_number.
        clear <fs_bp_cp_channel>-bp_guid.
      else.
        read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
        if sy-subrc = 0.
          read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_bp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          endif.
        endif.
      endif.
    endloop.
endif.

When I try to send email from my iPad I get the message "A copy has been placed in your Outbox. The sender address hplar45ATcomcastDOTnet was rejected by the server". Prior to this I have used the same process to send email for a year.

I have been using the iPad for email for a year. WIFI connection cannot be established for some reason, I am stuck on 3G. I am sitting next to the WIFI router.
Why can't I send email using my only email address hplar45ATcomcastDOTnet?
Why can't I get a WIFI connection?
What changed?
Dan
<Email Edited by Host>

I can't answer why you are not able to connect to WiFi but I can tell you to try the basic things, turn WiFi off and on again, restart your iPad, reset network settings, reboot your router, forget your WiFi network and try again .....
The issue with the email is probably a password issue. Make sure that your password is entered in the incoming mail server setting and in the outgoing mail server setting as well. The outgoing server setting can be accessed by tapping on the SMTP under the Outgoing Mail Server Setting and then tapping the smtp.comcast.net in the next window under the Primary Server Setting.
The outgoing mail server setting will be in the first window when you tap on the Comcast account in the Mail settings.
Look here for a few different web sites for help with the WiFi.
http://www.google.com/search?q=troubleshoot%20wifi%20on%20iPad

Did iTunes send email for us to complete new form to validate account?

Similar Messages

Maybe you are looking for