Did one "spaces" problem get fixed in 10.6.2??

Hi... I'm out of town right now and won't be updating to 10.6.2 until I get home and can first clone my hard drive. But I'm real curious to see if Apple fixed one big problem (for me anyway) that showed up in Spaces in 10.6 and persisted in 10.6.1... That is the following...
In 10.6 or 10.6.1, say for example Safari is open in Space 1 (it's normal Space) and from that Space 1 you now launch an Excel workbook that you have set up to open in say Space 4, it does just that, opens in Space 4... So far so good... But whereas in Leopard this next part worked ok, since switching to Snow Leopard, the following has been broken... If you are now back in Space 1 say working on Safari and while there you now (while Excel is still an open application with still an open workbook over in Space 4) open yet another Excel document while in Space 1. In Leopard the system would switch over to Space 4 (the Excel Space) and that 2nd document would open... That clearly is the way it was intended to work... But in 10.6 and 10.6.1 that 2nd Excel doc would instead open simply in the space you're in at the moment, in this example Space 1...
So my question is did they fix this in 10.6.2??? I use this feature all the time and I've had to change how I operate (by manually switching to the Excel Space before opening a 2nd or beyond document) and I forget all the time so I end up with Excel docs in various spaces, all hard to find later...
Any feedback??? I did a quick search and didn't see any good news regarding this so my fear is Apple didn't fix this...
Holler back... thanks... bob..

10.6.2 release notes:
http://support.apple.com/kb/HT3874

Similar Messages

More than one Spaces are getting trimmed on BizTalk BAM portal

Hi All,
We are implementing BAM at our customer place , we observed ,if any field contains more than one space in input file then these spaces are getting trimmed in single space,however it is correctly sitting in the BAMPrimaryImport database
For example if input file ,which is processing through BizTalk, and if any field which value is "AB CDE" (field contain three space here ) then in portal it is appearing as
"AB CDE" (Only one space here) by default
I am not sure how theses values are displayed in portal and how to relove this default behiaver of BAM Portal, if somebody have faced this situation then i will appreciate your help please
Thanks
Yash

Well then I guess it's a Portal issue (yes you already knew that!) :-)
I know not everybody agrees with me, but the way I look upon it, the Portal should not be used as a product, but merely as a testing tool and inspiration as to what one can build on top of ones BAM activities. In other words, if you need to present your
BAM data to users, you should build your own; Pivot Tables, Reporting Services, ASP.NET Web sites etc. etc. on top of it.
Don't know if this is true, but I've heard that the BAM portal was a beta-product that shipped for the first time with BizTalk Server 2006 without being completed, and no code changes has taken place since.
Morten la Cour

I have a 4-way scroll button on my Acer that no longer works with the current firefox. Is there a way to make it work? It is frustrating enough that I will probably go to another brouser until this problem gets fixed.

The button used to work until I upgraded, now it doesn't. The button still works for other documents and if I use Internet Explorer Browser. I have windows vista. Any suggestions?

Thanks, Lawrence. I figured that was what I was going to have to do in the end. I have a few games with quite a few hours invested, and I worry that I'll lose the progress I have as they do not save to the cloud. I may have to bite the bullet, and just take the plunge to resolve this. I just want a way to easily transfer my "Home Computer" for my iPhone. My laptop is years old and in need of being replaced, and it's about time to upgrade my phone. These life events piling up are making me consider switching to a friendlier OS. I'm not using this as a threat. I just hope some apple high up will read this, and realize that we need alternatives. Life happens.
Thank you both Paul and Lawrence. I clicked "This helped me" not knowing it would remove the option to choose "This fixed my problem" too. For anyone else reading this thread. Using the guide provided has done both. It has helped me and given me a fix to my current problem. Lawrence has also provided me with the last bit of information I feel is missing from wjosten's guide. That syncing will completely erase all of your data and reinstall it in one fell swoop. It's a great fix. Even if it isn't the exact one I wanted. Thank you again!

When will portrait format rotate problem get fixed?

A Slide Show generated in Organizer and output to Premiere Elements for video editing can still have problems with Protrait Format photos.
These photos have proper orrientation in both Organizer and the Slide Show when viewed in Orgaizer. However, when the Slide Show is transfered to Premiere Elements for video editing and production, some Portrait Orrientation photos lose their proper orrientation and end up laying on their sides.
This problem appears to be camera specific. My Canon SX230HS is an offender. This problem can be avoided by using an edited version of the photo. However, that is a pain if the photo does not otherwise require an edit. I believe that in PSE/PrE Version 8, the problem could be corrected by a simple rotate left and rotate right sequence in Orgainzer. However, that "work around" appears to have gone away with the PSE/PrE Version 9.
This problem is a real pain when producing a slide show containing photos from multiple cameras. I would think that if PhotoShop Elements, Editor and Orgainzer are aware of Photo orrientation, then Premiere Elements could also have the same intelligence.

