Different deployment.properties for Multiversion

Hi Folks,
I need to run JRE 1.6 and 1.7 on the same machine. Problem is, that MIXCODE must be disabled in deployment.properties. But only for JRE 1.6 (intalled as STATIC).
The JRE 1.7 as standard JRE should normally run in MIXCODE ENABLE Mode.
Is there any kind of a chance using two different files or JRE specific parts inside one file?
Thanx

You need to setup two additional templates - one for the print-only and the other for online - that have just the tags (Character or Paragraph) that you want to behave differently, e.g. your hypertext tag. Then set the attributes for those tags as you need them for print (or online) without changing their names.
Apply the appropriate template to your book (i.e. all of the files in the book) to create the desired PDF version. With these two different templates, you can then toggle very quickly between print & online versions.

Similar Messages

Distributing a deployment.config and deployment.properties for proxy settings.

I am trying to define the minimum config required to populate a deployment.properties with just proxy settings and point to this with a deployment.config.
I am finding that that recent versions of 1.7 and 1.8 do not adhere to the browsers settings properly and not all traffic is following the proxy rules in use by the browser. However, if I manually override all traffic to a proxy the applets running on internet based sites function (no intranet sites use java here). If I use a deployment.config, I can see the resulting proxy settings are enabled in the control panel app and the appear exactly the same as per user manual settings, however they are not correctly used.have any ideas?
Any one have any ideas?.
Thanks

Hi Kevin,
I am actually working on the same problem.
I need to deploy Java 1.4.2_07 on clients with a mandatory setup. I tryied the deployment.config and deployment.properties file but didn't get it working yet.
I guess we should share knowledge to find a working solution.
It would be nice, if you could email me at:
[email protected]
regards,
Volker

Deployment properties on web analysis

Hi All,
we are deploying Web Analysis on Citrix Environment.
everytime user logs in his java heap settings gets erased.
How do we set up deployment properties for roaming profiles.
please help.

Hi there did you get any answers to any of the following questions? In particular point 4.

JRE deployment.properties set value problem

hi,
I'd like to set the deployment.javapi.jre.1.5.0_08.args listed in deployment.properties with another two values
-Xmx256m
-Xms128m
These are my existing lines in deployment.properties:
deployment.javapi.jre.1.5.0_08.osname=Windows
deployment.javapi.jre.1.5.0_08.args=-Djavaplugin.classloader.cache.enabled\=false
deployment.javapi.jre.1.5.0_08.osarch=x86
deployment.javapi.jre.1.5.0_08.path=C\:\\Programme\\Sun\\Java\\jre1.5.0_08
The Sun deployment guide is not any help, because there's no ducumentation about multiple value settings.
I already tested unsuccessfully
blanks (deployment.javapi.jre.1.5.0_08.args=-Djavaplugin.classloader.cache.enabled\=false -Xmx256m -Xms128m),
pipes (deployment.javapi.jre.1.5.0_08.args=-Djavaplugin.classloader.cache.enabled\=false|-Xmx256m|-Xms128m),
plus (deployment.javapi.jre.1.5.0_08.args=-Djavaplugin.classloader.cache.enabled\=false+-Xmx256m+-Xms128m),
masked blanks (deployment.javapi.jre.1.5.0_08.args=-Djavaplugin.classloader.cache.enabled\=false\ -Xmx256m\ -Xms128m),
Any hints or help?
Thank you very much for your help

I'm having the same problem as well. Java 7u21 (32bit), win7 64bit. All i'm trying to do is set
deployment.security.level=MEDIUM
in my deployment.properties, but it won't work, i have exactly the same deployment.config as the OP.
I have noticed, if i go into the user deployment.properties for the user (C:\Users\<name>\AppData\LocalLow\Sun\Java\Deployment\deployment.properties), and delete the file, nothing changes (a new one just gets created with the non system wide settings). HOWEVER, if you open that user deployment.properties file, and remove the entries that you are trying to configure via the system wide deployment.properties, then the system wide deployment.properties comes into play and works.
But obviously this is not something I want to have to do on every work station.

