Different calculation types for one condition

Dear all,
I'm trying to find out, if it's possible to have a condition (in our case freight condition ZKOP) set up with two different calculation types?
Definition of how it should be:
- If the order value is below a specific amout, ZKOP is xxx.xx EUR.
- If the order value is above a specific amount, ZKOP should be calculated as a percentage base of the order value.
Please can you let me know if it's possible and how?
Thanks in advance.
Andreas

TW Typewriter
If the coding is not written correctly, it would definitely affect the system performance.  This is not only for user exit but also will be applicable to routines.  So it makes no difference. 
And is not difficult to get an access key to do this development
Not in all cases.  In some projects, getting an Access Key itself is very difficult and it undergoes cumbersome process from client side.  So we have to take a decision on case to case basis whether to go with routine or user exit.
G. Lakshmipathi

Similar Messages

  • Using two different calculation type  for one condition in purchasing

    hi
    purchasing price must be callculated as the mix of fixed and quantity calculation types, example is below;
    for material A whose purchasing unit of measure is quantity (piece) but base unit of measure is gr.
    1.from 1 gr to 500 gr discount must be 50 usd  as fixed,so 1 gr discount is the same with 499 gr discount.
    2. from 501 gr up to x, 0,10 usd per gr
    for example;
    if quantity = 10 and  total default gr from material 450, discount must be 50 usd as fixed.
    but during good receipt in migo 10 piece can be 600 gr so, price must be calculated as 600*0,10 = 60 usd.
    or vice versa,in purchasing order total gram can be gretaer than the gr which will be used in migo during good receipt .
    if quantity = 10 and  total default gr from material 600, discount must be 60 usd as scaled.
    but during good receipt in migo 10 piece can be 450 gr so, price must be calculated as 50usd as fixed.
    it s a little complicated.
    Thanks in advance.

    TW Typewriter
    If the coding is not written correctly, it would definitely affect the system performance.  This is not only for user exit but also will be applicable to routines.  So it makes no difference. 
    And is not difficult to get an access key to do this development
    Not in all cases.  In some projects, getting an Access Key itself is very difficult and it undergoes cumbersome process from client side.  So we have to take a decision on case to case basis whether to go with routine or user exit.
    G. Lakshmipathi

  • Want to use different valuation type for one finish in house prod. materia

    Hi,
    Please update on subject requirement of different valuation type for same finish in house produced material.
    We take e.g. as below
    Valuation type -1) VA01
                             2) VA02
    Want to assign both valuation types to material FINISH01
    Then, i want create process order as per valuation type VA01 & VA02 ,let consider for 5 quantity each. While creating process
    order, system shoulf propose selection of valuation type.
    Regards,
    Chetan

    Hi,
    use Split Valuation, When u do the GR against production order...System will ask valuation type.
    and Same material code with maintained with different valuation type in your inventory.
    Regards,
    Pardeep Malik

  • Posting to Two different GL account for one condition type

    Hi All,
    In MM pricing procedure we are assigning one new condition type as Management Exp Charges.
    we creat two Transaction/Event key and assigned one in ActKy Colum and another in in Accural column.
    Suppose we are charging  10 $ towards Management Exp.
    Is there any way to Post 10$ in two different GL account.
    DR.Expnses account (As per GL assigned in Actky column) 10$
    Cr. Expenses Accural charges ( GL aasigned in accural Colum) 10$
    Howevre as per our current setting it was Cr to Accural account but for debit transaction it was going to stock/gain account.
    please help us to resolve this issue.
    Thanks in advance
    Regards,
    Lokanath

    Hi
    Can u specify why the customer two interest rates for one loan type.  Is the interest on loan going to change for any periodicity.
    Other wise you can create two loan types with nearest understandable naming convenction and use them for your business requirement.  Which ever is applicable for the employee can be selected by your customer.
    Brs
    Kenu

  • Create 2 different delivery types for one sales order

    Hi,
    When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products,  return packages and ordered items) into one sales order.
    However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
    We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
    Thanks,
    Assaf tzur

    Dear Assaf,
    Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
    If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
    I hope this will help you,
    Regard,
    Murali.

  • Different Valuation types for one process oder

    Hi,
    We have a requirement like valuation type in the process order should not get copied from the confirmation and the valuation type should be dynamic and different for each confirmation of the process order. Can any one tell me whether there are any costom setting for this scenario.
    If there are no custom settings Can we do core modifications to the program to clear the value of valuation type in the process order. If we clear valuation type manually will there be any effects to any of the programs based on the valuation type.
    What is the purpose of valutaiton type . Please specify any documens that i can refer for valuation type field in process order.
    Thanks,
    NN.

