Difference between interfaces in Java API and user defined interfaces

Is there any differences between the interfaces (such as KeyListener, ActionListener and EventListener etc.,) in Java API and the user defined interfaces.
The user defined interfaces seems to be empty without any functionality (except its constant and method declarations). But the interfaces in Java API seems to have some functionality behind them, since they route the device events to the programs.
Actually what is happening behind the Java API's interfaces?
Please clarify.

Ummm, no they are not (or at least some of them are not). Also, some things we support now we may not have supported in a previous release.
If you look at the section 2 (Working with TimesTen Data Stores0 in the TimesTen Java Developer's Guide and look at the sections:
TimesTen JDBC Extensions
Additional TimesTen classes and interfaces
then you will see the extra functionality documented there. Of course, if you do not need any of this functionality then you can simply treat them as the base classes from java.sql and they will work fine so it is easy to make most of your code generic.
Chris

Similar Messages

Value mapping, interface mapping, standard funtions and user defined functi

I like have more information abt live scenario's use of value mapping, interface mapping, standard funtions and user defined functions.
How to create user defined funtions and how to use it in XI?
thanks in advance
shiva

Hi,
Interface mappings register your mapping program for an interface pair in the Integration Repository. If you require a mapping at runtime, it is sufficient to select the interface mapping for the interface pair at configuration time .The Integration Server uses the interface mapping to identify associated mapping programs for request messages, response messages, fault messages, or all three.
Features
Executing Multiple Mapping Programs for One DirectionBy using an interface mapping you can execute multiple mapping programs consecutively for the transformation of a request or response message. In such cases, an interface mapping comprises multiple steps for which the following applies:
●     The steps are executed in the sequence specified (from top to bottom). The result of the mapping program from the previous step is forwarded to the mapping program of the subsequent step.
●     Each step can reference a mapping program that executes a 1:1, 1:n, n:1, or an m:n transformation. In the case of multi-mappings (1:n, n:1, or m:n), the previous step must create the same number of messages that the subsequent step expects.
●     Multi-mappings use one envelope to put all messages in one structure. If one of the steps references a multi-mapping program, all subsequent steps must use the same envelope.
The mapping for a request message comprises two message mapping programs: one 1:1 transformation and one 1:n transformation. Since the latter message mapping uses the multi-mapping envelope for both the target message and the source message, the message mapping for the 1:1 transformation must also create a transformation result with a multi-mapping envelope.
You do not strictly need to divide up one direction of the whole mapping into different steps. However, this enables all the message formats in one system landscape to be mapped to a central message format, for example. This results in less mapping programs being required because you no longer need to be able to map all the different message formats to each other
Activities
       1.      Create a message mapping on the design maintenance screen of the Integration Builder (see also: Creating an Object).
You can also create multiple interface mappings for the same interface pair.
       2.      Enter the source and target interfaces that require a mapping of the request message, the response message, the fault message, or all three, in the table of the same name. The following restrictions apply:
○     If you want to use the interface mapping in a transformation step in an integration process, you must only specify abstract message interfaces. Furthermore, all objects (integration process, interface mapping, and all objects that reference the interface mapping) must be in the same software component version. If you want to reference objects from underlying software component versions, you must access the objects from the Basis Objects branch (in the navigation tree or using an input help).
○     If you want to map multiple messages to each other by using a multi-mapping, you can only specify asynchronous interfaces (for further restrictions, see: Multi-Mappings). If any message interfaces are missing, you can also create them by using the function Create New Object ().
If the interface cannot be imported or cannot be created in the Integration Repository (in the case of an external adapter, for example), you must enter the interface names manually. However, it is not possible to check the technical name in this case.
       3.      To import the properties of the interfaces, choose Read Interfaces. The table in the lower area displays tab pages for the request message, response message, and if available, for the fault message, for each mode of the interfaces (either synchronous or asynchronous).
       4.      To develop an external mapping program, export the XSD schema of the respective request or response message as a zip file after you have imported the interfaces. The zip file can contain multiple schema files that reference each other, for example in a multi-mapping. In this case, the schema with the global message element has the name MainSchema.
       5.      To reference a mapping program for the respective message, you have the following options:
○     Select an existing mapping program from the Integration Repository by using the input help (). If this is a message mapping, the default setting of the input help only displays those message mappings that are found using the source and target message in the Integration Repository (in multi-mappings, the first source and target messages are used as the search criteria). However, you can also display any number of message mappings, for example, because you are constructing a mapping from several mapping programs with intermediate instances which have no message types.
○     You can create message mappings directly from the interface mapping. To do this, select the mapping type Message Mapping in the Type column. Position the cursor in the Name column and choose the function Create New Message Mapping () in the Mapping Program frame. The Integration Builder copies the specifications of the messages and their occurrence directly from the interface mapping.
An interface mapping can only reference mapping programs that belong to the same or an underlying software component version of the interface mapping. This ensures that the mapping program can be shipped together with the interface mapping (see: Software Logistics).
       6.      If it is not a mapping for a fault message, you can execute multiple mapping programs in succession for request and response messages:
○     To insert an additional line for a mapping program, choose .
○     To delete the registration for a mapping program, choose .
At runtime, the mapping programs are executed from top to bottom.
       7.      Save the interface mapping.
Regards
Aashish Sinha
PS : reward points if helpful

Administration differences between an As Java system and an As ABAP system?