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

So how to specify different answer file for different install images in WDS snap-in?

hello
in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
now this one answer file applies to all of them ?
so how to specify different answer file for different install images in WDS snap-in?
thanks in advanced

Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
have a personal unattend-file.
hi Joel
very cool. thanks a lot, that really helped me.
best regards

User level deployment.properties, setting args

hi guys
i am updating the user's deployment.properties as i need to customise runtime behaviour for my applet. this is an internal work thing so dont worry about security etc..
i am running applet jre1.5.0_06 and have the line below in my deployment.properties :
deployment.javapi.jre.1.5.0_06.args=-Xmx128m
but my colleage's file is totally different :
javaplugin.jre.params=-Xmx128m
would the second one be more universal across jre versions? or would it even work on some jres?
thanks!

I did something very similar. I am using jre 1.5.0_01.
And it seems to work!
The deployment.config is:
deployment.system.config=file:/c:/jws/deployment.properties
deployment.system.config.mandatory=true
and the deployment.properties is (at the location above):
deployment.system.cachedir=cache
To load the cache I start javaws as follows:
javaws -import -system -codebase file:/c:/cd file:/c:/cd/notepad.jnlp
This results in creating the cache in
file:/c:/jws//cache
To start the app I did:
javaws -system http://java.sun.com/products/javawebstart/apps/notepad.jnlp
The -system seems to be neccessary but I am not quite sure. If it is omitted
the app also starts, but javaws stores just the jnlp in the default user cache!

Missing properties for ADMINS group in security property file

Hi,
I'm getting the following error while trying to start the J2EE server
how to overcome this
SAP J2EE Engine Version 6.20 PatchLevel 67440.20 is starting...
Loading: LogManager ...
Loading: SystemThreadManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: SwapManager ...
Loading: LockManager ...
Loading: R3StartupManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service p4 ... done.
Starting core service monitor ... done.
Starting core service log ... done.
Starting core service file ... done.
Starting core service dbms ... done.
ID000544: Error starting service security. Unexpected exception: java.lang.SecurityException: Missing properties for ADMINS group in security property file!!!
[ServiceManager]: ID000544: Error starting service security. Unexpected exception: java.lang.SecurityException: Missing properties for ADMINS group in security property file!!!
Exception in core service. Kernel not started.
[ServiceManager]: * Exception in core service. Kernel not started.
Loading: ServiceManager returned false!
Kernel not loaded. System halted.
Element 1779446621 disconnected.
System Exception * Fail to start Naming. Exception is: java.lang.NullPointerException
ThreadDeath catched in deploy when trying to start it. Rethrowning...
[ServiceManager]: ThreadDeath catched in deploy when trying to start it. Rethrowning...
Starting core service naming ... done.
ThreadDeath catched in admin when trying to start it. Rethrowning...
[ServiceManager]: ThreadDeath catched in admin when trying to start it. Rethrowning...
Message was edited by: Lakshmi Manohar

Hi,
As I understand, you are using SharePoint designer worfklow on 2013 platform and you would like to edit cancelation email body for task process.
From my experience, there is no OOB option for you to edit cancelation email body. Since workflow 2013 is different from 2010, task forms are auto-generated based upon a certain Content Type. As workaround, I'd recommend you using approval workflow on 2010
platform. In addition, you could try codeplex 2013 approval workflow, please check the link below:
http://sharepointwf.codeplex.com/
More information:
http://blogs.msdn.com/b/sharepointdesigner/archive/2012/09/14/how-to-manipulate-the-task-form-with-sharepoint-designer-for-new-task-actions.aspx
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.workflowservices.activities.singletask.cancelationemailbody(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

Defining server specific properties for EJB app

I need to define some properties for my app which have different values depending on the server to which I deploy. Eg. the LDAP server name and port.
When I deploy to my development server it should find the local values of the properties, when I deploy to the live server it needs a different set of values.
What is the simplest way to do this? I obviously don't want the properties to be part of my deployment.
Rob

