Diff between BW3.5 n BI7.0

hello experts!
can any one tell me abt wot r the changes that r made to BW to become BI
n
wot is netweaver 2004 n ECC
how does this help to BI
n
wot r the major diff between BI n BW,
thnx
gagan deep

Hi Gagan,
Welcome to SDN...
Thare is a lot of change between 3.5 and BI7
NW2004s Concepts
New NW2004s Data flow
R/3---->PSA only (using Infopackage) for all the Loads -Mandatory
PSA -
>ODS/Cube -->load using DTP ,create transformation first
No Datamart architecture in NW2004s
so ODS -
>Cube load using DTP ,creating transformation first
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explanations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
ODS to Cube -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Assign points if this helps.
Regards,
Anil

Similar Messages

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

What are the Major and Minor Diffs between oracle,sql server,MSAccess

Hi all,
Can any one explain or send me all the diff between
oracle ,sql server,access..like how much data can each
support,...
Thanks

Dear sir,
here it is.
http://www.oracle.com/database/product_editions.html

In LSMW, what is diff between LSMW-BAPI and LSMW-IDOC

hello all
In LSMW, what is diff between LSMW-BAPI and LSMW-IDOC

Hi Swamy,
The differences between IDoc and BAPI are as follows:
IDOC
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system.
Idocs are processed asynchronously and no information whatsoever is returned to the client.
The target system need not be always online. The IDOC would be created and would send the IDOC once the target system is available (tRFC concept). Hence supports guaranteed delivery.
With asynchronous links the sub-process on the client can be finished even if the communication line or the server is not available. In this case the message is stored in the database and the communication can be done later.
The disadvantage of asynchronous links is that the sub-process on the server cannot return information to the calling sub-process on the client. A special way for sending information back to the client is required. In addition, a special error handling mechanism is required to handle errors on the receiving side.
IDOCs may be more changeable from release to release.
IDOCs are poorly documented.
BAPI
BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
BAPIs are called synchronously and (usually) return information.
For BAPIs the client code needs to do the appropriate error handling.
Problems with synchronous links occur if the communication line or the server is temporarily not available. If this happens, the sub-process on the client cannot be finished (otherwise there would be data inconsistencies).
Synchronous links have the advantage that the sub-process on the server can return values to the sub-process on the client that has started the link.
BAPIs are not totally immune to upgrades.
BAPIs are reasonably well documented.
Reward points if useful.
Best Regards,
Sekhar

Diff between programme BBP_GET_STATUS_2 & CLEAN_REQREQ_UP in SRM7.0

Hi Experts ,
We have ECC6.04 with SRM 7.0 with Classic Scenarion
I am confused over exactly what BBP_GET_STATUS_2 do in SRM ?
I believe CLEAN_REQREQ_UP update the SC with follow on document i..e Classic PO....
and BBP_GET_STATUS_2 update the entries in BBP_DOCUMENT_TAB..but not getting exactly what is does..since if we change qty in Classic Po ..it automatically updates automatically in SC follow on document...if we Craete GR in ECC it updates automatically in SC follow on document...
Can anyone please suggest me exactly what BBP_GET_STATUS_2 do in SRM ( what is exact diff between both )?
Thanks
NAP

Hello,
Report : BBP_GET_STATUS_2
Function : This reports updates the requirement coverage requests (Shopping carts) to ensure that information on the status of backedn purchase requisitions, purchase orders, and reservations is up-to-date.
You should schedule this report to run daily in the SRM server system.
Report : CLEAN_REQREQ_UP
Function : Interval for update check.
Updating of documents (purchase requisitions, purchase orders, reservations) is executed asynchronously in the backend system. You can only process the requirement coverage request in the SRM server system further after the update has been carried out. At the interval defined by you in Customizing, the system checks whether the documents have been updated and thus if you can further process the requirement coverage request.You should schedule this report periodically.
Hope this helps.
Best Regards,
Rahul

Diff between Thin client and Rich client

Hi Everyone,
Can someone give me a clear picture of the what is the diff between Thin client and Rich client.
Thanks,
Krishna

Hi,
thick client (rich client) has/stores all the data inside itself
so it can do application processing without the server with data
thin client uses resources from host computer (from server)
and wihtout that you are not able to work with that kind of client
does that answer your question ?
Regards,
michal

Diff between Seeburger Adapter and File Adapter

Hi All,
My company needs to interact with some banks and the banks are particular that they want SFTP, which is not supported by File Adapter, so we have decided to go with Seeburger adapter.
Now what are the differences between File adapter and seeburger adapter?
I believe that Seeburger adapter does not support File Content Conversion, Archiving etc.
Could you all pls put some light on the diff between file adapter and seeburger adapter when it comes to dealing with files?
Xier

Hi
You are aware with working of File Adapter.
The most direct way of using the Seeburger adaptors is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to
1. Define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. Using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. Create a one to one mapping between input en output.
4. Export the metadata in xsd or sda format for import in XI
5. Generate an SDA which can be deployed in XI and used as a module.
Have a look here,
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Some Seeburger related information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
Go through this threads:
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks

Diff. between Tax Code and Condition Types

Hi,
What is the diff. between Tax Code and Condition Type???
Why we maintain Tax Codes under Invoice Tab in PO, when Condition Types are available for Calculation Procedure...???
Please guide..