Hi, I'm not that familiar with SAP systems that are As Java based only, so apologies in advance if I ask real stupid questions here!!
Can someone please explain how one logs onto an As Java only system?... ie without the ABAP stack does one still use the SAP logon pad or am I getting confused here totally???
Also how does one do transports in an As Java system?
If you could send me a document that explains the main differences between an As ABAP system and an As Java system, particularly the differences in administrating these systems that would be very useful. My email address is [email protected]
Many thanks
Ash

Hi,
Can someone please explain how one logs onto an As Java only system?.
You can login through browser, use NetWeaver Administrator for most of your activities. There is also Visual Administrator/ Config tool etc these have seperate GUIs.
It would not be easy to list out the options but i suggest you read understand info from help regarding the details below so that you can administer Java servers:
Visual Administrator
NetWeaver Administrator
Config tool.
SDM
With the knowledge of the tools above you can start of administrating Java servers.
Also how does one do transports in an As Java system?
You install Portal on Java server and then do transports. You should be having a system administration role.
Please do a search in help.sap.com and you will find loads of data on WEBAS Java administration.
Thanks & regards,
Vijith

XmlBeans and user defined interface...Does it work within WLW?

I'm attempting to build an xmlbean with a user defined interface that our xmlbean ( derived from our xsd) will implement.
 
I have tried this using the samples from the Apache Xmlbean project ( v1.0.4 ) and the BEA version; both have worked.
 
I was wondering if anyone has attempted this and managed to achieve success using this via the WLW build process.
 
I have removed the reference to the our xmlbean within the handler and used the com.bea.xml.XmlBean reference. This worked with both apache and BEA tests. This also reduces the need for a circular build process ( ugly at best! )
 
I get the following error message:
 

ERROR: localInfo.xsdconfig:35: Interface 'com.extension.weatherExtension' not found.
ERROR: localInfo.xsdconfig:35: Interface 'com.extension.weatherExtensionHandler' not found.

 
It woud seem that i am missing the java classes fromthe classpath....however i echo out the classpath during the build and my compiled jar is there.
 
Any thoughts?
 
Thanks

Andy,
Let me see if I can help.
Groups A and B and assigned to group C. That means members of group A are also members of group C. Members of group B are also members of group C.
However members of group C are only members of group C. So any roles you assign to group A apply only to group A. Likewise with B, roles assigned to group B apply only to group B.
Now, assign a role to group C and members of groups A, B, and C have that role. So assign general roles to group C and more specific ones to groups A and B.
C-role 1
A B-role 2
Carl is assigned to group C so he has role 1.
Brenda is assigned to group B so she has roles 1 and 2.
Does this help?
-Michael
Message was edited by: Michael Shea

Difference between add-in Java-Stack and standalone stacks

Hello experts,
is there any difference between a Java-Stack as add-in in ABAP AS and two standalone stacks, aside from that the standalone systems are physically seperated. What other reasons are there to choose the one or the other? Is it performance or scalability? Are there any differences for developers (for example on XI or BI) or is the difference only important for administrators?
Best regards,
David

Hi David,
I've just found the following document is uploaded on SDN.
[How to Deploy SAP NetWeaver: Dual Stack vs. Separated Stacks|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d074d7de-8d55-2b10-1e94-fb2e9d2893d1]
Hope this help you
regards,
Yoshi

What is the difference between using the command "dsmgmt" and the "Managed By" tab when adding users to the local administrators Account on a Read-Only Domain Controller?

When I use the
"dsmgmt" command to add a user to the local administrators account of a RODC I can actually see the user when I use the "Show Role Administrators" parameter. However, I can't see the members of the
group added to the "Managed By" tab of the RODC object in AD. Even though, the users added using
"dsmgmt" and by the "Managed By" tab can all log in locally and have admin rights to the RODC. Are there any differences between these two ways of adding users to the local administrators account?

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Difference between web dynpro java and web dynpro abap

Hi this is watson maureen,
I wnat to know what is the difference between web dynpro java and web dynpro abap?
thank
maureen

Hi watson,
Go through these links, you will get the difference between web dynpro java and web dynpro abap
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e4940c-035c-2b10-0b9d-eb8f99674f4e
Web Dynpro: ABAP or Java?
Regards
Sreedhar.