EJBs are not allowed to read or write files. But they are allowed to read from the JNDI context. The idea is to provide a symbolic name, ie <resource-env-ref>, which contains the value you need.
The startup-classes which could set this value in the JNDI context are best documented in the OC4J User's Guide.
--olaf

JRE7Update25 Deployment Properties File Not Working And Cant Disable Next Gen Plugin

Good Day
Our organisation needs to deploy JRE7U25 to over 4000 workstations. Our desktops are running the following Windows and IE combinations:
WinXP 32 Bit/IE7
WinXP 32 Bit/IE8
Win7 32 Bit/IE8
Win7 32 Bit/IE9
Win7 64 Bit/IE8
Win7 64 Bit/IE8
We use the 32bit JRE installer across all environments and all IE browsers use 32Bit IE. On all of our environments the Deployment.properties and config files no longer work due to what appears to be a bug in the JRE7U25 installer. Our deployment files are as follows:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
deployment.security.level=MEDIUM
deployment.security.level.locked=
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
deployment.security.mixcode=HIDE_RUN
deployment.security.mixcode.locked=
deployment.console.startup.mode=HIDE
deployment.console.startup.mode.locked=
Both files are being copied to the following location:
C:\Windows\Sun\Java\Deployment
After the installer runs and deployment files are copied to the workstation the deployment.properties and config files look like this:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
#System Deployment Properties
#Mon Jul 01 12:29:20 CAT 2013
deployment.security.level=MEDIUM
I have tried changing the deployment.config file as follows in an attempt to fix this to no avail:
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
5. deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
None of the above mentioned works. So all our required settings in the deployment.properties file are being overwritten when opening the Java console? Our other major problem is that Changing the registry key to 0 in order to disable the next generation plugin does not disable the next generation plugin in Jre at the usual location as it worked for us machine wide (across multiple profiles for JRE6U29):
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\10.25.2]
"UseNewJavaPlugin"=dword:00000000
^^I have observed on a fresh install of JRE7U25 that the above mentioned registry key no longer exists in this version so a computer wide disablement of this option is no longer possible via the registry.
On our 32Bit and 64bit machines running the 32 bit JRE 7U25 client when we disable the next generation plugin it keeps enabling itself again. Even when we run the javacpl.exe to run as administrator by changing the compatibility settings and disabling the next generation plugin it enables itself again. This is a huge problem for us because our company Oracle web based applications need this plugin to be disabled in order to run the apps properly.
These are major obstacles for our deployment as we desperately require assistance or any advice in addressing these issues as there appear to be numerous bugs with the JRE7U25 release. Thank you in advance.
Update 7 July 2013:
I have observed that if you have the following options in your Deployment.config file it doesn't allow our java webstart apps which use jnlp extensions to run.
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
The jnlp file association is also broken on Windows XP workstations with JRE7U25. We are having to manually associate the .jnlp file extension with javaws.exe on workstation for Web start apps or else users cannot lauch JRE whn clicking on .jnlp links.
The only Deployment.config syntax which allows our Webstart applications to run is as follows:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
What a mess!

I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.

HELP PLS -exception in deploy transformation for "0ANALYSIS_PATTERN"