    Hi,
    The valuation type assigned to the material & not to the order.
    The valuation types are used to idetify how the material was processed.
    As Some stocks of a material can be procured externally. Others are
    produced internally. Using the valuation type  , you can assign your
    "bought-out" stocks and your "made-in" stocks to different accounts and
    valuate the "bought-out" stocks at different prices to the "made-in"
    stocks. Such stocks can be subject to different price controls.
    regards,
    K.Subhash

  • Can we maintain differant Symbolic accounts for One Wage type?

    Hello,
    May you plz, clarify my doubt? Can we maintain differant Symbolic accounts for One Wage type?

    HI,
    Yes u can maintain any no of symbollic accounts for one wagetype...
    A wage type can be assigned to several symbolic accounts. This is usually the case for wage types that should be posted as both expenses and payables (for example, wage types for the employer’s contribution for social insurance).
    U can also check this in link...
    http://help.sap.com/saphelp_47x200/helpdata/en/f3/21e091110b4e46983af70d772a40b2/frameset.htm
    Hope this solves ur issue
    Reward if helpful
    Asha

  • Difference between alternative calculation type and alternative condition b

    What is the difference between alternative calculation type and alternative condition base value?

    Hi Nitin
    Alternative calculation type:
    Suppose my gross price (PB) is Rs.100 for some metal per kg and I want to calculate surcharge based on todays RBI index of commodity rather than simply giving some 2%. I want to account todays RBI index in determinig Condition value.
    It is possible to do that by little alteration of regular routine.
    Alternate Condition base value:
    I am procuring 5 different variety of pens at different quantities at varying rates from 0 to 25 in a sing le PO. And I get the total header value of 1000. I will get a discount of 10% if the PO value reaches 1000. I have to subsequently pass on the discount of Rs.100 now to all the 5 line items. In general SAP calculates it based on the values of each line item and proportionately distributes. However If i want this discount to be distributed according to the quantity of each pen. You can acheive this with little alteration of Routine.
    Hope this clarifies your doubt.
    If found helpful, Pls reward.
    Regards
    edwin

  • Different movt. types for GR against Purchase order and GR against Prd. Ord

    All SAP Gurus,
    Is it possible to have Different movement types for GR against Purchase order and GR against Production Order?
    Regards,

    yes my friend ,
    I dont know abt 131 movement type,i think so it is related to RUN SCHEDULE HEADER(rep scenario),order type is different to that in discrete.
    But you can do one thing for sure,you can try to create a new movement type copy of 101,and make MIGO allowed for the movement type,and you can easily distinguish between two movement type used for receipt two different functions....
    Plz correct me
    Enjoy SAP
    Rahul..

  • Is It Possible To Create Different Personnel Number For One Employee

    HI Experts,
            My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
    1. How to generate 3 different Personnel number for One employee?
    2. How these 3 Personnel number should get linked, if want to get report for this one employee?
    Kindly help me.
    Thanks,
    Lavanya
    Message was edited by: Sikindar A

    Hi Lavanya,
    Your requirement can be fulfilled but not recommended...
    As you want to generate different position number at different stage of employment....
    i.e Trainee to Probation to Permanent...
    First go for Trainee Position Hiring ....  and generate first Number Say 5000000
    Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
    This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
    Similarly,, you can do for Permanent employee...
    Once training or Probation period gets completed you can lock/ separate that employee  number
    Report ...
    You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
    Hope this should sort your issue..
    Regards,
    Veeram

  • TS3510 I have 3 different apple devices using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I found this on a related question in the Community:
    Yes you can do it. I do it with 4 different devices all using the same Apple ID.
    You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
    You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
    Take a look at this for more information.
    The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern.  If this other post is correct, how to I set a different "contact at" in the iPod Touch?
    Goose

  • Different movement types for goods issue via outbound delivery

    Hi gurus,
    How can I use different movement types for goods issue via outbound delivery?
    Thanks&Best Regards,
    Burcu

    To use different schedule lines, we need different item types and different document types. Is that right?
    Is there a user exit in outbound delivery to post goods issue?
    Thanks...

  • Different movement types for Goods Issue for different Order Types

    Hello Experts,
    Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
    Thanks and regards,
    Satyajit

    Satyajit,
    Folow the link given,
    Re: How to add new movement types when creating reservation?
    Hope this helps you.
    SmanS

  • Different Document Type for a standard transaction

    Dear all,
    Iu2019m facing the following problem: I wish to set a different Document Type for a standard transaction.
    In the specific, I need a different DT for Reverse Document (T-code FB08) instead of standard SA.
    Is that possible?
    Thanks in advance
    Alberto

    Go to OBA7, click on doc type of the original document (which I guess is SA) and then update the field "Reverse Doc Type" to the doc type you want to.

  • Different payment method for one invoice

    Hello everyone
    Is it possible to have multiple payment method for one invoice? As my client want to pay different payment method for one invoice.
    Could you please advise?
    Kind regards

    Yes. You can provided if you split the invoice amount into multiple payments under scheduled payments tab in invoice workbench.

Maybe you are looking for