Difference between File adapter and FTP adapter
hi,
I would like to know what is the difference between File adapter and FTP adapter
thanks
Yatan
Both file and ftp adapters are non-concurrent jca adaps, however we go for file adapters mostly when you have files on your local environment and do not need to wait for someone to FTP the files on a timely basis. In case of FTP Adapter, we would need an FTP Server, a remote location with access where in files pitch in for polling.
Also, File adapter is dependent on the local folder and OS, however FTP adapter is dependent on the local as well as the remote file system/OS/folder permissions/user access.
Similar Messages
-
What is the Difference between AQ adpater and JMS adapter??
What is the Difference between AQ adpater and JMS adapter in BPEL11g??
In what scenarios we go for AQ and for what scenarios we go for JMS adapter???Go for AQ when using Oracle Advanced Queueing (the database stuff).
Use JMS when using JMS (in memory of file queues)
hth,
Peter Paul -
How to generate .pdx file using File Adapter and FTP Adapter
Hi,
is it possible to genearate .pdx file using oracle ESB Adapters(File Adapter and FTP adapter).
Can you anyone guide me.
Thanks,
Raj.hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf' -
How to change JNDI dynamically in DB adapter and FTP adapter
Hi every one,
Please any one explain "How to change JNDI dynamically in DB adapter and FTP adapter" with screen shots
Thanks in advanceYES, very much possible. Only with CRUD operation on a table is possible.
Please refer the below URL, where you can see the multiple check box selected under "Perform an operation on a table" under Operation Type.
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#BDCGADFJ
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Going forward, please raise this as a separate thread. So that people will get benefited.
Thanks,
Vijay -
What are the differences between file vault and legacy file vault?
what are the differences between file vault and legacy file vault?
Legacy is an encrypted disk image of your Home folder, FileVault2 is whole disk encryption
-
BPEL process with DB adapter and FTP adapter
Hi ,
i need to read a table contents using DB Adpter after recieving the data i need to write a swich condition on column value of each record and dependin og the criteria i need to write the record in an appropriate file
can any one help me out by giving any similar reference BPEL process
regards,
Anasuya Vemuri.Hi,
Configure the DB Adapter as a service in your composite which does polling the table in the DB, there are many settings in polling, make your selection according to your business needs. Configure the FTP Adapter as a reference in the Composite. And use switch activity inside the BPEl if you want to check something like if else cases. And invoke the FTP Adapter and before that populate the invoke input variable values using assign activity copy operation. Make sure you create connection factories for both adapters and populate the important attributes for them in the SOA Admin Console.
http://kr.forums.oracle.com/forums/thread.jspa?messageID=9784730
Hope this helps....
Thanks,
N -
Difference between system dsn and file dsn
what is the difference between file dsn and system dsn
System dsn will always be available in the system (it is saved in the system registry) and it's not depends on who created the dsn, but file dsn will depends on a file, so if somebody else use the system, the file dsn might not be available for this person.
-
FILE and FTP Adapter file size limit
Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PMOk Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
<operation name="MoveWithXlate">
<jca:operation
InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
SourcePhysicalDirectory="foo1"
SourceFileName="bar1"
TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
TargetFileName="purchase_fixed.txt"
SourceSchema="address-csv.xsd"
SourceSchemaRoot ="Root-Element"
SourceType="native"
TargetSchema="address-fixedLength.xsd"
TargetSchemaRoot ="Root-Element"
TargetType="native"
Xsl="addr1Toaddr2.xsl"
Type="MOVE">
</jca:operation> 7. Edit the outbound header to look as follows
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
<element name="OutboundFileHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="sourceDirectory" type="string"/>
<element name="sourceFileName" type="string"/>
<element name="targetDirectory" type="string"/>
<element name="targetFileName" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types> 8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
<assign name="Assign_Headers">
<copy>
<from variable="inboundHeader" part="inboundHeader"
query="/ns2:InboundFileHeaderType/ns2:fileName"/>
<to variable="outboundHeader" part="outboundHeader"
query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
</copy>
<copy>
<from variable="inboundHeader" part="inboundHeader"
query="/ns2:InboundFileHeaderType/ns2:directory"/>
<to variable="outboundHeader" part="outboundHeader"
query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
</copy>
</assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James -
Difference between HTTP adapter and SOAP adapter
Hi All,
Can any one tell me abt what is the main difference between HTTP adapter and SOAP adapter.when we'll use these eactly?
Thanks
pullarao.Hi Rao,
Please go through the below links to understand it:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
More links for SOAP Adapter:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
More links on HTTP adapters.
/people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
Regards,
Subhasha -
The difference between SOAP adapter and WS adapter in PI 7.1
Hello all,
can anybody explain what is the main difference between SOAP adapter and WS adapter in PI 7.1?
I have checked this [link|http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
but was not able to find the real difference.
Or better, what can I do with WS adapter I can't do with SOAP adapter? What are their advantages/disadvantages?
Thank you all, Igor.In addition to RM, ws adapter also support other ws standard like SAML which is not available in SOAP adatper. Beside:
if your sender or receiver is SAP system, you can also monitor the message in the sender/receiver in addition to the PI box. This is a very good thing, because sometime the MONI in PI shows nothing wrong, but the MONI in your receiver will show you error message that's only related to the receiver system.