Hi All,
I have a serious problem here. Please help me here...thanks
We have recently upgraded our BI 7.0 system from BI ABAP - 10 to
Support Package Stack - 16, which includes BI ABAP - 18 and BI JAVA -
16. After the upgrade we are facing problems running any query on the
portal. We get the same consistent error throughout. The portal error
message is enclosed. I tried installing 0Analysis_Pattern many times
but it didn't work.
Secondly when that didn't work I tried running RSPOR_SETUP, in step 2 I
get the error message, Different ABAP and JAVA support package.
SAP came back with a reply saying to do BI JAVA config using template installer. We did that, all looks fine. We also ran the Netweaver Diagnostic tool and all looks fine there as well except the ADS is not configured( I doubt this error is anything to do with ADS as we are not using abode export)
We went through all these notes, 917950, 937697 and 983156 for the configuration.
But again when we run the RSPOR_SETUP we get the same error message: Different ABAP and JAVA support package
Also I ran queries using RSRT ....when I execute using the ABAP Web works fine but opens in port 8000, but when I execute using JAVA web it throws the same error message again as below using port 50000. Also I get the same error message when I open 0ANALYSIS_PATTERN using WAD and try to execute it.
Has anyone faced this problem before?
Error message below
500 Internal Server Error
BEx Web Application
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
General exception in deploy transformation for object "0ANALYSIS_PATTERN"
com.sap.ip.bi.base.exception.BIBaseRuntimeException: General exception in deploy transformation for object "0ANALYSIS_PATTERN"
at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:555)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:90)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:128)
Log ID 0017A4AB12A7006B00000395000016180004605B78DEE173
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000016 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0018 - Description: SAP NetWeaver BI 7.0 (GBDCLNT100) - Additional info: - Production mode: true
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_15-b02
Operating System Windows 2003 - ia64 - 5.2
Context
ACCESSIBLE false
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
DEBUG_TEXTS false
DEFAULT_FONT
DISPLAY_STACK_TRACE_IN_ERROR_PAGES true
LANGUAGE en
Master System Alias GBDCLNT100
NAVIGATION_NODE_ACTIVE_IVIEW pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex
PROFILING false
Query String (Initial Browser Request) QUERY=TEST30
RTL false
Request URL
SAP_BW_IVIEW_ID pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex
SERVER_URL_PREFIX
THEME_NAME sap_tradeshow
TRACE false
TRAY_TYPE PLAIN
Time Tue Jan 13 11:24:52 GMT 2009
USE_HTTPS_FOR_ADS false
USE_SAP_EXPORT_LIB false
User SERCOWNKN (USER.R3_DATASOURCE.SERCOWNKN)
VALIDATION_DATA false
Deployed SCAs
SCA Version SP Patch Compiled Deployed
ADSSAP 7.00 16 0 2008-06-10 11:48:09 BST 2008-12-29 12:21:02 GMT
BASETABLES 7.00 16 0 2008-06-10 12:02:26 BST 2008-12-29 12:02:50 GMT
BI-BASE-S 7.00 17 23 2008-12-24 10:27:08 GMT 2009-01-07 11:53:24 GMT
BI-IBC 7.00 16 0 2008-06-10 17:29:06 BST 2008-12-29 12:45:13 GMT
BI-REPPLAN 7.00 16 0 2008-06-10 18:46:18 BST 2008-12-29 12:59:08 GMT
BI-WDALV 7.00 16 0 2008-06-10 18:46:28 BST 2008-12-29 12:57:58 GMT
BIWEBAPP 7.00 17 23 2008-12-24 10:27:42 GMT 2009-01-07 11:52:59 GMT
BI_MMR 7.00 16 0 2008-06-10 12:03:07 BST 2008-12-29 12:21:38 GMT
BI_UDI 7.00 16 0 2008-06-10 12:03:25 BST 2008-12-29 12:30:20 GMT
CAF 7.00 16 0 2008-06-10 19:14:45 BST 2008-12-29 12:34:53 GMT
CAF-KM 7.00 16 0 2008-06-10 18:52:06 BST 2008-12-29 13:12:43 GMT
CAF-UM 7.00 16 0 2008-06-10 19:14:53 BST 2008-12-29 12:22:26 GMT
CORE-TOOLS 7.00 16 0 2008-06-10 12:06:18 BST 2008-12-29 12:03:19 GMT