hi..
Tax code : Tax code in some what more specific for calculating the tax...some material is having 2% tax..some having 3 % tax..etc..and these are input tax...so..these tax code will be of type input tax..
now..based on the nature of tax type amount will be calculated....
suppose tax code is calculation of 2 condtion type so ..we can do it in tax code conditon record fv11 also..
so..tax code can be a combination of cond type...
where as through cond type also we can also achieve this..by using one statistical cond type...
Cond Type : cond type is for the daily pricing configuration..how system will calculate the price for a centain material we can make define the rules here...
Try this out..
Thans

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

972471 wrote:
Static Tables Creation In oracle & Diff Between Static table ,Dynamic tableAll tables in a well designed application should be static tables.
Whilst it's possible to execute dynamic code and therefore create tables dynamically at run time, this is considered poor design and should be avoided in 99.99% of cases... though for some reason some people still think they need to do this, and it's never really justified.
So what issue are you facing that you need to even bother considering dynamic tables?

Diff between oracle 10g and 11g

Can any one could tell me what is the main diff between oracle 10g and 11g ?
Thanks in Advance
Venkat

Hi,
You can read
http://www.oracle.com/technetwork/articles/sql/index-082320.html
http://www.oracle.com/technetwork/articles/sql/index-099021.html
Anand

Can't see system list in BW3.X/BI7.0 BEX Analyzer logon window

I used to be able to see our different BW system list in the logon small window when trying to open a query from a BW3.X/BI7.0 Analyzer which should be the same system list for SAP Logon screen.
But my computer was infected by virus that the operating system has to be reinstalled and then I have SAPGUI 7.10+Add-ons with SAPLOGON Customizer installed and I can see the system lists in SAP Logon screen. Then I have reinstalled BI7.0 BEX, but when I run either BW3.X Analyzer or BI7.0 Analyzer and open query, the logon small window pops up with a blank system list.
Any idea on how to make the system list show up in the logon small window when opening query in BW3.X/BI7.0 Analyzer? Maybe I need to have SAPGUI 6.40Add-ons with SAPLOGON Customizer installed first before I have SAPGUI 7.10Add-ons with SAPLOGON Customizer installed?
Thanks for any suggestion!

Have you copied the inf file from another system and copy it to windows system directory?
You need to have that copied or you need manually each and every system using the server name and System ID
thanks.
Wond

Diff.between Taxinn& taxinj

hi sap guru's
can anybody give me exect diff .between Taxinn& taxinj ?which is good? and why? give me at least 2 to 3 point
in TAXINN where we creat tax code execept FTXP
regard's

TAX INN
If you are using TAXINN procedure you have to maintain separate condition record in tcode :FV11
JM01
JM02 etc
While creating purchase order the tax will be flowing based on the condition record
For all the vendor the same taxes are applicable.
currently TAXINN is commonly used
TAXINJ
In this procedure you have to maintain taxcode in FTXP.
while creating P.O taxes will be flowing from the Taxcode.
Say for Example
V1-16 %Excise duty+4%VAT +Cess
V2-8 %Excise Duty 4% VATCess
For the same vendor you can use either the taxcode V1 (or) V2
G.Ganesh Kumar

In GL Master- Diff between Open Item & Balance Summary

Hi Experts
In GL Master- Diff between Open Item & Balance Summary ?
Regards
Ramakanth

Hi,
Open Item :- Select this tick if you want to see all individual line items that makes the total of the account. By selecting this tick you will be able to see both open and cleared items. GR/IR accounts should be managed on open item basis.
Line Item:- Tick this if you want to see the balance of an account by individual postings. Generally Revenue & Expense accounts should be managed on line item basis.
Hope this will help.
Regards
Valay Pandya

Diff between Phy inv number and Phy Inv reference in Mi01,Mi09

Hello Experts....
need ur help!!
Can any one explain me what is the diff between Physical inventory number and Physical Inventory Reference in MI09 tcode.Entry count w/o reference document.
Thanks in advance

sapppfresher wrote:
Hello Experts....
>
> need ur help!!
>
> Can any one explain me what is the diff between Physical inventory number and Physical Inventory Reference in MI09 tcode.Entry count w/o reference document.
>
> Thanks in advance
hi,
Physical inventory number
Specify a number or name under which several inventory documents can be grouped together for improved processing
Reference Number for Physical Inventory
Specify the number of a document outside the system that relates to an inventory transaction.
means if you are using MI01 then you have to maintain the data in mi04 . but you are using mi09 no need to maintain the datad directly you are go through with mi07 for posting the differences.
thanking you.
Edited by: A.Purihella on Oct 13, 2011 8:19 AM

Diff between Purchase quotation (From Draft n direct document add)

hi.
i need a small information.
Normally We an add purchase quotation...Directly..
but in my case
I implement approval Procedures at purchase quotation..
So, If any body Add it first it is going to Draft mode..
We can add purchase quotation 2 ways.
form draft to purchase quotation
direct purchase quotation.
my question is in data base is there any field
document coming from draft or direct..
plz inform me if u have any information....

hi.
Taruna Talwar
Thanks for your reply..
Still my requirement is open..
Imagine..
i have added two documents at purchase quotation.. ok.
One is from approval i have added one is from direct from the purchase quotation screen ok
now tell me..
what is the diff between these two documents,
how can u say document1 is comming from approval other one is from directly posting..
i mean in opqt is there any field like draft or direct like this
any info plz update me...

Diff between BW3.5 n BI7.0

Similar Messages

Maybe you are looking for