What is the difference between the normal function module and bapi function

hi,
what is the difference between the normal function module and bapi function module.

Hi
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Anji

What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?

Hi,all!
What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
Why there have two JRE? Which one we should use?

JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com

BPM 11g: JAVA API and Webservice API

Who knows BPM 11g: JAVA API and Webservice API?
Customer want to call BPM 11g between Heterogeneous systems, such .net framework. One way is use webservice API, I think, but where can find it? thank you

When you create a BPM application in 11g, you're actually creating a SOA composite application with a BPMN component in the composite. From within the BPMN editor, you can specify the interface (parameters) of each start node in the process. If you select a start node, look at the implementation tab, you'll see a properties group that lets you define the interface one property at a time, or by selecting an interface from the catalog.
By defining these properties you're also defining the shape of the Web Service interface that will automatically be created in the composite. If you switch to the composite view, you'll see your BPMN process with a wire to it from a Web Service that's generated from the interface defined in the BPMN editor. The naming convention is the BPMN process name with ".service" appended. When you deploy the BPMN process, the web service will also be deployed, since it's also part of the composite. From Enterprise Manager (EM) you can test the service and get the WSDL, which could be used by other applications (e.g. .NET) to start and interact with a process instance.
This is one of the advantages of the 11g architecture. The composite exposes services to consumers/clients. The implementation could have been BPEL, BPMN, a Mediator, Java/EJBs, or any combination working together. To the consumer, it's just a web service.
In case your next question was about security ... you won't see properties about security in the BPMN editor. You use Web Service Manager to apply security or other constraints to the web service endpoint.

What is the difference between version 4.7 EE and ECC 6.0 in SD module.

Hi SAP Gurus,
what are the features in 4.7 EE version in general.
what are the features in ECC 6.0 version in general.
then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
if u give the information, then u will get the rewards.
Regards,
somu.

Hi Somu,
These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
12.Price Catalog (PRICAT): Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
14.SAP Role: Internal Sales Representative:-SAP role internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
I hope it will help you
Regards,
Murali.

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between HR Forms Smartforms sapscript and PE51

Hai all,
Could anyone give me the exact difference between HR Forms Smartforms sapscript and PE51.
Thanks in advance,
S.Jenibalet.

HR Forms
The Layout Editor can be used is Adobe Designing tool or Smart form Tool.
The HR Forms Workplace (which will be called the Forms Workplace from now
on) will enable you in future to create flexible reports with an attractive layout for HR master data,
personnel time data, and payroll results.
Smartforms
SMARTFORMS as the SAPScript successor tool is also used to generate formatted documents which can contain logos, tables and other formatting objects. And this documents can look like a pre-printed documents that normal ABAP codes cannot possible.The SAP SmartForms replace the SAPscript forms. SAP SmartForms offer the following advantages: 1)Creating and maintaining forms requiring half the time 2) Adapting forms without any programming knowledge due to entirely graphical user interface 3) Web Publishing using the generated XML output Here you will get some SAP SMARTFORMS tutorials and PDF guides to download.
You use SAP Smart Forms to create and maintain forms for mass printing in SAP Systems. As
output medium SAP Smart Forms support a printer, a fax, e-mail, or the Internet (by using the
generated XML output).
sapscript
SAPSCRIPTS are used to generate formatted documents which can contain logos, tables and other formatting objects. And this documents can look like a pre printed documents that normal ABAP codes cannot possible. SAPscript comprises these five components: 1)an editor for entering and editing the lines of a text. 2)styles and forms for print layout. 3)the composer as central output module. 4)a programming interface 5)several database tables for storing texts, styles and forms. Here you will get some SAPSCRIPTS tutorials and Pdf guides to download.
PE51
There are Limitataions for PE51.You can use only for HR module specifically for Payroll.

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

Difference between F.35 Receivables amount and FBL5N report open items

Hi All,
There is an amount difference between f.35 receivables amount and fbl5n open items amount, I have observed that there are some changes to credit master like risk category and credit representative group, so I thought if we run f.28 it will be right but still difference exits.
If anybody has come across similar issue or if you have any idea on this on how to analyze, please let me know.
Regards,
RK.

Hi ,
Please check the time horizon in credit check used. then compare it with FBL5n.
May be there will be difference in comparison period.
Program RFDKLI20 or F.28 is to run when there is changes in Assignment from company code, entry in customer master data, entry in sales area data, user exit., currency of credit control area , Assignment of customers to credit accounts.
And
Program RVKRED09.--> only the risk class was changed it is sufficient to run
Regards
Atul

Difference between interfaces in Java API and user defined interfaces

Similar Messages

Maybe you are looking for