EP-PSERV 7.00 16 0 2008-06-10 17:37:42 BST 2008-12-29 13:00:07 GMT
EP-WDC 7.00 16 0 2008-06-10 15:20:00 BST 2008-12-29 13:01:10 GMT
EPBC 7.00 16 0 2008-06-10 17:36:02 BST 2008-12-29 12:23:03 GMT
EPBC2 7.00 16 0 2008-06-10 17:36:14 BST 2008-12-29 13:01:15 GMT
EP_BUILDT 7.00 10 0 2006-10-24 18:44:00 BST 2007-10-03 17:16:57 BST
JLOGVIEW 7.00 16 0 2008-06-10 11:07:00 BST 2008-12-29 12:03:55 GMT
JSPM 7.00 16 0 2008-06-10 11:07:00 BST 2008-12-19 11:42:33 GMT
KM-KW_JIKS 7.00 16 0 2008-06-10 12:09:28 BST 2008-12-29 12:23:19 GMT
KMC-BC 7.00 16 0 2008-06-10 17:38:03 BST 2008-12-29 13:02:33 GMT
KMC-CM 7.00 16 0 2008-06-10 17:38:59 BST 2008-12-29 13:03:37 GMT
KMC-COLL 7.00 16 0 2008-06-10 17:39:23 BST 2008-12-29 13:04:00 GMT
LM-PORTAL 7.00 16 0 2008-06-10 18:55:57 BST 2008-12-29 13:04:05 GMT
LM-TOOLS 7.00 16 0 2008-06-10 19:19:13 BST 2008-12-29 12:40:40 GMT
NET-PDK 7.00 16 0 2008-06-10 17:39:31 BST 2008-12-29 12:53:38 GMT
RTC 7.00 16 0 2008-06-10 17:39:47 BST 2008-12-29 12:53:44 GMT
RTC-STREAM 7.00 16 0 2008-06-10 17:39:48 BST 2008-12-29 12:44:16 GMT
SAP-EU 7.00 16 0 2008-06-10 18:57:14 BST 2008-12-29 13:11:27 GMT
SAP-JEE 7.00 16 0 2008-06-10 12:14:29 BST 2008-12-29 12:04:52 GMT
SAP-JEECOR 7.00 16 0 2008-06-10 12:16:00 BST 2008-12-29 12:08:11 GMT
SAP_BUILDT 7.00 10 0 2006-10-21 20:06:00 BST 2007-10-03 17:17:12 BST
SAP_JTECHF 7.00 16 0 2008-06-10 12:17:05 BST 2008-12-29 12:09:31 GMT
SAP_JTECHS 7.00 16 0 2008-06-10 12:24:43 BST 2008-12-29 12:29:00 GMT
UMEADMIN 7.00 16 0 2008-06-10 19:27:45 BST 2008-12-29 12:41:03 GMT
UWLJWF 7.00 16 0 2008-06-10 17:40:28 BST 2008-12-29 13:04:23 GMT
VCBASE 7.00 16 0 2008-06-10 17:40:33 BST 2008-12-29 13:13:00 GMT
VCFLEX 7.00 16 0 2008-06-10 17:41:04 BST 2008-12-29 12:55:50 GMT
VCFRAMEWORK 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:56:00 GMT
VCKITBI 7.00 16 0 2008-06-10 17:34:47 BST 2008-12-29 12:44:17 GMT
VCKITGP 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:44:20 GMT
VCKITXX 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:44:21 GMT
WDEXTENSIONS 7.00 16 0 2008-06-10 18:58:51 BST 2008-12-29 13:13:18 GMT
Full Exception Chain
Log ID 0017A4AB12A7006B00000395000016180004605B78DEE173
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "0ANALYSIS_PATTERN from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:95) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:128) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:113) at com.sap.ip.bi.webapplications.runtime.base.PageObject.doInit(PageObject.java:286) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:261) at com.sap.ip.bi.webapplications.runtime.base.ItemRenderer.init(ItemRenderer.java:39) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:4995) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:5342) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:6537) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:6249) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:415) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:330) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:175) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSuper(Page.java:1821) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1787) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:2497) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4018) at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3021) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2864) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:362) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:279) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: General exception in deploy transformation for object "0ANALYSIS_PATTERN" at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:555) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:90) ... 63 more