However, if you define ws sender CC, and your ws client doesn't support RM, you will have issue sending ws request.
And ws CC will generate ws runtime in PI box, if your configuration is wrong (like user name and password not correct), even if you correct it, the ws runtime sometime won't be regenated based on the correction. In this case you need to delete the ws CC/agreement, and re-create it with all correct information.
Beside make sure your basis team configured the PI system properly regarding ws. If not, you will have lot of pain to figure the problem which was my case.
Jayson -
Difference between webservices model and adaptive webservices model
hi
Can any one explain me regarding Difference between webservices model and adaptive webservices model.
ThanksHi,
In old WS Model, ithere was no concept of logical destinations.
There if you are using a WSDL located on a server and if the location of the WSDL
changes, your application won't run. The deployed application using the WS Model will have trouble finding
the WSDL. As a result you'll have to again import the
model. Moreover old WS Model does not have re-import functionality.
But incase of AWS Model, you can desine logical destinations and even if the location of the WSDL changes, all you have to do is change the new url in the Visual Admin and not import the model again.
You can visit the following link for more details:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
Regards,
Nidhi -
Difference between OA Adapter and DB Adapter
Hi All,
i am very new to SOA, Let me know the difference between OA Adapter and DB Adapter.
thanks
HariThe EBS (OA) Adapter is mainly a sort of wrapper around DB and AQ adapter supporting the different interfaces of EBS including Business Events(AQ).
The adapter introspects the Integration Repository. And it sets the responsiblity/application context for you when connecting. The ebs-user and responsibility are set in the wsdl. Using the database adapter you should take care of that yourself.
Honestly, if you're basically using custom-plsql api's or the pl/sql api's of ebs (eg. TCA) then you're perfectly fine with the DB-adapter. The only thing is that you should set the responsiblity in the pl/sql yourself (for example in the intialization block of the pl/sql package).
Regards,
Martien -
Difference between AQ Adapter and JMS Adapter
Hi All,
i am very new to SOA. let me know the difference between AQ Adapter and JMS Adapter.
thanks
HariPlease go thru the bellow link
http://www.mscd.edu/~ittsdba/oradoc817/ois.817/a83729/adois07.htm#408020
Krishna -
Difference between XI adapter and HTTP adapter
Hi,
I am not very clear on the exact difference between XI adapter and HTTP adapter.
I want to know, when should we use XI adapter and when to use HTTP adapter.
Regards,
SantoshHi,
We use HTTP Adapter in case of the Application is trying to post the HTTP Request message to XI and able to receive the HTTP Message from XI also.
While using the HTTP as Sender , HTTP Sits on ABAP Stack and can able to communicate with the Integration Server Directly, No need of any Adapter here, it is adapterless communication
In Case of Client Proxies
Source application can directly interact with the XI by executing the report in SAP R/3 & will be able to send the XML data to IS,
So no need of the XI Adapter in this case to post xml to XI.
In Case of Server Proxies
Now XI has to post the xml data to the Target Application, here some thing shld be there to establish the medium with the Target System. So we use XI adapter here.
In the receiver case, we need XI Adaper to communicate XI integration Server with the Local Integration Engine( Which we made in SAP R/3's Business system as local IE) to post the data
Basically XI adapter will be used in normal scenarios also to communicate Adapter Engine with Integration Server internally while delivering the msg.
Check this Msg Flow how the XI Adapter is used in Normal Scenarios
Understanding message flow in XI
REgards
Seshagiri -
Difference between WCF-NetTCP and TCP/IP adapter
What is the difference between WCF-NetTCP and TCP/IP adapter ?
Are both work in the same way or there is any similarity in their working ?
PrakashHi Ashwin,
Yes,I am referring to Codeplex based community adapterhttp://tcpipbz2010.codeplex.com/ for TCP/IP
adapter.
As from your reply ,both adapters can perform the same task .Right ?
Actually I am using socket programming to connect TCP/IP adapter.
Can I do this with WCF-NetTCP adapter ?
Prakash
Maybe you are looking for
-
Ever since I downloaded the latest Mac Office 2011 Service Pack, no matter what URL I list as my Home Page preference in Safari, it opens to another page that I never selected. Over 26,000 people have viewed/commented on this issue with no viable ans
-
How to disable an iMessage phone number on selective devices?
I am using an iPhone 5S along with family sharing and my other family members(with their multiple other Apple devices including iPhone 5c, iPad Air, and iPhone 6) have the option to receive and send messages using my phone number. So, I was wondering
-
Trying to figure out how to scan an image directly into Elements 12 (for Mac). Just "upgraded" from 6 and can find no answers other than to go to Apple menu, scan in with Preview or Image Capture, save to desktop, then retrieve with Elements. Reall
-
24p to a 30 fps sequence conversion
24P to 1080i/30fps Hello everyone. I am trying to combine footage shot on the SDX 900 at 24p with footage shot on the HPX 500 at 1080i/30fps My sequence is 30 fps. The 24p looks jerky & I am not sure what to do. Does anyone have any suggestions? Rega
-
How to make setEditable() work for Applet
I have a program using a flag to make it work both in JFrame and JApplet. I have a couple of JTextField variables and I use setEditable() to set their attributes. When I run it under JFframe, I have no problem to edit these JTextField within panels.