To permanently alter the Rotation of portrait Images, yes, that would be a good workflow.
I normally shoot in RAW (Nikon or Canon), and then process the Images in ACR (Adobe Camera Raw) through Photoshop. There, I will do the Rotation, and when I Save_As PSD, the Rotation is permanent. For users of Adobe Lightroom, the operation is the same. I assume that it will be the same with PSE, but have to admit that I have never used that program. Still, in most respects, it works just like its "big-brother," Photoshop. Now, I also use Adobe Bridge (big-brother to Organizer), and with that Save_As, it will handle the task of Rotation too.
One thing that I have never experimented with is the differences between doing the Rotation in an Image editing software, like PS, vs doing it with the Fixed Effect>Rotation in PrE, or PrPro. Based on the Scaling algorithms in PS vs PrE, or PrPro (up to CS 5), I would think that the Image editing software would be a bit better, but that is ONLY a guess on my part, and especially as the Rotation algorithms will be different than the Scaling algorithms. Maybe I need to do some control testing, though my workflow is set up to do the Rotation in ACR.
Good luck,
Hunt

Does any one know how to fix width of column generic and also wrap data without space

I make following changes in Template > Column Template > Column Template 1
<td #ALIGNMENT#; headers="#COLUMN_HEADER_NAME#" style="width:300px; white-space:-moz-pre-wrap !important;word-break: break-all;"> #COLUMN_VALUE# </td>
data is wraping but width is not getting fix.
so any one can tell me how to solve the problem.

Hi,
It is much easier help on layout issues when you create example to apex.oracle.com.
Regards,
Jari

Problems getting a TV fixed or exchanged

I am having problems getting a black friday tv purchase fixed or replaced. I bought the doorbuster 50" panasonic TC-50A400U on thursday along with the 2 year protection plan, took it home and it has vertical lines on left center of the sceen. Went into a store on saturday to fing out what to do, was advised to call 1-800-geek-squad because it was a 50" tv.
Geek Squad came out yesterday immediately diagnosed the problem, called it in and was told that panasonic is not going to provide the needed board to repair it and I would have to bring the tv in for an exchange as it is within the return policy period. Of course there are none in stock and will take at least a week to get a new one. While I understand the TV was a special deal, it should not mean that it or the person buying it should be treated any differently than soeone buying a more expensive tv or other product.
I feel this reflects poorly on Panasonic as well as they do not seem to want to stand behind products that they are selling unless it is a certain price point

Hi there pjmccarthy63-
Thank you for your patience while we worked through our backlog to reach your post. We’ve been very busy since the Thanksgiving holiday and it’s taking us a bit of time to catch up.
Congratulations on getting your hands on one of the Panasonic doorbuster TV’s. I can only imagine how disappointing it was to see that it wasn’t working correctly and that the only option available to us was to exchange it for you, which meant waiting for us to get stock back in.
Normally during the manufacturer warranty period, we have to follow the manufacturer’s instructions regarding potential repairs, so if they stated that it would be more economical to replace that to repair, we do need to follow those directions. It does appear that since you’ve posted, we did get more of these TV’s in stock and that you’ve completed your exchange. I hope that the new television is working well and you are enjoying it!
Thanks for posting and Happy Holidays!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore and they were not at all encouraging, saying they doubt that the

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore but they were not at all encouraging, saying they doubt that Apple warranty will cover something like this, and also that the whole keyboard would have to be replaced as they don't do individual key repairs.
This is very unreasonable to me. Firstly, the keyboard does work (is not actually broken) although the intermittent clicking sound of a single key is very irritating to me and I expect more from an Apple product than a flawed keyboard.
Any thoughts, tips and insight on this greatly appreciated.

Just wanted to conclude by saying that I did go to an Apple store and after supplying proof of purchase and verifying the warranty etc, I had my MacBook checked out by one of the technicians who (after finding that my machine was immaculate bar the sticky keyboard of course) they replaced the entire keyboard within a week.
I was so happy with the helpful and prompt service and am now so happy with my new silent keyboard!
Also wanted to add that the young guy who told me at the iStore that he doubted Apple would support this and guessed Apple likely say it was due to user damage was being a tool, and he was obviously assuming that I had done something wrong to break my keyboard.
This was my first Mac purchase and I was delighted to find that the support is genuine and not just a rumor... I have since gone on to purchase an iPad2 will probably buy the iMac too once my trusty PC needs replacing. I was never a PC hater and got on well with windows, and was actually reluctant to make the change - but so far so good :)
Thanks for all the help!

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program.

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
Thanks for any help.

You have to change the cursor focus.
What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
For Flash, if you click on the page outside of the video area/box, F11 should work.

My mp3 player has a hard disk problem, where can I send it to get fix

I have a Zen Sleek and it basically busted and out of warrenty. I can't format the dri've nor can I reload the firm ware. I just get a picture that says hard disk problem. No where on this site can I find a place to send it to, to get fixed. I emailed customer support and those people would not even help me because I was out of warrenty. They did not even give me an address to send the thing to get fixed. Whats up with that?

If you're out of warranty you'll have to call Customer Support to get service. The number to call should be in the support folder on your install CD, or you can use the Tutor phone number from the "Contact Us" section of this site.
Dale

I'm sure this is a setting fix, but can't find it-. All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top. How do I adjust so none of them open unless I choose to?

I'm sure this is a setting fix, but can't find it…. All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top. How do I adjust so none of them open unless I choose to?

Remove the check in the box "Reopen windows when logging back in":

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

My iphone 3gs is acting weird, every time i get a call or if i try and call some one my iphone gets random black lines down it) so what can I do to fix it?

My iphone 3gs is acting weird, every time i get a call or if i try and call some one my iphone gets random black lines down it) so what can I do to fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Why does fix capitalization work when there is only one space after the period in pages 09?

why does fix capitalization work when there is only one space after the period in pages 09? For example: "Turn on 3rd St. After the traffic light." There is only one space after the period in "St." shouldn't it only auto correct after TWO spaces..?? the word After, should be after..

You may also use a noBreak space after the period at the end of the abbreviation.
If I remember well, in such case the capitalization will not apply.
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

Did one "spaces" problem get fixed in 10.6.2??

Similar Messages

Maybe you are looking for