Hi,
Please help.
How did you manage to resolve this. I have similar issues.
I have SAP_ALL and can run the reports without problems but users have error message
general exception in deploy transformation for object "WEB_TEMPLATE"
thanks

What are the XFA properties for a drop-down list?

I am having trouble distinguishing between the "Text" and "Value" for a drop down list.
I have a data drop-down list that is being populated by a database at runtime. I am using the "addItem" event while looping though the recordset. The "addItem" event takes 2 parameters:
param1: A valid string representing the value to display in the field.
param2: (Optional) A valid string representing the new items bound value. If empty, the default value is an empty string.
What is the corresponding XFA properties for param1 and param2?
If I want to reference "param2" somewhere else in the form, is it dropDownList.rawValue? is it dropDownList.value?

reviewed the sample.zip form and xml file. The XML format is different from my file. Your file has one field named "item" with 3 records. <data> - <field> <item>1</item> <item>2</item> <item>3</item> </field> </data> My XML file has multiple fields and records. I need to populate the dropdown list with 1 field from XML file/DataConnection and bind the remainder of the DataConnection fields to the form fields. How can I achieve above with the sample example? This is a portion of my xml file. <?xml version = '1.0'?> <ROWSET> <ROW num="1"> <ORG_OPER_NAME> U. S. OIL AND GAS, INC.</ORG_OPER_NAME> <ORGANIZATION_ID>6285</ORGANIZATION_ID> <OPERATION_TYPE_CODE>01</OPERATION_TYPE_CODE> <ORGOP_LINE_ID>1</ORGOP_LINE_ID> <ADDRESS1>P. O. BOX 9158</ADDRESS1> <CITY>HOUMA</CITY> <STATE>LA</STATE> <ZIP>703610000</ZIP> <CONTACT_NAME>ANTHONY P. AUTHEMENT</CONTACT_NAME> <PHONE_NUM>9858764651</PHONE_NUM> </ROW> <ROW num="2"> <ORG_OPER_NAME>103 TRUCK STOP, INC. </ORG_OPER_NAME> <ORGANIZATION_ID>101152</ORGANIZATION_ID> <OPERATION_TYPE_CODE>13</OPERATION_TYPE_CODE> <ORGOP_LINE_ID>1</ORGOP_LINE_ID> <ADDRESS1>4007 WHITE'S FERRY RD. </ADDRESS1> <CITY>WEST MONROE</CITY> <STATE>LA</STATE> <ZIP>712910000</ZIP> <CONTACT_NAME>103 TRUCK STOP, INC. </CONTACT_NAME> <PHONE_NUM>3183966200</PHONE_NUM> </ROW> <ROW num="3"> <ORG_OPER_NAME>3 S COMPANY</ORG_OPER_NAME> <ORGANIZATION_ID>5699</ORGANIZATION_ID> <OPERATION_TYPE_CODE>01</OPERATION_TYPE_CODE> <ORGOP_LINE_ID>1</ORGOP_LINE_ID> <ADDRESS1>RR #2, BOX 99</ADDRESS1> <CITY>EUREKA SPRINGS</CITY> <STATE>AR</STATE> <ZIP>726320000</ZIP> <CONTACT_NAME>NO CONTACT GIVEN</CONTACT_NAME> </ROW> <ROW num="4"> <ORG_OPER_NAME>3-T EXPLORATION, INC.</ORG_OPER_NAME> <ORGANIZATION_ID>6847</ORGANIZATION_ID> <OPERATION_TYPE_CODE>01</OPERATION_TYPE_CODE> <ORGOP_LINE_ID>1</ORGOP_LINE_ID> <ADDRESS1>BANKONE TOWER</ADDRESS1> <CITY>WICHITA FALLS</CITY> <STATE>TX</STATE> <ZIP>763082825</ZIP> <CONTACT_NAME>NO CONTACT GIVEN</CONTACT_NAME> </ROW> <ROW num="5"> <ORG_OPER_NAME>3-T OIL CO. INC.</ORG_OPER_NAME> <ORGANIZATION_ID>6395</ORGANIZATION_ID> <OPERATION_TYPE_CODE>01</OPERATION_TYPE_CODE> <ORGOP_LINE_ID>1</ORGOP_LINE_ID> <ADDRESS1>RT. 1, BOX 81</ADDRESS1> <CITY>WEIRGATE</CITY> <STATE>TX</STATE> <ZIP>759770000</ZIP> <CONTACT_NAME>NO CONTACT GIVEN</CONTACT_NAME> </ROW> </ROWSET>

$USER_HOME variable not working in Java7u55 deployment.properties file.

I'm trying to setup a separate cache directory for an AppV Java 7u55 package. In the deployment.properties file I created the following entry:
deployment.user.cachedir=$USER_HOME\\AppData\\LocalLow\\Sun\\Java\\Deployment\\Java7cache
But upon initiating an application I do not see the folder created and populated with cache data. This is what I see in the Java7 control panel for the cache path after my edit:
My question, is $USER_HOME still a valid variable for use in the deployment.properties file and if so what is the path that it points to?
UPDATE: So I did find where at least for me this path led to on my desktop a directory called $USER_HOME was created with the rest of the above location following it. Is this correct?
How can I my current setup deployment.user.cachedir=$USER_HOME to go to this location: C:\users\<user account>\AppData\LocalLow\Sun\Java\Deployment\Java7cache\ ???

I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.

Webservice client : different wsdl file for test/production environment

In an ADF application, I need call a web service in model project
In my company, we have 2 environments : test and production.
This webservice is deploye in test server and production server.
So there are 2 different wsdl file for test/production.
I want to make my ADF Application portable cross the 2 environments.
An environment variable can indicate in which environment the ADF application run.
According to this variable, application choose which wsdl/endpoint to call.
If I use "web service Data control" wizard, how can I achieve this?
If I use "webservice proxy" wizard, how can I achieve this?
Thanks!!!!!!

Hi,
I have a model project with ws proxy client and on this proxy I added an adf ws connection called CustomerExperience
then I can do this.
// a test to try to overrule the adf ws connection from EM
Context ctx = null;
try {
ctx = ADFContext.getCurrent().getConnectionsContext();
WebServiceConnection wsc = (WebServiceConnection) ctx.lookup("CustomerExperience");
CustomerExperience customerExperience = wsc.getJaxWSPort(CustomerExperience.class);
} catch (NamingException e) {
LOGGER.severe("got web service loading fault: "+ e.getMessage());
throw new JboException( messages.getString("NOM-999"),
"NOM-999",
null );
I exported this to an adf jar and added this to a webapp.
On runtime the ws connection is not dectected by the webapp so need to copy this ws conn to the connections of the webapp. This works
but can I change it from wlst instead of EM , is this possible?
I don't see the WS connection in wlst (oracle common) adf_listURLConnection('CE_Portal')
thanks

JRE run-time arguments in deployment.properties file all versions of PlugIn

G'day,
A user can specify the run-time arguments for the JRE via the Java Plug-In's control panel. This results in a (property, value) pair being written to the user's deployment.properties file. I'm trying to compile a list of the property names used by various versions of the Plug-In. Here's what I have so far:
1.4.2_*
javaplugin.jre.params
i.e. one set of run-time arguments for all JREs known to the plug-in.
1.5.0_*
deployment.javapi.jre.V.args
where V is a JRE version number, e.g. 1.5.0_16, i.e. custom run-time arguments for all JREs known to the plug-in.
1.6.0_00 .. _07 ("classic")
deployment.javapi.jre.V.args
where V is a JRE version number, e.g. 1.6.0_07, i.e. custom run-time arguments for all JREs known to the plug-in.
1.6.0_10 .. ("next generation")
deployment.javaws.jre.N.args
where N is an index into the list of JREs known to the plug-in, i.e. custom run-time arguments for all JREs known to the plug-in.
These have been determined by sampling a couple of updates for each of the X.Y.Z versions listed above, i.e. not an exhaustive test by any means. Therefore, if you could expand on this, esp. pre-1.4.2, post 1.6.0, assuming they use the same deployment.properties mechanism, it'd be appreciated.
Thanks,
Chris.

Read U area of process.
You can get argument list from U area.
Though U area is not kerenl, you may be careful to read data using copyin() functions.
Good luck,
Chun-Mok Chung

Different deployment.properties for Multiversion

Similar Messages

Maybe you are looking for